CHEMI-CON E91F451VND471MB50T High ripple snap mount capacitor Datasheet

CATALOG SM813
U91 / U92 Series
High Ripple Snap Mount Capacitors
Welcome to United Chemi-Con . . .
United Chemi-Con is introducing four new snap mount aluminum electrolytic capacitor series specifically designed for
higher ripple current capability. These new series include the U91F, U92F, U92L and U92X which also feature very long life,
wide temperature range, high voltage ratings and a variety of case sizes and terminal styles.
The U91F series is a high temperature series with a lifetime rating of 5,000 hours at 105C. The three U92 series offer a
lifetime rating of 5,000 hours for U92F, 10,000 hours for U92L or 15,000 hours for U92X at 85C. The rated lifetime for all
these series is measured with the rated ripple current applied.
All the U91/U92 series capacitors are RoHS compliant and are manufactured with or without an end disk in either a
standard Pb-free PVC sleeve or optional PET sleeve. There are two basic types of PC board terminals, snap-in or straight
standoffs. All of the new snap-in series offer 2, 3, 4 or 5 -pin layouts as either standard or optional configurations depending
on case size. Straight standoff terminals, 5 -pin configuration, are available as an option for the larger case diameters.
Please contact United Chemi-Con with any questions about these new snap mount capacitors. Custom designs are also
available upon request.
Specifications Guide for U91/U92 High Ripple Snap Mount Capacitors
Series
Page
No.
Terminal
Type
Features
RoHS
Compliant
Temperature
Range
(C)
Voltage
Range
(V)
Capacitance
Range
(µF )
Endurance
(Hrs.R*)
at 85C
at 105C
U91F
4
Snap
Mount
Specific High Ripple Design,
High Temperature, Long Life,
Pin Options
25C ~105C
350~500
120~2,700
—
5,000
U92F
11
Snap
Mount
Specific High Ripple Design,
Long Life, Pin Options
25C ~85C
350~500
180~3,300
5,000
—
U92L
18
Snap
Mount
Specific High Ripple Design,
Longer Life, Pin Options
25C ~85C
350~500
150~3,300
10,000
—
U92X
25
Snap
Mount
Specific High Ripple Design,
Longest Life, Pin Options
25C ~85C
350~500
150~3,300
15,000
—
*R = With rated ripple current applied.
In the construction of the components described, the full intent of the specification will be met. United Chemi-Con, however, reserves the right to make, from
time to time, such departures from the detail specifications as may be required to permit improvements in the design of its products. Components made under
military approvals will be in accordance with the approval requirements. The information included herein is believed to be accurate and reliable. However, United
Chemi-Con assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
3
Table of Contents
Table of Contents
Snap Mount
Specific Design
SNAP MOUNT 105C
U91F
U91F Series
For Higher Ripple
Current
350 to 500VDC
Voltage Range
RoHS Compliant
105C Maximum
Temperature
5,000 Hours
Lifetime at 105C
The U91F series is a high temperature snap-in series specifically designed for higher ripple current
capability. The U91F capacitors have an endurance rating of 5,000 hours at 105C with the rated
ripple current applied. All the U91F series capacitors are RoHS compliant and available in a variety
of sizes, with or without an end disk, and encased in a standard Pb-free PVC sleeve or an optional
PET sleeve. Snap-in terminals (2, 4 or 5 -pin configurations) are available as standard or optional
styles depending on case size. Straight standoff terminals (5 -pin configuration) are an option for the
40, 45 and 50mm can diameters.
Summary of Specifications
PC board snap-in or straight standoff terminals available as standard or optional
styles depending on pin styles and case size.
Capacitance range: 120 to 2,700µF.
Voltage range: 350 to 500VDC.
Category temperature range: 25C to 105C.
Leakage current: 3 CV (µA) or 3mA, whichever is smaller, after 5 minutes at 20C.
Standard capacitance tolerance: 20%
Nominal case size (DL): 3040mm to 50105mm.
Rated lifetime: 5,000 hours at 105C with the rated ripple current applied.
4
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U91F Series
U91F Specifications - Snap Mount
Item
Characteristics
Category Temperature Range
25 to 105C
Rated Voltage Range
350 to 500VDC
Capacitance Range
120 to 2,700F
Capacitance Tolerance
20% ( M ) at 20C, 120Hz
Leakage Current
I = 3 CV (A ) or 3mA, whichever is smaller, after 5 minutes at 20C.
Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V )
At 20C, 120Hz
Rated Voltage ( V )
350 - 400
420 -500
0.15
0.20
Tan ( DF ) Max.
At 120Hz, impedance ( Z ) ratio between the 25C value and 20C value shall not exceed
the values given below.
Rated Voltage ( V )
350 -500
Z (25C ) / Z (20C )
Rated Ripple Current Multipliers
8
Ambient Temperature (C )
65C
85C
105C
2.82
1.73
1.00
Frequency (Hz )
Endurance
(Load Life)
DC Rated Voltage
50Hz
120Hz
300Hz
1kHz
10kHz
100kHz
350 - 450V
0.77
1.00
1.16
1.30
1.41
1.43
500V
0.70
1.00
1.16
1.30
1.41
1.43
The following specifications shall be satisfied when the capacitors are restored to 20C after
subjecting them to DC voltage for 5,000 hours at 105C with the rated ripple current applied.
The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of
the capacitors.
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 200% of initial specified value
Leakage current
: ≤ initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after
exposing them for 1,000 hours at 105C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 150% of initial specified value
Leakage current
: ≤ initial specified value
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
5
U91F
Low Temperature
Characteristics
SNAP MOUNT 105C
Dissipation Factor ( Tan )
Engineering Bulletin Aug 2013
U91F Series
Diagram of Dimensions - Snap Mount
Unit: mm
Snap Mount
VND Snap-in Ø 35 and Ø 40 standard; Ø 45 optional
VSD Snap-in Ø 35 and Ø 40 optional
VSN Snap-in Ø 30 and Ø 35 standard
VNN Snap-in Ø 30 and Ø 35 optional
*** Brown Insulating Sleeve
Negative Mark
PC Board Pin-out
*** Brown Insulating Sleeve
Negative Mark
PC Board Pin-out
A*
U91F
SNAP MOUNT 105C
D 1
** Vent
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
** Vent
Negative Mark
PC Board Pin-out
3.3 0.1
4.75 0.1
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
L
C*
See
Pin
Detail
2.5
2-4x
VNT Snap-in Ø 45 and Ø 50 standard
D 1
** Vent
22.5
B
Insulating Disk
VEN Snap-in Ø 30 and Ø 35 optional
*** Brown Insulating Sleeve
D 1
30°
*** Brown Insulating Sleeve
Negative Mark
A
B*
C
PC Board Pin-out
360°
6
D 1
** Vent
25
L
2.5 MIN.-1x
Insulating Disk
2-5x
D
See
Pin
Detail
2.5
VS, VE & VN Snap-in Pin Dimensions
W2
W1
P
Straight Pin Mount
Edge
of can
VQT Straight Standoff Ø 40, Ø 45 and Ø 50 optional
W
*** Brown Insulating Sleeve
Type
VSN Ø 30
VSN Ø 35
VNN Ø 30 - Ø 35
VEN Ø 30 - Ø 35
VSD Ø 35 - Ø 40
VND Ø 35 - Ø 45
VNT Ø 45 - Ø 50
P
4.00.5
3.50.5
5.81.0
4.00.5
3.51.0
5.81.0
5.81.0
W
W1
Negative Mark
W2
PC Board Pin-out
360°
6
B*
A*
C
D 1
1.50.2
0.80.1
0.80.1
** Vent
25
L
D*
See
Pin
Detail
2.5
Insulating Disk
2- 5x
VQ Standoff Pin Dimensions
W1
W
P
CAUTION:
* Use the blank terminals for mechanical support only. The
blank terminals must not be connected to a solder trace on
the PC board but be electrically isolated from the negative
and positive terminals.
** The vent may be located either on the bottom or side of
the can.
*** The brown sleeve with gray stripe negative pin indicator
is standard. Also note in some cases, the sleeve color may
change slightly due to the operating conditions, however,
the discoloration will not impair capacitor function.
Edge
of can
P1
Type
Standoff Pin (VQ)
P
3.751.0
P1
2.0 max.
W
1.50.1
W1
0.70.2
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
6
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U91F Series
Part Numbering System for U91F Series
When ordering, always specify complete 18-field global part number.
18 Fields
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
E 9 1 F 4 0 1 V S N 4 7 1 M A 5 0 T
9
6
5
4
3
2
1
Capacitance. Fields 11, 12 and 13.
Expressed in Microfarads. The first two digits are significant
figures inserted in fields 11 and 12, and the third digit inserted
in field 13 indicates the number of zeros for capacitance of
10F or more. R indicates the decimal point for capacitance
less than 10F (e.g. 4R7 = 4.7F; 470 = 47F; 471 = 470F;
472 = 4,700F; 473 = 47,000F ).
