ON CAT8836E18TD-GT3 Nanopower supervisory circuit Datasheet

CAT8836
NanoPower Supervisory
Circuit
Description
The CAT8836 is a voltage supervisory circuit intended to provide
circuit initialization and start−up timing for DSPs and other
processor−based systems.
When system power comes on, CAT8836’s output once the supply
voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory
circuit monitors VDD and keeps the output active as long as VDD
remains below the threshold voltage of VTH. After VDD exceeds the
monitoring threshold an internal timer delays the return of the output
to the inactive state (high) to ensure proper system reset.
The duration of this reset delay is controlled by the CT input. When
CT is connected to GND the reset delay is 10 ms, typical, in duration
and when connected to VDD, the delay time is typically 200 ms.
Whenever the supply voltage drops below the monitoring threshold
voltage VTH, the output becomes active (low) again.
• Supply Current: 220 nA (typical)
• Precision Supply Voltage Supervision Range: 1.8 V, 2.5 V, 3.0 V, and
•
•
•
•
•
•
3.3 V
Power−On Reset Generator with Selectable Delay Time: 10 ms or
200 ms
Push/Pull RESET (active low) Output
Manual Reset Input
Pin−for−Pin Replacement for TPS3836
TSOT23−5 Package
Temperature Range: −40°C to +85°C
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
• Applications Using Low−Power DSPs, Microcontrollers, or
•
•
•
•
•
Microprocessors
Portable− and Battery−Powered Equipment
Intelligent Instruments
Wireless Communication Systems
Automotive Systems
Notebook Computers
© Semiconductor Components Industries, LLC, 2011
January, 2011 − Rev. 0
TSOT−23
TD SUFFIX
CASE 419AE
PIN CONNECTIONS
1
CT
VDD
GND
Features
•
http://onsemi.com
RESET
MR
(Top View)
MARKING DIAGRAM
UTYM
UT = Device Code
Y = Production Year (Last Digit)
M = Production Month: 1−9 (Jan − Sep),
= O, N, D (Oct − Dec)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
1
Publication Order Number:
CAT8836/D
CAT8836
VDD
R
C1
MR
+
C2
CT
Reset Logic
and Timer
RESET
−
VTH (REF)
GND
CAT8836
Figure 1. Functional Block Diagram
Table 1. PIN FUNCTION DESCRIPTION
Pin Number
Pin Name
1
CT
2
GND
3
MR
4
RESET
5
VDD
Description
Delay select pin for a fixed value of 10 ms or 200 ms.
Ground
Manual Reset
Active low Reset. Reset is asserted either if VDD falls below reset threshold or if MR is activated.
Supply Voltage which is monitored
Table 2. ABSOLUTE MAXIMUM RATINGS (Over operating free−air temperature range, unless otherwise noted.)
Parameter
Symbol
Supply voltage (Note 1)
VDD
All other pins (Note 1)
Value
Unit
7
V
−0.3 to 6
V
Maximum low output current
IOL
5
mA
Maximum high output current
IOH
−5
mA
Input clamp current, (VI < 0 or VI > VDD)
IIK
±10
mA
Output clamp current, (VO < 0 or VO > VDD)
IOK
±10
mA
TSTG
−65 to +150
°C
+260
°C
Storage temperature range
Soldering temperature
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. All voltages are with respect to GND.
Table 3. RECOMMENDED OPERATING CONDITIONS (Note 2)
Parameter
Supply voltage
Symbol
Min
Max
Unit
VDD
1.6
5.5
V
0
VDD + 0.3
V
Voltage range, CT, MR and RESET pins
High−level input voltage
VIH
Low−level input voltage
Input transition rise and fall rate at MR
Operating temperature range
V
VIL
0.3 × VDD
V
Dt/DV
100
ns/V
+85
°C
TA
2. Refer to Electrical Characteristics and Application Information for Safe Operating Area.
http://onsemi.com
2
0.7 × VDD
−40
CAT8836
Table 4. ELECTRICAL CHARACTERISTICS (Over recommended operating conditions, unless otherwise noted.)
Parameter
Symbol
Test Conditions
Min
RESET high−level output voltage
VOH
VDD = 3.3 V, IOH = −2 mA
0.8 × VDD
RESET Low−level output voltage
VOL
VDD = 1.8 V, IOL = 1 mA
Typ
Max
Unit
V
0.4
V
0.2
V
VDD = 3.3 V, IOL = 2 mA
RESET power−up voltage
(Note 3)
VDD ≥ 1.1 V, IOL = 50 mA
Negative−going input threshold
voltage (Note 4)
CAT8836E18
VTH
TA = −40°C to +85°C
1.74
V
CAT8836J25
2.18
2.25
2.29
V
2.70
2.79
2.85
V
CAT8836L30
2.56
2.64
2.69
V
CAT8836K33
2.84
2.93
2.99
V
VHYS
MR (Note 5)
IIH
MR (Note 5)
30
2.5 V < VIT < 3.5 V
40
CT = VDD = 5.5 V
−25
IIL
MR = 0 V, VDD = 5.5 V
−130
CT = 0 V, VDD = 5.5 V
−25
IDD
VDD > VTH, VDD < 3 V
220
VDD > VTH, VDD > 3 V
250
450
VDD < VTH
10
15
Internal pull−up resistor at MR
RIN
Input capacitance at MR and CT
CI
VI = 0 V to VDD
−60
mV
−40
CT
Supply current
1.7 V < VIT < 2.5 V
MR = 0.7 × VDD,
VDD = 5.5 V
CT
Input low−level current
1.71
CAT8836H30
Hysteresis at VDD input
Input high−level current
1.66
−200
−100
mA
+25
nA
−340
mA
+25
nA
400
nA
mA
30
kW
5
pF
3. The lowest voltage at which the RESET output becomes active. tR, VDD ≥ 15 ms/V.
4. To ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 mF) should be placed near the supply terminal.
5. If manual reset is unused, MR should be connected to VDD to minimize current consumption.
Table 5. SWITCHING CHARACTERISTICS (At TA = +25°C, RL = 1 MW, and CL = 50 pF, unless otherwise noted.)
