Wall DCMA01-15S033HI 1 watt dc/dc converter single and dual output Datasheet

DCMA01-HI SERIES
1 Watt
DC/DC Converter
Single and Dual Output
Rev A
FEATURES
• Wide Input Voltage Ranges
•
• Industrial Standard SIP-7 Package
•
• Common Mode Transient
Immunity: 15KV/µs
•
Qualifies for IGBT and High Isolation
Applications
Short Circuit Protection
UL/cUL/IEC/EN 60950-1 Safety Approvals
DESCRIPTION
Size: 0.77in x 0.40in x 0.28in (19.5mm x 10.2mm x 7.1mm)
The DCMA01-HI series of DC/DC converters offers 1 watt of output power in a
compact 0.77” x 0.40” x 0.28” industrial standard SIP-7 package. This series consists
of single and dual output models with wide input voltage ranges and high efficiency.
Each model in this series qualifies for IGBT and high isolation applications, has short
circuit protection, and has UL/cUL/IEC/EN 60950-1 safety approvals. This series is
RoHS & REACH compliant.
MODEL SELECTION TABLE
Single Output Models
Model Number
Input Voltage
Range
DCMA01-05S033HI
DCMA01-05S05HI
5VDC
DCMA01-05S09HI
(4.5~5.5VDC)
DCMA01-05S12HI
DCMA01-05S15HI
DCMA01-12S033HI
DCMA01-12S05HI
12VDC
DCMA01-12S09HI
(10.9~13.2VDC)
DCMA01-12S12HI
DCMA01-12S15HI
DCMA01-15S033HI
DCMA01-15S05HI
15VDC
DCMA01-15S09HI
(13.5~16.5VDC)
DCMA01-15S12HI
DCMA01-15S15HI
DCMA01-24S033HI
DCMA01-24S05HI
24VDC
DCMA01-24S09HI
(21.6~26.4VDC)
DCMA01-24S12HI
DCMA01-24S15HI
Output
Voltage
3.3VDC
5VDC
9VDC
12VDC
15VDC
3.3VDC
5VDC
9VDC
12VDC
15VDC
3.3VDC
5VDC
9VDC
12VDC
15VDC
3.3VDC
5VDC
9VDC
12VDC
15VDC
Output Current
Min Load
Max Load
6mA
303mA
4mA
200mA
2mA
111mA
1.7mA
84mA
1.3mA
66mA
6mA
303mA
4mA
200mA
2mA
111mA
1.7mA
84mA
1.3mA
66mA
6mA
303mA
4mA
200mA
2mA
111mA
1.7mA
84mA
1.3mA
66mA
6mA
303mA
4mA
200mA
2mA
111mA
1.7mA
84mA
1.3mA
66mA
Input Current
No Load Max Load
286mA
286mA
35mA
266mA
261mA
254mA
117mA
117mA
17mA
110mA
108mA
104mA
95mA
95mA
16mA
89mA
90mA
84mA
60mA
60mA
12mA
56mA
53mA
52mA
Load
Regulation
20%
15%
10%
10%
10%
20%
15%
10%
10%
10%
20%
15%
10%
10%
10%
20%
15%
10%
10%
10%
Maximum
Capacitive Load
1000µF
470µF
470µF
220µF
220µF
1000µF
470µF
470µF
220µF
220µF
1000µF
470µF
470µF
220µF
220µF
1000µF
470µF
470µF
220µF
220µF
Efficiency
70%
70%
75%
77%
78%
71%
71%
76%
78%
79%
70%
70%
75%
75%
79%
70%
70%
75%
78%
80%
Output
Power
1W
1W
1W
1W
MODEL SELECTION TABLE
Dual Output Models
Output
Voltage
DCMA01-05D05HI
±5VDC
DCMA01-05D09HI
±9VDC
5VDC
DCMA01-05D12HI
±12VDC
(4.5~5.5VDC)
DCMA01-05D15HI
±15VDC
DCMA01-05D159HI
15, -9VDC
DCMA01-12D05HI
±5VDC
DCMA01-12D09HI
±9VDC
12VDC
DCMA01-12D12HI
±12VDC
(10.9~13.2VDC)
DCMA01-12D15HI
±15VDC
DCMA01-12D159HI
15, -9VDC
DCMA01-15D05HI
±5VDC
DCMA01-15D09HI
±9VDC
15VDC
DCMA01-15D12HI
±12VDC
(13.5~16.5VDC)
DCMA01-15D15HI
±15VDC
DCMA01-15D159HI
15, -9VDC
DCMA01-24D05HI
±5VDC
DCMA01-24D09HI
±9VDC
24VDC
DCMA01-24D12HI
±12VDC
(21.6~26.4VDC)
DCMA01-24D15HI
±15VDC
DCMA01-24159HI
15, -9VDC
Model Number
10/14/2016
Input Voltage
Range
Output Current
Input Current
Load
Maximum
Output
(1) Efficiency
Power
Min Load
Max Load No Load Max Load Regulation Capacitive Load
±2mA
±100mA
282mA
15%
220#µF
71%
±1.1mA
±56mA
269mA
10%
220#µF
75%
±0.8mA
±42mA
35mA
262mA
10%
100#µF
77%
1W
±0.7mA
±33mA
254mA
10%
100#µF
78%
+0.7, -1.1mA +33, -55mA
260mA
10%
100, 220µF
76%
±2mA
±100mA
116mA
15%
220#µF
72%
±1.1mA
±56mA
111mA
10%
220#µF
76%
±0.8mA
±42mA
17mA
108mA
10%
100#µF
78%
1W
±0.7mA
±33mA
104mA
10%
100#µF
79%
+0.7, -1.1mA +33, -55mA
107mA
10%
100, 220µF
77%
±2mA
±100mA
94mA
15%
220#µF
71%
±1.1mA
±56mA
90mA
10%
220#µF
75%
±0.8mA
±42mA
16mA
86mA
10%
100#µF
78%
1W
±0.7mA
±33mA
84mA
10%
100#µF
79%
+0.7, -1.1mA +33, -55mA
87mA
10%
100, 220µF
76%
±2mA
±100mA
59mA
15%
220#µF
71%
±1.1mA
±56mA
56mA
10%
220#µF
75%
±0.8mA
±42mA
12mA
55mA
10%
100#µF
77%
1W
±0.7mA
±33mA
53mA
10%
100#µF
78%
+0.7, -1.1mA +33, -55mA
55mA
10%
100, 220µF
75%
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 5
DCMA01-HI SERIES
1 Watt
DC/DC Converter
Single and Dual Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, Resistive Load, and Rated Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
INPUT SPECIFICATIONS
Input Voltage Range
Input Surge Voltage (1 sec. max.)
