7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER B NON-CRIMP HEIGHT ADJUST 2150057 -7 B FINE CRIMP HEIGHT ADJUST 4.57 mm [.180] TERMINAL APPLICATION SPECIFICATION n (A)114-5119 (2)0.75mm2 1.25mm2 (2)0.5mm2 0.75mm2 B 4 4 SERVO LATCH PLATE 11 NONE - - PNEUMATIC FEED - 2119951-1 - 1901697-1 2161326-1 8- 2150057 -5 - - 8- 2150057 -4 - 2119950-1 - 2119792-2 - - - - - - - - - - - - - - 2119641-1 - - - - - - - - 2168400-7 - (QUANTITY 2) - - 2063440-1 - - - 6 TE TERMINAL C1__DWG_PN_1_0 (A) 2-175022-1 C1__DWG_PN_1_1 2.20-3.40 mm [.087-.134 IN] - - C1__DWG_PN_2_0 - C1__DWG_PN_2_1 TE TERMINAL C1__DWG_PN_3_0 (B) 175164-1 C1__DWG_PN_3_1 TE TERMINAL 6 C1__DWG_PN_4_0 (C) 179974-1 C1__DWG_PN_4_1 C1__DWG_PN_1_2 12 CRIMP HEIGHT REFERENCE SETTING CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 1.82+/-0.05 [.072+/-.002] 1.82+/-0.05 [.072+/-.002] 1.62+/-0.05 [.064+/-.002] 1.55+/-0.05 [.061+/-.002] 1.50+/-0.05 [.059+/-.002] RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 9 6 5.9 W1__FA_SETTING_1 5.9 W1__FA_SETTING_2 7.9 W1__FA_SETTING_3 8.6 W1__FA_SETTING_4 9.1 W1__FA_SETTING_5 *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- 6 7 2150057 -4 2150057 -5 2150057 -6 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 A 10 11 12 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 50 AND 62. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 37, 50 1 & 242. 1 GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 & 252. 1 1 MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. WHEN ASSEMBLING -6 NON-CRIMP HEIGHT ADJUST APPLICATOR USE SHIM PACK 2119957-2 TO ALIGN APPLICATOR'S MAXIMUM WIRE CRIMP HEIGHT AT NORMAL TERMINATOR SHUT HEIGHT FEED ISSUES OR TERMINAL JAMMING MAY OCCUR IN THE PRE-FEED CONFIGURATION. CUT TO LENGTH AT ASSEMBLY. AMP 4805 REV 31MAR2000 A REVISIONS DIST 66 P LTR 7 - 1 1 - 1 1 -77 -7 -6 -5 -2 1 1 2119957-2 8-21084-0 APPLICATOR SHIM PACK O-RING, .676 ID, .070 DIA. MAT. PART NO DESCRIPTION 260 252 ITEM NO 1 1 - - - - 1 - - - - 1 - - - - 1 - 1 - 1 1 - 1 - 1 1 - - 1 - - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - - 2 2 - - - - 1 - - 1 1 - - REF REF - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - - - - 2 - 1 1 1 1 - REF REF REF REF - - - - 1 - - - - 1 - - REF REF - - 1 1 - 1 1 1 1 - 1 1 1 1 - 2 2 2 2 - 1 - - 1 - 2 2 2 2 - 1 1 1 1 - 2 2 2 2 - 1 - 1 1 - 3 - 3 3 - 1 1 1 1 - 3 3 3 3 - 2 2 2 2 - 2 2 2 2 - 2 2 2 2 - 2 2 2 2 - 1 1 1 1 - - - - 1 - 1 1 1 1 - - - - 1 - 1 1 1 1 - 1 - 1 1 - 1 1 1 1 - 1 - 1 1 - 1 - 1 1 - 1 1 1 1 - 1 1 1 1 - 1 - 1 1 - 7 7 7 7 - 2 2 2 2 - 2 2 2 2 - 1 1 1 1 - 2 2 2 2 - 1 1 1 1 - 1 1 1 1 - 2 2 2 2 - 1 1 1 1 - 2 2 2 2 - 4 4 4 4 - 1 1 1 1 - 1 1 1 1 - - - - - 1 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 1 - 1 1 1 1 1 1 1 1 1 DATE DWN APVD A RELEASE 24FEB2014 XZ GB B ECR-16-017695 15DEC2016 TB TE 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 2 1 2 1 3 1 3 