ETC2 AL55CCW Lock kit for cla mp cover junction box Datasheet

Locks, Lockouts, Latches, Handles and Clamps Locks
Accessories
Locks, Lockouts, Latches, Handles and Clamps
Locks
Spec-00479
G
763.422.2211
763.422.2600
Lock Kit for Clamp Cover Junction Boxes
L (in.)
1.25
Catalog Number
ACLJIC
L (mm)
32
Designed for field installation in standard clamp-cover junction
boxes. Includes complete installation instructions. One hole must
be drilled or punched in the cover to receive the cylinder lock.
Punches for Hoffman locks and latches are available from Greenlee
Punches. For more information on Greenlee punches, go to http://
www.greenlee.textron.com/
Bulletin: A80
Lock Kit for Type 3R and 12 Enclosures
Catalog Number
ACLSN12
L, for NEMA 12 Enclosure
in./mm
1.69
43
L, for Medium 3R Hinged-Cover Enclosure
in./mm
2.25
57
Designed for field installation in standard one-door Type 3R and 12
enclosures. Includes complete installation instructions. One hole
must be drilled or punched in the door to receive the cylinder lock.
Bulletin: A80
Padlock Kit for Junction Boxes
Designed for field installation on
standard LP, CH and CHNF junction
boxes. Maintains water-tight and
dust-tight seal. To install simply
drill two holes in the cover and two
holes in the body. Includes complete
instructions. Padlock Kit is plated
steel or Type 316 stainless steel.
Catalog Number
APLKJIC
APLKJIC6SS
Description
Plated steel
Type 316 stainless steel
Bulletin: A80
Replacement Keys
Fits PROLINE™ Network Cabinet
and Networking Wall-Mount
Cabinet.
Bulletin: DACCY
1
Accessories
Catalog Number
E2233KEY
E333KEY
SUBJECT TO CHANGE WITHOUT NOTICE
Key Code
2233
333
Includes
2 Keys
2 Keys
Use with
PROLINE™ , Net Series, PC Cabinet, SOHO
ACCESSPLUS™ II, L-BOX™ , D-BOX™
EQUIPMENT PROTECTION SOLUTIONS
Spec-00479 G
Locks, Lockouts, Latches, Handles and Clamps Lockouts
Safety Lockouts
Lockouts
Provide a means of using multiple
padlocks on a secured power
source. Catalog number ASL6C
includes a 10.00-in. (254-mm) plated
steel chain. Manufactured from 10
gauge steel with six station holes.
Red finish. Overall length is 5.06 in.
(128 mm) and padlock holes are .38in. (10-mm) in diameter.
Catalog Number
ASL6
ASL6C
Description
Without chain
With chain
Catalog Number
ASLDA
ASLDAC
Description
Without chain
With chain
Bulletin: A80
Dual-Access Safety Lockouts
Provide a means of using two
padlocks on a secured power
source. Either padlock can be
removed enabling power to be
interrupted and enclosure accessed.
Catalog number ASLDAC includes
a 10.00-in. (254-mm) plated steel
chain. Lockouts are manufactured
from 10 gauge steel and finished
in red. Padlock holes are .38-in.
(10-mm) in diameter. Padlock is not
included.
Bulletin: A80
EQUIPMENT PROTECTION SOLUTIONS
Spec-00479 G
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Accessories
2
Locks, Lockouts, Latches, Handles and Clamps Latches
T-Handle Latch and Keyed Cylinder Lock Kits
Latches
To install, simply remove the
standard slotted latch and insert
the kit. Complete installation
instructions are furnished. Catalog
number AL7A includes a Type L7 T
handle and all hardware. Catalog
number AL12AR includes a Type L12
cylinder lock, cam and all hardware.
Latch and lock fit Type 1 enclosures
and hinged-cover pull boxes.
Catalog Number
AL7A
AL12AR
Description
T handle latch kit
Cylinder lock kit
Bulletin: A80
Latch Kit for One-Door Type 12 Enclosures
Designed for field installation on most standard one-door Type
12 enclosures. These latch kits will not fit Hoffman disconnect,
CONCEPT™ or PROLINE™ enclosures. Each kit includes a handle,
latch, latch rods, adjustable rod guides and all hardware. The latch
rods can be adjusted to maintain the proper gasket compression by
relocating the pins in the rod guides. When the pin is removed, the
latch rod can also be removed. These kits are available with a key
locking handle, a non-locking handle or a padlocking handle. All
openings through the door are gasketed to assure a complete seal.
Ends of latch rods have rollers for easier door closing.
Bulletin: A80
Catalog
Number
AL36A
Handle
Type
Padlock
AL2A
AL2ACCW
AL3A
AL36BR
Keylock
Keylock
NonLocking
Padlock
AL2BR
Keylock
Either Clockwise or
Counterclockwise
Clockwise
AL2BCCW
Keylock
Counterclockwise
AL3BR
NonLocking
Padlock
Clockwise
AL36CR
AL2CR
AL2CCCW
AL3CR
AL36DR
AL2DR
AL2DCCW
AL3DR
Keylock
Keylock
NonLocking
Padlock
Keylock
Keylock
NonLocking
Opens
Either Clockwise or
Counterclockwise
Clockwise
Counterclockwise
Clockwise
Either Clockwise or
Counterclockwise
Clockwise
Counterclockwise
Clockwise
Either Clockwise or
Counterclockwise
Clockwise
Counterclockwise
Clockwise
Description
1-point Latch kit
1-point Latch kit
1-point Latch kit
1-point Latch kit
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 60 or 72 in.
