ON ESD5101FCT5G Esd protection diode Datasheet

ESD5101, ESD5111
ESD Protection Diodes
Micro−packaged Diodes for ESD
Protection
The ESD51x1 Series is designed to protect voltage sensitive
components from ESD. Excellent clamping capability, low leakage,
and fast response time provide best in class protection on designs that
are exposed to ESD. Because of its small size, it is suited for use in
smartphone, smart-watch, or many other portable / wearable
applications where board space comes at a premium.
www.onsemi.com
MARKING
DIAGRAMS
ESD5101 (01005)
DSN2
CASE 152AK
L
ESD5101P (01005)
DSN2
CASE TBD*
X
ESD5111 (0201)
WLCSP2
CASE 567AV
EM
ESD5111P (0201)
WLCSP2
CASE TBD*
XM
Features
• Low Capacitance (5 pF Max, I/O to GND)
• Small Body Outline Dimensions
♦
•
•
•
01005 Size: 0.435 x 0.23 mm
♦ 0201 Size: 0.6 x 0.3 mm
Protection for the Following IEC Standards:
IEC 61000−4−2 (Level 4)
Low ESD Clamping Voltage
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range
TJ
−55 to +125
°C
Storage Temperature Range
Tstg
−55 to +150
°C
Lead Solder Temperature −
Maximum (10 Seconds)
TL
260
°C
ESD
ESD
±15
±15
kV
kV
IEC 61000−4−2 Contact (ESD)
IEC 61000−4−2 Air (ESD)
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
L, E, X = Device Code
M = Date Code
* In Development
PIN CONFIGURATION
AND SCHEMATIC
1
2
See Application Note AND8308/D for further description of
survivability specs.
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
=
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2015
August, 2015 − Rev. 2
1
Publication Order Number:
ESD5101/D
ESD5101, ESD5111
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
Parameter
Reverse Working Voltage
Symbol
VRWM
Breakdown Voltage
VBR
Conditions
Min
Typ
I/O Pin to GND
IT = 1 mA, I/O Pin to GND
3.68
5.0
Reverse Leakage Current
IR
VRWM = 3.3 V, I/O Pin to GND
ESD5101, ESD5111
Clamping Voltage
TLP (Note 1)
VC
IPP = 8 A
IEC 61000−4−2 Level 2 equivalent
(±4 kV Contact, ±4 kV Air)
5.5
IPP = 16 A
IEC 61000−4−2 Level 2 equivalent
(±8 kV Contact, ±15 kV Air)
6.5
Junction Capacitance
CJ
VR = 0 V, f = 1 MHz
Max
Unit
3.3
V
6.5
V
0.1
mA
V
5.5
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. ANSI/ESD STM5.5.1 − Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model.
TLP conditions: Z0 = 50 W, tp = 100 ns, tr = 4 ns, averaging window; t1 = 30 ns to t2 = 60 ns.
ORDERING INFORMATION
Package
Shipping†
ESD5101FCT5G
DSN2 (Pb−Free)
10,000 / Tape & Reel
ESD5111FCT5G
WLCSP2 (Pb−Free)
10,000 / Tape & Reel
ESD5101PFCT5G**
Side wall Isolated 01005
10,000 / Tape & Reel
ESD5111PFCT5G**
Side wall Isolated 0201
10,000 / Tape & Reel
Device
** In Development. Contact local sales rep for availability.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2
ESD5101, ESD5111
10
9
9
8
8
7
7
6
6
C (pF)
10
5
4
3
3
2
2
1
0
−3.5
1
0
−3.5
−2.5
−1.5
−0.5
0.5
1.5
2.5
3.5
−2.5
−1.5
−0.5
0.5
1.5
2.5
VBIAS (V)
VBIAS (V)
Figure 1. ESD5101 CV Characteristics
Figure 2. ESD5111 CV Characteristics
2
2
0
0
−2
−2
−4
3.5
−4
−6
−6
−8
−8
−10
−10
1.E+08
1.E+07
1.E+07
1.E+09
1.E+09
FREQUENCY (Hz)
Figure 3. ESD5101 S21 Insertion Loss
Figure 4. ESD5111 S21 Insertion Loss
10
10
9
9
8
8
7
6
5
4
3
7
6
5
4
3
2
2
1
0
1
0
0.5
1.E+08
FREQUENCY (Hz)
CAPACITANCE (pF)
CAPACITANCE (pF)
5
4
(dB)
(dB)
C (pF)
TYPICAL CHARACTERISTICS
1.0
1.5
2.0
3.0
2.5
0.5
1.0
1.5
2.0
2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 5. ESD5101 Capacitance over
Frequency
Figure 6. ESD5111 Capacitance over
