EPCOS B72225T4151K101 Siov metal oxide varistors housed (thermofuse) varistors, advanced sery Datasheet

SIOV metal oxide varistors
Housed (ThermoFuse) varistors, AdvanceD series
Series/Type:
ETFV25
Date:
February 2010
© EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
Construction
Round varistor element, leaded
Coating: epoxy resin, flame-retardant to UL 94 V-0
Terminals: tinned copper wire, metal compound wire
Housing: thermoplastic, flame-retardant to UL 94 V-0
Features
Wide operating voltage range 115 … 420 VRMS
Self-protected under abnormal overvoltage conditions
Very high surge current ratings of 20 kA
Approvals
UL
Applications
Air conditioner, refrigerator, TV, etc.
Power meter, inverter, telecom equipment, etc.
Transient voltage surge suppressors (TVSS)
Delivery mode
Bulk (standard)
Typical applications
General technical data
Climatic category
Operating temperature
Storage temperature
Electric strength
Response time
Please read Cautions and warnings and
Important notes at the end of this document.
to IEC 60068-1
to CECC 42 000
to CECC 42 000
Page 2 of 10
40/85/56
40 ... + 85
40 ... +125
≥ 2.5
< 25
°C
°C
kVRMS
ns
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
Electrical specifications and ordering codes
Maximum ratings (TA = 85 °C)
Ordering code
B72225T4111K101
B72225T4131K101
B72225T4141K101
B72225T4151K101
B72225T4171K101
B72225T4211K101
B72225T4231K101
B72225T4251K101
B72225T4271K101
B72225T4301K101
B72225T4321K101
B72225T4351K101
B72225T4381K101
B72225T4421K101
Type
(untaped)
SIOVETFV25K115E4
ETFV25K130E4
ETFV25K140E4
ETFV25K150E4
ETFV25K175E4
ETFV25K210E4
ETFV25K230E4
ETFV25K250E4
ETFV25K275E4
ETFV25K300E4
ETFV25K320E4
ETFV25K350E4
ETFV25K385E4
ETFV25K420E4
VRMS
VDC
Wmax
(2 ms)
J
170
185
195
215
245
290
315
345
375
410
445
495
600
700
Pmax
V
150
170
180
200
225
270
300
320
350
385
420
460
505
560
imax
(8/20 µs)
A
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
V
115
130
140
150
175
210
230
250
275
300
320
350
385
420
Vv
(1 mA)
V
180
205
220
240
270
330
360
390
430
470
510
560
620
680
∆Vv
(1 mA)
%
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
vc,max
(ic)
V
300
340
360
395
455
545
595
650
710
775
840
910
1025
1120
ic
Ctyp
(1 kHz)
pF
2280
2010
1860
1740
1500
1245
1140
1050
945
870
810
750
675
630
W
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Characteristics (TA = 25 °C)
Ordering code
B72225T4111K101
B72225T4131K101
B72225T4141K101
B72225T4151K101
B72225T4171K101
B72225T4211K101
B72225T4231K101
B72225T4251K101
B72225T4271K101
B72225T4301K101
B72225T4321K101
B72225T4351K101
B72225T4381K101
B72225T4421K101
Type
(untaped)
SIOVETFV25K115E4
ETFV25K130E4
ETFV25K140E4
ETFV25K150E4
ETFV25K175E4
ETFV25K210E4
ETFV25K230E4
ETFV25K250E4
ETFV25K275E4
ETFV25K300E4
ETFV25K320E4
ETFV25K350E4
ETFV25K385E4
ETFV25K420E4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 10
A
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
Dimensional drawings
Weight
Nominal diameter
mm
25
Lead configuration
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 10
VRMS
V
115 ... 420
Weight
g
13.3 ... 16.3
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
Reliability data
Test
Test methods/conditions
Varistor voltage
The voltage between two terminals with To meet the specified value
the specified measuring current applied
is called VV (1 mADC @ 0.2 ... 2 s).