Dummy Terminals. Field 10.
N = No dummy terminals.
D = 2 dummy terminals.
T = 3 dummy terminals.
Terminal Type. Fields 8 and 9.
VS = Snap-in pins, 4.0mm in length ( Ø30 VSN);
3.5mm in length ( Ø35 VSN, Ø35 or Ø40 VSD).
VN = Snap-in pins, 5.8mm in length.
VE = Snap-in pins, polarized, Ø30 or Ø35 option.
VQ = Straight standoff pins.
DC Rated Voltage. Fields 5, 6 and 7.
Expressed in Volts. The first two digits are significant figures
inserted in fields 5 and 6, and the third digit inserted in field 7
indicates the number of zeros for rated voltage of 10VDC or
more. R indicates the decimal point for rated voltage less than
10VDC (e.g. 4R0 = 4.0VDC; 400 = 40VDC; 401 = 400VDC).
Rule Exception: Coding for rated voltage 385VDC = 3J1.
Series Name. Fields 2, 3 and 4.
Enter the 3-letter/digit series name in fields 2, 3 and 4. If the
series name is only 2 letters/digits, place a dash in field 4.
For a series name with more than 3 letters/digits, refer to the
individual series for the appropriate 3-field series name.
Capacitor Type. Field 1.
Aluminum Electrolytic Capacitor (Polar).
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
7
U91F
7
SNAP MOUNT 105C
8
Supplement Code. Field 18.
All construction options listed have Sn100% terminal plating.
T = Pb-free PVC sleeve with end disk.
M = Pb-free PVC sleeve without end disk.
W = PET sleeve with end disk.
S = PET sleeve without end disk.
Case Size. Fields 15, 16 and 17.
The single letter diameter code is inserted in field 15.
R = Ø 30mm
A = Ø 35mm
B = Ø 40mm
U = Ø 45mm
C = Ø 50mm
The double digit length code is inserted in fields 16 and 17.
40 = 40mm
50 = 50mm
65 = 65mm
80 = 80mm
A0 = 100mm
A5 = 105mm
Capacitance Tolerance. Field 14.
M = 20%
Engineering Bulletin Aug 2013
U91F Series
Standard Voltage Ratings - Snap Mount
U91F
SNAP MOUNT 105C
Rated
Voltage
(WVDC)
350 Volts
400 Volts Surge
385 Volts
435 Volts Surge
400 Volts
450 Volts Surge
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
Rated
Ripple Current
(A rms) at
105C, 120Hz
270
390
560
390
560
820
1,000
1,200
820
1,200
1,500
1,800
820
1,200
1,800
2,200
1,200
1,800
2,200
2,700
E91F351VSN271MR40T
E91F351VSN391MR50T
E91F351VSN561MR65T
E91F351VSN391MA40T
E91F351VSN561MA50T
E91F351VND821MA65T
E91F351VND102MA80T
E91F351VND122MAA0T
E91F351VND821MB50T
E91F351VND122MB65T
E91F351VND152MB80T
E91F351VND182MBA0T
E91F351VNT821MU50T
E91F351VNT122MU65T
E91F351VNT182MU80T
E91F351VNT222MUA5T
E91F351VNT122MC50T
E91F351VNT182MC65T
E91F351VNT222MC80T
E91F351VNT272MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.324
0.225
0.156
0.235
0.164
0.112
0.092
0.076
0.121
0.083
0.066
0.055
0.131
0.090
0.060
0.049
0.092
0.066
0.054
0.044
1.5
2.0
2.6
2.0
2.7
3.5
4.1
5.0
3.3
4.3
5.1
6.1
3.3
4.4
5.8
7.1
4.1
5.2
6.3
7.9
220
330
470
330
470
680
1,000
1,200
680
1,000
1,200
1,500
820
1,200
1,500
1,800
1,000
1,500
1,800
2,700
E91F3J1VSN221MR40T
E91F3J1VSN331MR50T
E91F3J1VSN471MR65T
E91F3J1VSN331MA40T
E91F3J1VSN471MA50T
E91F3J1VND681MA65T
E91F3J1VND102MA80T
E91F3J1VND122MAA0T
E91F3J1VND681MB50T
E91F3J1VND102MB65T
E91F3J1VND122MB80T
E91F3J1VND152MBA0T
E91F3J1VNT821MU50T
E91F3J1VNT122MU65T
E91F3J1VNT152MU80T
E91F3J1VNT182MUA5T
E91F3J1VNT102MC50T
E91F3J1VNT152MC65T
E91F3J1VNT182MC80T
E91F3J1VNT272MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.336
0.245
0.174
0.237
0.173
0.123
0.095
0.073
0.135
0.096
0.075
0.058
0.118
0.084
0.065
0.047
0.094
0.073
0.056
0.041
1.5
1.9
2.5
2.0
2.6
3.3
4.0
5.1
3.1
4.0
4.8
6.0
3.5
4.5
5.5
7.2
4.1
5.0
6.2
8.2
220
330
390
330
470
680
820
1,000
560
820
1,200
1,500
680
1,000
E91F401VSN221MR40T
E91F401VSN331MR50T
E91F401VSN391MR65T
E91F401VSN331MA40T
E91F401VSN471MA50T
E91F401VND681MA65T
E91F401VND821MA80T
E91F401VND102MAA0T
E91F401VND561MB50T
E91F401VND821MB65T
E91F401VND122MB80T
E91F401VND152MBA0T
E91F401VNT681MU50T
E91F401VNT102MU65T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
0.380
0.253
0.214
0.265
0.186
0.129
0.107
0.088
0.164
0.112
0.076
0.061
0.146
0.100
1.4
1.8
2.2
1.9
2.5
3.2
3.8
4.7
2.8
3.7
4.8
5.8
3.1
4.1
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
8
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U91F Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
400 Volts
450 Volts Surge
500 Volts
550 Volts Surge
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
Rated
Ripple Current
(A rms) at
105C, 120Hz
1,200
1,800
1,000
1,200
1,800
2,200
E91F401VNT122MU80T
E91F401VNT182MUA5T
E91F401VNT102MC50T
E91F401VNT122MC65T
E91F401VNT182MC80T
E91F401VNT222MCA5T
45 80
45 105
50 50
50 65
50 80
50 105
U80
UA5
C50
C65
C80
CA5
0.083
0.055
0.101
0.093
0.062
0.051
4.9
6.7
3.9
4.4
5.9
7.4
180
270
390
270
390
560
680
820
560
820
1,000
1,200
680
1,000
1,200
1,700
820
1,200
1,500
2,200
E91F421VSN181MR40T
E91F421VSN271MR50T
E91F421VSN391MR65T
E91F421VSN2711MA40T
E91F421VSN391MA50T
E91F421VND561MA65T
E91F421VND681MA80T
E91F421VND821MAA0T
E91F421VND561MB50T
E91F421VND821MB65T
E91F421VND102MB80T
E91F421VND122MBA0T
E91F421VNT681MU50T
E91F421VNT102MU65T
E91F421VNT122MU80T
E91F421VNT172MUA5T
E91F421VNT821MC50T
E91F421VNT122MC65T
E91F421VNT152MC80T
E91F421VNT222MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.442
0.295
0.204
0.310
0.214
0.149
0.123
0.102
0.156
0.107
0.088
0.073
0.141
0.096
0.080
0.056
0.126
0.086
0.069
0.047
1.3
1.7
2.3
1.8
2.3
3.0
3.5
4.3
2.9
3.8
4.5
5.3
3.2
4.2
5.0
6.6
3.5
4.6
5.6
7.7
180
220
330
270
390
470
680
820
470
680
820
1,200
680
820
1,000
1,500
820
1,000
1,500
1,800
E91F451VSN181MR40T
E91F451VSN221MR50T
E91F451VSN331MR65T
E91F451VSN271MA40T
E91F451VSN391MA50T
E91F451VND471MA65T
E91F451VND681MA80T
E91F451VND821MAA0T
E91F451VND471MB50T
E91F451VND681MB65T
E91F451VND821MB80T
E91F451VND122MBA0T
E91F451VNT681MU50T
E91F451VNT821MU65T
E91F451VNT102MU80T
E91F451VNT152MUA5T
E91F451VNT821MC50T
E91F451VNT102MC65T
E91F451VNT152MC80T
E91F451VNT182MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.442
0.362
0.241
0.310
0.214
0.178
0.123
0.102
0.178
0.123
0.102
0.070
0.135
0.112
0.092
0.061
0.121
0.100
0.066
0.055
1.3
1.5
2.1
1.8
2.3
2.8
3.5
4.3
2.7
3.5
4.1
5.5
3.3
3.9
4.7
6.4
3.6
4.3
5.7
7.1
120
180
270
180
270
390
E91F501VSN121MR40T
E91F501VSN181MR50T
E91F501VSN271MR65T
E91F501VSN181MA40T
E91F501VSN271MA50T
E91F501VND391MA65T
30 40
30 50
30 65
35 40
35 50
35 65
R40
R50
R65
A40
A50
A65
0.663
0.442
0.295
0.442
0.295
0.204
1.0
1.4
1.9
1.5
2.0
2.6
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
9
U91F
450 Volts
500 Volts Surge
Global
Part Number†
SNAP MOUNT 105C
420 Volts
470 Volts Surge
Capacitance
(µF )
Engineering Bulletin Aug 2013
U91F Series
Standard Voltage Ratings - Snap Mount
U91F
SNAP MOUNT 105C
Rated
Voltage
(WVDC)
500 Volts
550 Volts Surge
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
Rated
Ripple Current
(A rms) at
105C, 120Hz
470
560
330
470
680
820
390
560
820
1,000
560
820
1,000
1,200
E91F501VND471MA80T
E91F501VND561MAA0T
E91F501VND331MB50T
E91F501VND471MB65T
E91F501VND681MB80T
E91F501VND821MBA0T
E91F501VNT391MU50T
E91F501VNT561MU65T
E91F501VNT821MU80T
E91F501VNT102MUA5T
E91F501VNT561MC50T
E91F501VNT821MC65T
E91F501VNT102MC80T
E91F501VNT122MCA5T
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.169
0.142
0.253
0.178
0.123
0.102
0.225
0.156
0.107
0.088
0.164
0.112
0.092
0.076
3.0
3.7
2.3
2.9
3.8
4.5
2.5
3.3
4.3
5.3
3.1
4.0
4.9
6.0
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
10
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
U92F Series
Snap Mount
Specific Design
The U92F series is a specifically designed series for higher ripple current capability. The U92F
capacitors have an endurance rating of 5,000 hours at 85C with the rated ripple current applied.