Input Voltage Range
Max
Unit
±10
5V Input Models
12V Input Models
15V Input Models
24V Input Models
5V Input Models
12V Input Models
15V Input Models
24V Input Models
All Models
-0.7
-0.7
-0.7
-0.7
4.5
10.8
13.5
21.6
Input Filter
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
For Vin Change of 1%
Load Regulation
Io=20% to 100%
Voltage Balance
Dual Output, Balanced Loads
Output Power
Output Current
Maximum Capacitive Load
Ripple & Noise
0-20MHz Bandwidth
Temperature Coefficient
PROTECTION
Short Circuit Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Natural Convection
Storage Temperature
Humidity
Non-Condensing
Case Temperature
Lead Temperature
1.5mm from Case for 10sec.
Cooling
MTBF (Calculated)
MIL-HDBK-217F@25ºC, Ground Benign
GENERAL SPECIFICATIONS
Typ. Efficiency
@Max. Load
Switching Frequency
Rated for 60 Seconds
Isolation Voltage
Tested for 1 Second
Isolation Resistance
500VDC
Isolation Capacitance
100KHz, 1V
Common Mode Transient Immunity
PHYSICAL SPECIFICATIONS
Weight
Dimensions (L x W x H)
Case Material
Pin Material
SAFETY CHARACTERISTICS
Safety Approvals
Typ
%
9
18
20
30
5
5.5
12
13.2
15
16.5
24
26.4
Internal Capacitor
VDC
VDC
See Table
±5.0
±1.2
See Table
±0.1
±1.0
See Table
See Table
See Table
100
±0.01
±0.02
%Vnom
%
%
Mvp-p
%/ºC
Continuous, Automatic Recovery
-40
-55
+85
+125
95
+100
260
Natural Convection
2,000,000 Hours
See Table
100
5200
5700
10
ºC
ºC
%RH
ºC
ºC
KHz
VDC
7
15
GΩ
pF
KVµs
0.085oz (2.4g)
0.77in x 0.40in x 0.28in
(19.5mm x 10.2mm x 7.1mm)
Non-Conductive Black Plastic
(Flammability to UL 94V-0 Rated)
Alloy 42
UL/cUL 60950-1 recognition (CSA Certificate), IEC/EN 60950-1 (CB Report)
NOTES
1.
2.
# for each output.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage
these modules; however they may not meet all specifications listed.
3. It is recommended to protect the converter by a slow blow fuse in the input supply line.
4. Other inputs and outputs may be available, please contact factory.
5. Natural convection is about 20LFM but is not equal to still air (0LFM).
*Due to advances in technology, specifications subject to change without notice.
10/14/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 5
DCMA01-HI SERIES
1 Watt
DC/DC Converter
Single and Dual Output
Rev A
DERATING CURVES
MECHANICAL DRAWINGS
Pin
1
2
5
6
7
Pin Connections
Single
Dual
+Vin
+Vin
-Vin
-Vin
-Vout
-Vout
No Pin
Common
+Vout
+Vout
All dimensions in mm (inches)
Tolerance: X.X±0.5 (X.XX±0.02)
X.XX±0.25 (X.XXX±0.01)
Pins ±0.05 (±0.002)
10/14/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 5
Rev A
DCMA01-HI SERIES
1 Watt
DC/DC Converter
Single and Dual Output
TEST SETUP
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.33µF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 020MHz. Position the load between 50mm and 75mm from the DC/DC Converter.
TERMINAL BLOCK OPTIONS
Maximum Capacitive Load
The DCMA01-HI series has limitation of maximum connected capacitance at the output. The power module may be operated in current
limiting mode during start-up, affecting the ramp-up and the startup time. The maximum can be found in the data sheet.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the
stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to
use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is
recommended to use a good quality low Equivalent Series Resistance (ESR <1.0Ω at 100KHz) capacitor of a 2.2µF for the 5V input
devices, a 1.0µF for the 12V, 15V input devices and a 0.4µF for the 24V devices.
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To
reduce output ripple, it is recommended to use 1.0µF capacitors at the output.
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing.
To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept
below 100ºC. The derating curves are determined from measurements obtained in a test setup.
10/14/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 5
Rev A
DCMA01-HI SERIES
1 Watt
DC/DC Converter
Single and Dual Output
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
10/14/2016
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 5
Similar pages