Clamping voltage
The maximum voltage between two
terminals with the specified standard
impulse current (8/20 µs) applied.
To meet the specified value
Surge current derating,
8/20 µs
CECC 42 000, test C 2.1
|∆V/V (1 mA)| ≤10%
(measured in direction of
surge current)
100 surge currents (8/20 µs), unipolar,
interval 30 s, amplitude corresponding
to derating curve for 100 impulses at
20 µs
Requirement
No visible damage
|∆V/V (1 mA)| ≤10%
(measured in direction of
100 surge currents (2 ms), unipolar,
interval 120 s, amplitude corresponding surge current)
to derating curve for 100 impulses at 2 No visible damage
ms
Surge current derating,
2 ms
CECC 42 000, test C 2.1
Abnormal overvoltage
test
UL1449, limited current abnormal
overvoltage test. Apply a high AC
voltage to ThermoFuse varistor, the
amplitude of overvoltage and current
limit will be adopted from UL1449
general instruction in section 37. The
specimen will be tested on a softwood
surface covered with a double layer of
white tissue paper. The specimen is to
be loosely draped with a double layer
of cheesecloth.
The cheesecloth shall cover openings
where flame, molten or other particles
may be expelled as a result of the test.
The test result will be visually
inspected.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 10
Any of these phenomena shall
not be observed, or this
specimen will be judged as
failed part.
1. Emission of flame, molten
metal, glowing or flaming
particles through any
openings (pre-existed or
created as a result of the
test) in the product.
2. Charring, glowing, or
flaming of the supporting
surface, tissue paper, or
cheesecloth.
3. Ignition of the enclosure.
4. Creation of any openings
in the enclosure that
result in accessibility of
live parts, when judged in
accordance with
accessibility of live parts,
UL1449 section 13.
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
v/i characteristics
v = f (i) for explanation of the characteristics refer to "General technical information", chapter 1.6.3
A = Leakage current, B = Protection level } for worst-case varistor tolerances
SIOV-ETFV25 ... E4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 10
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to "General technical information", section 1.8.1
SIOV-ETFV25 ... E4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 10
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
Cautions and warnings
General
1. EPCOS metal oxide varistors are designed for specific applications and should not be used
for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase.
2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs
should be evaluated taking into consideration worst-case conditions.
3. For applications of SIOVs in line-to-ground circuits based on various international and local
standards there are restrictions existing or additional safety measures required.
Storage
1. Store SIOVs only in original packaging. Do not open the package before storage.
2. Storage conditions in original packaging:
Storage temperature: 25 °C ... +45 °C,
Relative humidity:
<75% annual average,
<95% on maximum 30 days a year.
Dew precipitation:
Is to be avoided.
3. Avoid contamination of an SIOV's surface during storage, handling and processing.
4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term
operation (examples given under operation precautions).
5. The SIOV type series should be soldered within the time specified:
SIOV-S, -Q, -LS
24 months
ETFV and SFS types 12 months.
Handling
1. SIOVs must not be dropped.
2. Components must not be touched with bare hands. Gloves are recommended.
3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the
sharp edge of SIOV electrodes.
Soldering (where applicable)
1. Use rosin-type flux or non-activated flux.
2. Insufficient preheating may cause ceramic cracks.
3. Rapid cooling by dipping in solvent is not recommended.
4. Complete removal of flux is recommended.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 10
Housed varistors
ETFV25
ThermoFuse varistors, ETFV25 series
Mounting
1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic
that will degrade the component’s electrical characteristics.
2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this
reason SIOVs should be physically shielded from adjacent components.
Operation
1. Use SIOVs only within the specified temperature operating range.
2. Use SIOVs only within the specified voltage and current ranges.
3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric conditions. Avoid use in the presence of deoxidizing gases (chlorine gas, hydrogen sulfide gas,
ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions. Avoid contact with any liquids and solvents.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 10
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube,
PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 10 of 10
Similar pages