All U92F series capacitors are RoHS compliant and available in a variety of sizes, with or without an
end disk, and encased in a PET sleeve or standard Pb-free PVC sleeve. Snap-in terminals (2, 4 or
5 -pin configurations) are available as standard or optional styles depending on case size. Straight
standoff terminals (5 -pin configuration) are an option for 40, 45 and 50mm can diameters.
Summary of Specifications
PC board snap-in or straight standoff terminals available as standard or optional
styles depending on pin styles and case size.
Capacitance range: 180 to 3,300µF.
Voltage range: 350 to 500VDC.
Category temperature range: 25C to 85C.
Leakage current: 3 CV (µA) or 3mA, whichever is smaller, after 5 minutes at 20C.
Standard capacitance tolerance: 20%
Nominal case size (DL): 3040mm to 50105mm.
Rated lifetime: 5,000 hours at 85C with the rated ripple current applied.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
11
U92F
SNAP MOUNT 85C
For Higher Ripple
Current
350 to 500VDC
Voltage Range
RoHS Compliant
85C Maximum
Temperature
5,000 Hours
Lifetime at 85C
Engineering Bulletin Aug 2013
U92F Series
U92F Specifications - Snap Mount
Item
Characteristics
Category Temperature Range
25 to 85C
Rated Voltage Range
350 to 500VDC
Capacitance Range
180 to 3,300F
Capacitance Tolerance
20% ( M ) at 20C, 120Hz
Leakage Current
I = 3 CV (A ) or 3mA, whichever is smaller, after 5 minutes at 20C.
Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V )
Dissipation Factor ( Tan )
At 20C, 120Hz
Rated Voltage ( V )
350 - 400
420 -500
0.15
0.20
Tan ( DF ) Max.
Low Temperature
Characteristics
At 120Hz, impedance ( Z ) ratio between the 25C value and 20C value shall not exceed
the values given below.
Rated Voltage ( V )
350 -500
Z (25C ) / Z (20C )
Rated Ripple Current Multipliers
8
Ambient Temperature (C )
45C
65C
85C
2.82
1.73
1.00
U92F
SNAP MOUNT 85C
Frequency (Hz )
Endurance
(Load Life)
DC Rated Voltage
50Hz
120Hz
300Hz
1kHz
10kHz
100kHz
350 - 450V
0.77
1.00
1.16
1.30
1.41
1.43
500V
0.70
1.00
1.16
1.30
1.41
1.43
The following specifications shall be satisfied when the capacitors are restored to 20C after
subjecting them to DC voltage for 5,000 hours at 85C with the rated ripple current applied.
The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of
the capacitors.
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 200% of initial specified value
Leakage current
: ≤ initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after
exposing them for 1,000 hours at 85C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 150% of initial specified value
Leakage current
: ≤ initial specified value
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
12
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92F Series
Diagram of Dimensions - Snap Mount
Unit: mm
Snap Mount
VND Snap-in Ø 35 and Ø 40 standard; Ø 45 optional
VSD Snap-in Ø 35 and Ø 40 optional
VSN Snap-in Ø 30 and Ø 35 standard
VNN Snap-in Ø 30 and Ø 35 optional
*** Black Insulating Sleeve
Negative Mark
PC Board Pin-out
*** Black Insulating Sleeve
Negative Mark
PC Board Pin-out
A*
D 1
** Vent
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
** Vent
Negative Mark
PC Board Pin-out
3.3 0.1
4.75 0.1
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
L
C*
See
Pin
Detail
2.5
2-4x
VNT Snap-in Ø 45 and Ø 50 standard
D 1
** Vent
22.5
B
Insulating Disk
VEN Snap-in Ø 30 and Ø 35 optional
*** Black Insulating Sleeve
D 1
30°
2.5 MIN.-1x
*** Black Insulating Sleeve
Negative Mark
A
B*
C
PC Board Pin-out
360°
6
D 1
** Vent
25
L
Insulating Disk
2-5x
D
See
Pin
Detail
2.5
W2
W1
P
Straight Pin Mount
Edge
of can
VQT Straight Standoff Ø 40, Ø 45 and Ø 50 optional
W
*** Black Insulating Sleeve
Type
VSN Ø 30
VSN Ø 35
VNN Ø 30 - Ø 35
VEN Ø 30 - Ø 35
VSD Ø 35 - Ø 40
VND Ø 35 - Ø 45
VNT Ø 45 - Ø 50
P
4.00.5
3.50.5
5.81.0
4.00.5
3.51.0
5.81.0
5.81.0
W
W1
Negative Mark
W2
PC Board Pin-out
360°
6
B*
A*
C
D 1
1.50.2
0.80.1
0.80.1
** Vent
25
L
D*
See
Pin
Detail
2.5
Insulating Disk
2- 5x
VQ Standoff Pin Dimensions
W1
W
P
CAUTION:
* Use the blank terminals for mechanical support only. The
blank terminals must not be connected to a solder trace on
the PC board but be electrically isolated from the negative
and positive terminals.
** The vent may be located either on the bottom or side of
the can.
*** The black sleeve with gray stripe negative pin indicator
is standard. Also note in some cases, the sleeve color may
change slightly due to the operating conditions, however,
the discoloration will not impair capacitor function.
Edge
of can
P1
Type
Standoff Pin (VQ)
P
3.751.0
P1
2.0 max.
W
1.50.1
W1
0.70.2
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
13
U92F
SNAP MOUNT 85C
VS, VE & VN Snap-in Pin Dimensions
Engineering Bulletin Aug 2013
U92F Series
Part Numbering System for U92F Series
When ordering, always specify complete 18-field global part number.
18 Fields
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
E 9 2 F 4 0 1 V S N 5 6 1 MR 6 5 T
9
8
7
U92F
SNAP MOUNT 85C
6
5
4
3
2
1
Supplement Code. Field 18.
All construction options listed have Sn100% terminal plating.
T = Pb-free PVC sleeve with end disk.
M = Pb-free PVC sleeve without end disk.
W = PET sleeve with end disk.
S = PET sleeve without end disk.
Case Size. Fields 15, 16 and 17.
The single letter diameter code is inserted in field 15.
R = Ø 30mm
A = Ø 35mm
B = Ø 40mm
U = Ø 45mm
C = Ø 50mm
The double digit length code is inserted in fields 16 and 17.
40 = 40mm
50 = 50mm
65 = 65mm
80 = 80mm
A0 = 100mm
A5 = 105mm
Capacitance Tolerance. Field 14.
M = 20%
Capacitance. Fields 11, 12 and 13.
Expressed in Microfarads. The first two digits are significant
figures inserted in fields 11 and 12, and the third digit inserted
in field 13 indicates the number of zeros for capacitance of
10F or more. R indicates the decimal point for capacitance
less than 10F (e.g. 5R6 = 5.6F; 560 = 56F; 561 = 560F;
562 = 5,600F; 563 = 56,000F ).
Dummy Terminals. Field 10.
N = No dummy terminals.
D = 2 dummy terminals.
T = 3 dummy terminals.
