PAIRUI DMV25-4811 Dc-dc converter Datasheet

DC-DC Converter
DIP-Package
DMV-25 SERIES, 25WATT, 2:1 INPUT RANGE
FEATURES:
2 year warranty
Six-side shielded metal case
Low ripple and noise
Over current and short circuit protection
Remote on/off
Adjustable output voltage
Model
DMV25-1211
DMV25-1212
DMV25-1213
DMV25-1214
DMV25-1215
DMV25-1216
DMV25-1221
DMV25-1222
DMV25-1223
DMV25-1224
DMV25-1225
DMV25-2411
DMV25-2412
DMV25-2413
DMV25-2414
DMV25-2415
DMV25-2416
DMV25-2421
DMV25-2422
DMV25-2423
DMV25-2424
DMV25-2425
DMV25-4811
DMV25-4812
DMV25-4813
DMV25-4814
DMV25-4815
DMV25-4816
DMV25-4821
DMV25-4822
DMV25-4823
www.pairuigroup.com
Input voltage
(Vdc)
12(9~18)
24(18~36)
Output voltage
(Vdc)
Output current
(A)
Efficiency
Typ.
3.3
5
82%
5
5
82%
9
2.77
87%
12
2.08
87%
15
1.66
87%
24
1.04
87%
2.5
82%
±5
±9
±12
±15
±24
1.39
87%
1.04
87%
0.83
87%
0.52
87%
3.3
5
82%
5
5
82%
9
2.77
87%
12
2.08
87%
15
1.66
87%
24
1.04
87%
±5
2.5
82%
1.39
87%
1.04
87%
0.83
87%
0.52
87%
3.3
5
82%
5
5
82%
9
2.77
87%
12
2.08
87%
15
1.66
87%
24
1.04
87%
±5
±9
±12
2.5
82%
1.39
87%
1.04
87%
±9
±12
±15
±24
48(36~72)
Page:
1/4
Date: 07/24/2015
*Subject to change without notice
DC-DC Converter
DIP-Package
DMV-25 SERIES, 25WATT, 2:1 INPUT RANGE
Model
DMV25-4824
DMV25-4825
DMV25-11011
DMV25-11012
DMV25-11013
DMV25-11014
DMV25-11015
DMV25-11016
DMV25-11021
DMV25-11022
DMV25-11023
DMV25-11024
DMV25-11025
Input voltage
(Vdc)
Output voltage
(Vdc)
Output current
(A)
Efficiency
Typ.
±15
0.83
87%
±24
0.52
87%
3.3
5
82%
5
5
82%
9
2.77
87%
12
2.08
87%
15
1.66
87%
24
1.04
87%
±5
2.5
82%
±9
1.39
87%
±12
1.04
87%
±15
0.83
87%
±24
0.52
87%
48(36~72)
110(72~144)
Notes:
1. Other input and output models may available on request;
2. Above models are default to metal case.
ELECTRICAL
Input voltage range
12V
9-18Vdc
24V
18-36Vdc
48V
36-72Vdc
110V
72-144Vdc
Remote control
High level or vacant
Turn on
(Low level remote)
Low level or connect ground
Turn off
Output voltage accuracy
---
Vo1, Vo2: ±1%, ±3%
Output voltage adjustable
---
±10% max.
Line regulation
Nominal Load, full voltage
Load regulation
20% ~ 100% rated load
Vo1, Vo2: ±0.5%, ±4%
5%-50%-75% load capability
∆Vo1/∆t: ±4.0%/500μs
Dynamic response
(transient/recovery time)
Vo1, Vo2: ±0.2%, ±1.5%
Vo≤5.0V, ≤50mVp-p
Ripple and noise
20MHz BM, full load
Vo≥48V, ≤180mVp-p
Other, ≤100mVp-p
Isolation voltage
Input to output
(<2mA/min)
Input to case
Switching frequency
300KHz
Turn-on delay time
---
Operating temperature range
Free air
www.pairuigroup.com
1500Vdc
500Vdc
330KHz max.
≤200ms
-25℃ to +55℃
Page:
2/4
Date: 07/24/2015
*Subject to change without notice
DC-DC Converter
DIP-Package
DMV-25 SERIES, 25WATT, 2:1 INPUT RANGE
ELECTRICAL
Storage temperature range
Input under voltage protection
℃ to +105℃
---
-45
When input voltage is lower than the
Auto-recovery
low input voltage
Over current protection
---
Auto-recovery
Short circuit protection
---
Continuous auto-recovery
Cooling method
---
Cooling by air convection
Relative humidity
---
10%-90% max.
Weight
---
61.8g
MTBF
Bellcore TR-332, 25
℃
2x105Hrs
Notes: Unless otherwise specified, all the parameters of the test conditions are as follows: ambient temperature
25 , the nominal input voltage, pure resistive nominal load.
℃
MECHANICAL
CONNECTION
PIN #
SINGLE
DUAL
1
REM
REM
2
-Vin
-Vin
3
+Vin
+Vin
4
No pin
+Vo1
5
+Vo
COM
6
GND
-Vo2
7
TRIM
TRIM
Note:
* Unit is mm(inch).
LAYOUT
www.pairuigroup.com
Page:
3/4
Date: 07/24/2015
*Subject to change without notice
DC-DC Converter
DIP-Package
DMV-25 SERIES, 25WATT, 2:1 INPUT RANGE
ELECTRICAL CURVE
NOTES
RECOMMENDED TEST AND APPLICATION CIRCUIT
1. TVS&FUSE be helpful with over voltage protection and inrush limiting. Recommended FUSE better be 1.5~2times of
the rated current .
2. The input filter capacitor C6 could select the aluminum electrolytic capacitors or tantalum capacitors, and the
withstand voltage should be greater than the highest input voltage. Recommended capacitor should be between
22μF~100μF.
3. C1,C2 for the input filter capacitor,0.1~1μF high-frequency ceramics capacitor or chip capacitor are recommended.
The withstand voltage of output filter C5, C7 should be greater than the highest output voltage. Recommended
capacitor of C7 better within 100μF and C5 connected with the chip to reduce the input voltage peak, recommended
0.1~1μF high-frequency ceramics capacitor or chip capacitor.
www.pairuigroup.com
Page:
4/4
Date: 07/24/2015
*Subject to change without notice
Similar pages