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 7 2 2 1 2 1 1 2 1 2 4 1 1 1 1 1 1 1 1 1 1 1 -77 -7 -6 -5 -2 DIMENSIONS: mm & 4 of 4) 2119640-1 1803259-1 2119641-1 2119798-1 1-22279-3 2119759-1 2119082-9 2079764-1 2119083-1 2168400-7 2063440-1 2119740-2 1901697-1 6-993111-6 8-22280-7 1752353-2 1901680-2 21045-3 994969-1 994970-2 240638-1 3-23627-7 SEE NOTE 4 1633743-1 455888-5 2119956-2 2-18032-2 2119740-1 2168078-1 1901681-1 2168400-5 2119793-1 992763-5 2079383-4 2168400-4 2168083-8 5018030-2 5018030-1 986965-8 1-5018030-0 2119792-2 1-1752354-2 18023-9 2119655-5 2119369-1 2079383-7 2119645-1 2119957-1 2119644-2 2119085-1 2119092-1 1-18028-2 2168083-9 1-2168083-0 240639-1 1320906-1 1-1752371-7 240825-2 2-22281-3 1752373-4 1901259-6 1-2079383-1 1752360-1 240833-1 690482-4 4-1333219-0 1-2217206-0 7-240641-2 238009-1 2119582-3 1-455888-0 1-456422-5 1 PART NO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 DESCRIPTION - 10 1 4 SMART APPLICATOR - INSULATION DIAMETER RANGE (B)114-5146 (C)114-5195 TERMINALS APPLIED 2.00mm2 SERVO LATCH PLATE SERVO LATCH PLATE - "250" SERIES POSITIVE LOCK-EX RECEPTACLE 5.50-6.50 mm [.217-.256 IN] WIRE SIZE - LOC 1 PART NUMBERS REQUIRED TE CRIMP SPECIFICATION WIRE STRIP LENGTH (A) 175022-1 (C) 179974-6 CRIMP TOOLING KIT TE TERMINAL TERMINAL NAME: TE TERMINAL SET UP GAUGE 2119599-2 F F 2.79 mm [.110] TERMINAL DATA: 2 TYPE APPL INSTRUCTIONS 408-10390 C B CONVERT TO PNEUMATIC FINE CRIMP HEIGHT ADJUST 2150057 -6 SIZE 3 APPLICATOR STYLE CONVERSION CHART FEED TYPE FINE CRIMP HEIGHT ADJUST B 7- 2150057 -7 WIRE INSUL DESCRIPTION B 2150057 -5 CRIMP 4 20 REVISION 2150057 -2 APPLICATOR DATA 5 ALL RIGHTS RESERVED. PART NUMBER D 6 MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 02FEB2012 CHK 02FEB2012 APVD 02FEB2012 T.ELBIN S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 ITEM NO DESCRIPTION PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN X.ZHAO 250 249 248 247 246 245 244 243 242 240 238 213 183 177 176 175 174 172 166 164 163 137 135 133 82 71 70 67 66 65 64 63 62 60 57 56 55 54 53 52 51 50 49 46 44 41 40 39 38 37 35 33 31 29 27 25 24 23 22 20 18 17 13 11 10 9 8 7 5 4 3 2 1 PUSH ROD, AIR FEED BUSHING, FLANGED FEED CAM, AIR FEED DETENT PIN SPRING, COMPRESSION RAM, AMP STYLE, END FEED, NON-ADJUST CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SHCS, LOW HEAD, RoHS, M5 X 10 AIR FEED MODULE TAG,IDENTIFICATION FEED FINGER ASSEMBLY,EF PIN, SLOTTED SPRING 3.0 X 14.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER PIN, RETAIN, GRVD, 3/16 X .854 MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPACER, CRIMPER DOCUMENTATION PACKAGE SCR, SET, FLT POINT M3 X 10.0 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 HOLDDOWN, TERMINAL SHCS, LOW HEAD, RoHS, M4 X 20 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, BHSC, RoHS (M4 X 8) SHCS, LOW HEAD, RoHS, M4 X 8 SCR, SKT HD CAP, RoHS, M4 