Terminal Type. Fields 8 and 9.
VS = Snap-in pins, 4.0mm in length ( Ø30 VSN);
3.5mm in length ( Ø35 VSN, Ø35 or Ø40 VSD).
VN = Snap-in pins, 5.8mm in length.
VE = Snap-in pins, polarized, Ø30 or Ø35 option.
VQ = Straight standoff pins.
DC Rated Voltage. Fields 5, 6 and 7.
Expressed in Volts. The first two digits are significant figures
inserted in fields 5 and 6, and the third digit inserted in field 7
indicates the number of zeros for rated voltage of 10VDC or
more. R indicates the decimal point for rated voltage less than
10VDC (e.g. 4R0 = 4.0VDC; 400 = 40VDC; 401 = 400VDC).
Rule Exception: Coding for rated voltage 385VDC = 3J1.
Series Name. Fields 2, 3 and 4.
Enter the 3-letter/digit series name in fields 2, 3 and 4. If the
series name is only 2 letters/digits, place a dash in field 4.
For a series name with more than 3 letters/digits, refer to the
individual series for the appropriate 3-field series name.
Capacitor Type. Field 1.
Aluminum Electrolytic Capacitor (Polar).
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
14
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92F Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
350 Volts
400 Volts Surge
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
330
470
680
560
680
1,000
1,200
1,800
820
1,200
1,500
2,200
1,200
1,500
2,200
2,700
1,500
2,200
2,700
3,300
E92F351VSN331MR40T
E92F351VSN471MR50T
E92F351VSN681MR65T
E92F351VSN561MA40T
E92F351VSN681MA50T
E92F351VND102MA65T
E92F351VND122MA80T
E92F351VND182MAA0T
E92F351VND821MB50T
E92F351VND122MB65T
E92F351VND152MB80T
E92F351VND222MBA0T
E92F351VNT122MU50T
E92F351VNT152MU65T
E92F351VNT222MU80T
E92F351VNT272MUA5T
E92F351VNT152MC50T
E92F351VNT222MC65T
E92F351VNT272MC80T
E92F351VNT332MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.338
0.237
0.164
0.192
0.158
0.107
0.090
0.060
0.126
0.086
0.069
0.047
0.093
0.074
0.051
0.041
0.082
0.056
0.046
0.037
2.0
2.6
3.5
3.2
3.8
5.0
5.9
8.0
4.5
5.9
7.1
9.4
5.6
6.8
8.9
10.9
6.2
8.1
9.8
12.2
330
390
560
470
560
820
1,200
1,500
820
1,200
1,500
1,800
1,000
1,500
1,800
2,200
1,200
1,800
2,200
3,300
E92F3J1VSN331MR40T
E92F3J1VSN391MR50T
E92F3J1VSN561MR65T
E92F3J1VSN471MA40T
E92F3J1VSN561MA50T
E92F3J1VND821MA65T
E92F3J1VND122MA80T
E92F3J1VND152MAA0T
E92F3J1VND821MB50T
E92F3J1VND122MB65T
E92F3J1VND152MB80T
E92F3J1VND182MBA0T
E92F3J1VNT102MU50T
E92F3J1VNT152MU65T
E92F3J1VNT182MU80T
E92F3J1VNT222MUA5T
E92F3J1VNT122MC50T
E92F3J1VNT182MC65T
E92F3J1VNT222MC80T
E92F3J1VNT332MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.302
0.255
0.178
0.195
0.164
0.112
0.076
0.061
0.121
0.083
0.066
0.055
0.111
0.074
0.062
0.051
0.103
0.069
0.056
0.037
2.1
2.5
3.4
3.1
3.8
4.9
6.4
7.9
4.6
6.0
7.3
8.7
5.1
6.8
8.0
9.9
5.5
7.3
8.8
12.2
270
390
560
390
560
820
1,000
1,200
680
1,000
1,200
1,800
1,000
1,200
E92F401VSN271MR40T
E92F401VSN391MR50T
E92F401VSN561MR65T
E92F401VSN391MA40T
E92F401VSN561MA50T
E92F401VND821MA65T
E92F401VND102MA80T
E92F401VND122MAA0T
E92F401VND681MB50T
E92F401VND102MB65T
E92F401VND122MB80T
E92F401VND182MBA0T
E92F401VNT102MU50T
E92F401VNT122MU65T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
0.339
0.235
0.164
0.225
0.156
0.107
0.088
0.073
0.141
0.096
0.080
0.053
0.100
0.083
2.0
2.6
3.5
2.9
3.9
5.0
5.9
7.2
4.3
5.6
6.6
8.8
5.4
6.4
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
15
U92F
400 Volts
450 Volts Surge
Global
Part Number†
SNAP MOUNT 85C
385 Volts
435 Volts Surge
Rated
Ripple Current
(A rms) at
85C, 120Hz
Capacitance
(µF )
Engineering Bulletin Aug 2013
U92F Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
400 Volts
450 Volts Surge
420 Volts
U92F
SNAP MOUNT 85C
470 Volts Surge
450 Volts
500 Volts Surge
500 Volts
550 Volts Surge
Rated
Ripple Current
(A rms) at
85C, 120Hz
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
1,800
2,200
1,200
1,800
2,200
2,700
E92F401VNT182MU80T
E92F401VNT222MUA5T
E92F401VNT122MC50T
E92F401VNT182MC65T
E92F401VNT222MC80T
E92F401VNT272MCA5T
45 80
45 105
50 50
50 65
50 80
50 105
U80
UA5
C50
C65
C80
CA5
0.055
0.045
0.093
0.062
0.051
0.041
8.5
10.4
5.6
7.7
9.3
11.6
220
330
470
390
560
680
1,000
1,200
560
820
1,200
1,500
820
1,200
1,500
1,800
1,000
1,500
1,800
2,700
E92F421VSN221MR40T
E92F421VSN331MR50T
E92F421VSN471MR65T
E92F421VSN391MA40T
E92F421VSN561MA50T
E92F421VND681MA65T
E92F421VND102MA80T
E92F421VND122MAA0T
E92F421VND561MB50T
E92F421VND821MB65T
E92F421VND122MB80T
E92F421VND152MBA0T
E92F421VNT821MU50T
E92F421VNT122MU65T
E92F421VNT152MU80T
E92F421VNT182MUA5T
E92F421VNT102MC50T
E92F421VNT152MC65T
E92F421VNT182MC80T
E92F421VNT272MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.331
0.241
0.172
0.213
0.155
0.110
0.086
0.066
0.131
0.094
0.073
0.057
0.110
0.079
0.062
0.045
0.093
0.067
0.052
0.038
2.0
2.6
3.5
3.0
3.9
5.0
6.0
7.6
4.4
5.7
6.9
8.6
5.1
6.6
8.0
10.5
5.6
7.4
9.1
12.1
220
330
390
390
470
680
820
1,000
560
820
1,000
1,200
680
1,000
1,200
1,800
820
1,200
1,500
2,200
E92F451VSN221MR40T
E92F451VSN331MR50T
E92F451VSN391MR65T
E92F451VSN391MA40T
E92F451VSN471MA50T
E92F451VND681MA65T
E92F451VND821MA80T
E92F451VND102MAA0T
E92F451VND561MB50T
E92F451VND821MB65T
E92F451VND102MB80T
E92F451VND122MBA0T
E92F451VNT681MU50T
E92F451VNT102MU65T
E92F451VNT122MU80T
E92F451VNT182MUA5T
E92F451VNT821MC50T
E92F451VNT122MC65T
E92F451VNT152MC80T
E92F451VNT222MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.340
0.248
0.177
0.249
0.159
0.113
0.088
0.068
0.135
0.097
0.075
0.058
0.114
0.081
0.063
0.046
0.093
0.066
0.052
0.038
2.0
2.6
3.4
2.8
3.8
4.9
5.9
7.5
4.4
5.6
6.8
8.4
5.0
6.5
7.9
10.3
5.6
7.4
9.2
12.1
180
220
330
270
330
470
E92F501VSN181MR40T
E92F501VSN221MR50T
E92F501VSN331MR65T
E92F501VSN271MA40T
E92F501VSN331MA50T
E92F501VND471MA65T
30 40
30 50
30 65
35 40
35 50
35 65
R40
R50
R65
A40
A50
A65
0.464
0.380
0.253
0.295
0.241
0.169
1.7
2.1
2.8
2.6
3.1
4.0
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
16
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92F Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
500 Volts
550 Volts Surge
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
560
820
470
680
820
1,200
560
820
1,200
1,500
820
1,200
1,500
1,800
E92F501VND561MA80T
E92F501VND821MAA0T
E92F501VND471MB50T
E92F501VND681MB65T
E92F501VND821MB80T
E92F501VND122MBA0T
E92F501VNT561MU50T
E92F501VNT821MU65T
E92F501VNT122MU80T
E92F501VNT152MUA5T
E92F501VNT821MC50T
E92F501VNT122MC65T
E92F501VNT152MC80T
E92F501VNT182MCA5T
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.142
0.097
0.178
0.123
0.102
0.070
0.164
0.112
0.076
0.061
0.121
0.083
0.066
0.055
Rated
Ripple Current
(A rms) at
85C, 120Hz
4.7
6.2
3.8
5.0
5.8
7.7
4.2
5.5
7.2
9.0
4.9
6.6
8.1
10.0
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
17
U92F
SNAP MOUNT 85C
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
U92L Series
Snap Mount
Specific Design
For Higher Ripple
Current
350 to 500VDC
Voltage Range
RoHS Compliant
85C Maximum
Temperature
10,000 Hours
Lifetime at 85C
U92L
SNAP MOUNT 85C
The U92L series is a longer life series specifically designed for higher ripple current capability. The
U92L capacitors have an endurance rating of 10,000 hours at 85C with the rated ripple current
applied. All U92L series capacitors are RoHS compliant and available in a variety of sizes, with or
without an end disk, and encased in a PET sleeve or standard Pb-free PVC sleeve. Snap-in terminals
(2, 4 or 5 -pin configurations) are available as standard or optional styles depending on case size.
