Wall DCQEB50-24S12 Up to 50 watts output power Datasheet

DATASHEET
Rev B
DCQEB50 SERIES
2:1 Input Voltage Ranges
Industry Standard Quarter-Brick Package
Up to 50 Watts, Single Outputs
DC/DC Power Converters
FEATURES
• Up to 50 Watts Output Power
• Single Outputs
• Output Current up to 20A
• Industry Standard Quarter-Brick Package: 2.28” x 1.45” x 0.50”
• Under Voltage Lockout
• Fixed Switching Frequency
• Input to Output Isolation: 1600VDC
APPLICATIONS
•
•
•
•
•
Telecom/Datacom
Wireless Networks
Industry Control Systems
Semiconductor Equipment
Distributed Power Architectures
OPTIONS
• Heatsinks
• Pin Lengths
• Thru-Hole Inserts
• Negative Logic Remote ON/OFF
• 2:1 Wide Input Voltage Range
• High Efficiency up to 91%
• No Minimum Load Required
• Adjustable Output Voltage
• Threaded Inserts and Thru-Hole Inserts Available
• Short Circuit, Over Voltage, Over Current, and Over Temp. Protection
• Compliant to RoHS EU Directive 2002/95/EC
• CE Mark Meets 2006/95/CE, 93/68/EEC, and 2004/108/EC
• UL60950-1, EN60950-1, and IEC60950-1 Safety Approvals (See Note 12)
DESCRIPTION
The DCQEB50 series of DC/DC power converters provides up to 50 Watts of output power in an industry standard 2.28” x
1.45” x 0.50” quarter-brick package and footprint. This series consists of single output models with 2:1 input voltage
ranges of 18-36VDC or 36-75VDC. Some features include high efficiency up to 91%, adjustable output voltage, remote
sense, and positive or negative remote ON/OFF control. This series is RoHS compliant and has UL60950-1, EN60950-1,
and IEC60950-1 safety approvals (see note 12). Several different options are available for this series including negative
remote ON/OFF control, heatsinks, pin lengths, and thru-hole inserts. Please call factory for more details.
03/09/2012
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 5
DCQEB50 Series
50W, Single Outputs
Quarter-Brick Package
DC/DC Power Converters
Rev B
SPECIFICATIONS: DCQEB50 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Nom
Max
18
36
24
48
36
75
18
36
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Start-up Voltage
Shutdown Voltage
Input Surge Voltage
Input Current
Input Filter
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation
Load Regulation
Voltage Accuracy
Voltage Adjustability (See Note 5)
Output Power
Output Current
Minimum Load
Ripple & Noise
Transient Response Recovery Time
Power Up
Start-Up Time
Remote ON/OFF
Remote Sense (See Note 5)
Temperature Coefficient
PROTECTION
Over Voltage Protection Threshold
Over Current Protection Threshold
Short Circuit Protection
Over Temperature Protection
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Input to Output
Isolation Voltage
Input to Base-plate
Output to Base-plate
Isolation Resistance
Isolation Capacitance
REMOTE ON/OFF (See Note 6)
DC/DC ON
Positive Logic (standard)
DC/DC OFF
DC/DC ON
Negative Logic (optional)
DC/DC OFF
Input Current of Remote Control Pin
Remote Off Input Current
ENVIRONMENTAL SPECIFICATIONS
Operating Base-Plate Temperature (See Note 7)
Storage Temperature
Relative Humidity
Thermal Shock
Vibration
MTBF (See Note 1)
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
15
32
50
100
VDC
+0.2
+0.3
+1.5
+10
%
%
%
%
See Table
L-C Type
See Table
Low line to high line at full load
No load to full load
-0.2
-0.3
-1.5
-20
See Table
See Table
0
Measured at nominal input and full load with 20MHz BW and
1µF M/C and 10µF T/C capacitors in parallel.
