DS-DSS-313
Two-Way Power Divider
10-2000MHz
Rev. V3
FP-2 (DS-313)
Features
Fully Hermetic Package
Loss: 0.6 dB Typical Mid-band
Isolation: 28 dB Typical Mid-band
VSWR: 1.2:1 Typical Mid-band
Impedance: 50 Ohms Nominal
Maximum Power Rating or Input Power: 250 mW
Max.
Internal Load Dissipation: 50 mW Max.
MIL-STD-202 Screening Available
Description
A Power Divider is ideally a lossless reciprocal
device which can also perform vector summation of
two or more signals and thus is sometimes called a
power combiner or summer.
Pin Configuration (DS-313)
Pin No.
Function
Pin No.
Function
1
5
GND
2
GND
6
GND
3
GND
7
GND
4
Output C
8
Output D
SF-1 (DSS-313)
Ordering Information
Part Number
Package
DS-313 PIN
FP-2
DSS-313 PIN
SF-1
Pin Configuration (DSS-313)
1
Pin No.
Function
Pin No.
Function
1
3
GND
2
Output C
4
Output D
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DS-DSS-313
Two-Way Power Divider
10-2000MHz
Rev. V3
DS-313 Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
Less Coupling
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
dB
dB
dB
—
—
—
—
—
—
1.1
1.3
1.8
Isolation
—
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
dB
dB
dB
23
18
12
—
—
—
—
—
—
Amplitude Balance
—
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
dB
dB
dB
—
—
—
—
—
—
0.3
0.4
0.6
Phase Balance
—
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
°
°
°
—
—
—
—
—
—
4
6
8
VSWR
All Ports
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
Ratio
Ratio
Ratio
—
—
—
—
—
—
1.5:1
1.6:1
1.8:1
DSS-313 Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ.
Max
Insertion Loss
Less Coupling
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
dB
dB
dB
—
—
—
—
—
—
1.1
1.3
1.8
Isolation
—
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
dB
dB
dB
22
18
12
—
—
—
—
—
—
Amplitude Balance
—
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
dB
dB
dB
—
—
—
—
—
—
0.3
0.4
0.6
Phase Balance
—
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
°
°
°
—
—
—
—
—
—
5
8
11
VSWR
All Ports
20 - 1000 MHz
10 - 1500 MHz
1500 - 2000 MHz
Ratio
Ratio
Ratio
—
—
—
—
—
—
1.5:1
1.6:1
1.8:1
1. All specifications apply with 50 ohm source and load impedance.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DS-DSS-313
Two-Way Power Divider
10-2000MHz
Rev. V3
Typical Performance Curves
Isolation - Ports C-D
Insertion Loss - Ports -C, D
40
Isolation (dB)
Insertion Loss (dB)
1.200
1.000
0.800
0.600
0.400
30
20
10
0
0.200
0
0.000
0
0.01 0.03 0.1
0.3
1
1.2
1.4
1.6
1.8
2
2.2
0.01 0.03 0.1 0.3
1
1.2
1.4
1.6
1.8
2
2.2
F requency (GH z)
F re que nc y ( G H z)
VSWR
E Po r t
C , D Po r t s
1.8
VSWR
1.6
1.4
1.2
1
0
0.01 0.03 0.1
0.3
1
1.2
1.4
1.6
1.8
2
2.2
F re que nc y ( G H z)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DS-DSS-313
Two-Way Power Divider
10-2000MHz
Rev. V3
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support