Straight standoff terminals (5 -pin configuration) are an option for 40, 45 and 50mm can diameters.
Summary of Specifications
PC board snap-in or straight standoff terminals available as standard or optional
styles depending on pin styles and case size.
Capacitance range: 150 to 3,300µF.
Voltage range: 350 to 500VDC.
Category temperature range: 25C to 85C.
Leakage current: 3 CV (µA) or 3mA, whichever is smaller, after 5 minutes at 20C.
Standard capacitance tolerance: 20%
Nominal case size (DL): 3040mm to 50105mm.
Rated lifetime: 10,000 hours at 85C with the rated ripple current applied.
18
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92L Series
U92L Specifications - Snap Mount
Item
Characteristics
Category Temperature Range
25 to 85C
Rated Voltage Range
350 to 500VDC
Capacitance Range
150 to 3,300F
Capacitance Tolerance
20% ( M ) at 20C, 120Hz
Leakage Current
I = 3 CV (A ) or 3mA, whichever is smaller, after 5 minutes at 20C.
Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V )
Dissipation Factor ( Tan )
At 20C, 120Hz
Rated Voltage ( V )
350 - 400
420 -500
0.15
0.20
Tan ( DF ) Max.
Low Temperature
Characteristics
At 120Hz, impedance ( Z ) ratio between the 25C value and 20C value shall not exceed
the values given below.
Rated Voltage ( V )
350 -500
Z (25C ) / Z (20C )
Rated Ripple Current Multipliers
8
Ambient Temperature (C )
45C
65C
85C
2.82
1.73
1.00
Frequency (Hz )
Endurance
(Load Life)
DC Rated Voltage
50Hz
120Hz
300Hz
1kHz
10kHz
100kHz
350 - 450V
0.77
1.00
1.16
1.30
1.41
1.43
500V
0.70
1.00
1.16
1.30
1.41
1.43
The following specifications shall be satisfied when the capacitors are restored to 20C after
subjecting them to DC voltage for 10,000 hours at 85C with the rated ripple current applied.
The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of
the capacitors.
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 200% of initial specified value
Leakage current
: ≤ initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after
exposing them for 1,000 hours at 85C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
19
U92L
SNAP MOUNT 85C
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 150% of initial specified value
Leakage current
: ≤ initial specified value
Engineering Bulletin Aug 2013
U92L Series
Diagram of Dimensions - Snap Mount
Unit: mm
Snap Mount
VND Snap-in Ø 35 and Ø 40 standard; Ø 45 optional
VSD Snap-in Ø 35 and Ø 40 optional
VSN Snap-in Ø 30 and Ø 35 standard
VNN Snap-in Ø 30 and Ø 35 optional
*** Black Insulating Sleeve
Negative Mark
PC Board Pin-out
*** Black Insulating Sleeve
Negative Mark
PC Board Pin-out
A*
D 1
** Vent
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
** Vent
Negative Mark
PC Board Pin-out
3.3 0.1
4.75 0.1
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
L
C*
See
Pin
Detail
2.5
2-4x
VNT Snap-in Ø 45 and Ø 50 standard
D 1
** Vent
22.5
B
Insulating Disk
VEN Snap-in Ø 30 and Ø 35 optional
*** Black Insulating Sleeve
D 1
30°
2.5 MIN.-1x
*** Black Insulating Sleeve
Negative Mark
A
B*
C
PC Board Pin-out
360°
6
D 1
** Vent
25
L
Insulating Disk
2-5x
D
See
Pin
Detail
2.5
VS, VE & VN Snap-in Pin Dimensions
W2
W1
P
Straight Pin Mount
Edge
of can
VQT Straight Standoff Ø 40, Ø 45 and Ø 50 optional
W
*** Black Insulating Sleeve
U92L
SNAP MOUNT 85C
Type
VSN Ø 30
VSN Ø 35
VNN Ø 30 - Ø 35
VEN Ø 30 - Ø 35
VSD Ø 35 - Ø 40
VND Ø 35 - Ø 45
VNT Ø 45 - Ø 50
P
4.00.5
3.50.5
5.81.0
4.00.5
3.51.0
5.81.0
5.81.0
W
W1
Negative Mark
W2
PC Board Pin-out
360°
6
B*
A*
C
D 1
1.50.2
0.80.1
0.80.1
** Vent
25
L
D*
See
Pin
Detail
2.5
Insulating Disk
2-5x
VQ Standoff Pin Dimensions
W1
W
P
CAUTION:
* Use the blank terminals for mechanical support only. The
blank terminals must not be connected to a solder trace on
the PC board but be electrically isolated from the negative
and positive terminals.
** The vent may be located either on the bottom or side of
the can.
*** The black sleeve with gray stripe negative pin indicator
is standard. Also note in some cases, the sleeve color may
change slightly due to the operating conditions, however,
the discoloration will not impair capacitor function.
Edge
of can
P1
Type
Standoff Pin (VQ)
P
3.751.0
P1
2.0 max.
W
1.50.1
W1
0.70.2
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
20
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92L Series
Part Numbering System for U92L Series
When ordering, always specify complete 18-field global part number.
18 Fields
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
E 9 2 L 4 5 1 V S N 4 7 1 M A 5 0 T
9
8
7
6
5
4
1
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
21
U92L
2
Capacitance. Fields 11, 12 and 13.
Expressed in Microfarads. The first two digits are significant
figures inserted in fields 11 and 12, and the third digit inserted
in field 13 indicates the number of zeros for capacitance of
10F or more. R indicates the decimal point for capacitance
less than 10F (e.g. 4R7 = 4.7F; 470 = 47F; 471 = 470F;
472 = 4,700F; 473 = 47,000F ).
Dummy Terminals. Field 10.
N = No dummy terminals.
D = 2 dummy terminals.
T = 3 dummy terminals.
Terminal Type. Fields 8 and 9.
VS = Snap-in pins, 4.0mm in length ( Ø30 VSN);
3.5mm in length ( Ø35 VSN, Ø35 or Ø40 VSD).
VN = Snap-in pins, 5.8mm in length.
VE = Snap-in pins, polarized, Ø30 or Ø35 option.
VQ = Straight standoff pins.
DC Rated Voltage. Fields 5, 6 and 7.
Expressed in Volts. The first two digits are significant figures
inserted in fields 5 and 6, and the third digit inserted in field 7
indicates the number of zeros for rated voltage of 10VDC or
more. R indicates the decimal point for rated voltage less than
10VDC (e.g. 4R5 = 4.5VDC; 450 = 45VDC; 451 = 450VDC).
Rule Exception: Coding for rated voltage 385VDC = 3J1.
Series Name. Fields 2, 3 and 4.
Enter the 3-letter/digit series name in fields 2, 3 and 4. If the
series name is only 2 letters/digits, place a dash in field 4.
For a series name with more than 3 letters/digits, refer to the
individual series for the appropriate 3-field series name.
Capacitor Type. Field 1.
Aluminum Electrolytic Capacitor (Polar).
SNAP MOUNT 85C
3
Supplement Code. Field 18.
All construction options listed have Sn100% terminal plating.
T = Pb-free PVC sleeve with end disk.
M = Pb-free PVC sleeve without end disk.
W = PET sleeve with end disk.
S = PET sleeve without end disk.
Case Size. Fields 15, 16 and 17.
The single letter diameter code is inserted in field 15.
R = Ø 30mm
A = Ø 35mm
B = Ø 40mm
U = Ø 45mm
C = Ø 50mm
The double digit length code is inserted in fields 16 and 17.
40 = 40mm
50 = 50mm
65 = 65mm
80 = 80mm
A0 = 100mm
A5 = 105mm
Capacitance Tolerance. Field 14.
