GOOD-ARK A3S Surface mount glass passivated standard rectifier Datasheet

A1S thru A7S
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
•
•
•
•
•
•
•
•
Glass passivated Standard Rectifiers
Very low profile - typical height of 1.0 mm
Low forward voltage
g drop
p
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
AEC-Q101 qualified
High temperature soldering guaranteed: 260℃/10 seconds
Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD‐123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
A1S
A2S
A3S
A4S
A5S
A6S
A7S
Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TL
(See Fig.1)
Peak forward surge current 8.3 ms single half sinewave superimposed on rated load
VRRM
VRMS
VDC
50
35
50
100
70
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
V
V
V
Operating junction and storage temperature range
Electrical Characteristics
Parameter
Maximum instantaneous forward
1A
voltage
Typical reverse recovery time
Typical junction capacitance
Typical thermal resistance
1)
1.0
A
IFSM
50
A
TJ, TSTG
- 55 to + 150
°C
(TA = 25 °C unless otherwise noted)
Test Conditions
Maximum DC reverse current at
rated DC blocking voltage
IF(AV)
TA=25℃
TA=125℃
IF=0.5A,IR=1.0A,
Irr=0.25A
4.0 V, 1 MHz
juntion to ambient
juntion to case
juntion to mount
Symbol
VF
IR
A1S
A2S
A3S
A4S
A5S
A6S
1.1
A7S
Unit
Volts
5
µA
500
trr
1.8
uS
CJ
6
pF
RθJA
RθJC
RθJM
63
22
℃/W
2
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2014.08-Rev.A
A1S thru A7S
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 2.Maximum Non‐Repetitive Peak
Forward Surge Current
Figure 1.Forward Current Derating Curve
Figure 3. Typical Reverse Characteristics
Figure 4. Typical Junction Capacitance
Figure 5. Typical Instantaneous Forward Characteristics
www.goodark.com
2/4
2014.08-Rev.A
A1S thru A7S
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Package Outline Dimensions
Unit: mm
DIM
Unit: inch
MIN
MAX
MIN
MAX
A
0.9
1.08
0.035
0.043
A1
0
0.1
0.000
0.004
B
0.85
1.05
0.033
0.041
C
0.1
0.25
0.004
0.010
D
1.7
2
0.067
0.079
E
2.9
3.1
0.114
0.122
L
0.43
0 43
0.83
0 83
0.017
0 017
0.033
0 033
HE
3.5
3.9
0.138
0.154
Soldering footprint
Packing Information
Packing quantities:
3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.08-Rev.A
A1S thru A7S
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Good-Ark product best suited to the customer’s application; they do not convey any license under
any intellectual property rights,
rights or any other rights,
rights belonging to Suzhou Good-Ark
Good Ark Electronics Co.,
Co
Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement
of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs
and algorithms represents information on products at the time of publication of these materials, and
are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product
improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest
product information before purchasing a product listed herein. The information described here may
contain technical inaccuracies
inacc racies or typographical
t pographical errors.
errors Suzhou
S ho Good-Ark
Good Ark Electronics Co.,
Co Ltd.
Ltd
assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or
errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd.
by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Suzhou
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss
resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or
reproduce
d
in
i whole
h l or in
i partt these
th
materials.
t i l
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details
on these materials or the products contained herein.
www.goodark.com
4/4
2014.08-Rev.A
Similar pages