X 16 NUT, HEX, REG, RoHS, M4 NUT, HEX, REG, RoHS, M3 NUT, LOCK, HEX, TORQUE (M4) NUT, HEX, REG, RoHS, M3.5 PAWL, EF, AIR STANDOFF,HOLD-DOWN SCR, SKT HD CAP M4 X 6.0 APPLICATOR BASIC ASSEMBLY, EF RAM,AMP STYLE, END FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION FA HEAD, ATLANTIC STYLE BOLT, ADJUSTMENT WASHER, FLAT, REG M4 SCR, SKT HD CAP, RoHS, M4 X 20 SCR, SKT HD CAP, RoHS, M4 X 10 STRIPPER (MACHINING) STUD, THREADED PLATE, STRIP GUIDE PLATE, STRIP HOLD DOWN SPRING, COMPRESSION DRAG GUIDE, LOWER STRIP SCR, BHSC, RoHS (M6 X 12) SPACER,HOLD-DOWN PLATE, REAR SHEAR PLATE, FRONT SHEAR ANVIL, COMBINATION BLADE, SLUG SPACER BLOCK, FL CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean End Feed Applicator - DRAWING NO 2150057 SCALE 1:1 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV B D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC REVISIONS DIST A ALL RIGHTS RESERVED. 1 66 P LTR - 6 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 37 40 44 245 REF 62 6 38 D 39 247 260 7 246 252 245 35 7 44 19.3 50 0.5 243 REF 6 HOLDDOWN SET-UP 2 244 FEED TYPE 2 2 1 2 56 12 PNEUMATIC 7 2 5 242 166 177 8 238 250 63 249 82 1 C D 2 A 1 137 163 2 3 C 172 1 2 4 2 41 2 176 70 175 51 54 174 55 52 65 6 10 50 2 A 164 20 64 57 33 23 18 67 SERVO LATCH PLATE 213 B 66 B CAM POSITION 30mm STROKE 29 248 33 27 8 1 46 60 31 13 9 1 11 17 53 33 25 22 SERVO FEEDER NOT INCLUDED A 24 4 49 133 135 183 240 REF A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 02FEB2012 CHK 02FEB2012 APVD 02FEB2012 X.ZHAO T.ELBIN S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean End Feed Applicator - DRAWING NO 2150057 SCALE 1:1 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV B 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 6 5 4 3 2 20 SET UP GAUGE 2119599-2 ALL RIGHTS RESERVED. PART NUMBER REVISION 2- 2150057 -2 DESCRIPTION B 2- 2150057 -5 2- 2150057 -7 FINE CRIMP HEIGHT ADJUST B 7- 2150057 -7 FEED TYPE FINE CRIMP HEIGHT ADJUST B FINE CRIMP HEIGHT ADJUST B APPLICATOR STYLE CONVERSION CHART CRIMP TOOLING KIT CONVERT TO - PNEUMATIC SERVO LATCH PLATE NONE - SERVO LATCH PLATE SMART APPLICATOR 4 - PNEUMATIC FEED - - WIRE INSUL SIZE - 2119951-1 2161326-1 - 2119950-1 - - - 1901697-1 - - 2119792-2 - - - 8- 2150057 -5 8- 2150057 -4 - - - - 2119641-2 - - - 2168400-7 - - (QUANTITY 2) - - 2063440-1 - - TYPE 4.57 mm [.180] APPL INSTRUCTIONS 408-10390 7 TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION "250" SERIES POSITIVE LOCK-EX RECEPTACLE TERMINAL NAME: WIRE STRIP LENGTH n 5.50-6.50 mm [.217-.256 IN] C TERMINAL APPLICATION SPECIFICATION (A)114-5119 TE TERMINAL (A) 175022-1 (C) 179974-6 WIRE SIZE 2.00mm2 (2)0.75mm2 1.25mm2 (2)0.5mm2 0.75mm2 B - - 10 TE TERMINAL C1__DWG_PN_1_0 (A) 2-175022-1 C1__DWG_PN_1_1 7 2.20-3.40 mm [.087-.134 IN] - (C)114-5195 TERMINALS APPLIED INSULATION DIAMETER RANGE (B)114-5146 