7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 5 4 3 2 20 PART NUMBER REVISION DESCRIPTION FEED TYPE 2151773 -2 B FINE CRIMP HEIGHT ADJUST PNEUMATIC B FINE CRIMP HEIGHT ADJUST 2151773 -6 B NON-CRIMP HEIGHT ADJUST 2151773 -7 B FINE CRIMP HEIGHT ADJUST 7- 2151773 -7 SERVO LATCH PLATE B CRIMP TOOLING KIT 4 SERVO LATCH PLATE NONE - APPLICATOR STYLE CONVERSION CHART CONVERT TO SERVO LATCH PLATE SMART APPLICATOR 4 12 PNEUMATIC FEED - - - 2119951-1 - 2161326-1 2119950-1 - 8- 2151773 -5 - 8- 2151773 -4 1338685-1 5-18022-5 - - - - - - 2119641-1 - - - 1901094-3 - - - - - - - - 2168400-6 2119799-1 - - - (QUANTITY 2) - - - 2063440-2 - - - 6 - - - - - - CRIMP WIRE INSUL SIZE - TYPE - F O 2.05 mm [.081] 2.80 mm [.110] APPLICATOR INSTRUCTIONS 408-10389 - TE TERMINAL TERMINAL DATA: WIRE STRIP LENGTH 4.20-4.80 mm [.165-.189 IN] C TERMINAL APPLICATION SPECIFICATION - TERMINALS APPLIED TE TERMINAL 1-963734-1 n 114-18052 C1__DWG_PN_1_1 - INSULATION DIAMETER RANGE - - 1.40-2.10 mm [.055-.083 IN] - - - - - - - 10 TE TERMINAL 1-963734-2 C1__DWG_PN_1_0 - TE CRIMP SPECIFICATION TAB 5.8X0.8 ASSY TERMINAL NAME: C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 2-963734-1 C1__DWG_PN_3_0 C1__DWG_PN_3_1 - TE TERMINAL 2-963734-2 - C1__DWG_PN_4_0 - 6 C1__DWG_PN_4_1 - WIRE SIZE 1.00mm2 0.75mm2 0.50mm2 B CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 1.56+/-0.05 [.061+/-.002] 1.47+/-0.05 [.058+/-.002] 1.38+/-0.05 [.054+/-.002] 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY CRIMP HEIGHT REFERENCE SETTING 8.7 W1__DWG_CRIMP_HT_1 9.6 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 10.5 - 9 - W1__FA_SETTING_1 - 6 W1__FA_SETTING_2 - W1__FA_SETTING_3 - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. - 6 - 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 - APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- - 2151773 -4 2151773 -5 2151773 -6 - 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 10 11 A 12 - APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 50, 62. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEMS 242. FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 37, 50. GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 - 1 1 1 - TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. - TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON THE BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. WHEN ASSEMBLING A NON CRIMP HEIGHT ADJUST APPLICATOR (-6) USE SHIMS FROM ITEM 260 TO ACHIEVE A NOMINAL SHIM HEIGHT OF - 1 MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. 4.24 . 1 1 -77 -7 1 - -6 1 1 -5 1 2119957-2 8-21084-0 2119640-1 2079988-1 2119641-1 2119798-1 -2 PART NO 1 1 1 1 APPLICATOR SHIM PACK O-RING, .676 ID, .070 DIA. MAT. PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI FEED CAM, AIR FEED DETENT PIN DESCRIPTION 1 2119957-2 1 8-21084-0_GATD 1 2119640-1 1 2079988_GATD 1 2119641-1 1 2119798-1 260 252 250 249 248 247 Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 - ITEM NO 1 1 1 1 - REVISIONS DIST A - - 1 66 P LTR 1 1 - 1 1 1 1 1 REF REF REF - - - - - - - - - 1 1 - 1 REF REF - 1 1 1 1 - - 1 1 REF REF 1 1 2 1 2 1 1 1 - 1 1 1 1 - - 1 1 1 - - 1 1 1 - - 1 1 1 - - 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 - 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 - 1 1 - 1 1 1 1 - 1 1 1 1 - 4 1 1 1 1 4 1 1 1 - 4 1 1 - - 4 3 1 - - 1 3 1 - 2 1 - 1 1 2 - 3 1 - 2 1 1 1 - 2 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 - 1 - 1 - 1 -6 -5 mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - RK GB B ECR-15-000142 06JAN2015 JH TE SPRING, COMPRESSION RAM, AMP STYLE, SIDE FEED, NON-ADJ. CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 SHCS, LOW HEAD, RoHS, M5 X 16 AIR FEED MODULE TAG,IDENTIFICATION SPACER, FEEDER PIN, SLOTTED SPRING 3.0 X 20.