Miniature Snap Switch Single Pole D4 Series Features • • • • Choice of standard or light operating force Long life coil spring mechanism RoHS compliant Cadmium free • • • Various aux actuators Various terminal types Agency approved extended life versions available 1 Standard Parts D413-R1AA-G2 D413-R1LA-G2 D413-R1LD-G2 D413-R1RA-G2 D419-R1AA-G2 D423-R1RA-G2 D423-R1RD-G2 D429-R1TD-G2 D429-R1AA-G2 D429-R1LD-G2 D429-R1LL-G2 D429-R1MD-G2 D429-R1ML-G2 D433-R1AA-G2 D433-R1LD-G2 D433-R1RA-G2 D433-R1RD-G2 D439-R1LL-G2 D439-V1ML-G2 D443-R1AA-G2 D443-R1LD-G2 D443-R1MD-G2 D443-R1RA-G2 D443-R1RD-G2 D449-R1AA-G2 D449-R1LD-G2 D449-R1LL-G2 D449-R1MD-G2 D449-R1ML-G2 D449-R1RA-G2 D449-R1RD-G2 D453-B8AA-G2 D453-R1AA-G2 D453-R1RA-G2 D453-R1RD-G2 D459-R1AA-G2 D459-R1LD-G2 D459-R1LL-G2 D459-R1ML-G2 1 The part number configuration matrix below provides details to the part numbers above. For configurable part numbers that are not listed above, not listed in your region, or for custom part numbers, contact the factory or your distributor. For information on crossing discontinued U.S. only part numbers, see D4 cross-reference chart at www.cherryswitches.com. D413-R1AA-G2 (most part numbers end in –G2; see D4 cross-reference chart for exceptions) Part Number Breakdown Series D4 Contact Rating2 1 0.1 A 2 3A 3 5A 4 10 A 5 15 A 8 21 A Configuration3 O 125 OC 85 C 1 2 3 7 8 9 SPST – NO SPST – NC SPDT SPST – NO SPST – NC SPDT Standard Op. Force “Y” Light Op. Force “X” G H M N P R SPST – NO SPST – NC SPDT SPST – NO SPST – NC SPDT 150 OC S T U SPST – NO SPST – NC SPDT 2 UL AC current rating; see table on reverse for complete details D48 only available with light operating force 3 A1 B8 P4 P5 PA PB Q1 Q3 Welding Short solder 1.2 x 0.5 (0.047 x 0.020) PCB, underside* 1.2 x 0.5 (0.047 x 0.020) PCB, rear* 1.2 x 0.5 (0.047 x 0.020) PCB, housing side* 1.2 x 0.5 (0.047 x 0.020) PCB, cover side* 4.8 x 0.8 (0.187 x 0.032) QC, straight* 4.8 x 0.8 (0.187 x 0.032) QC, dog leg* *not available for D48 R1 R3 S1 V1 V3 W9 X5 Y5 Terminal Type mm (inches) 4.8 x 0.5 (0.187 x 0.020) QC, straight** 4.8 x 0.5 (0.187 x 0.020) QC, dog leg** Solder with temp stop 6.3 x 0.8 (0.250 x 0.032) QC, straight 6.3 x 0.8 (0.250 x 0.032) QC, dog leg Screw* 1.5 x 0.8 (0.059 x 0.032) QC, 2.5 mm grid 6.3 x 0.8 (0.250 x 0.032) QC, 5 mm grid **not available for D45 or D48 Actuator Type mm (inches) Actuation length AA Button N/A MA Lever, high ratio JA SS lever, standard ratio 21.2 (0.835) MD Lever, standard ratio JD SS lever, standard ratio 35.6 (1.4) ML Lever, high ratio JL SS lever, standard ratio 69.9 (2.75) RA Roller, standard ratio KA SS lever, high ratio 25.7 (1.01) RD Roller, standard ratio Roller, simulated, rear mount KD SS lever, high ratio 40.1 (1.58) SA KL SS lever, high ratio 74.4 (2.93) TA Roller, high ratio LA Lever, standard ratio 21.2 (0.835) TD Roller, high ratio LD Lever, standard ratio 35.6 (1.4) UA Roller, simulated, front mount LL Lever, standard ratio 69.9 (2.75) For actuator details, see D4 actuator reference sheet at www.cherryswitches.com www.cherryswitches.com Page 1 of 2, Last update 2016-02-09, Specifications subject to change without notice. Actuation length 25.7 (1.01) 40.1 (1.58) 74.4 (2.93) 20.6 (0.811) 34.1 (1.34) 20.6 (0.811) 25.1 (0.988) 38.6 (1.52) 25.1 (0.988) Light Op. Force Electrical Specifications – Contact Ratings Contact 1 2 3 4 5 8 EN61058 0.1 (0.5) A, 250 VAC; 0.5 A, 30 VDC; 1 (1) A, 250 VAC 3 (1) A, 250 VAC 6 (2) A, 250 VAC 10 (3) A, 250 VAC 16 (4) A, 250 VAC 21 (8) A, 250 VAC UL1054 0.1 A, 125/250 VAC; 0.5 A, 30 VDC; 1 A, 125 VAC 3 A, 125/250 VAC; 1/10 HP, 250 VAC 5 A, 125/250 VAC; ¼ HP, 250 VAC 10 A, 125/250 VAC; 6 A, 30 VDC; ½ HP, 125/250 VAC 15 A, 125/250 VAC; ½ HP, 125-250 VAC 21 A, 250 VAC; 1 HP, 125 VAC; 2 HP, 250 VAC UL file number E314201 Environmental and Mechanical Specifications -40 OC to 85, 125 or 150 OC (-40 OF to 185 , 257 or 302 OF) UL 94V-0 Operating Temperature Flammability Rating Operating life – electrical life at rated load, 85 OC Contact EN61058 1 50,000 2 50,000 3 50,000 4 50,000 5 50,000 7 10,000 UL10544 6,000 6,000 6,000 6,000 6,000 6,000 4 Extended life available Material Specifications Case Cover Actuating Button Contacts Terminals Auxiliary Actuator Moving Blade Thermoplastic Polyester PET Thermoplastic Polyester PET Thermoplastic Acetyl (POM) 85 OC, Thermoplastic Polyester (PET) 125 or 150 OC Gold Cross Point (D41), Silver (D42), Silver Alloy (D43-D48) Brass Stainless Steel or Cold-Rolled Steel (Nickel Plated) Silver Plated Brass Environmental Specifications -40 OC to 85 OC/120 OC (-40 OF to 185 OF/248 OF) 70 – 280 cN (model dependent, without actuator) 1.6 mm IP50 Ambient Temperature Operating Force Total Travel Ingress Protection Dimensions mm (inches) and terminal configurations Actuators * Connector part #823-0518 (mates with Y5 only); housing for RAST 5 QC terminals www.cherryswitches.com Page 2 of 2, Last update 2016-02-09, Specifications subject to change without notice.