3-point Latch kit where A is 60 or 72 in.
3-point Latch kit where A is 60 or 72 in.
3-point Latch kit where A is 60 or 72 in.
See price list for factory installation charges. A is enclosure height.
Latch Kits for Type 4 and 12 Enclosures
Fits Type 4 and 12 enclosures which have external screw clamps.
Requires only a quarter-turn (90 degrees) to open or close. An
internal O-ring and external gasket assure a water-tight and dusttight seal. Installation requires a hole punched or drilled in the
door for each latch. Complete instructions are furnished. A square
or triangular key is required for tamper-resistant latches. Latch is
die-cast zinc with chrome finish.
Bulletin: A80
Catalog Number
AL31
AL32
AL32Y
AL35
AL35Y
Description
Slotted insert
7-mm square insert
Key for AL32
7-mm triangle insert
Key for AL 35
Toggle Latch for Type 4 and 4X Floor-Mount and Free-Stand Enclosures
Provides quick access to Type
4 and 4X floor-mount and freestand enclosures with clamps. The
3/8-16 threaded, stainless steel
toggle latches replace the standard
stainless steel bolts. Operation of
the toggle releases the door clamp
so the door can be opened without
tools. Two Type 316 stainless steel
toggle assemblies included.
Catalog Number
AFT44XSS
Description
2 toggle latches
Bulletin: A80
3
Accessories
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS
Spec-00479 G
Locks, Lockouts, Latches, Handles and Clamps Handles
POWERGLIDE™ Handles
Handles
Easy-to-install medium-size
POWERGLIDE Handles fit into
existing handle holes. They are
available in clockwise and counterclockwise non-defeater models and
a clockwise defeater model. The
clockwise defeater model includes
door hardware for Bulletin A25
enclosures.
Catalog Number
AL55CW
AL55CCW
AL55CWD
Description
Medium POWERGLIDE Handle - Clockwise Opening
Medium POWERGLIDE Handle - Counter-Clockwise Opening
Medium POWERGLIDE Handle - Clockwise Opening with Defeater and Door Hardware
Catalog Number
DHDLK
Description
Handle kit
Bulletin: A80
Handle Kit
Non-metallic handle for small
enclosures. Includes four rubber
bumpers that mount on back of
enclosure to protect exterior
finish. All mounting hardware and
complete installation instructions
are provided.
Bulletin: A80
Handles
Attach to sides of enclosure to provide maximum operator control
when using a pendant arm, swivel or swivel tilt.
Bulletin: C2, CC1, CC2, DEC1, P1
Catalog Number
ERCFH3U
ERCFH4U
ERCFH6U
PUHKA
PUHK
Locking T Handle
Description
132 mm
177 mm
266 mm
248 mm
9.75 in.
Fits
Desktop case
Desktop case
Desktop case
PROLINE sloped fronts
PROLINE sloped fronts
Optional locking T-Handle available for replacement of the quarterturn latch (order separately).
Bulletin: T90R3
Catalog Number
ALTC3R
EQUIPMENT PROTECTION SOLUTIONS
Spec-00479 G
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Description
Available for replacement of the quarter-turn latch
Accessories
4
Locks, Lockouts, Latches, Handles and Clamps Clamps
Fast-Operating Clamp-Cover Junction Box Clamp
Clamps
Provides quick access to enclosure
or wireway interiors. Installs on
standard clamp bracket used on
Hoffman junction boxes, Type
12 trough and wireway, Type
4X wireway and similar custom
enclosures. Clamps are available in
plated steel or stainless steel.
Catalog Number
AL23
AL23SS
Description
Plated steel clamp
Stainless steel clamp
Catalog Number
AFC412SS
Qty.
2
Bulletin: A80
Fast-Operating Clamp Assembly
Provides quick access to enclosures
which have screw clamps. Install on
clamp brackets used on single-door
Type 4, 4X, 12 and 13 enclosures and
similar custom order enclosures.
The entire clamp assembly is Type
316 stainless steel.
Bulletin: A80
Clamp Kits
These kits provide replacement
clamps for clamp-cover junction
boxes and wall-mount enclosures.
Each kit contains two clamps and all
mounting hardware.
Bulletin: A80
Clamp Block Kit
Used on floor-mount and free-stand
Type 4X stainless steel enclosures
with clamps. Kit includes two sets of
screws, two Type 316L clamp blocks
and mounting hardware.
Catalog Number
AL15
AL16
AL17
AL18
Catalog Number
ACBK6SS
Material
Mild Steel
Stainless Steel
Mild Steel
Stainless Steel
Use with
A12 enclosures
A4, A4S enclosures
A51 junction boxes
A51S junction boxes
Description
2 clamp blocks and screw sets
Bulletin: A50Y
5
Accessories
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS
Spec-00479 G
Locks, Lockouts, Latches, Handles and Clamps Clamps
Notes
EQUIPMENT PROTECTION SOLUTIONS
Spec-00479 G
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Accessories
6
Similar pages