Frontier FB100505Z300 Smd multilayer ferrite chip bead Datasheet

FB100505 (0402) Series – SMD MULTILAYER FERRITE CHIP BEADS
(HIGH IMPEDANCE)
Rev. A
A. Electrical Specifications:
DCR Max.
(Ω)
0.05
0.15
0.15
0.20
0.25
0.25
0.35
0.50
0.65
0.65
0.85
0.20
0.30
0.35
0.35
0.40
0.50
0.65
0.85
0.05
0.30
0.40
0.50
0.50
0.70
0.80
1.00
1.00
1.30
1.50
Impedance (Ω) ±25%
@100MHz
10
30
47
60
75
120
220
300
470
600
1000
30
60
80
120
220
300
470
600
10
30
60
75
120
220
300
470
600
1000
1500
P/N
FB100505U100
FB100505U300
FB100505U470
FB100505U600
FB100505U750
FB100505U121
FB100505U221
FB100505U301
FB100505U471
FB100505U601
FB100505U102
FB100505Z300
FB100505Z600
FB100505Z800
FB100505Z121
FB100505Z221
FB100505Z301
FB100505Z471
FB100505Z601
FB100505G100
FB100505G300
FB100505G600
FB100505G750
FB100505G121
FB100505G221
FB100505G301
FB100505G471
FB100505G601
FB100505G102
FB100505G152
I rms. Max.
(mA)
800
800
500
500
500
800
700
500
500
500
500
500
500
500
500
500
200
200
200
500
500
200
200
200
100
100
100
100
100
50
B. Dimensions: mm (Inch)
Series
a
b
c
d
e
f
g
FB100505
1.0
( 0.039)
0.5
(0.020)
0.5
(0.020)
0.25
(0.010)
2.20
(0.087)
0.70
(0.028)
0.40
(0.016)
Tol.
± 0.1
(0.004 )
± 0.1
(0.004 )
± 0.1
(0.004 )
± 0.15
(0.006 )
Typ.
Typ.
Typ.
C. Part Number Key:
FB
10
05
05
Y
XXX
IMPEDANCE VALUE
MATERIAL CODE: L, U, Z, B or G
DIMENSIONS:
LENGTH (a) x WIDTH (b) x THICKNESS (c)
FAMILY: FB
®
Frontier Electronics Corp.
http://www.frontierusa.com
Page 1 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
FB100505 (0402) Series – SMD MULTILAYER FERRITE CHIP BEADS
(HIGH IMPEDANCE)
Rev. A
D. Materials:
ITEM
Initial Permeability (µiac):
Maximum Permeability (µm):
Saturation Flux Density at 10 Oe:
Curie Temperature(Tc):
Volume Resistivity (ρ):
Temperature Coefficient:
Density:
-------
L
25
125
B
45
125
Material Code
G
110
250
U
200
450
Z
500
900
Gauss
°C
2000
>200
2000
>200
1700
>130
1400
>100
1500
>130
Ω-m
1/10000°C
100000
10
100000
10
100000
13
100000
5
100000
12
g/cm³
4.8
4.8
4.8
4.8
4.8
UNIT
E. Impedance Characteristics of Materials:
a.
b.
c.
d.
e.
f.
Z Material is for applications whose blocking regions are near 100 MHz.
L Material, an improvement of B Material has sharp impedance characteristic at high frequency.
G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low
insertion loss at high frequency.
Different materials are available for different application range.
With one material, higher impedance has sharper characteristics.
Please confirm the signal wave form to choose suitable products.
F. General Information:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
FB100505-yxxx, “FB100505” = P/N, “y” = Material, “xxx” = Impedance.
Tolerance: ±25%
Small and lightweight surface mounting type
Dimensions are suitable for automatic mounting
High-density packaging with a pitch of 2.54 mm (0.1 Inch) max. is possible. This series requires less space and have greater EMI
suppression effects.
Different types with the same shape are available.
Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability.
Applicable to both flow and IR reflow soldering.
High impedance covers wide frequency ranges.
TI series can be used in high current circuits due to its low DC resistance.
Operating temperature: -40°C to +125ºC
Impedance and Current Range: From 10 Ω (800 mA) to 1500 Ω (50 mA)
Unspecified values available on request.
MSL: Level 1.
G. Applications:
1.
2.
3.
4.
5.
Game Consoles
Set Top Boxes
Cables Modems
Computers
Mobile Communication Devices (Cell Phones, Radios, etc.)
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 2 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
Similar pages