C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL C1__DWG_PN_3_0 (B) 175164-1 C1__DWG_PN_3_1 TE TERMINAL C1__DWG_PN_4_0 (C) 179974-1 C1__DWG_PN_4_1 C1__DWG_PN_1_2 CRIMP HEIGHT REFERENCE SETTING CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 1.82+/-0.05 [.072+/-.002] 1.82+/-0.05 [.072+/-.002] 1.62+/-0.05 [.064+/-.002] 1.55+/-0.05 [.061+/-.002] 1.50+/-0.05 [.059+/-.002] 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 6 9 5.9 5.9 7.9 8.6 9.1 11 W1__FA_SETTING_1 W1__FA_SETTING_2 W1__FA_SETTING_3 W1__FA_SETTING_4 W1__FA_SETTING_5 6 *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2150057 -4 2150057 -5 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 A APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 50 AND 62. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 1 1 GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 & 153. 1 MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. 1 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 10 TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. 11 CUT TO LENGTH AT ASSEMBLY. 1 1 - 1 1 1 - - - 1 - - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - - 2 - - - 1 - - 1 - 4 4 4 - - REF - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - - - 2 - 1 1 1 - REF REF REF - - - 1 - 1 1 1 - - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - - - 1 - - REF - - 1 - 1 1 1 - 1 1 1 - 2 2 2 - 1 - 1 - 2 2 2 - 1 1 1 - 2 2 2 - 1 1 1 - 3 3 3 - 3 3 3 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 2 - 1 1 1 - - - 1 - 1 1 1 - - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 7 7 7 - 2 2 2 - 2 2 2 - 1 1 1 - 2 2 2 - 1 1 1 - 1 1 1 - 2 2 2 - 1 1 1 - 2 2 2 - 1 1 1 - 1 1 1 - - - - 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 - 1 1 1 1 1 1 1 LTR 2119782-1 2119640-1 1803259-1 1-22279-3 2119082-9 2079764-1 2119083-1 2168400-7 2063440-1 2119740-2 2079383-9 1901697-1 6-993111-6 8-22280-7 1752353-2 1901680-2 21045-3 994969-1 994970-2 240638-1 8-21084-1 2119641-2 2119798-2 2079383-8 2119655-6 2119651-1 2119092-2 3-23627-7 SEE NOTE 4 1633743-1 455888-5 2119956-2 2-18032-2 2119740-1 2168078-1 1901681-1 2168400-5 2119793-1 992763-5 2168400-4 2168083-8 5018030-2 5018030-1 986965-8 1-5018030-0 2119792-2 1-1752354-2 18023-9 2079383-7 2119645-1 2119957-1 2119644-2 1-18028-2 2168083-9 1-2168083-0 240639-1 1320906-1 1-1752371-7 240825-2 2-22281-3 1752373-4 1901259-6 1752360-1 240833-1 690482-4 4-1333219-0 1-2217206-0 7-240641-2 238009-1 2119582-3 1-455888-0 1-456422-5 1 1 1 1 1 1 1 2 1 1 4 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2 1 3 3 2 2 2 2 1 1 1 1 1 1 1 1 7 2 2 1 2 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 -77 -27 -25 -22 PART NO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 P DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - - F F 2.79 mm [.110] 66 PART NUMBERS REQUIRED D CRIMP A REVISIONS DIST - 6 APPLICATOR DATA LOC 1 