MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GVD Vibration resistant structure, 135℃ Series 2 ・Structure of higher vibration resistance by GPD series (acceleration 392m/s , 40G) ・Guaranteed short time at 150℃ ・Designed for electric power steering and ECU (include engine control, GPD direct fuel injection) etc. P219 ・Rated voltage range : 25 to 100V, Capacitance range : 510 to 8,200μF ・Solvent resistant type ・RoHS Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Vibration resistance GVD ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life Vibration -40 to +135℃ 25 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 25 to 100Vdc：3,000hours 135℃ 25 to 50Vdc：3,000hours 63 to 100Vdc：2,000hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 25 to 100Vdc：2,500hours 135℃ 25 to 50Vdc：2,500hours 63 to 100Vdc：1,500hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to vibration test (vibration profile shown below) at room temperature (15 to 35℃). Capacitance change ≦±5％ of the initial value D.F. (tanδ) ≦The initial specified value Leakage current ≦The initial specified value Vibration profile Vibration frequency range Amplitude or Acceleration Sweep rate Direction and period of motion Fixation 10 to 2,000Hz 1.5mm peak to peak or 392m/s2(40G), whichever is the less severe 10 to 2,000 to 10Hz 0.5 octave/minute 2 hours in each of 3 mutually perpendicular directions (total of 6hours) Fix main body and Lead teminal using a fixture tool, please contact us for detail. ◆DIMENSIONS [mm] F±0.5 Code : E φ D' Coated Case φd ●Terminal Vent L' 15min. 4min. Gas escape end seal * Please contact us about lead formings and mounting methods. φD φd F φD' L' 18 0.8 7.5 φD+0.5max. L+1.5max. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 222 CAT. No. E1001Q MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Vibration resistant structure, 135℃ GVDSeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15 16 17 18 E GVD AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680µF:681, 8,200µF:822) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" ◆STANDARD RATINGS Cap (µF) WV (Vdc) 6,200 8,200 3,600 4,700 2,000 2,400 1,300 1,800 820 1,200 510 680 25 35 50 63 80 100 ESR (Ωmax/100kHz) Case size φD×L(mm) 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 20℃ 0.023 0.019 0.023 0.019 0.029 0.024 0.029 0.024 0.029 0.024 0.038 0.030 Rated ripple current (mArms/100kHz) -40℃ 125℃ 135℃ 0.19 0.13 0.19 0.13 0.26 0.20 0.18 0.14 0.18 0.14 0.25 0.19 5,380 6,110 5,380 6,110 5,050 5,760 3,930 4,920 3,930 4,920 3,800 4,550 3,330 3,750 3,330 3,750 2,910 3,330 3,100 3,520 3,100 3,520 2,830 3,210 Part No. EGVD250E□□622MM30H EGVD250E□□822MMP1H EGVD350E□□362MM30H EGVD350E□□472MMP1H EGVD500E□□202MM30H EGVD500E□□242MMP1H EGVD630E□□132MM30H EGVD630E□□182MMP1H EGVD800E□□821MM30H EGVD800E□□122MMP1H EGVD101E□□511MM30H EGVD101E□□681MMP1H □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 510 680 to 2,000 2,400 to 3,600 4,700 to 8,200 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 223 CAT. No. E1001Q