M = 20%
Engineering Bulletin Aug 2013
U92L Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
350 Volts
400 Volts Surge
385 Volts
U92L
SNAP MOUNT 85C
435 Volts Surge
400 Volts
450 Volts Surge
Rated
Ripple Current
(A rms) at
85C, 120Hz
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
330
470
680
470
680
1,000
1,200
1,500
820
1,200
1,500
2,200
1,200
1,500
2,200
2,700
1,500
2,200
2,700
3,300
E92L351VSN331MR40T
E92L351VSN471MR50T
E92L351VSN681MR65T
E92L351VSN471MA40T
E92L351VSN681MA50T
E92L351VND102MA65T
E92L351VND122MA80T
E92L351VND152MAA0T
E92L351VND821MB50T
E92L351VND122MB65T
E92L351VND152MB80T
E92L351VND222MBA0T
E92L351VNT122MU50T
E92L351VNT152MU65T
E92L351VNT222MU80T
E92L351VNT272MUA5T
E92L351VNT152MC50T
E92L351VNT222MC65T
E92L351VNT272MC80T
E92L351VNT332MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.314
0.220
0.152
0.212
0.146
0.100
0.083
0.066
0.126
0.086
0.069
0.047
0.096
0.077
0.052
0.043
0.088
0.060
0.049
0.040
2.1
2.7
3.7
3.0
4.0
5.2
6.1
7.6
4.5
5.9
7.1
9.4
5.5
6.7
8.7
10.7
5.8
7.8
9.5
11.8
270
390
560
470
560
820
1,200
1,500
820
1,200
1,500
1,800
1,000
1,200
1,800
2,200
1,200
1,800
2,200
2,700
E92L3J1VSN271MR40T
E92L3J1VSN391MR50T
E92L3J1VSN561MR65T
E92L3J1VSN471MA40T
E92L3J1VSN561MA50T
E92L3J1VND821MA65T
E92L3J1VND122MA80T
E92L3J1VND152MAA0T
E92L3J1VND821MB50T
E92L3J1VND122MB65T
E92L3J1VND152MB80T
E92L3J1VND182MBA0T
E92L3J1VNT102MU50T
E92L3J1VNT122MU65T
E92L3J1VNT182MU80T
E92L3J1VNT222MUA5T
E92L3J1VNT122MC50T
E92L3J1VNT182MC65T
E92L3J1VNT222MC80T
E92L3J1VNT272MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.369
0.255
0.178
0.203
0.171
0.117
0.080
0.064
0.121
0.083
0.066
0.055
0.107
0.090
0.060
0.049
0.103
0.069
0.056
0.046
1.9
2.5
3.4
3.1
3.7
4.8
6.2
7.7
4.6
6.0
7.3
8.7
5.2
6.2
8.2
10.0
5.5
7.3
8.8
11.0
270
390
560
390
560
820
1,000
1,200
680
1,000
1,200
1,800
1,000
1,200
E92L401VSN271MR40T
E92L401VSN391MR50T
E92L401VSN561MR65T
E92L401VSN391MA40T
E92L401VSN561MA50T
E92L401VND821MA65T
E92L401VND102MA80T
E92L401VND122MAA0T
E92L401VND681MB50T
E92L401VND102MB65T
E92L401VND122MB80T
E92L401VND182MBA0T
E92L401VNT102MU50T
E92L401VNT122MU65T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
0.354
0.245
0.171
0.235
0.164
0.112
0.092
0.076
0.146
0.100
0.083
0.055
0.107
0.090
1.9
2.6
3.5
2.9
3.8
4.9
5.8
7.0
4.2
5.5
6.5
8.7
5.2
6.2
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
22
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92L Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
400 Volts
450 Volts Surge
420 Volts
470 Volts Surge
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
1,500
2,200
1,200
1,500
2,200
2,700
E92L401VNT152MU80T
E92L401VNT222MUA5T
E92L401VNT122MC50T
E92L401VNT152MC65T
E92L401VNT222MC80T
E92L401VNT272MCA5T
45 80
45 105
50 50
50 65
50 80
50 105
U80
UA5
C50
C65
C80
CA5
0.072
0.049
0.100
0.080
0.054
0.044
7.5
10.0
5.4
6.8
9.0
11.2
220
330
470
390
560
680
820
1,200
680
820
1,200
1,500
820
1,200
1,500
1,800
1,000
1,500
1,800
2,200
E92L421VSN221MR40T
E92L421VSN331MR50T
E92L421VSN471MR65T
E92L421VSN391MA40T
E92L421VSN561MA50T
E92L421VND681MA65T
E92L421VND821MA80T
E92L421VND122MAA0T
E92L421VND681MB50T
E92L421VND821MB65T
E92L421VND122MB80T
E92L421VND152MBA0T
E92L421VNT821MU50T
E92L421VNT122MU65T
E92L421VNT152MU80T
E92L421VNT182MUA5T
E92L421VNT102MC50T
E92L421VNT152MC65T
E92L421VNT182MC80T
E92L421VNT222MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.408
0.298
0.212
0.264
0.193
0.137
0.106
0.082
0.150
0.107
0.084
0.065
0.130
0.093
0.073
0.053
0.113
0.081
0.063
0.046
1.8
2.3
3.1
2.7
3.5
4.4
5.4
6.8
4.2
5.3
6.5
8.0
4.7
6.1
7.4
9.6
5.1
6.7
8.3
10.9
220
330
390
330
470
680
820
1,000
560
820
1,000
1,200
680
1,000
1,200
1,800
820
1,200
1,500
2,200
E92L451VSN221MR40T
E92L451VSN331MR50T
E92L451VSN391MR65T
E92L451VSN331MA40T
E92L451VSN471MA50T
E92L451VND681MA65T
E92L451VND821MA80T
E92L451VND102MAA0T
E92L451VND561MB50T
E92L451VND821MB65T
E92L451VND102MB80T
E92L451VND122MBA0T
E92L451VNT681MU50T
E92L451VNT102MU65T
E92L451VNT122MU80T
E92L451VNT182MUA5T
E92L451VNT821MC50T
E92L451VNT122MC65T
E92L451VNT152MC80T
E92L451VNT222MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.428
0.312
0.222
0.318
0.202
0.143
0.111
0.086
0.170
0.122
0.095
0.073
0.142
0.102
0.079
0.058
0.120
0.086
0.067
0.049
1.8
2.3
3.0
2.5
3.4
4.3
5.3
6.6
3.9
5.0
6.1
7.5
4.5
5.8
7.1
9.2
5.0
6.5
8.1
10.6
150
220
270
220
330
390
E92L501VSN151MR40T
E92L501VSN221MR50T
E92L501VSN271MR65T
E92L501VSN221MA40T
E92L501VSN331MA50T
E92L501VND391MA65T
30 40
30 50
30 65
35 40
35 50
35 65
R40
R50
R65
A40
A50
A65
0.557
0.380
0.310
0.380
0.253
0.214
1.6
2.1
2.6
2.3
3.0
3.6
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
23
U92L
500 Volts
550 Volts Surge
Global
Part Number†
SNAP MOUNT 85C
450 Volts
500 Volts Surge
Rated
Ripple Current
(A rms) at
85C, 120Hz
Capacitance
(µF )
Engineering Bulletin Aug 2013
U92L Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
500 Volts
550 Volts Surge
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
560
680
390
560
680
1,000
560
820
1,000
1,500
680
1,000
1,200
1,800
E92L501VND561MA80T
E92L501VND681MAA0T
E92L501VND391MB50T
E92L501VND561MB65T
E92L501VND681MB80T
E92L501VND102MBA0T
E92L501VNT561MU50T
E92L501VNT821MU65T
E92L501VNT102MU80T
E92L501VNT152MUA5T
E92L501VNT681MC50T
E92L501VNT102MC65T
E92L501VNT122MC80T
E92L501VNT182MCA5T
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.149
0.123
0.225
0.156
0.129
0.088
0.164
0.112
0.092
0.061
0.146
0.100
0.083
0.055
Rated
Ripple Current
(A rms) at
85C, 120Hz
4.6
5.6
3.4
4.4
5.2
6.9
4.2
5.5
6.6
9.0
4.5
6.1
7.2
10.0
U92L
SNAP MOUNT 85C
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
24
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
U92X Series
Snap Mount
Specific Design
For Higher Ripple
Current
350 to 500VDC
Voltage Range
RoHS Compliant
85C Maximum
Temperature
15,000 Hours
Lifetime at 85C
The U92X series is a longest life series specifically designed for higher ripple current capability. The
U92X capacitors have an endurance rating of 15,000 hours at 85C with the rated ripple current
applied. All U92X series capacitors are RoHS compliant and available in a variety of sizes, with or
without an end disk, and encased in a PET sleeve or standard Pb-free PVC sleeve. Snap-in terminals
(2, 4 or 5 -pin configurations) are available as standard or optional styles depending on case size.