Parameter
Delay time
Propagation (delay) time,
high−to−low−level output
Propagation (delay) time,
high−to−low−level output
VDD to RESET delay
MR to RESET delay
Symbol
Test Conditions
Min
Typ
Max
Unit
tPD
VDD ≥ VTH + 0.2 V,
MR = 0.7 × VDD, CT = GND
5
10
15
ms
VDD ≥ VTH + 0.2 V,
MR = 0.7 × VDD, CT = VDD
100
200
300
tPHL
tMHL
VIL = VTH − 0.2 V,
VIH = VTH + 0.2 V
10
VIL = 1.6 V
50
VDD ≥ VTH + 0.2 V,
VIL = 0.3 × VDD,
VIH = 0.7 × VDD
100
ms
ns
Table 6. TIMING REQUIREMENTS (At TA = +25°C, RL = 1 MW, and CL = 50 pF, unless otherwise noted.)
Parameter
Pulse width
Symbol
Test Conditions
Min
at VDD
tW
VIH = VTH + 0.2 V, VIL = VTH – 0.2 V
6
at MR
tWR
VDD ≥ VTH + 0.2 V, VIL = 0.3 × VDD, VIH = 0.7 × VDD
1
http://onsemi.com
3
Typ
Max
Unit
ms
CAT8836
Table 7. FUNCTION TABLE
MR
VDD > VTH
RESET
L
0
L
L
1
L
H
0
L
H
1
H
CAT8836
RESET
RL
CL
Figure 2. Test Circuit
TIMING DIAGRAM
VDD
VTH
< 1.1 V
t
MR
t
RESET
t
Undefined
Output
tPD
tPD
tPHL
Figure 3. Timing Diagram
http://onsemi.com
4
Undefined
Output
CAT8836
TYPICAL CHARACTERISTICS
240
1.0005
220
1.0000
0.9995
VTH_VCC (V)
ISB (nA)
200
180
160
140
90°C
25°C
−40°C
120
100
1.5
2.5
3.5
0.9990
0.9985
0.9980
0.9975
0.9970
4.5
0.9965
−40
5.5
TEMPERATURE (°C)
Figure 4. Supply Current vs. Supply Voltage
Figure 5. Normalized Reset Threshold Voltage
vs. Temperature
200
9.8
195
9.6
190
9.4
9.2
TRST (ms)
TRST (ms)
90
VCC (V)
10.0
9.0
8.8
8.6
1.5
2.5
3.5
185
180
175
90°C
25°C
−40°C
170
90°C
25°C
−40°C
8.4
8.2
8.0
25
165
4.5
160
5.5
1.5
2.5
3.5
4.5
VCC (V)
VCC (V)
Figure 6. Reset Time Out vs. VCC (CT = 0 V)
Figure 7. Reset Time Out vs. VCC (CT = 5 V)
5.5
Detailed Description
The supervisory circuit monitors VDD and keeps the
RESET output active as long as VDD remains below the
threshold voltage of VTH. An internal timer delays the return
of the output to the inactive state (high) to ensure proper
system reset. The delay time starts after VDD has risen above
the threshold.
http://onsemi.com
5
CAT8836
PACKAGE DIMENSIONS
TSOT−23, 5 LEAD
CASE 419AE−01
ISSUE O
SYMBOL
D
MIN
NOM
A
e
E1
MAX
1.00
A1
0.01
0.05
0.10
A2
0.80
0.87
0.90
b
0.30
c
0.12
0.45
0.15
D
2.90 BSC
E
2.80 BSC
E1
1.60 BSC
e
0.95 TYP
E
L
0.30
L1
0.40
0.20
0.50
0.60 REF
L2
0.25 BSC
0º
θ
8º
TOP VIEW
A2 A
b
q
L
A1
c
L1
SIDE VIEW
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-193.
http://onsemi.com
6
L2
CAT8836
Table 8. ORDERING INFORMATION
Device
Nominal
Supply Voltage
Threshold Level
Marking
Package
Shipping
CAT8836E18TD−GT3
1.8 V
1.71
UTYM
3000 / Tape & Reel
CAT8836J25TD−GT3
2.5 V
2.25
TSOT−23
(Pb−Free)
CAT8836H30TD−GT3
3.0 V
2.79
CAT8836L30TD−GT3
3.0 V
2.64
CAT8836K33TD−GT3
3.3 V
2.93
Example of Ordering Information (Notes 6 − 9)
Prefix
Device #
Suffix
CAT
8836
E18
TD
−G
T3
Company ID
(Optional)
Product Number
8836
Threshold Voltage
E18 = 1.71 V
J25 = 2.25 V
H30 = 2.79 V
L30 = 2.64 V
K33 = 2.93 V
Package
TD: TSOT−23
Lead Finish
G: NiPdAu
Tape & Reel (Note 10)
T: Tape & Reel
3: 3,000 / Reel
6. All packages are RoHS−compliant (Lead−free, Halogen−free).
7. The standard finish is NiPdAu.
8. The device used in the above example is a CAT8836E18TD−GT3 (CAT8836, 1.71 threshold voltage, TSOT−23, NiPdAu, Tape & Reel,
3,000/Reel).
9. For additional detection voltage, package and temperature options, please contact your nearest ON Semiconductor Sales office.
10. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
CAT8836/D
Similar pages