DYELEC EDB304S Single phase 3 . 0 amp surface mount glass passivated bridge rectifier Datasheet

EDB 301S THRU EDB305S
SINGLE PHASE 3.0 AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
Glass passivated die construction
Low forward voltage drop
High current capability
High surge current capability
Designed for surface mount application
Plastic material-UL flammability 94V-0
DB-S
0.311(7.9)
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
0.378(9.6)
0.0059(0.15)
· Case: DB-S, molded plastic
· Terminals: plated leads solderable per
~
0.402(10.2)
0.0098 (0.25)
~
Mechanical Data
0.291(7.4)
0.240(6.1)
+
-
0.256(6.5)
0.043(1.1)
0.035(0.9 )
MAX 0.0079 (0.2)
·
·
·
·
·
·
0.329(8.35 )
0.313( 7.95)
0.098(2.50 )
0.083(2.10)
0.205(5.2)
0.197(5.0)
· Lead Free: For RoHS / Lead Free Version
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL EDB301S EDB302S EDB303S EDB304S EDB305S UNITS
VRRM
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRWM
RMS Reverse Voltage
VRMS
50
100
200
400
600
V
35
70
140
280
420
V
VDC
IO
3.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
IFSM
80
A
Forward Voltage per element
VFM
Average Rectified Output Current (Note 1)@TA=40℃
@IF=3.0A
1.25
1.7
V
IR
5.0
500
uA
TRR
35
ns
CJ
13
pF
RθJA
70
RθJL
20
TJ,TSTG
-55to+150
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Maximum reverse recovery time (Note 3)
Typical Junction Capacitance per leg (Note 2)
Typical Thermal Resistance per leg
Operating and Storage Temperature Range
0.95
℃/W
℃
2
Note:1. Mounted on glass epoxy PC board with 1.3mm solder pad.
2.Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com
EDB 301S THRU EDB305S
Fig. 2 Typical Forward Characteristics (per leg)
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A)
Fig. 1 Output Current Derating Curve
3.0
2.0
1.0
0
Resistive or Inductive Load
0
40
80
120
10
EDB304S
EDB301S-EDB303S
0.1
TA= 25°C
Pulse Width = 300µs
0.01
0.3
160
0
TA = 25°C
Single Half Sine-Wave
Pulse Width =8.3ms
(JEDEC Method)
1.0
10
NUMBER OF CYCLES AT 60 Hz
version:01
0.9
1.2
1.5
1.8
2.1
Fig. 4 Typical Reverse Characteristics (per element)
IR, INSTANTANEOUS REVERSE CURRENT (µA)
IFSM, PEAK FORWARD SURGE CURRENT (A)
Fig. 3 Maximum Peak Forward Surge Current (per leg)
40
0.69
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
TA, AMBIENT TEMPERATURE (°C)
80
EDB305S
1.0
1000
TJ = 125°C
100
10
TJ = 25°C
1
0.1
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
2 of 2
www.dyelec.com
Similar pages