CGD3.5K SERIES PURE-SINEWAVE DC-AC INVERTERS » INCLUDES BUILT-IN AUTOMATIC TRANSFER SWITCH (ATS) WITH AC INPUT CIRCUIT BREAKER » PARALLELABLE FOR INCREASED POWER » 3 PHASE WYE CONFIGURABLE » 120/240 CT SPLIT PHASE CONFIGURABLE 3500W / 3500VA 12 V, 24 V, 48 V INPUT SIX MODELS FOR 110V 50/60 Hz & 220V 50/60 Hz OUTPUT APPLICATIONS Nova Electric’s CGD-Series inverters are intended for commercial and industrial applications wherever pure sinewave power is needed at 50 or 60 Hz. These inverters are ideal for running electronic loads such as computers, monitors, printers, telecom systems, radios, fluorescent lamps from batteries, field generators, and solar electro-voltaic panels. They can also drive hand drills, motors and small compressors – please consult the factory for proper sizing. These CGD models can also be optionally ruggedized against shock, vibration, and humidity for military applications including vehicle mounted, shipboard, submarine, aircraft, and ground fixed shelters. q COMPUTERS q SAIL BOATS q APPLIANCES q PRINTERS q PHOTO VOLTAIC q INSTRUMENTS q MONITORS q ELECTRIC TOOLS q RVs For more information, please visit us at www.novaelectric.com or email us at [email protected] STANDARD FEATURES ELECTRICAL SAFETY & EMC Input Voltage: See Table accurate and stable frequency. Output Voltage 110V model: 100/110/120 VAC Compact and light weight, yet rugged and Output Voltage 220V model: 220/230/240 VAC Output Frequency: 50 or 60 HZ ±0.1% Accuracy vehicle rated. Tightly regulated output voltage and frequency Continuous Power Rating: 3500W/3500VA Switch selectable 50 or 60 Hz output, all models Peak Power (3 seconds): 4500W Surge Rating: 6000W < 0.2 seconds Capable of driving highly reactive loads such as Efficiency: 90% (12V, 24V/120), 91% (24V/220, 48V) electric tools and appliances. Output Waveform Sinewave: <3% THD Capable of driving highly capacitive loads such Output Voltage Regulation: ±3% as switching power supplies. Protection: Overload, Short Circuit, Reverse Polarity Very low harmonic distortion (Fuse), O.T, Over/Under Input Voltage, Fan Failure Suitable for vehicle or wall mounting Output Frequency Regulation: ±0.1% Synchronous Frequency: 47-57 / 53 - 63 Hz Standard outputs 110V/60Hz, 230V/50Hz ATS: Inverter to utility AC: 8 ~ 10ms. Switch selectable ±10V output change Utility AC to inverter: 16 ~ 50 ms. RS-232 communication (RJ11 Connector) Built in mechanical transfer switch (ATS) 120V: UL458*; FCC Class B 220V: EN60950-1; EN55014-1**, EN55014-2**; EN61000-3-2, -3-3; EN61204-3; EN61000-6-1, -6-2, -6-3, -6-4; IEC61000-4-2, 3,4,5,6,8,11 12V - 120V 24V - 120V 48V - 120V 12V - 220V 24V - 220V 48V - 220V @12VDC @24VDC @48VDC @12VDC @24VDC @48VDC 1.4A <2.9A 0.5A <1.4A 0.5A <0.8A 1.4A <3.6A 0.5A <1.8A 0.5A <1A • Microprocessor based design with absolutely • • • • • • • • • • • No Load Power Consumption On Mode @ Save Mode On Mode @ No Load Mode ENVIRONMENTAL • Operating Temp.: -20° to +40°; + 60°C @ 40% Pwr Load • Storage Temp. Range: -40° to +71°C • Humidity: To 90% non-condensing INDICATORS, CONTROL & COMMUNICATIONS • Input level, Fault Status • Optional Remote Control • Optional Ethernet Communications * UL-458 only support CGD2500W-12-120 and CGD2500W-24-120 ** EN55014-1, EN55014-2 Class B: output cable less than 6.5 ft (2 meters) Fuse 40A x 12 20A x 12 20A x 6 40A x 12 20A x 12 20A x 6 BAT. Low Alarm ±3% 10.5 VDC 21.0 VDC 42.0 VDC 10.5 VDC 21.0 VDC 42.0 VDC BAT. Low Shut-down ±3% 10.0 VDC 20.0 VDC 40.0 VDC 10.0 VDC 20.0 VDC 40.0 VDC BAT. Low Restart ±3% 12.5 VDC 25.0 VDC 50.0 VDC 12.5 VDC 25.0 VDC 50.0 VDC BAT. High Alarm ±3% 15.5 VDC 31.0 VDC 62.0 VDC 15.5 VDC 31.0 VDC 62.0 VDC BAT. High Shut-down ±3% 16.0 VDC 32.0 VDC 64.0 VDC 16.0 VDC 32.0 VDC 64.0 VDC BAT. High Restart ±3% 15.0 VDC 30.0 VDC 60.0 VDC 15.0 VDC 30.0 VDC 60.0 VDC MODEL SELECTION INPUT VDC 120 V MODELS 50 Hz or 60 Hz 220 V MODELS 50 Hz or 60 Hz DIMENSIONS (L” x W” x H”) [mm] WEIGHT 10 - 16 V CGD3.5K-12-120 CGD3.5K-12-220 19.53 x 11.14 x 5.04 [496 x 283 x 128] 22 lbs [10 kg] 20 - 32 V CGD3.5K-24-120 CGD3.5K-24-220 19.53 x 11.14 x 5.04 [496 x 283 x 128] 22 lbs [10 kg] 40 - 60 V CGD3.5K-48-120 CGD3.5K-24-220 19.53 x 11.14 x 5.04 [496 x 283 x 128] 22 lbs [10 kg] MECHANICAL SPECIFICATIONS GROUND NOVA ELECTRIC Leader in power conversion technology since 1966 AS 9100 Certificate No: US008267-1