CREE CLVBA-FKA-CA1D181BB7D3D3 Cree plcc4 3-in-1 smd led Datasheet

CLD-CT1165.008
PRODUCT FAMILY DATA SHEET
Cree® PLCC4 3-in-1 SMD LED
CLVBA-FKA
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
These SMD LEDs are packaged in an
• Size (mm):3.2 x 2.8
• Full-Color Video Screen
industry standard PLCC4 package.
• Dominant Wavelength:
Red (619 - 624nm)
Green (520 - 540nm)
Blue (460 - 480nm)
• Decorative lighting
These high reliability and high
brightness LEDs are designed to work
in a wide range of environmental
conditions. A wide viewing angle
and high brightness makes these
LEDs suitable for indoor signage
applications.
• Amusement
• Luminous Intensity (mcd)
@IF=20mA
Red (224 - 560)
Green (280 - 900)
Blue (90 - 355)
• Lead-Free
WWW.CREE.COM/HB
• RoHS Compliant
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo are registered trademarks of Cree, Inc.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
R
G
B
IF
50
25
25
mA
IFP
200
100
100
mA
Reverse Voltage
VR
5
5
5
V
Power Dissipation
PD
130
100
100
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
110
110
°C
Junction/ambient 1 chip on
RTHJA
450
400
450
°C/W
Junction/ambient 3 chips on
RTHJA
650
580
680
°C/W
Junction/solder point 1 chip on
RTHJS
300
280
300
°C/W
Junction/solder point 3 chips on
RTHJS
450
430
480
°C/W
Forward Current
Note 1
Peak Forward Current
Note 2
Note: 1.Single-color light.
2.Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Characteristics
Condition
Symbol
Dominant Wavelength
IF = 20 mA
λDOM
Spectral bandwidth at 50% IREL max
IF = 20 mA
Forward Voltage
Luminous Intensity
Luminous Intensity
Reverse Current (max)
IF = 8 mA
IF = 20 mA
IF = 8 mA
VR = 5 V
Values
Unit
R
G
B
619~624
520~540
460~480
nm
Δλ
24
38
28
nm
VF(avg)
1.9
3.0
3.0
V
VF(max)
2.4
3.6
3.6
V
IV(min)
224
280
90
mcd
IV(avg)
320
500
160
mcd
IV(min)
71
140
36
mcd
IV(avg)
112
224
56
mcd
IR
10
10
10
μA
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
2
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
INTENSITY BIN LIMIT (IF = 8 mA)
Red Bin Code
Min.(mcd)
Green
Max.(mcd)
Bin Code
Blue
Min.(mcd)
Max.(mcd)
Bin Code
Min.(mcd)
Max.(mcd)
A
71
90
D
140
180
L8
36
45
3a4
81
101
9a
160
202
3g3f
41
51
B
90
112
E
180
224
L9
45
56
56
101
126
bc
202
252
3e3d
51
64
C
112
140
F
224
280
L
56
71
78
126
160
de
252
318
3c3b
64
81
D
140
180
G
280
355
A
71
90
9a
160
202
fg
318
403
3a4
81
101
E
180
224
H
355
450
B
90
112
Tolerance of measurement of luminous intensity is ±10%.
COLOR BIN LIMIT (IF = 8 mA)
Red Green Bin Code
Min.(nm)
Max.(nm)
RB
619
624
Bin Code
Min.(nm)
Blue Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
G7
520
525
B3
460
465
G23
522.5
527.5
B23
462.5
467.5
G8
525
530
B4
465
470
G45
527.5
532.5
B45
467.5
472.5
G9
530
535
B5
470
475
G67
532.5
537.5
B67
472.5
477.5
Ga
535
540
B6
475
480
Tolerance of measurement of dominant wavelength is ±1 nm.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
3
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
ORDER CODE TABLE*
Luminous Intensity (mcd)
Kit Number
Color
CLVBA-FKA-CAEDH8BBB7a363
Blue
CLVBA-FKA-CA1D181BB7D3D3
CLVBA-FKA-CC1F1L1BB7D3D3
Dominant Wavelength (nm)
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
Package
RB
619
RB
624
Reel
Min.
Max.
Red
71
224
Green
140
450
Any 1 hue bin from G7(520) - Ga(540)
Reel
36
112
Any 1 hue bin from B3(460) - B6(480)
Reel
Red
Any 1 Intensity bin from A(71) - E(224)
Green
