Wall DCSDW03-48S15 Up to 3 watts dc/dc converter single and dual output Datasheet

DCSDW03 SERIES
Up to 3 Watts
DC/DC Converter
Single and Dual Output
Rev A
DIP Through Hole Model
SMD Surface Mount Model
Size: 0.52in x 0.36in x 0.40in (13.2mm x 9.1mm x 10.2mm)
Size: 0.56in x 0.36in x 0.40in (14.2mm x 9.1mm x 10.2mm)
OPTIONS
• Through Hole or Surface
Mount Models
• Single or Dual Outputs
• 1600VDC or 3000VDC
Isolation
APPLICATIONS
•
•
•
•
FEATURES
• 4:1 Ultra Wide Input Range
• Ultra Small SMD or DIP Package
• SMD Package Qualified for Lead-free Reflow
Solder Process According to IPC J-STD-020D
• 1600VDC Input to Output Isolation or 3000VDC
Optional Isolation
•
•
•
•
•
CE Marked
RoHS II & REACH Compliant
No Minimum Load Required
Short Circuit Protection
UL60950-1, EN60950-1, and IEC6090-1 Safety Approvals
DESCRIPTION
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
The DCSDW03 series of DC/DC converters offers up to 3 watts of output power in a compact SMD or DIP
package. This series consists of single and dual outputs with an ultra-wide 4:1 input range. Each model in this
series is CE marked, RoHS II & REACH compliant, and protected against short circuit conditions. This series also
has UL60950-1, EN60950-1, and IEC6090-1 safety approvals. Please call factory for order details.
MODEL SELECTION TABLE
Single Output Models
Model Number(1)
DCSDW03-12S33
DCSDW03-12S05
DCSDW03-12S12
DCSDW03-12S15
DCSDW03-12S24
DCSDW03-24S33
DCSDW03-24S05
DCSDW03-24S12
DCSDW03-24S15
DCSDW03-24S24
DCSDW03-48S33
DCSDW03-48S05
DCSDW03-48S12
DCSDW03-48S15
DCSDW03-48S24
Input Voltage
Range
12VDC
(4.5~18VDC)
24VDC
(9~36VDC)
48VDC
(18~75VDC)
Output
Voltage
3.3VDC
5VDC
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
Output Current
@Full Load
700mA
600mA
250mA
200mA
125mA
700mA
600mA
250mA
200mA
125mA
700mA
600mA
250mA
200mA
125mA
No Load Input
Current
35mA
40mA
40mA
40mA
40mA
20mA
20mA
25mA
25mA
25mA
12mA
12mA
13mA
14mA
14mA
Maximum
Capacitive Load
4700µF
2530µF
1220µF
1000µF
470µF
4700µF
2530µF
1220µF
1000µF
470µF
4700µF
2530µF
1220µF
1000µF
470µF
Efficiency
76%
80%
83%
84%
82%
77%
80%
83%
83%
82%
77%
80%
83%
83%
82%
Output Power Ripple & Noise
Up to 3 Watts
50mVp-p
Up to 3 Watts
50mVp-p
Up to 3 Watts
50mVp-p
MODEL SELECTION TABLE
Dual Output Models
Model Number
DCSDW03-12D05
DCSDW03-12D12
DCSDW03-12D15
DCSDW03-24D05
DCSDW03-24D12
DCSDW03-24D15
DCSDW03-48D05
DCSDW03-48D12
DCSDW03-48D15
9/26/2017
Input Voltage
Range
12VDC
(4.5~18VDC)
24VDC
(9~36VDC)
48VDC
(18~75VDC)
Output
Voltage
±5VDC
±12VDC
±15VDC
±5VDC
±12VDC
±15VDC
±5VDC
±12VDC
±15VDC
Output Current
@Full Load
±300mA
±125mA
±100mA
±300mA
±125mA
±100mA
±300mA
±125mA
±100mA
No Load Input
Current
40mA
40mA
40mA
25mA
25mA
25mA
14mA
14mA
14mA
Maximum
Capacitive Load
±1470µF
±680µF
±470µF
±1470µF
±680µF
±470µF
±1470µF
±680µF
±470µF
Efficiency
80%
82%
82%
80%
82%
82%
80%
82%
82%
Output Power Ripple & Noise
Up to 3 Watts
50mVp-p
Up to 3 Watts
50mVp-p
Up to 3 Watts
50mVp-p
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 5
DCSDW03 SERIES
Up to 3 Watts
DC/DC Converter
Single and Dual Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
4.5
9
18
12
24
48
18
36
75
25
50
100
Unit
INPUT SPECIFICATIONS
Input Voltage Range
12Vin(nom)
24Vin(nom)
48Vin(nom)
