SICK C2C-EA03030A10000 Safety light curtain Datasheet

Online data sheet
C2C-SA03030A10000, C2C-EA03030A10000
deTec2 Core
SAFETY LIGHT CURTAINS
C2C-SA03030A10000, C2C-EA03030A10000 | deTec2 Core
SAFETY LIGHT CURTAINS
A
B
C
D
E
F
Ordering information
System part
Type
Part no.
Sender
C2C-SA03030A10000
1213200
C2C-EA03030A10000
1213184
Receiver
Other models and accessories
www.sick.com/deTec2_Core
Detailed technical data
Features
H
I
J
K
L
M
N
O
P
Q
R
S
T
System part
Sender/receiver pair with QuickFix bracket
Resolution
30 mm
Protective field height
300 mm
Scanning range
Minimum 0 m ... 10 m
Typical 0 m ... 12 m
Response time
10 ms
Synchronization
Optical synchronisation
Safety-related parameters
Type
Type 2 (IEC 61496)
Safety integrity level
SIL1 (IEC 61508)
SILCL1 (EN 62061)
Category
Category 2 (EN ISO 13849)
Performance level
PL c (EN ISO 13849)
PFHD (mean probability of a dangerous failure per hour)
3.1 x 10-8 (EN ISO 13849)
TM (mission time)
20 years (EN ISO 13849)
Safe state in the event of a fault
At least one OSSD is in the OFF state.
Interfaces
System connection
Connection type Male connector M12, 5-pin
Permitted cable length ≤ 50 m
Fieldbus, industrial network
Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 1)
1)
2
For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
Online data sheet | 2017-06-21 19:55:04
Subject to change without notice
C2C-SA03030A10000, C2C-EA03030A10000 | deTec2 Core
SAFETY LIGHT CURTAINS
Electrical data
Protection class
III (EN 50178)
Supply voltage VS
24 V DC (19.2 V ... 28.8 V)
Ripple
≤ 2.4 Vpp 1)
Power consumption typical
1.63 W (DC) / 0.82 W (DC) (depending on type)
Safety outputs (OSSD)
Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 2)
Switching voltage HIGH 24 V DC (VS – 2.25 V DC ... VS)
Switching voltage LOW ≤ 2 V DC
Switching current ≤ 300 mA
1)
2)
Within the limits of VS.
Applies to the voltage range between –30 V and +30 V.
Mechanical data
Housing cross-section (incl. system connection)
34 mm x 30.7 mm
Housing material
Aluminum extruded profile
Weight
300 g / 290 g (depending on type)
Ambient data
Enclosure rating
IP65 (EN 60529)
IP67 (EN 60529)
Ambient operating temperature
–30 °C ... +55 °C
Storage temperature
–30 °C ... +70 °C
Air humidity
15 % ... 95 %, Non-condensing
Vibration resistance
5 g, 10 Hz ... 55 Hz (EN 60068-2-6)
Shock resistance
10 g, 16 ms (EN 60068-2-29)
Other information
Wave length
850 nm
Classifications
ECl@ss 5.0
27272704
ECl@ss 5.1.4
27272704
ECl@ss 6.0
27272704
ECl@ss 6.2
27272704
ECl@ss 7.0
27272704
ECl@ss 8.0
27272704
ECl@ss 8.1
27272704
ECl@ss 9.0
27272704
ETIM 5.0
EC002549
ETIM 6.0
EC002549
UNSPSC 16.0901
46171620
2017-06-21 19:55:04 | Online data sheet

Subject
to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
3
C2C-SA03030A10000, C2C-EA03030A10000 | deTec2 Core
SAFETY LIGHT CURTAINS
Dimensional drawing (Dimensions in mm (inch))
21.1
(0.83)
13
56.8
(0.51)
(2.24)
30.7
(1.21)
29.5
L
(1.16)
L
A
B
C
D
E
F
34
30.7
(1.21)
6.3
(0.25)
(4.2)
106.8
21.8
(0.86)
30
5
(0.2)
56.8
13.8
(2.24)
14
(0.55)
(0.54)
L=150 (5.91)
1
4
4
(0.16)
56.8
(2.24)
H
I
J
K
L
M
N
O
P
Q
R
S
T
(1.18)
(1.34)
7
(0.28)
4
12
(0.47)
2
5
Protective field height
L
300 (11.81)
313 (12.32)
450 (17.72)
463 (18.23)
600 (23.62)
613 (24.13)
750 (29.53)
763 (30.04)
900 (35.43)
913 (35.94)
1,050 (41.34)
1,063 (41.85)
1,200 (47.24)
1,213 (47.76)
1,350 (53.15)
1,362 (53.62)
1,500 (59.06)
1,512 (59.53)
1,650 (64.96)
1,662 (65.43)
1,800 (70.87)
1,812 (71.34)
1,950 (76.77)
1,962 (77.24)
2,100 (82.68)
2,112 (83.15)
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
3
Online data sheet | 2017-06-21 19:55:04
Subject to change without notice
C2C-SA03030A10000, C2C-EA03030A10000 | deTec2 Core
SAFETY LIGHT CURTAINS
Connection diagram
deTec2 Core safety light curtain connected to UE48-2OS safety relay
24 V DC
1 +24V
2 n.c.
3
OSSD1
2
GND 3
GND
4 n.c.
5
+24V 1
OSSD2 4
n.c.
n.c.
5
S1
S33 S11 S12 S31 A1
k1
k2
13 23
31
14 24
32
UE48-2OS2D2
S34 S35 S21 S22 A2
K1
K2
0 V DC
E114585/01/2014-05-08
Task
Connection of a deTec2 Core safety light curtain to UE48-2OS.
Operating mode: with restart interlock and external device monitoring.
Function
When the light path is clear, the OSSD1 and OSSD2 outputs are live. The system is ready to switch on if K1 and K2 are de-energized. By pressing S1 (button is pressed and released), the UE48-2OS is energized and its 13 - 14 and 23 - 24 contacts activate K1
and K2. On interruption of one of the light beams, the UE48-2OS is de-energized by the OSSD1 and OSSD2 outputs and K1 and K2
are deactivated.
Fault analysis
OSSD cross-circuits and short-circuits are detected and lead to the inhibited state (lock-out). The incorrect functioning of one of the
K1 or K2 contactors will be detected and does not result in the loss of the shutdown function. Jamming of the S1 button will prevent the UE48-2OS from enabling.
Comments
1)
Output circuits: These contacts are to be connected to the controller such that, with the output circuit open, the dangerous state
is disabled. For categories 4 and 3, the integration must be dual-channel (x/y paths). Single-channel integration in the control (z
path) is only possible with a single-channel control and by taking the risk analysis into account.
2017-06-21 19:55:04 | Online data sheet

Subject
to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
5
Online data sheet
SICK at a glance
SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity.
For us, that is “Sensor Intelligence.”
Worldwide presence:
Contacts and other locations – www.sick.com
SICK AG | Waldkirch | Germany | www.sick.com
Similar pages