Frequency
www.onsemi.com
3
3.0
ESD5101, ESD5111
TYPICAL CHARACTERISTICS
20
20
10
18
16
12
TLP CURRENT (A)
14
6
10
8
4
6
12
8
4
2
0
0
2
0
4
6
8
10
12
14
16
18
4
6
2
2
6
10
4
0
8
14
2
0
0
20
2
4
6
VC, VOLTAGE (V)
8
10
12
14
16
18
20
VC, VOLTAGE (V)
Figure 7. ESD5101 Positive TLP I−V Curve
Figure 8. ESD5111 Positive TLP I−V Curve
−20
10
−20
10
−18
−18
−12
6
−10
−8
4
−6
−4
−2
0
0
2
4
6
8
10
12
14
16
18
TLP CURRENT (A)
−14
−16
−14
−12
6
−10
−8
4
−6
2
−4
0
−2
0
20
8
VIEC, EQUIVALENT (kV)
8
VIEC, EQUIVALENT (kV)
−16
TLP CURRENT (A)
VIEC, EQUIVALENT (kV)
8
VIEC, EQUIVALENT (kV)
16
TLP CURRENT (A)
10
18
2
0
VC, VOLTAGE (V)
2
4
6
8
10
12
14
16
18
0
20
VC, VOLTAGE (V)
Figure 9. ESD5101 Negative TLP I−V Curve
Figure 10. ESD5111 Negative TLP I−V Curve
Figure 11. ESD5111 Positive 8 kV ESD Contact
Discharge
Figure 12. ESD5111 Negative 8 kV ESD
Contact Discharge
www.onsemi.com
4
ESD5101, ESD5111
IEC61000−4−2 Waveform
IEC 61000−4−2 Spec.
Ipeak
Level
Test Voltage (kV)
First Peak
Current
(A)
Current at
30 ns (A)
Current at
60 ns (A)
1
2
7.5
4
2
2
4
15
8
4
3
6
22.5
12
6
4
8
30
16
8
100%
90%
I @ 30 ns
I @ 60 ns
10%
tP = 0.7 ns to 1 ns
Figure 13. IEC61000−4−2 Spec
Transmission Line Pulse (TLP) Measurement
L
Transmission Line Pulse (TLP) provides current versus
voltage (I−V) curves in which each data point is obtained
from a 100 ns long rectangular pulse from a charged
transmission line. A simplified schematic of a typical TLP
system is shown in Figure 14. TLP I−V curves of ESD
protection devices accurately demonstrate the product’s
ESD capability because the 10s of amps current levels and
under 100 ns time scale match those of an ESD event. This
is illustrated in Figure 15 where an 8 kV IEC 61000−4−2
current waveform is compared with TLP current pulses at
8 A and 16 A. A TLP I−V curve shows the voltage at which
the device turns on as well as how well the device clamps
voltage over a range of current levels.
50 W Coax
Cable
S Attenuator
÷
50 W Coax
Cable
10 MW
IM
VM
DUT
VC
Oscilloscope
Figure 14. Simplified Schematic of a Typical TLP
System
Figure 15. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms
www.onsemi.com
5
ESD5101, ESD5111
PACKAGE DIMENSIONS − ESD5111 (0201)
WLCSP2, 0.6x0.3
CASE 567AV
ISSUE A
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
A B
0.02 C
2X
DIM
A
A1
b
D
E
e
L
E
0.02 C
2X
TOP VIEW
0.02 C
A
0.02 C
A1
C
SIDE VIEW
MILLIMETERS
MIN
MAX
0.25
0.30
0.00
0.05
0.14
0.17
0.60 BSC
0.30 BSC
0.36 BSC
0.19
0.24
RECOMMENDED
SOLDER FOOTPRINT*
SEATING
PLANE
2X
0.33
e
2X
L
2X b
0.05 C A B
2X
0.28
0.81
BOTTOM VIEW
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
PACKAGE DIMENSIONS − ESD5101 (01005)
DSN2, 0.435x0.23, 0.27P, (01005)
CASE 152AK
ISSUE A
D
PIN 1
INDICATOR
0.02 C
2X
2X
ÉÉ
ÉÉ
ÉÉ
0.02 C
MILLIMETERS
DIM MIN
MAX
A 0.165 0.195
A1
−−− 0.030
b 0.177 0.193
D
0.435 BSC
E
0.230 BSC
e
0.270 BSC
L 0.112 0.128
E
TOP VIEW
A
0.05 C
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
A
B
A1
0.02 C
2X
C
SIDE VIEW
RECOMMENDED
SOLDER FOOTPRINT*
SEATING
PLANE
0.44
e
2X
0.05
b
M
2X
C A B
0.23
1
1
L
C A B
2X
0.05
M
0.16
DIMENSIONS: MILLIMETERS
2X
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
BOTTOM VIEW
www.onsemi.com
6
ESD5101, ESD5111
PACKAGE DIMENSIONS − ESD5101P (01005)
www.onsemi.com
7
ESD5101, ESD5111
PACKAGE DIMENSIONS − ESD5111P (0201)
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
8
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
ESD5101/D
Similar pages