Abracon ACMV-0603LC-260-C030 Smd multilayer chip varistor Datasheet

SMD Multilayer Chip Varistor
AMCV-0603LC
RoHS
1.6
. x 0.8 x 0.8 mm
Compliant
FEATURES:
APPLICATIONS:
• Transient voltage protection and voltage surge suppression for
LED lighting
• Suitable for LCD-TV, STB, Switch, Router, PLC, Security
System, smart meters, mobile phones
• Suppressing Induced / switching over-voltage caused by
lightning and power
• Protecting DC-DC Module, I/O ports, IC driver
• SMD type, small size suitable for high density mounting
• Excellent clamping ratio and strong capability of voltage surge suppression
• Excellent solderability (Ni, Sn plating)
STANDARD SPECIFICATIONS:
Operating Temperature: -55˚C ~ +125˚C
Storage Temperature: -10˚C ~ +40˚C and RH 70% (Max.)
Part Number
Max. Working
Voltage
Varistor
Voltage
Max. Clamping
Voltage
Rated Single Pulse
Transient
Typical
Capacitance
@1mA
DC
8/20μs
ESD
Energy
10/1000μs
Units
Symbol
ACMV-0603LC-140-C100
<20μA
AC
DC
RMS
Volts Volts
VWDC VWAC
14.0
10.0
Volts
VB
16.0-22.0
Volts
VC*1
30
Volts
VC*2
39
Joules
ET
0.005
Peak
Current
8/20μs
Amps
IP
2
ACMV-0603LC-140-C120
14.0
10.0
16.0-22.0
30
39
0.005
2
12
ACMV-0603LC-180-C050
18.0
12.7
22.0-28.0
40
48
0.003
1
5
ACMV-0603LC-180-C100
18.0
12.7
22.0-28.0
40
48
0.005
2
10
ACMV-0603LC-180-C120
18.0
12.7
22.0-28.0
40
48
0.005
2
12
ACMV-0603LC-260-C030
26.0
18.4
31.0-38.0
58
70
0.003
1
3
ACMV-0603LC-260-C100
26.0
18.4
31.0-38.0
58
70
0.005
2
10
Test Condition
@0.5Vrms,
1MHz
pF
C
10
ACMV-0603LC-260-C120
26.0
18.4
31.0-38.0
58
70
0.005
2
12
*1: Vc, Maximum peak voltage across the varistor measured at a specified pulse current and waveform.
Energy Rating
Pulse & Waveform
0.00- 0.05 Joule
1A, 8/20μs
0.10 Joule
2A, 8/20μs
0.20-0.50 Joule
5A, 8/20μs
*2: Vc, Maximum peak voltage across the varistor measured at 30ns after initiation of pulse on IEC61000-4-2 30A/8KV.
Test Conditions
Unless otherwise specified, the standard atmospheric conditions for measurement/test as:
a. Ambient Temperature: 20±15˚C
b. Relative Humidity: 65±20%
c. Air Pressure: 86 kPa to 106 kPa
Items
Test Methods and Remarks
Varistor Voltage at 1mA DC (VB)
Measuring current: 1mA DC
Duration: 0.2 to 2 sec
Capacitance (C)
Measure source: 0.5 VRMS
Test frequency: 1MHz.
Leakage Current (IL)
Measuring voltage: Maximum DC working voltage
Clamping Voltage (VC)
Measuring source: 8/20us waveform, ESD waveform
ABRACON IS
ISOISO
9001
/ QS 9000
9001:2008
CERTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 11.30.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
SMD Multilayer Chip Varistor
AMCV-0603LC
RoHS
1.6
. x 0.8 x 0.8 mm
Compliant
OPTIONS AND PART IDENTIFICATION:
AMCV-0603LC-
Voltage Code
Please refer to the
table above
-C
Capacitance
Code
Please refer to
the table above
-
Tolerance
N=±30%
Y=+100%, -50%
G=+0%, -60%
Packaging
T: Tape and Reel
(4kpcs / reel)
OUTLINE DIMENSION:
Recommended Land Pattern
L
1.6±0.15
[0.063±0.006]
W
0.8±0.15
[0.031±0.006]
T
0.8±0.15
[0.031±0.006]
a
0.3±0.2
[0.012±0.008]
A
B
C
0.60〜0.80
0.60〜0.80
0.60〜0.80
Dimension: mm [inch]
Materials
Side View
1
2
Part Name
Base Material
Internal Conductor
3
Terminal Electrode
Material
ZnO
Ag-Pd
Ag (Inner layer)
Ni-Sn (Outer layer)
Top View
ABRACON IS
ISOISO
9001
/ QS 9000
9001:2008
CERTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 11.30.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
SMD Multilayer Chip Varistor
AMCV-0603LC
RoHS
1.6
. x 0.8 x 0.8 mm
Compliant
REFLOW PROFILE:
Preheat Condition
Allowed time above 217 ˚C
Max temperature
Max time at max temperature
Solder paste
Allowed Reflow time
150 to 200 ˚C; 60 to 120 sec.
60 to 90 sec.
260 ˚C
10 sec.
Sn/3.0Ag/0.5Cu
2x max.
TAPE & REEL:
Packing
T: 4,000pcs / reel
A
B
P
T (max)
1.0±0.2
1.8±0.2
4.0±0.1
1.1
9.0±1.5mm
Storage Conditions
a. The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to high humidit y
Package must be stored at 40oC or less and 70% RH or less.
b. The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to dust of
harmful gas (e.g. HCI, sulfurous gas of H2S).
c. Packaging material may be deformed if package are stored where they are exposed to heat of direct sunlight.
d. Solderability shall be guaranteed for 6 months from the date of delivery on condition that they are stored at the environment
specified in 1.3. The parts that are stored more than 6 months shall be checked solderability before use.
Dimension:
mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISOISO
9001
/ QS 9000
9001:2008
CERTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 11.30.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Similar pages