SAW Components SAW filter Band 38 LTE-2600 Series/type: Ordering code: B8804 B39262B8804P810 Date: Version: July 23, 2014 2.1 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B8804 SAW filter 2595.0 MHz Data sheet Application ■ Low-loss RF filter for mobile telephone Band 38 LTE-2600 systems Low amplitude ripple Usable passband 50 MHz Impedance at input and output 50 Ω Unbalanced to unbalanced operation Features 2 3 1 bottom view 5 4 0.385 0.385 0.45 max. Package size 1.1 x0.9 Max. package height 0.45mm RoHS compatible Approx. weight 0.001g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitive Level 3 0.25 ■ ■ ■ ■ ■ ■ ■ ■ 0.18 mm2 0.5 ■ ■ ■ ■ side view 1.1 4 1 0.9 5 2 top view 3 Pin configuration ■ 1 ■ 4 ■ 2,3,5 Input, unbalanced Output, unbalanced To be grounded Please read cautions and warnings and important notes at the end of this document. 2 1 4 2,5 3 July 23, 2014 SAW Components B8804 SAW filter 2595.0 MHz Data sheet Characteristics Temperature range for specification: Terminating source impedance: Terminating load impedance: T = ZS = ZL = –30 ˚C to +85 ˚C 50Ω 50 Ω min. max. — typ. @ 25 ˚C 2595.0 — MHz Maximum insertion attenuation 2570.0... 2620.0 MHz αmax — 1.7 2.4 dB Amplitude ripple (p-p) 2570.0... 2620.0 MHz ∆α — 0.4 1.2 dB — 1.4 2.0 — 1.4 2.0 35 35 35 35 34 30 40 25 39 42 43 41 38 50 47 30 — — — — — — — — Center frequency fC Input VSWR 2570.0... 2620.0 MHz Output VSWR 2570.0... 2620.0 MHz α Attenuation 10.0 1580.0 1606.0 2300.0 2400.0 2680.0 2705.0 3000.0 ... ... ... ... ... ... ... ... 1580.0 1606.0 2300.0 2400.0 2510.0 2705.0 3000.0 6000.0 MHz MHz MHz MHz MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 3 July 23, 2014 dB dB dB dB dB dB dB dB SAW Components B8804 SAW filter 2595.0 MHz Data sheet Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for band VIII RX passband, fCarrier ranges from 927.4 MHz (lowest Rx channel) to 957.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) 2 df = 1 Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage T Tstg VDC VESD Input power at 2570 ... 2620.0 MHz PIN –40/+85 –40/+851) 52) 503) 504) 6005) 23 ˚C ˚C V V V V dBm Machine Model Human Body Model Charged Device Model ON State condition: CW for 2000h @ 55˚C 1) extended upper limit: 168h @ 125C acc. to IEC 60068-2-2 Bb 2) 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy. 3) acc. to JESD22-A115B (MM - Machine Model), 10 negative & 10 positive pulses. 4) acc. to JESD22-A114F (HDM - Human Body model), 1 negative & 1 positive pulse. 5) acc. to JESD22-C101C (CDM - Field Induced Charged Device Model), 3 negative & 3 positive pulses. Please read cautions and warnings and important notes at the end of this document. 4 July 23, 2014 SAW Components B8804 SAW filter 2595.0 MHz Data sheet Transfer function for CW signals (narrowband) Transfer function for CW signals (wideband) Please read cautions and warnings and important notes at the end of this document. 5 July 23, 2014 SAW Components B8804 SAW filter 2595.0 MHz Data sheet Smith charts S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 6 July 23, 2014 SAW Components B8804 SAW filter 2595.0 MHz Data sheet References Type B8804 Ordering code B39262B8804P810 Marking and package C61157-A8-A56 Packaging F61074-V8255-Z000 Date codes L_1126 B8804_NB.s2p S-parameters B8804_WB.s2p See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011,on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“Directive“) with due regards to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2013. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 July 23, 2014 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 8 July 23, 2014