EAHP3535RA1 Introduction The EAHP3535 series is a surface-mount high-power device featuring high brightness combined with a compact size that is suitable for all kinds of lighting applications such as general illumination, flash, spot, signal, industrial and commercial lighting. The thermal pad of this device is electrically isolated providing convenience in thermal and electrical design. The EAHP3535 series is one of the most promising devices in Everlight Americas high power product offering and is ready to face the challenges of today’s Solid-State Lighting requirements. Features LM-80 Certified General Lighting Small package with high efficiency Decorative and Entertainment ESD protection up to 8KV Soldering method: SMT Binning Parameters: Brightness, orientation marker lights (e.g. Forward Voltage ,Wavelength and steps, exit ways, etc.) Chromaticity 1 Applications Moisture Sensitivity Level: 1 RoHS compliant Matches ANSI binning Lighting Signal and Symbol Luminaries for Exterior and Interior Automotive Illumination Agriculture Lighting Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Absolute Maximum Ratings Parameter Symbol Ratings Unit Max. DC Forward Current (mA) IF 750[1] mA Max. Peak Pulse Current (mA) IPulse 1000[2] mA Max. ESD Resistance VB 8000 V Reverse Voltage VR Note 3 V Thermal Resistance Rth 10 ~ 12[4] °C/W Max. Junction Temperature TJ 125[5] °C Operating Temperature TOpr -40 ~ +100[6] °C Storage Temperature TStg -40 ~ +100 °C Max. Soldering Temperature TSol 260 °C Max. Allowable Reflow Cycles n/a 2 cycles Notes: 1. 2. 3. 4. 5. 6. Maximum forward current for 3W is 750mA (Thermal Pad=25°C). Duty cycle = 1/10@1KHZ The EAHP3535 series LEDs are not designed for reverse bias use. Thermal Resistance is 10°C/W for Blue, Green, Cool-White, Neutral-White,and Warm-White LEDs and 12°C/W for Red, Amber, and Orange LEDs. Maximum junction temperature of Cool-White, Neutral-White, Warm-White, Blue, Green, Red, Amber, and Orange LEDs is 125°C. Maximum Operating Temperature (Thermal Pad) of Cool-White, Neutral-White, Warm-White, Blue, Green, Red, Amber, and Orange LEDs is 100°C. JEDEC Moisture Sensitivity Floor Life Soak Requirements Standard Level 1 2 Time (hours) Conditions Time (hours) Conditions Unlimited ≦30°C / 85% RH 168 (+5/-0) 85°C / 85% RH Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series PN of the EAHP3535 series: Color LEDs Color Red Order Code EAHP3535RA1 Minimum CCT (K) Forward Luminous Wavelength Voltage Flux (lm) (nm) (V) 90 615~630 2.05~3.25 Note: Each 3W direct color PN is based on the min. bin and includes four adjacent bins. 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Product Binning Luminous Flux Bins Group E F Bin Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 4 5 6 8 10 13 17 20 23 27 33 39 45 52 60 70 80 90 5 6 8 10 13 17 20 23 27 33 39 45 52 60 70 80 90 100 Group J K N Bin Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 100 110 120 130 140 150 160 180 200 225 250 275 300 325 350 375 400 425 450 475 500 525 110 120 130 140 150 160 180 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 Radiometric Power Bins 4 Group Bin Minimum Radiometric Power(mW) Maximum Radiometric Power(mW) Q 1 2 3 4 5 6 7 8 9 0 25 50 75 100 125 175 225 275 25 50 75 100 125 175 225 275 350 Group Bin Minimum Radiometric Power(mW) Maximum Radiometric Power(mW) R 1 2 3 4 5 6 7 8 9 350 425 500 600 700 800 900 1000 1300 425 500 600 700 800 900 1000 1300 1600 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Forward Voltage Bins Bin Minimum Forward Voltage (V) Maximum Forward Voltage (V) U1 U2 U3 U4 V1 V2 V3 V4 1.75 2.05 2.35 2.65 2.95 3.25 3.55 3.85 2.05 2.35 2.65 2.95 3.25 3.55 3.85 4.15 Notes: 1. Forward voltage measurement tolerance: ±0.1V. 2. Forward voltage bins are defined at IF=350mA operation. 3. Other Forward Voltage bins for White LEDs available upon request. Please contact your local Everlight Americas sales office. 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Color Bins Group B (Blue) G (Green) A (Amber) R (Red) D (Deep-Red) F (Far-Red) Bin 1 2 3 4 5 6 7 8 1 2 3 4 5 6 1 2 3 4 5 6 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Minimum Dominant Maximum Dominant Wavelength (nm) 430 435 440 445 450 455 460 465 520 525 530 535 540 545 580 582.5 585 587.5 590 592.5 610 615 620 625 635 640 645 650 655 660 665 670 700 710 715 720 725 730 735 740 Wavelength (nm) 435 440 445 450 455 460 465 470 525 530 535 540 545 550 582.5 585 587.5 590 592.5 595 615 620 625 630 640 645 650 655 660 665 670 675 710 715 720 725 730 735 740 745 Notes: 1. 2. 3. 6 Dominant / Peak wavelength measurement tolerance: ±1nm. Dominant / Peak wavelength bins are defined at IF=350 mA operation. The range of wavelength in Royal-Blue, Deep-Red and Far-Red is described as peak-wavelength. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Optical Characteristics Min. Typ. Max. Typical Temperature Coefficient of Dominant Wavelength (nm/°C)-(△λD/△ TJ) Cool-White 4745K 5700K 7050K --- Note 5 Neutral-White 3710K 4260K 4745K --- Note 5 Warm-White 2580K 3000K 3710K --- Note 5 Red 620nm --- 630nm 0.05 120 Orange 610nm --- 620nm 0.08 120 Amber 585nm --- 595nm 0.1 120 Green 520nm --- 535nm 0.05 120 Blue 460nm --- 470nm 0.05 120 Deep-Red 645nm --- 675nm 0.08 120 Far-Red 715nm --- 745nm 0.04 120 Color Dominant WavelengthλD Peak WavelengthλP Color Temperature CCT Typical Viewing Angle (degrees) 2θ1/2 Notes: 1. 2. 