MINI AVA-183A-D Monolithic amplifier Datasheet

Wideband, Microwave
Monolithic Amplifier Die
50Ω
AVA-183A-D+
5 to 20 GHz
The Big Deal
• Ultra-wideband, 5 to 20 GHz
• Integrated matching, DC blocks, bias circuits
• Unpackaged die form
Product Overview
The AVA-183A-D+ is an ultra-wideband microwave amplifier die fabricated using InGaAs PHEMT
technology operating over extremely wide frequency range from 5 to 20 GHz. This model integrates the
entire matching network with the majority of the bias circuit, reducing the need for complicated external
circuits and simplifying board layouts. These advantages make the AVA-183A-D+ extremely user friendly
and enable simple, straightforward use.
Key Features
Feature
Advantages
Ultra-wideband, 5 to 20 GHz
Very broad frequency range supports a wide array of applications from microwave radio and
radar to military communications and countermeasures, among others.
Excellent gain flatness, ±1.8 dB
Minimizes the need for external equalizer networks and gain flattening components, making it
a great fit for instrumentation and EW applications.
High isolation, 32 to 43 dB
With high reverse isolation (20 – 32 dB directivity), the AVA-123A-D+ is an excellent choice
for buffering broadband circuits. It is an ideal LO driver amplifier and provides designers
system flexibility and margin when integrating cascaded RF components.
Single +5V supply
• No hassle associated with amplifiers using dual supply such as power supply sequencing.
• Integrated output bias-tee simplifies layout and reduces cost.
Unpackaged die
Enables the user to integrate the amplifier directly into hybrids.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 1 of 6
Wideband, Microwave
Monolithic Amplifier Die
AVA-183A-D+
Product Features
• Gain, 13.5 dB typ. & Flatness, ±1.8 dB
• Output Power, up to +19.0 dBm typ.
• Excellent isolation, 39 dB typ. at 12 GHz
• Single Positive Supply Voltage, 5.0V
• Integrated DC blocks, Bias-Tee & Microwave bypass capacitor
• Unconditionally Stable
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Typical Applications
• Military EW and Radar
• DBS
• Wideband Isolation amplifier
• Microwave point-to-point radios
• Satellite systems
Ordering Information: Refer to Last Page
General Description
The AVA-183A-D+ is a wideband monolithic amplifier die fabricated using InGaAs PHEMT technology with
outstanding gain flatness up to 20 GHz. It is manufactured using PHEMT technology and is unconditionally
stable. Its outstanding isolation enables it to be used as a wideband isolation amplifier or buffer amplifier
in a variety of microwave systems.
Simplified Schematic and Pad description
DC
RF-OUT
RF-IN
Function
Description
RF-IN
RF input pad
RF-OUT
DC (VD1, VD2)
GND
RF output pad
DC power supply
Connected to ground
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
REV. OR
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
M151772
AVA-183A-D+
RS/TH/CP
160915
Page 2 of 6
AVA-183A-D+
Wideband Monolithic PHEMT MMIC Amplifier
Electrical Specifications(1) at 25°C, Zo=50Ω, (refer to characterization circuit, Fig.1)
Parameter
Condition (GHz)
Frequency Range
DC Voltage (VD1, VD2)
DC Current (ID1+ID2)
Min.
Typ.
5.0
104
5.0
8.0
10.0
12.0
14.0
16.0
20.0
5.0
8.0
10.0
12.0
14.0
16.0
20.0
5.0
8.0
10.0
12.0
14.0
16.0
20.0
5.0
8.0
10.0
12.0
14.0
16.0
20.0
5.0
8.0
10.0
12.0
14.0
16.0
20.0
5.0
8.0
10.0
12.0
14.0
16.0
20.0
12
Gain
Input Return Loss
Output Return Loss
Output IP3 (2)
Output Power @ 1 dB compression
Noise Figure
Directivity (Isolation-Gain)
DC Current Variation vs. Voltage
Thermal Resistance
5.0
131
11.4
15.1
14.5
13.9
13.6
13.5
12.1
8.2
17.2
12.9
12.0
12.2
12.8
9.3
6.2
15.1
11.8
10.3
9.8
9.8
14.8
25.5
28.4
27.0
25.8
34.9
25.2
27.8
15.2
17.9
18.2
18.3
18.9
19.2
15.8
8.0
4.1
4.3
4.8
5.8
6.3
6.2
25.0
0.002
51
Max.
Units
20.0
GHz
V
mA
166
dB
dB
dB
dBm
dBm
dB
dB
mA/mV
°C/W
Absolute Maximum Ratings(3)
Parameter
Ratings
Operating Temperature
Channel Temperature
DC Voltage VD1, VD2 Pad (4)
DC Voltage RF-IN &RF OUT (4)
Power Dissipation
DC Current VD1 & VD2
Input Power (CW)
-40°C to 85°C
150°C
5.5 V
10 V
980 mW
180 mA
20 dBm
1. Measured on Mini-Circuits Die Characterization test board
See Characterization Test Circuit (Fig. 1)
2. At Pout=8 dBm/tone
3. Permanent damage may occur if any of these limits are exceeded.
These maximum ratings are not intended for continuous normal operation.