Input Surge Voltage
1 Second, max.
Input Reflected Ripple Current(2)
12Vin(nom)
24Vin(nom)
48Vin(nom)
Input Filter
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
12Vin(nom)
24Vin(nom)
48Vin(nom)
20
20
20
Capacitor Type
Low Line to High Line at Full Load
Single
Dual
Single
10% Load to 90% Load
Dual
Asymmetrical Load 25%/100% FL, Dual
No Load to Full Load
Load Regulation
Cross Regulation
Output Power
Output Current
Maximum Capacitive Load
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
-1.0
-0.2
-1.0
-1.0
-0.5
-0.8
-5.0
Measured by 20MHz bandwidth
25% Load Step Change
Start-Up Time
Constant Resistive Load
Temperature Coefficient
Transient Response Recovery Time
REMOTE ON/OFF CONTROL
25% Load Step Change
Ctrl Pin Applied Current via 1kΩ
DC-DC ON
DC-DC OFF
mAp-p
%
%
%
%
mVp-p
µS
10
10
+0.02
-0.02
500
Open or High Impedance
2.0
3.0
4.0
2.5
Remote OFF Input Current
VDC
See Table
+1.0
+0.2
+1.0
+1.0
+0.5
+0.8
+5.0
See Table
See Table
See Table
50
500
5
5
Power Up
Remote ON/OFF
VDC
mS
%/ºC
µS
mA
mA
Application Circuit
PROTECTION
Short Circuit Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Storage Temperature
Relative Humidity
Thermal Shock
Vibration
Lead-Free Reflow Solder Process
Moisture Sensitivity Level (MSL)
MTBF
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Continuous, Automatic Recovery
Without Derating
With Derating
MIL-HDBK-217F, Full Load
71
+105
+125
95
MIL-STD-810F
MIL-STD-810F
IPC J-STD-020D
IPC J-STD-020D
5,627,000
ºC
ºC
%RH
Hours
See Table
Isolation Voltage
1 minute
Isolation Resistance
Isolation Capacitance
500VDC
9/26/2017
-40
71
-55
5
Standard
Suffix “S”
100
1600
3000
1
kHz
VDC
50
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
GΩ
pF
Page 2 of 5
DCSDW03 SERIES
Up to 3 Watts
DC/DC Converter
Single and Dual Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
PHYSICAL SPECIFICATIONS
Weight
Standard
Suffix “S”
EMI(2)
Typ
Max
Unit
0.10oz (2.7g)
0.52in x 0.36in x 0.40in
(13.2mm x 9.1mm x 10.2mm)
0.56in x 0.36in x 0.40in
(14.2mm x 9.1mm x 10.2mm)
Non-Conductive Black Plastic
Non-Conductive Black Plastic
Silicone (UL94 V-0)
Dimensions (L x W x H)
Case Material
Base Material
Potting Material
SAFETY CHARACTERISTICS
Safety Approvals
Min
UL60950-1, EN60950-1, IEC60950-1
Class A
Class B
EN55022
ESD
EN61000-4-2
Radiated Immunity
Fast Transient(3)
Surge(3)
Conducted Immunity
Power Frequency Magnetic Field
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Air ±8kV
Contact ±6kV
10 V/m
±2kV
±1kV
10 Vr.m.s
100A/m continuous; 1000A/m 1 second
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
NOTES
1.
2.
Add “S” to model number for SMD package type.
The standard module meets EMI Class A or Class B and input reflected ripple current with external component. For more information, please
contact factory.
3. An external input filter capacitor is required if the module is to meet EN61000-4-4, EN61000-4-5. Suggested filter capacitor: Nippon chemi-con KY
series, 220 µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
DERATING CURVES
DCSDW03-24S05 Derating Curve
9/26/2017
DCSDW03-24S05
Efficiency vs. Input Voltage
DCSDW03-24S05
Efficiency vs. Output Current
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 5
DCSDW03 SERIES
Up to 3 Watts
DC/DC Converter
Single and Dual Output
Rev A
MECHANICAL DRAWINGS
SMD Type
PIN Connection
SINGLE
DUAL
+Vin
+Vin
-Vin
-Vin
Ctrl
Ctrl
NC
-Vout
-Vout
Common
+Vout
+Vout
PIN
1
2
4
5
6
7
DIP Type
Notes:
1. All dimensions in inch (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pin Pitch Tolerance ±0.01 (0.25)
4. Pin Dimension Tolerance ±0.004(0.1)
MODEL NUMBER SETUP
DCSDW
03
Series Name
Output Power
-
24
S
05
S
H
Input Voltage
Output Quantity
Ouptut Voltage
Package Type
Isolation Option
12: 4.5~18VDC
S: Single
33: 3.3VDC
24: 9~36VDC
05: 5VDC
48: 18~75VDC
12: 12VDC
None: DIP Type
None: 1600VDC Isolation
S: SMD Type
H: 3000VDC Isolation
15: 15VDC
24: 24VDC
D: Dual
05: ±5VDC
12: ±12VDC
15: ±15VDC
9/26/2017
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 5
Rev A
DCSDW03 SERIES
Up to 3 Watts
DC/DC Converter
Single and Dual Output
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
9/26/2017
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 5
Similar pages