3. The test tolerance of Everlight Americas is ±0.5nm for dominant wavelength, ±5% for CCT. Viewing angle is the width of half the light output intensity in all directions of 180°. All Cool-White, Neutral-White, Warm-White, and dominant wavelength below 550nm LEDs are made with Indium Gallium Nitride (InGaN). 4. All LEDs with dominant wavelength exceeding 550nm are made with Aluminum Indium Gallium Phosphide (AlInGaP). 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Mechanical Dimension Notes: 1. Dimensions are in millimeters. 2. Tolerances unless mentioned are ± 0.15mm. 3. The thermal pad is electrically isolated from the Anode and Cathode contact pads. 4. Do not handle the device by the lens. Incorrect force applied to the lens may lead to the failure of devices. 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Pad Configuration 9 PAD FUNCTION 1 ANODE 2 CATHODE P THERMAL PAD Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Reflow Soldering Characteristics For Reflow Process a. EAHP3535 series are suitable for SMT processes. b. Curing of glue in oven must be according to standard operation flow processes. c. Reflow soldering should not be done more than twice. d. In soldering process, stress on the LEDs during heating should be avoided. e. After soldering, do not bend the circuit board. 10 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Wavelength Characteristics For Deep-Red, Red, Amber, Yellow, Green, Cyan, Blue, Royal-Blue @ Thermal Pad Temperature = 25℃ f 11 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Typical Light Output Characteristic V.S. Thermal Pad Temperature Cool-White, Neutral-White, Warm-White, Green, Cyan, Blue, Royal-Blue for 350mA Drive Current Deep-Red, Red, Orange, Amber for 350mA Drive Current 12 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Typical Electrical Characteristics For Cool-White, Neutral-White, Warm-White, Green, Blue @ Thermal Pad Temperature = 25℃ For Red, Orange, Amber, @ Thermal Pad Temperature = 25℃ 13 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET EAHP3535 Series Typical Relative Luminous Flux V.S. Forward Current For Green, Blue, @ Thermal Pad Temperature = 25℃ For Red, Orange, Amber, @ Thermal Pad Temperature = 25℃ 14 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Typical Wavelength Shift Characteristics V.S. Forward Current For Blue @ Thermal Pad Temperature = 25℃ For Green @ Thermal Pad Temperature For Green @ Thermal Pad Temperature = 25℃ 15 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series For Red @ Thermal Pad Temperature = 25℃ Current Derating Curves 16 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Relative Flux and Forward Voltage V.S. Junction Temperature (IF = 700 mA) White Relative Luminous Flux 1.2 1.0 0.8 0.6 0.4 0.2 25 50 75 100 125 150 o Junction Temperature ( C) White 0.00 -0.05 Voltage Shift (V) -0.10 -0.15 -0.20 -0.25 -0.30 -0.35 -0.40 -0.45 -0.50 25 50 75 100 125 150 o Junction Temperature ( C) 17 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Current Derating Curves Current Derating Curve for 750mA Drive Current Cool-White, Neutral-White, Warm-White, Green, Cyan, Blue, Royal-Blue, Far-Red, Deep-Red, Red, Amber, Yellow 18 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Typical Radiation Patterns Typical Diagram Characteristics of Radiation for Cool-White, Neutral-White, Warm-White 0 1.0 0 10 0 20 0 Relative Intensity (a.u.) 30 0 40 0.8 0 50 0 0.6 60 0.4 70 0.2 0.0 0 0 -90 -70 0 0 80 0 90 -50 0 -30 0 -10 0 0 Viewing angle (degree) Notes: 19 1. 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 2. View angle tolerance is ± 5∘. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Emitter Tape Packaging Carrier Tape Dimensions as the following: Reel: 400pcs, MOQ> 2Kpcs(has to be a multiple of 400pcs) Feed Direction Notes: 1. Dimensions are in millimeters. 2. Tolerances for fixed dimensions are ±0.1mm. Moisture Resistant Packaging Label Label 20 Aluminum moistue-proof bag Aluminum moisture-proof bag Desiccant Desiccant Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 Label Label www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Emitter Reel Packaging Reel Dimensions Notes: 1. Dimensions are in millimeters. 2. Tolerances unless mentioned are ±0.1mm. Product Labeling Label Explanation CPN: Customer Specification (when required) P/N : Everlight Americas Production Number QTY: Packing Quantity CAT: Luminous Flux (Brightness) Bin HUE: Color Bin REF: Forward Voltage Bin LOT No: Lot Number MADE IN TAIWAN: Production Place 21 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Storage Conditions Before the package is opened. The LEDs should be stored at 30°C or less and 85%RH or less after being shipped from Everlight Americas and the storage life limits are 1 year. The LEDs can be stored up to 3 years If in a sealed container with a nitrogen atmosphere and moisture absorbent material. After opening the package: The LED's floor life is 1 year under 30℃ or less and 60%RH or less. The LED should be soldered with 168hrs (7days) after opening the package. If unused LEDs remain, it should be stored in moisture proof packages. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 22 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 www.everlightamericas.com DATASHEET SMD HP EAHP3535 Series Revision History Current version: 2014/07/03 Device No: DHE-000XXXX Version. 1 Page 23 Subjects (major change in previous version) Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date: Nov.08.2011. Issue No: 1 Date of change www.everlightamericas.com