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 02FEB2012 CHK 02FEB2012 APVD 02FEB2012 T.ELBIN S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 ITEM NO DESCRIPTION PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN X.ZHAO 251 250 249 246 244 243 242 240 238 213 186 183 177 176 175 174 172 166 164 163 153 152 145 144 141 140 139 137 135 133 82 71 70 67 66 65 64 63 62 57 56 55 54 53 52 51 50 49 41 40 39 38 33 31 29 27 25 24 23 22 20 18 13 11 10 9 8 7 5 4 3 2 1 FINE ADJUST HEAD ASM, PACIFIC STYLE PUSH ROD, AIR FEED BUSHING, FLANGED SPRING, COMPRESSION CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SHCS, LOW HEAD, RoHS, M5 X 10 AIR FEED MODULE TAG,IDENTIFICATION SCR, BHSC, RoHS (M6 X 20) FEED FINGER ASSEMBLY,EF PIN, SLOTTED SPRING 3.0 X 14.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER O-RING, .801 ID, .070 DIA. MAT. FEED CAM, AIR FEED DETENT PIN SCR, BHSC, RoHS (M4 X 16) APPLICATOR BASIC ASSEMBLY, EF RAM, ASIAN STYLE, END FEED BOLT, ADJUSTMENT PIN, RETAIN, GRVD, 3/16 X .854 MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPACER, CRIMPER DOCUMENTATION PACKAGE SCR, SET, FLT POINT M3 X 10.0 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 HOLDDOWN, TERMINAL SHCS, LOW HEAD, RoHS, M4 X 20 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SHCS, LOW HEAD, RoHS, M4 X 8 SCR, SKT HD CAP, RoHS, M4 X 16 NUT, HEX, REG, RoHS, M4 NUT, HEX, REG, RoHS, M3 NUT, LOCK, HEX, TORQUE (M4) NUT, HEX, REG, RoHS, M3.5 PAWL, EF, AIR STANDOFF,HOLD-DOWN SCR, SKT HD CAP M4 X 6.0 SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION WASHER, FLAT, REG M4 SCR, SKT HD CAP, RoHS, M4 X 20 SCR, SKT HD CAP, RoHS, M4 X 10 STRIPPER (MACHINING) STUD, THREADED PLATE, STRIP GUIDE PLATE, STRIP HOLD DOWN SPRING, COMPRESSION DRAG GUIDE, LOWER STRIP SPACER,HOLD-DOWN PLATE, REAR SHEAR PLATE, FRONT SHEAR ANVIL, COMBINATION BLADE, SLUG SPACER BLOCK, FL CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean End Feed Applicator - DRAWING NO 2150057 SCALE 1:1 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV B D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC REVISIONS DIST A ALL RIGHTS RESERVED. 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 251 40 6 141 62 REF 38 39 D 7 7 19.3 50 0.5 D 145 153 2 246 139 2 140 244 FEED TYPE 1 2 56 11 PNEUMATIC 7 243 REF 6 2 242 5 HOLDDOWN SET-UP 166 63 177 8 238 250 82 1 2 249 1 A C 137 2 3 1 2 2 4 41 2 C 163 176 172 175 70 174 54 52 51 55 65 6 10 50 A 20 64 2 57 164 33 23 SERVO LATCH PLATE 18 67 213 B 66 B CAM POSITION 30mm STROKE 152 SERVO FEEDER NOT INCLUDED A 29 33 27 8 1 141 144 31 13 9 1 11 186 53 33 25 22 24 4 133 135 183 240 REF A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 02FEB2012 CHK 02FEB2012 APVD 02FEB2012 X.ZHAO T.ELBIN S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean End Feed Applicator - DRAWING NO 2150057 SCALE 1:1 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV B