Kingbright APTB1612CGKQWDF Wide viewing angle Datasheet

1.6X1.25mm BI-COLOR SMD CHIP LED LAMP
ATTENTION
Part Number: APTB1612CGKQWDF
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Green
White
Features
Descriptions
z 1.6mmx1.25mm SMD LED, 0.65mm thickness.
z The Green source color devices are made with AlGaInP
z Bi-color,low power consumption.
on GaAs substrate Light Emitting Diode.
z The source color devices are made with InGaN Light
z Wide viewing angle.
z Ideal for backlight and indicator.
Emitting Diode.
z Electrostatic discharge and power surge could damage
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
the LEDs.
z It is recommended to use a wrist band or anti-
z RoHS compliant.
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
GREEN
WHITE
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 1 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
Selection Guide
Part No.
Emitting Color (Material)
Iv (mcd) [2]
@ 20mA
Lens Type
Green (AlGaInP)
APTB1612CGKQWDF
Viewing
Angle [1]
Min.
Typ.
20
50
120
250
120°
Yellow Fluorescent
White (InGaN)
2θ1/2
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
[Green]
Symbol
Parameter
Emitting Color
Typ.
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
574
nm
IF=20mA
Green
570
nm
IF=20mA
Spectral Line Half-width
Green
20
nm
IF=20mA
C
Capacitance
Green
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Electrical / Optical Characteristics at TA=25°C
[White]
Symbol
Parameter
Emitting Color
Typ.
Max.
Units
Test Conditions
VF [1]
Forward Voltage
White
3.3
4.0
V
IF=20mA
IR
Reverse Current
White
50
uA
VR = 5V
pF
VF=0V;f=1MHz
x [2]
0.31
Chromaticity Coordinates
White
y [2]
C
0.31
Capacitance
White
100
Notes:
1.Forward Voltage: +/-0.1V.
2. Measurement Tolerance Of The Chromaticity Coordinates Is ±0.01.
3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 2 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
Absolute Maximum Ratings at TA=25°C
Parameter
Green
White
Units
Power dissipation
75
120
mW
DC Forward Current
30
30
mA
Peak Forward Current [1]
150
150
mA
Electrostatic Discharge Threshold (HBM)
3000
250
V
Reverse Voltage
5
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
V
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 3 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
APTB1612CGKQWDF
Green
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 4 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
White
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 5 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
APTB1612CGKQWDF
White CIE
0.40
c0
0.35
y
b1
0.30
b2
a0
0.25
a2
0.20
0.20
0.25
0.30
0.35
0.40
x
a2
b1
x
y
x
y
x
y
0.263
0.213
0.282
0.245
0.298
0.271
0.282
0.245
0.298
0.271
0.313
0.296
0.265
0.265
0.286
0.299
0.306
0.332
0.242
0.226
0.265
0.265
0.286
0.299
0.313
0.296
0.329
0.325
0.329
0.325
0.358
0.372
0.329
0.371
0.363
0.400
0.306
0.332
0.329
0.371
a0
c0
b2
Notes:
Shipment may contain more than one chromaticity regions.
Orders for single chromaticity region are generally not accepted.
Measurement tolerance of the chromaticity coordinates is ±0.01.
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 6 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
APTB1612CGKQWDF
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 7 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
PACKING & LABEL SPECIFICATIONS
APTB1612CGKQWDF
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAL1001
REV NO: V.5B
DATE: SEP/01/2015
PAGE: 8 OF 8
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203011788
Similar pages