Any 1 Intensity bin from D(140) - H(450)
Any 1 hue bin from G7(520) - Ga(540)
RB
Reel
Blue
Any 1 Intensity bin from L8(36) - B(112)
Any 1 hue bin from B3(460) - B6(480)
Reel
Red
Any 1 Intensity bin from C(112) - E(224)
Green
Any 1 Intensity bin from F(224) - H(450)
Any 1 hue bin from G7(520) - Ga(540)
Reel
Blue
Any 1 Intensity bin from L(56) - B(112)
Any 1 hue bin from B3(460) - B6(480)
Reel
RB
619
619
RB
RB
624
624
Reel
Reel
Notes:
1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes.Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single colorbin code will be orderable in certain quantities.
2. For example, any 1 intensity-bin from A - E means only 1 intensity-bin (A or 3a4 or B or 56 or C or 78 or D or 9a or
E) will be shipped by Cree.
3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G23 or G8 or G45 or G9 or G67 or Ga) will
be shipped by Cree.
4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
4
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
5
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
6
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
MECHANICAL DIMENSIONS
All dimensions are in mm.
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
7
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
KIT NUMBER SYSTEM
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and
brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp
Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
8
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
REFLOW SOLDERING
•
•
•
•
The CLVBA-FKA is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs.
The best practices suggestion is to bake 24-hour/80ºC before use.
The temperature profile is as below.
Document No.: COTCO-05-0057
Rev. NO. : 13
Temperature
Melting-point
Pre-heat
Soak
Reflow
Cooling
Time
Use all SMD besides LP6-NPP1-01-N1
Use only with CLVBA-FKA
Soldering
pad:
Solder = Sn63-Pb37
Solder
= Lead-free
Preheat temperature = 150ºC ~200ºC
Preheat
100s
Preheat
time = time
120s =
max
Preheat time = 100s max.
max.
Ramp-down
rate = 6ºC/s
Ramp-down
rate =max
6ºC/s
max.
Peak temperature
= 235ºC=max
Peak temperature
230ºC
Ramp-down rate = 6ºC/s max.
max.
Peak temperature = 250ºC max.
Time within 5ºC of actual Peak Temperature = 10s max
Time within 5ºC of actual Peak Temperature = 10s max.
Duration above 217ºC is 45s max
Duration above 183ºC is 80s max.
Only use LP6-NPP1-01-N1



Preheat
temperature
100ºC ~150ºC
Preheat
temperature
= 150ºC=~200ºC

Average ramp-up rate = 4ºC/s max
Average ramp-up rate = 4ºC/s max

Solder
Average ramp-up rate = 4ºC/s max.
Time within 5ºC of actual Peak Temperature = 10s max.
Duration above 217ºC is 80s max.
[13]
Solder = Low Lead-free
Average ramp-up rate = 3ºC/s max.
Preheat temperature = 130ºC ~170ºC
Preheat time = 120s max.
Ramp-down rate = 6ºC/s max.
Peak temperature = 213ºC max.
Time within 3ºC of actual Peak Temperature = 25s max.
Duration above 200ºC is 40s max.
Recommended solder pad design for heat dissipation (2-pin SMD LED):
7.0
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
2.6
9
Cree PLCC4 3 in 1 SMD LED
CLVBA-FKA
PACKAGING
•
•
•
•
•
The boxes are not water resistant and they must be kept away from water and moisture.
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
The reel pack is applied in SMD LED.
Max 2000 pcs per reel.
H UMIC HECK
w ww .vit ap ac .c om
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
10
Similar pages