ETC2 BPSX2-08-33 Bias 2 watt power supply bpsx 2 sery Datasheet

BIAS 2 Watt Power Supply
BPSX 2 Series Data Sheet
Single (Vo) or Dual (Vo & Vr) output
BPSX 2-08-00, -08-33, -08-50
BPSX 2-14-00, -14-33, -14-50
BPSX 2-24-00
Actual Size
Features:
The BPSX is a revolutionary, micro-sized, drop-in switching power supply
module. It contains patented technology with unique features that
provide solutions for a wide range of applications, including low power
wireless and many other intelligent control devices. The patented SMPS
topology is totally different from any other:
It's Quiet: Switching is synchronized and occurs only 10% of the time, so
there is very little EMI / EMC interference with other circuits. This means no
extra filtering or shielding is needed, helping to achieve longer transmission
range with more reliable data communication in low power wireless
applications.
•
•
•
•
•
•
•
•
Extended Temperature with NO DE-RATING!
(-40 to +85°C )
Universal Input (85-265 VAC, 50/60Hz)
Small Size—0.87in3 [14.3cm3]
Low no-load input power <30mW
Constant power mode (not current limit)
3000 VAC Isolation
EN 55022, Class B; FCC Part 15, Class B
Meets UL/CSA and EN Product Safety (ITE)
It's Powerful: No power de-rating across the full wide temperature range. Bias Power AC/DC power supplies are available with two
No current limit design margin needed when selecting a module. Charge different types of outputs to fit your applications…
large super caps faster than any regular SMPS with twice the power rating.
It's Green: High efficiency with ultra low standby power and very little self
generated heat make it ideal for intelligent devices such as smart-sensors,
smart-meters, smart-lighting, smart-grid, M2M or IoT , and any other control
applications.
Operating Specifications
(@120VAC / 60 Hz / 25oC unless otherwise specified)
Electrical
Input Voltage Range
Input Surge Withstand
Output Power (Pmax)
Efficiency
Output Vo (Peak)
Line / Load Regulation Vo (Peak)
Temperature Regulation Vo (Peak)
Ripple Vo (@120 Hz)
(@ 100 kHz)
Output Vr, 3.3 volt (+/- 5%)
Output Vr, 5.0 volt (+/- 5%)
No-load Consumption
Isolation
Earth Leakage @ 120 VAC
Short Circuit Protection
Reliability @ 25° C, MIL HDBK-217F
Thermal
Operating Temperature
Operating Relative Humidity
Storage Temperature
Mechanical
Package Size
(L x W x H)
Safety
Safety Compliance
EMI Emissions
85 - 265 VAC (50/60Hz)
308V, < 30 sec
2.0 W (60Hz)
1.67 W (50Hz)
70% nom.
8, 14 or 24 VDC nom. +/- 5%
+/- 1% Po < Pmax
+/- 2% Po < Pmax
1.00 V p:p
0.25 V p:p
For Vo = 8V, Ir out 160mA max, Io+Ir ≤ 250mA*
For Vo = 14V, Ir out 70mA max, Io+Ir ≤ 143mA*
For Vo = 8V, Ir out 250mA max, Io+Ir ≤ 250mA*
For Vo = 14V, Ir out 83mA max, Io+Ir ≤ 143mA*
30 mW typical @ Vin=120 VAC
3000 VAC (meets UL / CSA & EN Product Safety)
< 10 uA
Continuous, Pin ≤ 0.6 w @ Vin = 120 VAC
> 500 Khr MTBF
The characteristics of the main (Vo) and auxiliary (Vr) outputs
are different and each has application-specific benefits which
can provide high value to the system designer:
Vo is a voltage-regulated output which has a constant power
mode instead of a conventional current limit. This output is
best suited as a source for isolated DC utility power, which may
be used directly or post-regulated with either a linear regulator
or a DC/DC converter. Vo is self protecting, cannot be overloaded and can be shorted indefinitely. So unlike design-yourown, or partially complete modules where significant design
margin is required to stay far away from current limit, there is
no need to oversize a Bias Power supply. The graceful transition from voltage regulation to constant power along with the
wide range of product ratings allows the designer to select a
supply tightly matched to the design load.
Vr is also a voltage-regulated output and is thermally protected
from overload. It has very low output ripple capable of driving
elements which require a low-noise, tightly-regulated supply.
In addition, Vr is supplied internally by Vo. This means that any
capacitance added to Vo can increase the hold-up time of Vr as
well.
*Note: maximum currents specified for constant voltage range
only. See V-I curve on page 2 for Vo in constant power range.
-40 to +85o C
0 – 95%, non-condensing
-40 to +105o C
1.35 x 1.12 x 0.58 inches
[34.214 x 28.372 x 14.757 mm]
UL / EN 60950-1 2nd Ed. (CB Report Available)
EN 55022, Class B, FCC Part 15, Class B
www.biaspower.com
BPSX 2 Series Data Sheet, Page 1 of 2
Revised 12/10/2013
Specifications subject to change
BIAS 2 Watt Power Supply
BPSX 2 Series Data Sheet
Single (Vo) or Dual (Vo & Vr) output
BPSX 2-08-00, -08-33, -08-50
BPSX 2-14-00, -14-33, -14-50
BPSX 2-24-00
PIN
DESCRIPTION
L1
Input High
L2
Input Low
N/C
No Connection
Vo
Output
GND
Ground
Vr
Vr Output
N/C
No Connection
Part Number Designation
Part Number
Output Configuration
Vo
Vr
BPSX 2-08-00
Single output
8 VDC
N/A
BPSX 2-14-00
Single output
14 VDC
N/A
BPSX 2-24-00
Single output
24 VDC
N/A
BPSX 2-08-33
Dual Output
8 VDC
3.3 VDC
BPSX 2-08-50
Dual Output
8 VDC
5 VDC
BPSX 2-14-33
Dual Output
14 VDC
3.3 VDC
BPSX 2-14-50
Dual Output
14 VDC
5 VDC
1.
Recommended Land Pattern, top view
2.
NOTES
Pins 0.031” [0.787 mm] round
Pins extend 0.125” [3.175 mm]
below stand-offs
Recommended Isolation,
Bottom View
V-I Curve (For Vo in Constant Power Range)
Vo, volts
V-I, typical
10
9
8
7
6
5
4
3
2
1
0
Constant Power Region
0
www.biaspower.com
100
200
300
400
Io, mA
500
600
700
800
BPSX 2 Series Data Sheet, Page 2 of 2
Revised 12/10/2013
Specifications subject to change
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
BIAS Power:
BPSX 2-05-00 BPSX 2-05-33 BPSX 2-08-00 BPSX 2-08-33 BPSX 2-08-50 BPSX 2-12-00 BPSX 2-12-33 BPSX 212-50 BPSX 2-14-00 BPSX 2-14-33 BPSX 2-14-50 BPSX 2-24-00 BPSX 2-24-33 BPSX 2-24-50
Similar pages