PRODUCT DATASHEET CARMEN series last update 3/3/2017 DETAILS Product Number CP15313_CARMEN-W-B Family CARMEN Type Assembly Color black Diameter 69,5 mm Height 36,26 mm Style round Optic Material PC,PMMA Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 3/03/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector CLU700/701 56 deg Wide 86 % 1.100 BJB: 47.319.6060 CLL02x/CLU02x (LES10) sim: 55 Wide sim: 73 % sim: 0.960 - CLL02x/CLU02x (LES10) sim: 55 Wide sim: 82 % sim: 1.200 BJB: 47.319.6060 CXA/B 13xx 57 deg Wide 89 % CXA/B 15xx sim: 53 Wide sim: 73 % sim: 0.969 - COB D Series LES 9.8 mm 56 deg Wide 82 % 1.040 BJB: 47.319.6060 COB D Series LES 9.8 mm 56 deg Wide 82 % 1.040 A.A.G. STUCCHI: 8100/G2 MJT COB LES 6 55 deg Wide 84 % 1.100 BJB: 47.319.6060 1.100 - May 23rd 2017 4:45 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H Example assembly: 4 4 . 9 6 5 1 23.36 .0 4 3 3 35 Bottom view Scale: 1:1 2 LES size up to ~14mm 2 Side view A Scale: 1:1 20.77 2 36.26 3rd party socket INDEX PART NO 1 2 CARMEN-LENS F15211_CARMEN-HLD-B Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. G PMMA PC BLACK Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE CARMEN-B SIZE 1 PART NUMBER A3 SCALE H MATERIAL COLOUR 1:1 WEIGHT SHEET B A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.