Straight standoff terminals (5 -pin configuration) are an option for 40, 45 and 50mm can diameters.
Summary of Specifications
PC board snap-in or straight standoff terminals available as standard or optional
styles depending on pin styles and case size.
Capacitance range: 150 to 3,300µF.
Voltage range: 350 to 500VDC.
Category temperature range: 25C to 85C.
25
U92X
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
SNAP MOUNT 85C
Leakage current: 3 CV (µA) or 3mA, whichever is smaller, after 5 minutes at 20C.
Standard capacitance tolerance: 20%
Nominal case size (DL): 3040mm to 50105mm.
Rated lifetime: 15,000 hours at 85C with the rated ripple current applied.
Engineering Bulletin Aug 2013
U92X Series
U92X Specifications - Snap Mount
Item
Characteristics
Category Temperature Range
25 to 85C
Rated Voltage Range
350 to 500VDC
Capacitance Range
150 to 3,300F
Capacitance Tolerance
20% ( M ) at 20C, 120Hz
Leakage Current
I = 3 CV (A ) or 3mA, whichever is smaller, after 5 minutes at 20C.
Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V )
Dissipation Factor ( Tan )
At 20C, 120Hz
Rated Voltage ( V )
350 - 400
420 -500
0.15
0.20
Tan ( DF ) Max.
Low Temperature
Characteristics
At 120Hz, impedance ( Z ) ratio between the 25C value and 20C value shall not exceed
the values given below.
Rated Voltage ( V )
350 -500
Z (25C ) / Z (20C )
Rated Ripple Current Multipliers
8
Ambient Temperature (C )
45C
65C
85C
2.82
1.73
1.00
Frequency (Hz )
Endurance
(Load Life)
DC Rated Voltage
50Hz
120Hz
300Hz
1kHz
10kHz
100kHz
350 - 450V
0.77
1.00
1.16
1.30
1.41
1.43
500V
0.70
1.00
1.16
1.30
1.41
1.43
The following specifications shall be satisfied when the capacitors are restored to 20C after
subjecting them to DC voltage for 15,000 hours at 85C with the rated ripple current applied.
The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of
the capacitors.
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 200% of initial specified value
Leakage current
: ≤ initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after
exposing them for 1,000 hours at 85C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
U92X
SNAP MOUNT 85C
Capacitance change: ≤ 20% of initial measured value
Tan ( DF )
: ≤ 150% of initial specified value
Leakage current
: ≤ initial specified value
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
26
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92X Series
Diagram of Dimensions - Snap Mount
Unit: mm
Snap Mount
VND Snap-in Ø 35 and Ø 40 standard; Ø 45 optional
VSD Snap-in Ø 35 and Ø 40 optional
VSN Snap-in Ø 30 and Ø 35 standard
VNN Snap-in Ø 30 and Ø 35 optional
*** Black Insulating Sleeve
Negative Mark
PC Board Pin-out
*** Black Insulating Sleeve
Negative Mark
PC Board Pin-out
A*
D 1
** Vent
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
** Vent
Negative Mark
PC Board Pin-out
3.3 0.1
4.75 0.1
10
L
2-2x
See
Pin
Detail
2.5
Insulating Disk
L
C*
See
Pin
Detail
2.5
2-4x
VNT Snap-in Ø 45 and Ø 50 standard
D 1
** Vent
22.5
B
Insulating Disk
VEN Snap-in Ø 30 and Ø 35 optional
*** Black Insulating Sleeve
D 1
30°
2.5 MIN.-1x
*** Black Insulating Sleeve
Negative Mark
A
B*
C
PC Board Pin-out
360°
6
D 1
** Vent
25
L
Insulating Disk
2-5x
D
See
Pin
Detail
2.5
VS, VE & VN Snap-in Pin Dimensions
W2
W1
P
Straight Pin Mount
Edge
of can
VQT Straight Standoff Ø 40, Ø 45 and Ø 50 optional
W
*** Black Insulating Sleeve
Type
VSN Ø 30
VSN Ø 35
VNN Ø 30 - Ø 35
VEN Ø 30 - Ø 35
VSD Ø 35 - Ø 40
VND Ø 35 - Ø 45
VNT Ø 45 - Ø 50
P
4.00.5
3.50.5
5.81.0
4.00.5
3.51.0
5.81.0
5.81.0
W
W1
Negative Mark
W2
PC Board Pin-out
360°
6
B*
A*
C
D 1
1.50.2
0.80.1
0.80.1
** Vent
25
L
D*
See
Pin
Detail
2.5
Insulating Disk
2- 5x
VQ Standoff Pin Dimensions
W1
W
P
CAUTION:
* Use the blank terminals for mechanical support only. The
blank terminals must not be connected to a solder trace on
the PC board but be electrically isolated from the negative
and positive terminals.
** The vent may be located either on the bottom or side of
the can.
*** The black sleeve with gray stripe negative pin indicator
is standard. Also note in some cases, the sleeve color may
change slightly due to the operating conditions, however,
the discoloration will not impair capacitor function.
Edge
of can
P1
Type
Standoff Pin (VQ)
P
3.751.0
P1
2.0 max.
W
1.50.1
W1
0.70.2
27
U92X
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
SNAP MOUNT 85C
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
Engineering Bulletin Aug 2013
U92X Series
Part Numbering System for U92X Series
When ordering, always specify complete 18-field global part number.
18 Fields
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
E 9 2 X 5 0 1 V N T 6 8 1 MU 6 5 T
9
8
7
6
5
4
3
2
U92X
SNAP MOUNT 85C
1
Supplement Code. Field 18.
All construction options listed have Sn100% terminal plating.
T = Pb-free PVC sleeve with end disk.
M = Pb-free PVC sleeve without end disk.
W = PET sleeve with end disk.
S = PET sleeve without end disk.
Case Size. Fields 15, 16 and 17.
The single letter diameter code is inserted in field 15.
R = Ø 30mm
A = Ø 35mm
B = Ø 40mm
U = Ø 45mm
C = Ø 50mm
The double digit length code is inserted in fields 16 and 17.
40 = 40mm
50 = 50mm
65 = 65mm
80 = 80mm
A0 = 100mm
A5 = 105mm
Capacitance Tolerance. Field 14.
M = 20%
Capacitance. Fields 11, 12 and 13.
Expressed in Microfarads. The first two digits are significant
figures inserted in fields 11 and 12, and the third digit inserted
in field 13 indicates the number of zeros for capacitance of
10F or more. R indicates the decimal point for capacitance
less than 10F (e.g. 6R8 = 6.8F; 680 = 68F; 681 = 680F;
682 = 6,800F; 683 = 68,000F ).
Dummy Terminals. Field 10.
N = No dummy terminals.
D = 2 dummy terminals.
T = 3 dummy terminals.
Terminal Type. Fields 8 and 9.
VS = Snap-in pins, 4.0mm in length ( Ø30 VSN);
3.5mm in length ( Ø35 VSN, Ø35 or Ø40 VSD).
VN = Snap-in pins, 5.8mm in length.
VE = Snap-in pins, polarized, Ø30 or Ø35 option.
VQ = Straight standoff pins.
DC Rated Voltage. Fields 5, 6 and 7.
Expressed in Volts. The first two digits are significant figures
inserted in fields 5 and 6, and the third digit inserted in field 7
indicates the number of zeros for rated voltage of 10VDC or
more. R indicates the decimal point for rated voltage less than
10VDC (e.g. 5R0 = 5.0VDC; 500 = 50VDC; 501 = 500VDC).
Rule Exception: Coding for rated voltage 385VDC = 3J1.
Series Name. Fields 2, 3 and 4.
Enter the 3-letter/digit series name in fields 2, 3 and 4. If the
series name is only 2 letters/digits, place a dash in field 4.
For a series name with more than 3 letters/digits, refer to the
individual series for the appropriate 3-field series name.
Capacitor Type. Field 1.
Aluminum Electrolytic Capacitor (Polar).
