XP Power AFE220PS19 Energy efficiency level v Datasheet

ACDC
220 Watts
AFE220 Series
xppower.com
•
Energy Efficiency Level V
•
CEC2008, EISA2007 & ErP Compliant
•
High Power Density
•
Single Outputs from 12 V to 48 V
•
High Efficiency
•
Low Earth Leakage Current
•
3 Year Warranty
Specification
Input
General
• 90-264 VAC
• 47-63 Hz
• 2.1 A rms at 115 VAC,
1.1 A rms at 230 VAC
Inrush Current
• 110 A typical at 115 VAC,
cold start +25 °C
Power Factor
• 0.95 typical at full load, 230 VAC
Earth Leakage Current • 400 µA max at 264 VAC, 60 Hz
Input Protection
• Internal T4 A/250 V fuse
Standby Power
• <0.5 W
Consumption
Input Voltage
Input Frequency
Input Current
Switching Frequency
Power Density
MTBF
• See table
• Level V
• 3000 VAC Input to Output
1500 VAC Input to Ground
Output return is electrically connected to
Input Earth
• PFC: 40 kHz typical
PWM: 120-160 kHz
• 5.0 W/In3
• >100 kHrs to MIL-HDBK-217F
at 25 °C, GB
Environmental
Output
See table
Not user-adjustable
±2% maximum at 100% load
No minimum load required
3 s maximum at 100 VAC
5 ms minimum at 100 VAC
±0.5% maximum
See table
4% max. deviation, recovery to within
1% in 500 µs for a 25% load change
Ripple & Noise
• 2% max pk-pk (see note 1)
Overvoltage Protection • 110-140% Vnom, recycle input to reset
Overtemperature
• Unit shuts down, auto recovery
Protection
Overload Protection
• 110-150%, auto recovery
Short Circuit Protection • Trip and restart (Hiccup mode)
Temperature
• 0.04%/°C maximum
Coefficient
Output Voltage
Output Voltage Trim
Initial Set Accuracy
Minimum Load
Start Up Delay
Hold Up Time
Line Regulation
Load Regulation
Transient Response
Efficiency
Energy Efficiency
Isolation
•
•
•
•
•
•
•
•
•
Operating Temperature • 0 °C to 60 °C, derate from 100% power at
40 °C to 50% power at 60 °C
Operating Humidity
• 10-95% RH, non-condensing
Storage Temperature • -20 °C to +80 °C
Operating Altitude
• 3000 m
Shock
• 30 g, 10 ms on 3 axes
Vibration
• 5-100 Hz, 2.31 m/s2, 20 mins, 3 axes
EMC & Safety
Emissions
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Field
Dips & Interruptions
Safety Approvals
• EN55022, Class B conducted
EN55022, Class B radiated
• EN61000-3-2, Class A
• EN61000-3-3
• EN61000-4-2, ±8 kV contact,
±15 kV air discharge Perf Criteria A
• EN61000-4-3, 3 V/m Perf Criteria A
• EN61000-4-4, level 3 Perf Criteria A
• EN61000-4-5, installation class 3
Perf Criteria A
• EN61000-4-6, 3 Vrms Perf Criteria A
• EN61000-4-8, 1 A/m Perf Criteria A
• EN55024, 100% for 10 ms,
30% 500 ms, 100% 5000 ms,
Perf Criteria A, A, B High line,
A,B,B Low line
• EN60950-1, UL60950-1,
CSA22.2 No. 60950-1 per cUL, CE Mark
Output Power
180
220
220
220
Output Voltage
W
W
W
W
12
19
24
48
V
V
V
V
Output Current
Total Regulation(2)
Efficiency(4)
15.00 A
11.57 A
9.16 A
4.58 A
5%
5%
5%
5%
90%
91%
91%
93%
Model Number
AFE220PS12 (3)
AFE220PS19
AFE220PS24
AFE220PS48
Notes
1.
2.
3.
4.
Ripple and noise measured at 20 MHz bandwidth with a 47 µF tantalum and 0.1 µF ceramic cap connected at the measurement point.
Total regulation includes initial set accuracy, line and load regulation.
For optional IEC320-C6 input connector, add suffix ‘ C6’ to end of part number (Available on 12 V model only).
Average of efficiencies measured at 25%, 50%, 75% and 100% load and 230 VAC input.
Mechanical Details
Mains Leads Order Part:
UK - C14 inlet: UK-MAINS-IEC, C6 inlet: UK-MAINS-5
European - C14 inlet: EU-MAINS-IEC, C6 inlet: EU-MAINS-5
US - C14 inlet: US-MAINS-IEC, C6 inlet: US-MAINS-5
6
5
4
3
2
1
AFE220PS19/24/48
1 3
1.73
AFE220PS12
4
2
Power On Indicator
(44.0)
Pin Connector
AFE220PS12
7.76 (197)
Rubber foot
(4 places.)
Pin
1
2
3
4
Shell
Function
Output +
Output +
Return/Input Earth
Return/Input Earth
Return/Input Earth
AFE220PS19/24/48
Pin
1
2
3
4
5
6
Function
Return/Input Earth
Return/Input Earth
Return/Input Earth
Output +
Output +
Output +
3.46 (88.0)
0.02
(0.5)
Cable Length
Optional
IEC 320/C6 Inlet
(12 V model only)
AC Input
IEC 320/C14 Inlet
PS12
PS19
PS24
PS48
-
37.4”
37.4”
70.9”
70.9”
±
±
±
±
1.97”
1.97”
1.97”
1.97”
(950 ± 50mm)
(950 ± 50mm)
(1800 ± 50mm)
(1800 ± 50mm)
Notes
1. Dimensions shown in inches (mm). Tolerance is 0.02 (0.5) maximum, except output cable length.
2. Weight: 2.31 lb (1050 g).
3. Optional output connectors available. Consult sales.
4. Output connector for AFE220PS12 is non locking 4 pin DC power plug and mates with Kycon KPJX-4S or equivalent.
Output connector for AFE220PS19/24/48 is molex Mini-Fit part number 39-01-2060 with 5556 terminals and mates with molex plug
39-01-2066 and 5558 terminals or equivalent.
5. Mains lead length is 76” (1930 mm) approx
05-Aug-13
ACDC
AFE220
Models and Ratings
Similar pages