Spec Sheet PrintPDF FBAR/SAW Devices (SAW Duplexers) D5DA740M0K2L4 Features Item Summary SAW, Duplexer, 1.8x1.4x0.5mm Band17 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions LTE Dimension L 1.8 + 0/- 0.20 mm Type SAW Dimension W 1.4 + 0/- 0.20 mm Function Duplexer Dimension T Max 0.5 mm band Band17 Insertion Loss (typ) 1.25/1.65 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 65/60 dB Operating Temp. Range -30 to +85 ℃ RoHS2 Compliance (10 subst.) Yes REACH Compliance (168 subst.) Yes Soldering Reflow 2016.11.21 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Apr.13. 2016 Final Table 1. Electrical Specification Tx to ANT to Rx Min Typ Max Insertion loss(*1) 704~716 - 1. 25 1.85 dB Ripple 704~716 - 0.4 1.0 dB - 1.7 2.0 - - 1.5 2.0 - VSWR Tx 704~716 Input Power 704~716 Absolute 734~746 50 58 - dB attenuation 746~768 30 45 - dB 768~805 25 36 - dB 869~894 30 35 - dB 1408~1432 30 40 - dB 1559~1606 35 43 - dB 2110~2155 30 40 - dB 2400~2484 25 36 - dB 2816~2864 15 33 - dB 4900~5850 5 11 - dB Insertion loss(*1) 734~746 - 1.65 2.35 dB Ripple 734~746 - 0.4 1.2 dB - 1.5 2.0 - - 1.5 2.0 - VSWR Ant 734~746 Rx Tx to Rx Unit (MHz) Ant ANT Specification Condition Item 29dBm, Ta=+50oC ,50000h, CW - Absolute 704~716 55 64 - dB attenuation 776~805 35 41 - dB 814~960 40 57 - dB 1710~1755 40 54 - dB 1850~1920 40 53 - dB 2202~2238 40 51 - dB 2400~2500 40 50 - dB 4900~5950 40 50 - dB 704~716 60 65 - dB 734~746 55 60 - dB Isolation Terminating Impedance Tx port 50 Ω Rx port 50 Ω Ant port 50//12nH Ω -30 to +85 oC Operating Temperature Maximum DC in all ports - - 5 VDC Device only Device only DC impedance to ground 100 MΩ Device size (L typ. x W typ. x H max.) 1.8 x 1.4 x 0.5 mm (*1)Specification of insertion loss excludes loss that comes from the test board. Remarks Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Apr.13. 2016 Final Dimensions 0.5 < Top View > < Side View > < Bottom View > Unit: mm Pin assignment Pin No. Pin name Description 1 Rx Receiver 2 GND Ground 3 Tx Transmitter 4 GND Ground 5 GND Ground 6 ANT Antenna 7 GND Ground 8 GND Ground Figure 1. Dimensions and Pin assignment Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Apr.13. 2016 Final Evaluation Circuit Ant(50Ω) L=12nH(Q= ) 6 Rx (50Ω) 1 GND 2,4,5 7,8 3 Tx (50Ω) 1-8:Pin No. Recommended foot print pattern Common GND External appearance in Chip carrier :Pad pattern :Resist pattern Figure 2. Recommended foot print pattern Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Tx to Ant Ant to Rx Figure 3-1. Electrical Characteristics These data exclude loss that comes from the test board. Apr.13. 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Tx to Ant, Ant to Rx Tx to Rx Isolation Figure 3-2. Electrical Characteristics These data exclude loss that comes from the test board. Apr.13. 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Tx Port Figure 3-3. Electrical Characteristics Apr.13. 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Rx Port Figure 3-4. Electrical Characteristics Apr.13. 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Ant Port Figure 3-5. Electrical Characteristics Apr.13. 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Tx to Ant (Wide Span) Ant to Rx (Wide Span) Figure 3-6. Electrical Characteristics Apr.13. 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 17 Duplexer Date Part Number D5DA740M0K2L4 Version 1.1aaA Apr.13. 2016 Final Ordering Code Ordering Code Packing Reel size Status D5DA740M0K2L4-Z Tape & Reel 3,000 pcs. MP D5DA740M0K2L4-ZA Tape & Reel less than 3,000 pcs. MP D5DA740M0K2L4-Y Tape & Reel 15,000 pcs. MP D5DA740M0K2L4-YA Tape & Reel less than 15,000 pcs. MP D5DA740M0K2L4-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives. *MP : Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact Taiyo Yuden in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.