25% load step change
%
100
mVp-p
200
25
25
Nominal input and constant resistive load
10
-0.02
Non-latching Hiccup
110
+0.02
120
140
Hiccup, automatic recovery
+110
Nominal input and full load
270
297
2500
Nominal input
Nominal input
-0.5
-40
-55
5
Non-condensing
BELLCORE TR-NWT-000332
MIL-HDBK-217F
µs
ms
ms
% Vo
%/°C
% Vo
% Io
°C
See Table
243
1600
1000
1000
10
For 1 minute
For 1 minute
For 1 minute
2,500,000
356,800
Open or 3V < Vr < 15V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 15V
1
2.5
+100
+125
95
MIL-STD-810F
MIL-STD-810F
KHz
VDC
VDC
VDC
MΩ
pF
mA
mA
°C
°C
% RH
Hours
Hours
1.46oz (42g)
2.28 x 1.45 x 0.50 inches (57.9 x 36.8 x 12.7 mm)
Aluminum base-plate
Safety Approvals
03/09/2012
VDC
VDC
100ms
PHYSICAL SPECIFICATIONS
Weight
Dimensions (L x W x H)
Case Material
SAFETY & EMC CHARACTERISTICS
EMI (See Note 8)
Radiated Immunity
Fast Transient (See Note 9)
Surge (See Note 9)
Conducted Immunity
VDC
EN55022
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
UL60950-1, IEC60950-1, EN60950-1
(DCQEB50-48S1.8, 48S2.5, 48S3.3, and 48S05 have approvals; approvals pending for all other models)
Class A
10 V/m
Perf. Criteria A
±2KV
Perf. Criteria B
±1KV
Perf. Criteria B
10 Vrms
Perf. Criteria A
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 5
DCQEB50 Series
50W, Single Outputs
Quarter-Brick Package
DC/DC Power Converters
Rev B
MODEL SELECTION TABLE
Model Number (12)
Input Voltage
Range
DCQEB50-24S3.3
Output Current
Output
Voltage
Min. load
Full load
3.3 VDC
0mA
15A
Ripple & Noise (4)
Input Current
Output Power
Efficiency (4)
2398mA
49.5W
90%
No Load (3)
Full Load (2)
100mVp-p
65mA
DCQEB50-24S05
24VDC
5 VDC
0mA
10A
100mVp-p
95mA
2394mA
50W
91%
DCQEB50-24S12
(18 - 36 VDC)
12 VDC
0mA
4.17A
100mVp-p
60mA
2413mA
50W
91%
DCQEB50-24S15
15 VDC
0mA
3.33A
100mVp-p
95mA
2392mA
50W
91%
DCQEB50-48S1.8
1.8 VDC
0mA
20A
100mVp-p
65mA
904mA
36W
87%
DCQEB50-48S2.5
2.5 VDC
0mA
20A
100mVp-p
55mA
1240mA
50W
88%
DCQEB50-48S3.3
48 VDC
3.3 VDC
0mA
15A
100mVp-p
70mA
1199mA
49.5W
90%
DCQEB50-48S05
(36 - 75 VDC)
5 VDC
0mA
10A
100mVp-p
65mA
1197mA
50W
91%
DCQEB50-48S12
12 VDC
0mA
4.17A
100mVp-p
35mA
1207mA
50W
91%
DCQEB50-48S15
15 VDC
0mA
3.33A
100mVp-p
40mA
1196mA
50W
91%
NOTES
1. BELLCORE TR-NWT-000332. Case 1: 80% Stress, Temperature at 40°C.
MIL-HDBK-217F Notice2 @Ta=25°C, Full load (Ground, Benign, controlled environment).
2. Maximum value at nominal input voltage and full load.
3. Typical value at nominal input voltage and no load.
4. Typical value at nominal input voltage and full load.
5. Maximum output deviation is +10% inclusive of trim. If remote sense is not being used the +SENSE should be connected to its corresponding
+OUTPUT and likewise the -SENSE should be connected to its corresponding –OUTPUT.
6. The remote ON/OFF control pin voltage is referenced to –INPUT. To order negative logic Remote ON/OFF control add the suffix “R” to the
model number (Ex: DCQEB50-48S05R).
7. Heatsink is optional and P/N: 7G-0029A-F, 7G-0030A-F, 7G-0031A-F, and 7G-0032A-F.
8. The DCQEB50 series meets EN55022 Class A and Class B only with external components added before the input pins to the converter.
9. An external input filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. We recommend Nippon chemi-con KY series,
220µF/100V, ESR 48mΩ.
10. BASE-PLATE GROUNDING: EMI can be reduced when you connect the four screw bolts to the shield plane.
11. The converter is provided with basic insulation.
12. Safety Approvals: DCQEB50-48S1.8, 48S2.5, 48S3.3, and 48S05 have safety approvals; approvals pending for all other models.
13. This series comes with several different options: Negative remote ON/OFF control, pin lengths, thru-hole inserts, and heatsinks.
CAUTION: The power module is not internally fused. An input line fuse must always be used.
Due to advances in technology, specifications subject to change without notice.
DERATING
03/09/2012
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 5
DCQEB50 Series
50W, Single Outputs
Quarter-Brick Package
DC/DC Power Converters
Rev B
CHARACTERISTICS
Recommended Filter for EN55022 Class B Compliance
DCQEB50-24Sxx
C1
N/A
C6
1.5nF/3KV
C11
0.1µF/50V
L1
620µH
C2
N/A
C7
6.8µF/50V
C12
1.0nF/3KV
L2
620µH
C3
6.8µF/50V
C8
6.8µF/50V
C13
1.0nF/3KV
C4
6.8µF/50V
C9
6.8µF/50V
C14
1.0nF/3KV
C5
1.5nF/3KV
C10
0.1µF/50V
C15
1.0nF/3KV
DCQEB50-48Sxx
C1
100µF/100V
C6
1.5nF/3KV
C11
0.1µF/50V
L1
620µH
C2
1.5µF/100V
C7
47µF/100V
C12
1.0nF/3KV
L2
620µH
C3
1.5µF/100V
C8
1.5µF/100V
C13
1.0nF/3KV
C4
1.5µF/100V
C9
1.5µF/100V
C14
1.0nF/3KV
C5
1.5nF/3KV
C10
0.1µF/50V
C15
1.0nF/3KV
Recommended EN55022 Class B Filter Circuit Layout
DCQEB
SERIES
03/09/2012
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 4 of 5
Rev B
DCQEB50 Series
50W, Single Outputs
Quarter-Brick Package
DC/DC Power Converters
MECHANICAL DRAWING
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
03/09/2012
(603)778-2300
(888)587-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 5 of 5
Similar pages