BYV32-xxx, BYVF32-xxx, BYVB32-xxx www.vishay.com Vishay General Semiconductor Dual Common-Cathode Ultrafast Rectifier FEATURES TO-220AB ITO-220AB • Power pack • Glass passivated pellet chip junction • Ultrafast recovery time • Low switching losses, high efficiency • Low forward voltage drop 2 3 1 2 • High forward surge capability 3 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) 1 BYV32 Series BYVF32 Series PIN 1 PIN 2 PIN 3 CASE PIN 1 PIN 2 • Solder dip 275 °C max. 10 s, per JESD 22-B106 (for TO-220AB and ITO-220AB package) PIN 3 TO-263AB K • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 2 TYPICAL APPLICATIONS 1 BYVB32 Series PIN 1 PIN 2 For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. K HEATSINK MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 18 A VRRM 50 V to 200 V IFSM 150 A trr 25 ns VF 0.85 V TJ max. 150 °C Package TO-220AB, ITO-220AB, TO-263AB Diode variations Common cathode Case: TO-220AB, ITO-220AB, TO-263AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs max. MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BYV32-50 BYV32-100 BYV32-150 BYV32-200 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current at TC = 125 °C IF(AV) 18 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 150 A TJ, TSTG -65 to +150 °C VAC 1500 V Operating storage and temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min Revision: 23-Feb-16 Document Number: 88558 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYV32-xxx, BYVF32-xxx, BYVB32-xxx www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode IF = 20 A F = 5.0 A Maximum DC reverse current per diode at rated DC blocking voltage SYMBOL BYV32-50 BYV32-100 BYV32-150 BYV32-200 UNIT TJ = 25 °C 1.15 VF (1) TJ = 100 °C TJ = 25 °C V 0.85 10 IR TJ = 100 °C μA 600 Maximum reverse recovery time per diode IF = 1 A, VR = 30 V dI/dt = 100 A/μs, Irr = 10 % IRM trr 25 ns Typical junction capacitance per diode 4.0 V, 1 MHz CJ 45 pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BYV BYVF BYVB UNIT RJC 1.6 5.0 1.6 °C/W Typical thermal resistance from junction to case per diode ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB BYV32-200-E3/45 1.85 45 50/tube Tube ITO-220AB BYVF32-200-E3/45 1.97 45 50/tube Tube TO-263AB BYVB32-200-E3/45 1.35 45 50/tube Tube TO-263AB BYVB32-200-E3/81 1.35 81 800/reel Tape and reel TO-220AB BYV32-200HE3/45 (1) 1.85 45 50/tube Tube ITO-220AB BYVF32-200HE3/45 (1) 1.97 45 50/tube Tube TO-263AB BYVB32-200HE3/45 (1) 1.35 45 50/tube Tube TO-263AB BYVB32-200HE3/81 (1) 1.35 81 800/reel Tape and reel Note (1) AEC-Q101 qualified Revision: 23-Feb-16 Document Number: 88558 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYV32-xxx, BYVF32-xxx, BYVB32-xxx www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 18 Instantaneous Reverse Leakage Current (μA) Average Forward Rectified Current (A) 20 16 12 8 4 Resistive or Inductive Load 0 TC = 100 °C 10 1 TC = 25 °C 0.1 0 25 50 75 100 125 150 0 20 40 60 80 100 Case Ambient Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics Per Diode 150 60 TJ = 150 °C 10 ms Single Half Sine-Wave 125 Junction Capacitance (pF) Peak Forward Surge Current (A) 100 100 75 50 25 0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 50 40 30 20 10 0 1 100 10 Number of Cycles at 50 Hz 1 10 100 Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Fig. 5 - Typical Junction Capacitance Per Diode Instantaneous Forward Current (A) 100 TJ = 125 °C 10 TJ = 25 °C 1 0.1 Pulse Width = 300 μs 1 % Duty Cycle 0.01 0.1 0.3 0.5 0.7 0.9 1.1 1.3 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Revision: 23-Feb-16 Document Number: 88558 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYV32-xxx, BYVF32-xxx, BYVB32-xxx www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.104 (2.65) 0.096 (2.45) 0.671 (17.04) 0.651 (16.54) PIN 1 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 3 0.245 (6.22) MIN. 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) TO-263AB Mounting Pad Layout 0.42 (10.66) MIN. 0.055 (1.40) 0.045 (1.14) 0.33 (8.38) MIN. 0.360 (9.14) 0.320 (8.13) K 2 0.624 (15.85) 0.591 (15.00) 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) K 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.022 (0.56) 0.014 (0.36) 0.190 (4.83) 0.160 (4.06) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.411 (10.45) 0.380 (9.65) 7° REF. 7° REF. 0.560 (14.22) 0.530 (13.46) 0.205 (5.20) 0.195 (4.95) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.603 (15.32) 0.573 (14.55) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.145 (3.68) 0.135 (3.43) 7° REF. 0.076 (1.93) REF. 45° REF. 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Revision: 23-Feb-16 Document Number: 88558 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000