BOARDCOM ACPM-9011-TR1 Power amplifier module Datasheet

ACPM-9011
LTE Band 11/B21 GPIO APT PA
2.0 mm × 2.5 mm
Power Amplifier Module
Product Brief
Description
Features
The ACPM-9011 is a fully matched 10-pin surface mount power
Amplifier Module developed for LTE Band11/21. It meets
stringent linearity power up to LTE (MPR=0 dBm) 27.5 dBm. The
2 mm × 2.5 mm form-factor package is self contained, and it
incorporates 50-ohm input and output matching networks.

The ACPM-9011 features CoolPAM circuit technology that
supports two power modes—low and high. The CoolPAM is a
stage bypass technology that enhances PAE (power added
efficiency) at low power range. The stage bypass feature
enhances PAE further at low output range, and it enables the
PA to have exceptionally low quiescent current. Without a
DC-DC converter, it dramatically saves average current
consumption, extends the talk time of mobiles, and prolongs
the battery life. It can be used with the APT (average power
tracking) operation to reduce the power consumption when
VCC1 is connected to the battery and VCC2 is connected to a
DC-DC converter, which adjusts the VCC2 voltage according to
the output power level.
A directional coupler is integrated into the module, and both
coupling and isolation ports are available externally, which
support a daisy chain. The integrated coupler has excellent
coupler directivity, which minimizes the coupled output power
variation or delivered power variation caused by a load
mismatch from the antenna.
Thin package (0.93 mm typical)
Excellent Linearity in APT mode
Two-mode power control with Vmode
Compatible with the APT application
High efficiency at maximum output power
Ten-pin surface mounting package
Internal 50-ohm matching networks for both RF input and
output
Integrated coupler
— Coupler and isolation ports for daisy chain
Green – Lead-free and RoHS compliant








Applications
LTE Band 11
LTE Band 21


Ordering Information
Part Number
ACPM-9011-TR1
The power amplifier is manufactured on an advanced InGaP
HBT (hetero-junction bipolar transistor) MMIC (microwave
monolithic integrated circuit) technology that offers
state-of-the-art reliability, temperature stability, and
ruggedness.
Avago Technologies
-1-
Number of
Devices
1,000
Container
178 mm (7 in.) tape/reel
ACPM-9011
Product Brief
Package Dimensions
Package Dimensions
The dimensions are in millimeters.
1JO.BSL
œ
œ
œ
Marking Specification
1JO.BSL
111 1
'==
̻
%o%BUF$PEF
;;o"TTFNCMZ-PU*EFOUJGJDBUJPO
o%FWJDF$PEF
Avago Technologies
-2-
Pin Description
Pin #
Name
Description
1
VCC1
DC supply voltage, connect to bias circuitry with a fixed voltage (higher than 3.2V)
2
RFIN
RF input
3
NC
NC
4
Vmode
Mode control
5
Ven
PA enable
6
CPL
Coupling port of the coupler
7
GND
Ground
8
ISO
Isolation port of the coupler
9
RFOUT
RF output
10
VCC2
DC supply voltage, connect to the RF stages' collector to which APT is applied (0.5V~3.5V)
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the
United States and other countries. All other brand and product names may be trademarks of
their respective companies.
Data subject to change. Copyright © 2015 Avago Technologies. All Rights Reserved.
AV02-4838EN – 2015-03-24
Similar pages