TECHNICAL DATA SHEET COAX CTF100 Code version date page CTF100 1 2008-04-09 1/2 APPLICATION Coaxial cables used in cabled distribution networks designed according the European Standard EN 50117-2-1 and En 50117-2-4 operating at frequencies between 5 MHz and 3000 MHz. CONSTRUCTION 1 2 3.1 3.2 4 1 2 3.1 3.2 4 Solid soft annealed copper Gas injected LDPE Copper-polyester foil Annealed copper PVC according the European Standard HD 624. Inner conductor Dielectric Foil Braid Sheath REQUIREMENTS AND TEST METHODS Test methods in accordance with European standard EN 50117-1. Mechanical characteristics 1. Inner conductor. Diameter: 2. Dielectric: Diameter: Adhesion: 3. Outer conductor: Diameter screen: Coverage braid: 4. Sheath: Diameter: Tensile strength: Elongation at break: 5. Cable: Storage/operation temperature: Minimum installation temperature: Minimum static bend radius: 0.96 mm ± 0.02 mm 4.7 mm ± 0.15 mm 7.5 – 75 N at 25 mm 5.35 mm ± 0.15 mm 55 % ± 5 % 6.65 mm ± 0.2 mm ≥ 12.5 N/mm2 ≥ 150 % -40°C to +70°C -5 °C 35 mm Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET COAX CTF100 Code version date page CTF100 1 2008-04-09 2/2 Electrical characteristics Mean characteristic impedance: Regularity of impedance: DC loop resistance: DC resistance inner conductor: DC resistance outer conductor: Capacitance: Velocity ratio: Insulation resistance: Voltage test of dielectric: Screening efficiency after flexing 30-1000 MHz: 1000 – 2000 MHz: 2000 – 3000 MHz: Return loss at 5-30 MHz: 30-470 MHz: 470-1000 MHz: 1000-2000 MHz: 2000-3000 MHz: 75 ± 3 Ω >40dB or <1% ≤ 41 Ohm/km ≤ 26 Ohm/km ≤ 15 Ohm/km 55.0 pF/m ± 2.0 pF/m 0.82 ± 0.02 > 104 MOhm.km 2 kVdc ≥ 75 dB ≥ 65 dB ≥ 55 dB ≥ 20 dB* ≥ 20 dB* ≥ 18 dB* ≥ 16 dB* ≥ 15 dB* *Max. 3 peak values 4 dB lower than specified. Attenuation at 5 MHz: 50 MHz: 100 MHz: 200 MHz: 460 MHz: 800 MHz: Maximal 1.6 dB/100m 4.6 dB/100m 6.5 dB/100m 9.5 dB/100m 15.0 dB/100m 18.8 dB/100m Attenuation at 860 MHz: 1000 MHz: 1750 MHz: 2150 MHz: 2400 MHz: 3000 MHz: REVISIONS # Description Maximal 19.5 dB/100m 21.5 dB/100m 29.0 dB/100m 32.5 dB/100m 34.4 dB/100m 38.4 dB/100m Date Initials Belden CDT believes this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product. Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner