ETC CNCS24JT102 Anti-sulfurated thick film chip resistor array Datasheet

Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
1/8
1. Scope :
This specification applies for the CNCS34 Concave Type of Anti-Sulfurated thick film chip resistor
arrays made by TA-I.
2. Construction , Dimensions , Schematic :
2.1 Construction :
Plating
Ni + Sn
Over Coat
Ceramic Substrate
Conductor
2.1.1 Chip Resistor Arrays :
●
102
2.2
Dimension :
UNIT:mm
Type
L
W
T
P
A
B
C
D
G
CNCS34
3.2±0.2
1.5±0.2
0.55±0.1
0.8±0.1
0.6±0.1
0.3±0.2
0.5±0.1
0.25±0.1
0.35±0.15
TA-I TECHNOLOGY CO., LTD
Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
2/8
2.3 Schematic:
3. Type Designation :
3.1 Chip Resistor Arrays :
CNCS
34
Product Code
J
size
CNC: Anti-Sulfurated
T
Tolerance
102
Packaging
Nominal
Power Rating
Resistance
Chip Resistor Arrays
Concave type
J-±5%
34 – 0603 *4
T- Paper Tape
3
F-±1%
digits e.g.,:
(E-24) 102 = 1KΩ
4. Ratings & Characteristics :
Type
PowerRating
at 70℃
Rating
Voltage
Max .Working
Voltage
Max.
OverLoad
Voltage
Operating
Temp.(℃)
CNCS34
1/16W
Refer 4.2
50V
100V
-55
|
+125℃
Temp
Resistance Resistance
Coefficient
Tolerance(%) Range (Ω)
PPM/℃
±5%
10Ω~1MΩ
±200
TA-I TECHNOLOGY CO., LTD
Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
3/8
4.1 Derating Curve :
For resistors operated at ambient temperature over 70℃ , power rating shall be derated in
accordance with figure 1.
125
Figure 1
4.2 Rated Voltage :
The rated voltage is calculated by the following formula:
E= P * R
E=Rated Voltage(V)
P=Rated Power(W)
R=Resistance Value(Ω)
E.G. : What is CNCS34JT102 the rated voltage ?
CNCS34JT102
E=
P:1/16W
;
R:102 = 1KΩ = 1000Ω
0.0625(W) * 1000(Ω)
=
7.9 (V)
TA-I TECHNOLOGY CO., LTD
Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
4/8
5. Reliability Tests :
Test
Items
Reference
standard
Condition of
Test
Test Limits ( R R )
Temperature Coefficient
of Resistance
IEC60115-1-4.8
JIS-C5201-1-4.8
-55〜 +125 ℃
Refer 4.0
Short Time Overload
IEC60115-1-4.13
JIS-C5201-1-4.13
2.5 X rated voltage for 5 sec
± ( 2.0 % + 0.1Ω )
Intermittent Overload
IEC60115-1-4.39
JIS-C5201-1-4.39
2.5X rated voltage or
Max Overloading Voltage ,
1sec “ON” 25 sec “OFF” ,
10000 cycles
± ( 5.0% + 0.1Ω )
1000 hours at rated voltage ,
Load Life
IEC60115-1-4.25.1
70℃ , 1.5hours
JIS-C5201-1-4.25.1
“ON “, 0.5hour “OFF”
1%:±(1.0%+0.05Ω)
5%:±(3.0%+0.1Ω)
Load Life with Humidity
IEC60115-1-4.24
JIS-C5201-1-4.24
1000 hours at rated voltage
, 40±2℃, 90~95% RH
1.5hours “ON “, 0.5hour “OFF”
1%:±(1.0%+0.05Ω)
5%:±(3.0%+0.1Ω)
Rapid Change of
Temperature
IEC60115-1-4.19
JIS-C5201-1-4.19
-55℃ (30 min. ) / +125 ℃
(30 min. ) 5 cycles
1%:±(0.5%+0.05Ω)
5%:±(1.0%+0.05Ω)
Solderability
IEC60115-1-4.17
JIS-C5201-1-4.17
245±5℃ solder, 2±0.5 sec dwell.
Solder : Sn96.5 / Ag3.0 / Cu0.5
At least 95% of surface area
of electrode shall be covered with
new solder.
Core body
IEC60115-1-4.15
JIS-C5201-1-4.15
Without mechanical damage
Pressure 1.0 kgf a R0.5 pressure rod
such as breaks. Electrical
for 10 sec
characteristics shall be satisfied
Dielectric Withstanding
Voltage (Voltage Proof)
IEC60115-1-4.7
JIS-C5201-1-4.7
Applying voltage 100V for 1 minute
No
abnormalities
such
as
flashover,
burning
dielectric
breakdown shall appear.
Resistance to Solder Heat
IEC60115-1-4.18
JIS-C5201-1-4.18
260 ±5℃ solder ,
10 ±1 sec dwell .
1%:±(1.0%+0.05Ω)
5%:± (2.0% + 0.1Ω )
Sulfur(saturated vapor)
1,000 hours,105±2°C,
unpowered
±(2%+0.05Ω)
Sulfuration Test
ASTM-B-809-95
Note* : RCWV : Rated continuous working voltage .
TA-I TECHNOLOGY CO., LTD
Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
5/8
6. Marking :
6.1 ±5%(E24)
Resistance value is expressed by 3 digits, the first two digits represent the
significant figures of nominal resistance value inΩ, and the third digit
represents exponent for base of 10.
E.G.
2
472 = 47×10 = 4700Ω = 4.7KΩ
6.2 ±1%(E96)
Resistance value is expressed by 4 digits, the first three digits represent the
significant figures of nominal resistance value inΩ, and the fourth digit
represents exponent for base of 10.
0
E.G. :
1000 = 100×10
=
100Ω
7. Taping & Reel :
7.1 Taping Dimensions :
7.1.1
4 mm pitch paper :
UNIT: mm
Type
A
CNCS34 2.0±0.15
B
W
3.6±0.2
8.0±0.2
F
E
P1
3.5±0.05 1.75±0.1 4.0±0.1
P2
P0
2.0±0.05
4.0±0.1
ψD0
+0.1
1.5
T0
0.84±0.1
-0
Paper Tape
Package Type
4 mm pitch
178mm/R
CNCS34
5000
TA-I TECHNOLOGY CO., LTD
Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
7.2
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
6/8
Reel Specifications :
UNIT: mm
Type
ψA
ψB
ψC
CNCS34
178.0 ± 2.0
60 or more
13.0 ± 1.0
7.3
W
9.0 ± 1.0
T
11.5 ± 1.0
Peel off Strength :
Peel –off force of paper and blister tape is in accordance with “JIS-C5202”
that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute.
Pull
top cover tape
carrier tape
300 mm/min
10 ~ 15° standard: 0.1 ~ 0.7 N
TA-I TECHNOLOGY CO., LTD
Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
7/8
8. Label:
8.1 Manufacture Label :
8.1.1 Chip Resistor Array
Date Code
Resistance Tolerance Type
QTY: 5000 PCS
T63140171K
LOT NO:
102
0631
CNCS34JT
8.2. Customer Label ( By customer request ) :
8.2.1 Chip Resistor Array
TA-I
J
Anti-Sulfur Products
TECH
Anti-Sulfur
Product Spec
0603 8P4R 5% 1KΩ
Customer No
21-283-621004 CNCS34JT102
10.05.21
Date
9. Recommended land patterns :
Solder resist
Land
f a
Chip resistor array
b
Land pattern
Type
CNCS
Size
34
p
Dimension
( mm )
a
b
p
f
0.7~0.9
0.40~0.45
0.8
2.2~2.6
TA-I TECHNOLOGY CO., LTD
Anti-Sulfurated Thick Film Chip
Resistor Arrays
( CNCS34 Concave Type )
Halogen-Free
Document No
TCNCS-340S001F
Revised Date
2014/08/05
page number
8/8
10. Recommend IR – Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5) :
Peak : 250
5
℃
0
, 5 sec
Pre – heat Zone : 150 to 180 ℃, 90 ± 30 sec
Soldering Zone : 230℃ or higher , 30 ± 10 sec
11. Storage Conditions :
Temperature : 5 to 35 ℃
Related Humidity :40 to 75% RH
12. Shelf Life :
2 Years from manufacturing date.
13. ECN :
Engineering Change Notice: The customer will be informed with ECN if there is significant
modification on the characteristics and materials described in Approval Sheet.
14. Manufacturing Country & City :
TA-I TECHNOLOGY CO., LTD. ( Taiwan – Tao Yuan )
Tel: 886-3-3246169
Fax : 886-3-3246167
Associated companies :
(1)
FORTUNE TASK RESISTOR FACTORY ( China – Dongguan )
Tel : 86-769-8339-4790〜3 Fax : 86-769-8339-4794
(2)
TA-I TECHNOLOGY (DONGGUAN ) CO., LTD. ( China –Dongguan )
Tel : 86-769-8339-4790〜3 Fax : 86-769-8339-4794
(3)
TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China – Su Zhou)
Tel :86- 512-63457879 Fax : 86-512-63457869
(4)
TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia – Pulaupinang )
Tel :604- 3900480
Fax : 604-3901481
(5)
P.T.TAI ELECTRONICS Indonesia
( Indonesia – Jakarta )
Tel :62-21-89830123
Fax : 62-21-89830703
TA-I TECHNOLOGY CO., LTD
Similar pages