SMD B EAST1608AA1 Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. ․Compliance with EU REACH. ․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm) Description ․The SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Device Selection Guide Chip Materials AlGaInP Emitted Color Resin Color Reddish Water Clear Orange Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V IF 25 mA IFP 60 mA Power Dissipation Pd 60 mW Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge ESDHBM 2000 V Soldering Temperature Tsol Forward Current Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 72.0 ----- 180.0 mcd Viewing Angle 2θ1/2 ----- 100 ----- deg Peak Wavelength ----- 611 ----- nm 600.5 ----- 612.5 nm Spectrum Radiation Bandwidth λ p λ d △λ ----- 17 ------ nm Forward Voltage VF 1.75 ---- 2.35 V Reverse Current IR ----- ----- 10 μA Dominant Wavelength Condition IF=20mA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1 2 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Bin Range of Luminous Intensity Bin Code Min. Max. Q1 72.0 90.0 Q2 90.0 112.0 R1 112.0 140.0 R2 140.0 180.0 Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Unit Condition V IF =20mA Bin Range Of Dom. Wavelength Bin Code Min. Max. D8 600.5 603.5 D9 603.5 606.5 D10 606.5 609.5 D11 609.5 612.5 Bin Range Of Forward Voltage Bin Code Min. Max. 0 1.75 1.95 1 1.95 2.1 2 2.1 2.3 Note: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Dominant Wavelength ±1nm 3. Tolerance of Forward Voltage: ±0.1 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Typical Electro-Optical Characteristics Curves 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Package Outline Dimensions Cathode mark Note: Tolerances unless mentioned ±0.1mm. Unit = mm 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label 7 Aluminum moisture-proof bag Desiccant Label Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within 168 hours (7days) after opening the package . If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com DATASHEET SMD B EAST1608AA1 Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight Americas before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 9 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 18-Apr-2006. .Issue No: 1 www.everlightamericas.com