Measured in industry standard 3x3 min 8-lead MCLP package
4. For continuous operation do not exceed 5.2V
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 3 of 6
AVA-183A-D+
Wideband Monolithic PHEMT MMIC Amplifier
Page 1 of 1
45
40
Pout
OIP3 (dBm)
35
-5dBm
-3dBm
0dBm
3dBm
5dBm
6dBm
7dBm
8dBm
9dBm
10dBm
30
25
20
15
10
4000
6000
8000
10000 12000 14000 16000 18000 20000
FREQUENCY (MHz)
Figure 1: Test Circuit used for characterization. Gain, Return loss, Output power at 1dB compression
(P1 dB), output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer.
Conditions:
TESTED WITH AGILENT PNA-X MODEL:N5242A S/N:MY47200155 CAL DUE DATE: 30th Sept 2015
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 8 dBm/tone at output.
Die Layout
Confidential
Bonding Pad Position
(Dimensions in µm, Typical)
Fig 2. Die Layout
Fig 3. Bonding Pad Positions
Critical Dimensions
Parameter
Values
Die Thickness, µm
100
Die Width, µm
1240
Die Length, µm
1240
Notes
Bond
µm
x specification
80
A. Performance
and Pad
qualitySize,
attributes
and conditions not expressly stated 80
in this
document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 4 of 6
AVA-183A-D+
Wideband Monolithic PHEMT MMIC Amplifier
Assembly and Handling Procedure
1. Storage
Dice should be stored in a dry nitrogen purged desiccators or equivalent.
2. ESD
MMIC PHEMT amplifier dice are susceptible to electrostatic and mechanical damage. Die are supplied in
antistatic protected material, which should be opened in clean room conditions at an appropriately grounded anti-static worksta
tion. Devices need careful handling using correctly designed collets, vacuum pickup tips or sharp antistatic tweezers to deter
ESD damage to dice.
3. Die Attach
The die mounting surface must be clean and flat. Using conductive silver filled epoxy, recommended epoxies are DieMat
DM6030HK-PT/H579 or Ablestik 84-1LMISR4. Apply sufficient epoxy to meet required epoxy bond line thickness, epoxy fillet
height and epoxy coverage around total die periphery. Parts shall be cured in a nitrogen filled atmosphere per manufacturer’s
cure condition. It is recommended to use antistatic die pick up tools only.
4. Wire Bonding
Bond pad openings in the surface passivation above the bond pads are provided to allow wire bonding to the dice gold bond
pads. Thermosonic bonding is used with minimized ultrasonic content. Bond force, time, ultrasonic power and temperature are
all critical parameters. Suggested wire is pure gold, 1 mil diameter. Bonds must be made from the bond pads on the die to
the package or substrate. All bond wires should be kept as short as low as reasonable to minimize performance degradation due
to undesirable series inductance.
Assembly Diagram
Figure 1 & Assembly Diagram
VD1 , VD2
100 pF
RF-IN
RF-Out
Ground
Recommended Wire Length, Typical
Wire
Wire Length
(mm)
Wire Loop Height
(mm)
RF-In, RF-Out
0.25
0.15
VD1, VD2
0.50
0.15
Ground
0.25
0.15
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 5 of 6
AVA-183A-D+
Wideband Monolithic PHEMT MMIC Amplifier
Additional Detailed Technical Information
additional information is available on our dash board.
Data Table
Performance Data
Swept Graphs
S-Parameter (S2P Files) Data Set with and without port extension(.zip file)
Case Style
Die
Die Ordering and packaging
information
Quantity, Package
Model No.
Small, Gel - Pak: 10,50,100 KGD*
Medium†, Partial wafer: KGD*<5K
Large†, Full Wafer
AVA-183A-DG+
AVA-183A-DP+
AVA-183A-DF+
Available upon request contact sales representative
†
Refer to AN-60-067
Environmental Ratings
ENV-80
*Known Good Dice (“KGD”) means that the dice in question have been subjected to Mini-Circuits DC test performance criteria and measurement
instructions and that the parametric data of such dice fall within a predefined range. While DC testing is not definitive, it does help to provide a higher
degree of confidence that dice are capable of meeting typical RF electrical parameters specified by Mini-Circuits.
ESD Rating**
Human Body Model (HBM): Class 1A (250 to <500V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (25V) in accordance with ANSI/ESD STM5.2-1999
** Tested in industry standard 3x3 mm 8-lead MCLP package.
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
D. Mini-Circuits does not warrant the accuracy or completeness of the information, text, graphics and other items contained within this document and same are provided as an accommodation and on an “As is” basis, with all faults.
E. Purchasers of this part are solely responsible for proper storing, handling, assembly and processing of Known Good Dice (including, without limitation, proper ESD preventative measures, die preparation, die attach, wire bond
ing and related assembly and test activities), and Mini-Circuits assumes no responsibility therefor or for environmental
effects on Known Good Dice.
F. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-
Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party Notes
trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation by any such A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
third-partyand
of performance
Mini-Circuits
its products.
B. Electrical specifications
dataor
contained
in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 6 of 6
Similar pages