Vishay BAS19-G Small signal switching diodes, high voltage Datasheet

BAS19-G, BAS20-G, BAS21-G
www.vishay.com
Vishay Semiconductors
Small Signal Switching Diodes, High Voltage
FEATURES
• Silicon epitaxial planar diode
3
• Fast switching diode in case SOT-23, especially
suited for automatic insertion
• General purpose switching applications
• High conductance
1
2
• AEC-Q101 qualified
• Base P/N-G3 - green, commercial grade
• Material categorization:
For definitions of compliance
www.vishay.com/doc?99912
MECHANICAL DATA
Case: SOT-23
Weight: approx. 8.1 mg
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
please
see




PARTS TABLE
PART
TYPE
DIFFERENTIATION
ORDERING CODE
TYPE MARKING
INTERNAL CONSTRUCTION
REMARKS
BAS19-G
VR = 100 V
BAS19-G3-08 or BAS19-G3-18
A8G
Single diode
Tape and reel
BAS20-G
VR = 150 V
BAS20-G3-08 or BAS20-G3-18
A9G
Single diode
Tape and reel
BAS21-G
VR = 200 V
BAS21-G3-08 or BAS21-G3-18
AAG
Single diode
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Continuous reverse voltage
Repetitive peak reverse voltage
Non-repetitive peak forward current
t = 1 μs
Non-repetitive peak forward surge current
t=1s
Maximum average forward rectified current (1)
(av. over any 20 ms period)
PART
SYMBOL
VALUE
UNIT
BAS19-G
VR
100
V
BAS20-G
VR
150
V
BAS21-G
VR
200
V
BAS19-G
VRRM
120
V
BAS20-G
VRRM
200
V
BAS21-G
VRRM
250
V
IFSM
2.5
0.5
A
IF(AV)
200
mA
IF
200
mA
Repetitive peak forward current
IFRM
625
mA
Power dissipation (2)
Ptot
250
mW
DC forward current (2)
Notes
(1) Measured under pulse conditions; pulse time = t  0.3 ms
p
(2) Device on fiberglass substrate, see layout on next page
Rev. 1.1, 15-May-13
Document Number: 83390
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAS19-G, BAS20-G, BAS21-G
www.vishay.com
Vishay Semiconductors
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
RthJA
430
K/W
Tj
150
°C
Storage temperature range
Tstg
- 65 to + 150
°C
Operating temperature range
Top
- 55 to + 150
°C
Thermal resistance junction to ambient air (1)
Junction temperature
Note
(1) Device on fiberglass substrate, see layout drawing below
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Forward voltage
Leakage current
MAX.
UNIT
IF = 100 mA
PART
VF
1.0
V
IF = 200 mA
VF
1.25
TYP.
V
BAS19-G
IR
100
nA
VR = 150 V
BAS20-G
IR
100
nA
VR = 200 V
BAS21-G
IR
100
nA
IR
100
μA

IF = 10 mA
rf
VR = 0, f = 1 MHz
CD
5
pF
IF = IR = 30 mA, RL = 100 ,
iR = 3 mA
trr
50
ns
Diode capacitance
Reverse recovery time
MIN.
VR = 100 V
VR = VRmax., TJ = 150 °C
Dynamic forward resistance
SYMBOL
5
Layout for RthJA test
Thickness:
Fiberglass 1.5 mm (0.059 in.)
Copper leads 0.3 mm (0.012 in.)
7.5 (0.3)
3 (0.12)
1 (0.4)
2 (0.8)
1 (0.4)
12 (0.47)
15 (0.59)
2 (0.8)
0.8 (0.03)
5 (0.2)
1.5 (0.06)
5.1 (0.2)
Rev. 1.1, 15-May-13
17451
Document Number: 83390
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAS19-G, BAS20-G, BAS21-G
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches): SOT-23
1.15 (0.045)
0° t
o8
°
0.2 (0.008)
0.098 (0.004)
0.175 (0.007)
0.1 (0.004) max.
0.550 ref. (0.022 ref.)
0.9 (0.035)
3.1 (0.122)
2.8 (0.110)
0.5 (0.020)
0.45 (0.018)
0.45 (0.018)
0.35 (0.014)
0.35 (0.014)
0.3 (0.012)
2.6 (0.102)
2.35 (0.093)
Foot print recommendation:
1 (0.039)
0.9 (0.035)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
Rev. 1.1, 15-May-13
0.9 (0.035)
0.7 (0.028)
2 (0.079)
1.43 (0.056)
1.20 (0.047)
0.45 (0.018)
0.35 (0.014)
1 (0.039)
0.9 (0.035)
0.95 (0.037)
0.95 (0.037)
Document Number: 83390
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
Similar pages