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
28
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92X Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
350 Volts
400 Volts Surge
385 Volts
435 Volts Surge
400 Volts
450 Volts Surge
Rated
Ripple Current
(A rms) at
85C, 120Hz
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
330
470
680
470
680
1,000
1,200
1,500
820
1,200
1,500
1,800
1,000
1,500
1,800
2,700
1,200
1,800
2,200
3,300
E92X351VSN331MR40T
E92X351VSN471MR50T
E92X351VSN681MR65T
E92X351VSN471MA40T
E92X351VSN681MA50T
E92X351VND102MA65T
E92X351VND122MA80T
E92X351VND152MAA0T
E92X351VND821MB50T
E92X351VND122MB65T
E92X351VND152MB80T
E92X351VND182MBA0T
E92X351VNT102MU50T
E92X351VNT152MU65T
E92X351VNT182MU80T
E92X351VNT272MUA5T
E92X351VNT122MC50T
E92X351VNT182MC65T
E92X351VNT222MC80T
E92X351VNT332MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.302
0.212
0.146
0.195
0.135
0.092
0.076
0.061
0.121
0.083
0.066
0.055
0.107
0.072
0.060
0.040
0.103
0.069
0.056
0.037
2.1
2.8
3.7
3.1
4.2
5.4
6.4
7.9
4.6
6.0
7.3
8.7
5.2
6.9
8.2
11.1
5.4
7.3
8.8
12.2
270
390
560
390
560
820
1,000
1,200
680
1,000
1,200
1,800
1,000
1,200
1,500
2,200
1,200
1,500
2,200
2,700
E92X3J1VSN271MR40T
E92X3J1VSN391MR50T
E92X3J1VSN561MR65T
E92X3J1VSN391MA40T
E92X3J1VSN561MA50T
E92X3J1VND821MA65T
E92X3J1VND102MA80T
E92X3J1VND122MAA0T
E92X3J1VND681MB50T
E92X3J1VND102MB65T
E92X3J1VND122MB80T
E92X3J1VND182MBA0T
E92X3J1VNT102MU50T
E92X3J1VNT122MU65T
E92X3J1VNT152MU80T
E92X3J1VNT222MUA5T
E92X3J1VNT122MC50T
E92X3J1VNT152MC65T
E92X3J1VNT222MC80T
E92X3J1VNT272MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.339
0.235
0.164
0.225
0.156
0.107
0.088
0.073
0.135
0.092
0.076
0.051
0.100
0.083
0.066
0.045
0.096
0.077
0.052
0.043
2.0
2.6
3.5
2.9
3.9
5.0
5.9
7.2
4.4
5.8
6.8
9.0
5.4
6.4
7.7
10.4
5.7
6.9
9.1
11.4
270
390
470
390
560
680
1,000
1,200
680
1,000
1,200
1,500
820
1,200
E92X401VSN271MR40T
E92X401VSN391MR50T
E92X401VSN471MR65T
E92X401VSN391MA40T
E92X401VSN561MA50T
E92X401VND681MA65T
E92X401VND102MA80T
E92X401VND122MAA0T
E92X401VND681MB50T
E92X401VND102MB65T
E92X401VND122MB80T
E92X401VND152MBA0T
E92X401VNT821MU50T
E92X401VNT122MU65T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
0.339
0.235
0.195
0.225
0.156
0.129
0.088
0.073
0.135
0.092
0.076
0.061
0.121
0.083
2.0
2.6
3.2
2.9
3.9
4.6
5.9
7.2
4.4
5.8
6.8
8.2
4.9
6.4
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
29
U92X
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
SNAP MOUNT 85C
Capacitance
(µF )
Engineering Bulletin Aug 2013
U92X Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
400 Volts
450 Volts Surge
420 Volts
470 Volts Surge
450 Volts
500 Volts Surge
500 Volts
U92X
SNAP MOUNT 85C
550 Volts Surge
Rated
Ripple Current
(A rms) at
85C, 120Hz
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
1,500
2,200
1,200
1,500
1,800
2,700
E92X401VNT152MU80T
E92X401VNT222MUA5T
E92X401VNT122MC50T
E92X401VNT152MC65T
E92X401VNT182MC80T
E92X401VNT272MCA5T
45 80
45 105
50 50
50 65
50 80
50 105
U80
UA5
C50
C65
C80
CA5
0.066
0.045
0.093
0.074
0.062
0.041
7.7
10.4
5.6
7.0
8.4
11.6
220
330
470
390
470
680
820
1,200
680
820
1,200
1,500
820
1,000
1,200
1,800
1,000
1,200
1,800
2,200
E92X421VSN221MR40T
E92X421VSN331MR50T
E92X421VSN471MR65T
E92X421VSN391MA40T
E92X421VSN471MA50T
E92X421VND681MA65T
E92X421VND821MA80T
E92X421VND122MAA0T
E92X421VND681MB50T
E92X421VND821MB65T
E92X421VND122MB80T
E92X421VND152MBA0T
E92X421VNT821MU50T
E92X421VNT102MU65T
E92X421VNT122MU80T
E92X421VNT182MUA5T
E92X421VNT102MC50T
E92X421VNT122MC65T
E92X421VNT182MC80T
E92X421VNT222MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.389
0.284
0.202
0.251
0.183
0.130
0.101
0.078
0.142
0.102
0.079
0.061
0.124
0.089
0.069
0.051
0.109
0.078
0.061
0.044
1.9
2.4
3.2
2.8
3.6
4.6
5.5
7.0
4.3
5.5
6.6
8.2
4.8
6.2
7.6
9.9
5.2
6.8
8.5
11.2
220
330
390
330
470
560
820
1,000
560
820
1,000
1,200
680
1,000
1,200
1,800
820
1,200
1,500
2,200
E92X451VSN221MR40T
E92X451VSN331MR50T
E92X451VSN391MR65T
E92X451VSN331MA40T
E92X451VSN471MA50T
E92X451VND561MA65T
E92X451VND821MA80T
E92X451VND102MAA0T
E92X451VND561MB50T
E92X451VND821MB65T
E92X451VND102MB80T
E92X451VND122MBA0T
E92X451VNT681MU50T
E92X451VNT102MU65T
E92X451VNT122MU80T
E92X451VNT182MUA5T
E92X451VNT821MC50T
E92X451VNT122MC65T
E92X451VNT152MC80T
E92X451VNT222MCA5T
30 40
30 50
30 65
35 40
35 50
35 65
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
R40
R50
R65
A40
A50
A65
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.411
0.300
0.213
0.304
0.193
0.138
0.107
0.082
0.163
0.117
0.091
0.070
0.137
0.098
0.076
0.056
0.115
0.083
0.064
0.047
1.8
2.3
3.1
2.5
3.5
4.4
5.4
6.8
4.0
5.1
6.2
7.7
4.6
5.9
7.2
9.4
5.1
6.6
8.2
10.8
150
180
270
220
270
390
E92X501VSN151MR40T
E92X501VSN181MR50T
E92X501VSN271MR65T
E92X501VSN221MA40T
E92X501VSN271MA50T
E92X501VND391MA65T
30 40
30 50
30 65
35 40
35 50
35 65
R40
R50
R65
A40
A50
A65
0.557
0.464
0.310
0.362
0.295
0.204
1.6
1.9
2.6
2.3
2.8
3.6
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
30
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Aug 2013
U92X Series
Standard Voltage Ratings - Snap Mount
Rated
Voltage
(WVDC)
500 Volts
550 Volts Surge
Capacitance
(µF )
Global
Part Number†
Nominal
Case Size*
DL ( mm )
Case
Size
Code
Maximum ESR
( Ω ) at
20C, 120Hz
560
680
390
560
680
820
560
680
1,000
1,200
680
1,000
1,200
1,800
E92X501VND561MA80T
E92X501VND681MAA0T
E92X501VND391MB50T
E92X501VND561MB65T
E92X501VND681MB80T
E92X501VND821MBA0T
E92X501VNT561MU50T
E92X501VNT681MU65T
E92X501VNT102MU80T
E92X501VNT122MUA5T
E92X501VNT681MC50T
E92X501VNT102MC65T
E92X501VNT122MC80T
E92X501VNT182MCA5T
35 80
35 100
40 50
40 65
40 80
40 100
45 50
45 65
45 80
45 105
50 50
50 65
50 80
50 105
A80
AA0
B50
B65
B80
BA0
U50
U65
U80
UA5
C50
C65
C80
CA5
0.142
0.117
0.204
0.142
0.117
0.097
0.156
0.129
0.088
0.073
0.141
0.096
0.080
0.053
Rated
Ripple Current
(A rms) at
85C, 120Hz
4.7
5.7
3.6
4.6
5.5
6.5
4.3
5.2
6.7
8.2
4.6
6.2
7.4
10.2
† For construction and terminal options, refer to the part numbering system for descriptions and codes.
* Refer to diagram of dimensions for detailed case size specifications.
31
U92X
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
SNAP MOUNT 85C
Product specifications are subject to change without notice.
Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins.
Corporate Office
9801 West Higgins Road‚ Rosemont‚ Illinois 60018
Phone 847-696-2000 Fax 847-696-9278
Western Regional Sales Office
625 Columbia Street‚ Brea‚ California 92821
Phone 714-255-9500 Fax 714-255-9400
Southeastern Regional Sales Office
2045 Cecil Ashburn Drive, Suite 103, Huntsville, Alabama 35802
Phone 256-489-9385 Fax 256-489-9387
Internet: www.chemi-con.com
E-mail: [email protected]
For further information, please contact:
Representing North America, United Chemi-Con is a wholly owned subsidiary of Nippon Chemi-Con.
© 2013 United Chemi-Con‚ Inc.
Printed in USA
Similar pages