Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to [email protected]. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FAN53525 3.0A, 2.4MHz, Digitally Programmable TinyBuck® Regulator Features Description Fixed-Frequency Operation: 2.4 MHz The FAN53525 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5 V to 5.5 V. The output voltage is programmed through an I2C interface capable of operating up to 3.4 MHz. Programmable Slew Rate for Voltage Transitions Best-in-Class Load Transient Continuous Output Current Capability: 3.0 A 2.5 V to 5.5 V Input Voltage Range Digitally Programmable Output Voltage: - 0.600 V to 1.39375 V in 6.25 mV Steps I2C-Compatible Interface Up to 3.4 Mbps PFM Mode for High Efficiency in Light Load Quiescent Current in PFM Mode: 50 µA (Typical) Input Under-Voltage Lockout (UVLO) Thermal Shutdown and Overload Protection 15-Bump Wafer-Level Chip Scale Package (WLCSP) Applications Application, Graphic, and DSP Processors ARM™, Tegra™, OMAP™, NovaThor™, ARMADA™, Krait™, etc. Hard Disk Drives, LPDDR3 Using a proprietary architecture with synchronous rectification, the FAN53525 is capable of delivering 3.0 A continuous at over 80% efficiency, maintaining that efficiency at load currents as low as 10 mA. The regulator operates at a nominal fixed frequency of 2.4 MHz, which reduces the value of the external components to 330 nH for the output inductor and as low as 20 µF for the output capacitor. Additional output capacitance can be added to improve regulation during load transients without affecting stability, allowing inductance up to 1.2 µH to be used. At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate in Power-Save Mode with a typical quiescent current of 50 µA at room temperature. Even with such a low quiescent current, the part exhibits excellent transient response during large load swings. At higher loads, the system automatically switches to fixed-frequency control, operating at 2.4 MHz. In Shutdown Mode, the supply current drops below 1 µA, reducing power consumption. PFM Mode can be disabled if fixed frequency is desired. The FAN53525 is available in a 15-bump, 1.310 mm x 2.015 mm, 0.4 mm ball pitch WLCSP. Tablets, Netbooks, Ultra-Mobile PCs Smart Phones Gaming Devices All trademarks are the property of their respective owners. Figure 1. © 2012 Fairchild Semiconductor Corporation FAN53525 • Rev. 1.0.1 Typical Application www.fairchildsemi.com FAN53525 — 3.0 A, 2.4 MHz, Digitally Programmable TinyBuck® Regulator July 2014 Part Number Power-Up Defaults DVS Range / Step Size Max. RMS Temperature Package Current Range Packing Method VSEL0 VSEL1 FAN53525UC96X 1.20 1.225 0.600 V to 1.39375 V / 6.25 mV 3.0 A -40 to 85°C WLCSP Tape & Reel FAN53525UC48X 0.9 1.225 0.600 V to 1.39375 V / 6.25 mV 3.0 A -40 to 85°C WLCSP Tape & Reel Recommended External Components Table 1. Recommended External Components for 3.0 A Maximum Load Current Component Description L1 470 or 330 nH, 2016 Case Size COUT 22 F, 6.3 V, X5R, 0603 C1608X5R0J226M (TDK) C 22 CIN 1 Piece; 4.7 F, 10 V, X5R, 0603 C1608X5R1A475K(TDK) C 4.7 Table 2. Vendor Parameter Typ. Unit See Table 2 µF Recommended Inductors Component Dimensions DCR (mΩ Typ.) IMAXDC Manufacturer Part# L (nH) Toko DFR201612 C-R33N 330 23 Toko DFE201612 C-R47N 470 40 (1) L W H 4.2 2.0 1.6 1.2 3.2 2.0 1.6 1.2 Cyntek PIFE20161B-R47MS-39 470 30 3.1 2.0 1.6 1.2 SEMCO CIGT201610UMR47MNE 470 30 4.0 2.0 1.6 0.9 SEMCO CIGT201210UMR47MNE 470 33 3.0 2.0 1.2 0.9 Note: 1. IMAXDC is the lesser current to produce 40°C temperature rise or 30% inductance roll-off. © 2012 Fairchild Semiconductor Corporation FAN53525 • Rev. 1.0.1 www.fairchildsemi.com 2 FAN53525 — 3.0 A, 2.4 MHz, Digitally Programmable TinyBuck® Regulator Ordering Information 0.03 C 2X A E 0.80 B 0.40 F A1 BALL A1 INDEX AREA D 1.60 0.40 (Ø0.200) Cu Pad (Ø0.300) Solder Mask Opening 0.03 C 2X RECOMMENDED LAND PATTERN (NSMD TYPE) TOP VIEW 0.06 C 0.378±0.018 0.208±0.021 0.625 0.547 0.05 C C Seating Plane D SIDE VIEWS NOTES A. NO JEDEC REGISTRATION APPLIES. B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCE PER ASME Y14.5 - 2009. D. DATUM C IS DEFINED BY THE SPHERICAL CROWNS OF THE BALLS. E. PACKAGE NOMINAL HEIGHT IS 586 ± 39 MICRONS (547-625 MICRONS). F. FOR DIMENSIONS D,E,X, AND Y SEE PRODUCT DATASHEET. G. DRAWING FILNAME: MKT-UC015AB Rev1 0.80 Ø0.260±0.02 15X 0.40 0.005 E D C B A 0.40 1.60 C A B (Y)±0.018 F 1 2 3 (X)±0.018 BOTTOM VIEW Figure 39. 15-Ball, Wafer-Level Chip-Scale Package (WLCSP), 3x5 Array, 0.4 mm Pitch, 250 µm Ball Product-Specific Dimensions D E X Y 2.015 ±0.03 mm 1.310 ±0.03 mm 0.255 mm 0.2075 mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/UC/UC015AB.pdf. © 2012 Fairchild Semiconductor Corporation FAN53525 • Rev. 1.0.1 www.fairchildsemi.com 21 FAN53525 — 3.0 A, 2.4 MHz, Digitally Programmable TinyBuck® Regulator Physical Dimensions FAN53525 — 3.0 A, 2.4 MHz, Digitally Programmable TinyBuck® Regulator © 2012 Fairchild Semiconductor Corporation FAN53525 • Rev. 1.0.1 www.fairchildsemi.com 22 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com