EPCOS B82496C3109X000 Smt inductor Datasheet

SMT inductors
SIMID series, SIMID 0603-C
Series/Type:
B82496C
Date:
October 2008
%BUB4IFFU
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
B82496C
SIMID 0603-C
Size 0603 (EIA) and/or 1608 (IEC)
Rated inductance 1 nH to 220 nH
Rated current 110 mA to 1800 mA
Construction
■ Copper-plated ceramic core
■ Laser-cut winding, epoxy-coated
Features
Temperature range up to 150 °C
High resonance frequency
Close inductance tolerance
Free of polarization effect
High mechanical stability
Qualified to AEC-Q200
Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020C
■ RoHS-compatible
■
■
■
■
■
■
■
Applications
Resonant circuits, impedance matching for
Multimedia
Car access systems
Wireless communication systems
TPMS (Tire Pressure Monitoring System)
GPS (Global Positioning System)
Digital cameras
■
■
■
■
■
■
Terminals
■ Base material Al2O3 ceramic with Cu layer
■ Layer composition Ni, Sn (lead-free)
■ Electro-plated
Marking
■ No marking on component
■ Minimum data on reel:
Manufacturer, ordering code, L value,
quantity, date of packing
Delivery mode and packing unit
■ 8-mm cardboard tape, wound on 180-mm ∅ reel
■ Bulk case on request
■ Packing unit: 4000 pcs./reel
Please read Cautions and warnings and
Important notes at the end of this document.
2
10/08
SMT inductors, SIMID series
B82496C
SIMID 0603-C
0.3±0.2
A
0.8±0.1
Dimensional drawing and layout recommendation
0.3±0.2
C
0.8±0.1
1.6±0.1
B
IND0042-K
IND0041-C
Dimensions in mm
A
B
C
0.8 ±0.1
2.3 ±0.3
0.9 ±0.1
Taping and packing
2±0.05
1.9±0.1
0.95±0.05
<_ 1.15
1.1±0.1
8±0.2
4±0.1
_0
1.5 +0.1
3.5±0.05
Reel
1.75±0.1
Cardboard tape
4±0.1
Direction of unreeling
IND0553-H-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
10/08
SMT inductors, SIMID series
B82496C
SIMID 0603-C
Technical data and measuring conditions
Rated inductance LR
Measured with impedance analyzer Agilent 4291A
and test fixture Agilent 16196A at frequency fL, 0.1 V,
20 °C
Q factor Qmin, Qtyp
Measured with impedance analyzer Agilent 4291A
and test fixture Agilent 16196A,
Qmin measured at frequency fQ, 20 °C
Rated temperature TR
125 °C
Rated current IR
Maximum permissible DC with a temperature increase
of ≤ 15 K at rated temperature
Self-resonance frequency fres,min
Measured with network analyzer Agilent 8720D, 20 °C
DC resistance Rmax
Measured at 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 95%
(based on IEC 60068-2-58)
Resistance to soldering heat
260 °C, 40 s (as referenced in JEDEC J-STD 020C)
Climatic category
55/150/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +150 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 4 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
10/08
SMT inductors, SIMID series
B82496C
SIMID 0603-C
Characteristics and ordering codes
Ordering code1)2)
(reel packing)
Qtyp
(at
800 MHz)
fL; fQ
IR
Rmax
fres,min
MHz
mA
Ω
GHz
7
60
100
1800
0.02
16
B82496C3109+000
8
60
100
1800
0.025
15
B82496C3129+000
1.5
8
50
100
1500
0.03
13
B82496C3159+000
1.8
12
50
100
1500
0.033
12
B82496C3189+000
2.2
14
50
100
1500
0.035
10
B82496C3229+000
2.7
14
40
100
1400
0.04
10
B82496C3279+000
3.3
14
40
100
1200
0.06
9
B82496C3339+000
14
40
100
1100
0.065
8
B82496C3399+000
14
40
100
800
0.10
7
B82496C3479+000
5.6
14
40
100
700
0.15
6
B82496C3569+000
6.8
14
40
100
700
0.15
6
B82496C3689+000
8.2
14
40
100
650
0.18
6
B82496C3829+000
14
40
100
600
0.20
5
B82496C3100+000
14
40
100
450
0.35
5
B82496C3120+000
15
14
40
100
420
0.40
4.5
B82496C3150+000
18
14
40
100
400
0.45
4.0
B82496C3180+000
22
14
40
100
380
0.50
4.0
B82496C3220+000
27
14
35
100
360
0.55
3.0
B82496C3270+000
33
14
35
100
350
0.60
3.0
B82496C3330+000
39
14
35
100
300
0.80
2.5
B82496C3390+000
47
14
35
100
270
0.95
2.5
B82496C3470+000
56
14
35
100
250
1.2
2.5
B82496C3560+000
68
14
35
100
230
1.3
2.0
B82496C3680+000
82
14
35
100
220
1.5
2.0
B82496C3820+000
100
14
30
100
200
1.8
1.8
B82496C3101+000
120
5
30
25.2
160
3.0
1.8
B82496C3121+000
150
5
30
25.2
130
5.0
1.6
B82496C3151+000
180
4
25
25.2
120
6.0
1.4
B82496C3181+000
220
4
25
25.2
110
7.0
1.3
B82496C3221+000
LR
Tolerance
Qmin
nH
1.0
1.2
3.9
4.7
10
12
±0.3 nH
±0.2 nH
^
^
A
Z
±5% ^ J
±0.2 nH ^ Z
±5%
±2%
^
^
J
G
Special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available (see also chapter “Sample kits”. Ordering code: B82496X001
1) Replace the + by the code letter for the required inductance tolerance.
2) For bulk case the last digit has to be a »1«. Example: B82496C3109A001
Please read Cautions and warnings and
Important notes at the end of this document.
5
10/08
SMT inductors, SIMID series
B82496C
SIMID 0603-C
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4291A/16196A, typical values at 20 °C
IND0043-T
10 5
Ω
| Z | 10
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4275A,
typical values at 20 °C
10
nH
B82496C
_6
IND0045-5
B82496C
4
220 nH
L
10 3
10
_7
100 nH
_8
10 nH
_9
1 nH
10 2
10 1
10
10 0
10
10
10
220 nH
100 nH
10 nH
1 nH
_1
_2
10
_3
10
6
10
7
10
8
Hz 10
f
10
9
IND0044-2
B82496C
Iop
IR
1 nH
80
_2
10
_1
10 0
A 10 1
I DC
IND0046-L-E
1.2
90
Q
10
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 125 °C)
Q factor versus frequency f
measured with impedance analyzer
Agilent 4291A/16196A, typical values at 20 °C
100
_ 10
70
B82496C
1.0
0.8
60
10 nH
0.6
50
40
0.4
30
20
0.2
10
220 nH
0 7
10
10 8
10 9
100 nH
0
Hz 10 10
f
6
0
10/08
20
40
60
80 100 120
C 160
TA
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
7
10/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
8
03/09
Similar pages