Spec Sheet PrintPDF FBAR/SAW Devices (SAW Duplexers) D6DA2G140K2A7 Features Item Summary SAW, Duplexer, 1.8x1.4x0.5mm Band 1 / BC 6 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions W-CDMA / CDMA / LTE Dimension L 1.8 + 0/- 0.20 mm Type SAW Dimension W 1.4 + 0/- 0.20 mm Function Duplexer Dimension T Max 0.5 mm band Band 1 / BC 6 Insertion Loss (typ) 1.6/1.7 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 58/59 dB Operating Temp. Range -20 to +85 ℃ RoHS2 Compliance (10 subst.) Yes REACH Compliance (168 subst.) Yes Soldering Reflow 2016.11.21 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Table 1. Tx to ANT (MHz) Typ Max 1.6 2.2 dB (*1) Ripple 1920.48~1979.52 - 0.7 1.4 dB - 1.6 2.1 - - 1.4 2.0 - VSWR Tx 1920.48~1979.52 29dBm, Ta+50deg.C, 1920.48~1979.52 Remarks - 10000h,CW 1559~1563 37 41 - dB 1565~1606 37 40 - dB 1805~1880 10 25 - dB 2110~2170 44 58 - dB 2400~2500 33 38 - dB 3840~3960 25 34 - dB Insertion loss 2110.48~2169.52 - 1.7 2.2 dB (*1) Ripple 2110.48~2169.52 - 0.6 1.4 dB - 1.6 2.0 - - 1.7 2.2 - 190 50 81 - dB Rx-Tx 1730~1790 40 46 - dB 2Tx -Rx 1920~1980 45 55 - dB 1980~2015 15 50 - dB 2015~2075 18 26 - dB 2400~2500 35 44 - dB 4030~4150 40 51 - dB Rx+Tx 5950~6130 33 41 - dB Rx+2Tx 1920.48~1979.52 54 58 - dB 2110.48~2169.52 55 59 - dB VSWR ANT Rx Absolute attenuation Tx to Min - Absolute attenuation Rx Unit 1920.48~1979.52 Input power to Specification Insertion loss ANT ANT Final Electrical Specification Condition Item Oct.15, 2015 Isolation Rx Terminating Impedance 2110.48~2169.52 Tx port 50 // 15nH Ω Rx port 50 Ω Ant port 50 // 2.7nH Ω -20 to +85 oC Operating Temperature Maximum DC in all ports DC impedance to ground Device size (L typ.x W typ.x H max.) - - 3 (Rx+Tx)/2 VDC Device only 100 MΩ Device only 1.8 x 1.4 x 0.5 mm (*1) Specification of insertion loss excludes loss that comes from the test board Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Oct.15, 2015 Final Dimensions 0.5max. max <7> <6> <5> <8> index <1> <5> <4> <2> <6> <7> <4> <3> <3> < Top View > < Side View > <8> <2> <1> < Bottom View > Unit: mm Pin assignment Pin No. Pin name Description 1 Rx Receiver 2 GND Ground 3 Tx Transmitter 4 GND Ground 5 GND Ground 6 ANT Antenna 7 GND Ground 8 GND Ground Figure 1. Dimensions and Pin assignment Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Oct.15, 2015 Final Evaluation Circuit ANT (50Ω) L=2.7 nH (Q=∞) 6 RX (50Ω) 1 3 2,4,5,7,8 TX (50Ω) L=15 nH (Q=∞) GND 1~8:pin No. Recommended foot print pattern Common GND External appearance in Chip carrier :Pad pattern :Resist pattern Figure 2. Recommended foot print pattern Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Tx to Ant Ant to Rx Figure 3-1. Electrical Characteristics These data exclude loss that comes from the test board. Oct.15, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Tx to Ant, Ant to Rx Tx to Rx Isolation Figure 3-2. Electrical Characteristics These data exclude loss that comes from the test board. Oct.15, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Tx Port Figure 3-3. Electrical Characteristics Oct.15, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Rx Port Figure 3-4. Electrical Characteristics Oct.15, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Ant Port Figure 3-5. Electrical Characteristics Oct.15, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Tx to Ant (Wide span) Ant to Rx (Wide span) Figure 3-6. Electrical Characteristics Oct.15, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 1 Duplexer Date Part Number D6DA2G140K2A7 Ver.1.1ghE Oct.15, 2015 Final Ordering Code Ordering Code Packing Reel size Status D6DA2G140K2A7-Z Tape & Reel 3,000 pcs. MP D6DA2G140K2A7-ZA Tape & Reel less than 3,000 pcs. MP D6DA2G140K2A7-Y Tape & Reel 15,000 pcs. MP D6DA2G140K2A7-YA Tape & Reel less than 15,000 pcs. MP D6DA2G140K2A7-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives.. *MP : Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact Taiyo Yuden in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.