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM WASHER, FLAT, REG M4 FEED FINGER ASSEMBLY,SF SPACER, CRIMPER SCR, BHSC, RoHS (M4 X 8) EXTENSION PLATE DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, BHSC, RoHS (M4 X 8) SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SHCS, LOW HEAD, RoHS, M4 X 12 NUT, HEX, REG, RoHS, M3.5 HOLDDOWN, TERMINAL STANDOFF,HOLD-DOWN SCR, SKT HD CAP M4 X 6.0 APPLICATOR BASIC ASSEMBLY, SF RAM, AMP STYLE, SIDE FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION FA HEAD, ATLANTIC STYLE BOLT, ADJUSTMENT SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) HEX HEAD, FLANGED, M5 x 8mm LONG SPACER, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O CRIMPER, WIRE PREMIUM DWN 14NOV2012 CHK 14NOV2012 APVD 14NOV2012 L.ZHANG L.ZHANG S.XI NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 1 2119082-8 1 2079764 1 2119083 1 7-18023-7 2 2168400-6 1 2063440-2 1 2119740-2 .. 1 1901094-3 1 993111-1 1 8-22280-7_SIMP 1 1752353-2 1 1901680-2 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 1-18028-2 1 2119944-1 1 455888-5 2 2079383-4 1 1633470-2 1 2119956-1 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 1 2079383-4 1 5-18022-5 1 1338685-1 4 2168400-1 1 1-5018030-0 1 1901681-2 1 1-1752354-1 1 18023-9 1 2119656-9 1 2119370 1 2079383-7 1 2119645 1 2119957-1 1 2119644-2 1 2119085 1 2119092-1 1 1-1752356-2 2 2079383-5 1 2161328 1 1320908-5 1 2119959-2 1 1-455888-5 1 1320928-4 1 2168083-2 1 1-18028-2 1 2119533 1 2119806-3 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-8 1 2-454276-0 1 2-1633927-8 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-4 1 238011-2 1 3-1633966-8 .. 1 ITEM_2 1 1-456405-6 246 245 244 243 242 241 240 238 213 198 177 176 175 174 172 166 164 163 137 136 135 133 119 117 82 79 78 71 70 69 67 66 63 62 60 59 56 54 52 51 50 49 46 44 41 40 39 38 37 35 34 33 32 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119758 TE Connectivity APPLICATION SPEC - 1 1-22279-3_SIMP DESCRIPTION PRODUCT SPEC - APVD 19DEC2012 PART NO 1 DWN RELEASED -2 2 DATE A 1 1 - 1 REF 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 - - 1 - 1 2 - - 1 1 2 - 1 1 1 - 1 1 1 1 - 1 DESCRIPTION 1-22279-3 2119758-1 2119082-8 2079764-1 2119083-1 7-18023-7 2168400-6 2063440-2 2119740-2 1901094-3 993111-1 8-22280-7 1752353-2 1901680-2 21045-3 994969-1 994970-2 240638-1 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 1-18028-2 2119944-1 455888-5 2079383-4 1633470-2 2119956-1 2119791-5 2119943-1 2119740-1 2168078-1 2119793-1 992763-5 2079383-4 5-18022-5 1338685-1 2168400-1 1-5018030-0 1901681-2 1-1752354-1 18023-9 2119656-9 2119370-1 2079383-7 2119645-1 2119957-1 2119644-2 2119085-1 2119092-1 1-1752356-2 2079383-5 2161328-1 1320908-5 2119959-2 1-455888-5 1320928-4 2168083-2 1-18028-2 2119533-1 2119806-3 3-22280-3 1-356885-4 2119805-8 2-454276-0 2-1633927-8 2119757-4 238011-2 3-1633966-8 1-456405-6 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: & 4 of 4) 1 -77 -7 ATLANTIC VERSION AMP 4805 REV 31MAR2000 - 1 & 252. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 1 PART NUMBERS REQUIRED - APPLICATOR DATA LOC SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. 2151773 -5 D 6 Ocean Side Feed Applicator - DRAWING NO 2151773 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV B D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION SEE SHEET 1 - FEED TYPE 6 6 PNEUMATIC D 250 163 59 247 246 260 44 7 252 245 35 244 7 137 63 166 172 2 2 2 2 243 8 242 2 3.00 0.50 [ 0.118 0.019 ] 6 8 177 82 1 1 135 REF 34 REF 69 4 133 C 70 198 3 1 4 2 176 A 2 TERMINAL SUPPORT LOCATION 28 5 41 174 44 2 SERVO FEEDER NOT INCLUDED 175 19.81 [ 0.780 ] 51 117 REF 6 164 50 66 2 11 67 33 24 10 A 50 REF 213 HOLDDOWN SET-UP 19 60 B 20 30 21 78 9 1 ITEM 30 LOCATED AT FRONT HOLES 12 29 241 CAM POSITION 30mm STROKE REF 245 REF 52 B - D 56 240 - - 62 39 136 C APVD 37 38 238 SERVO LATCH PLATE DWN 40 2 249 A DATE 13 30 REF 29 REF 1 11 11 119 46 32 34 54 8 1 60 54 10 1 FEED TRACK POSITION GUIDE BY INSULATION BARREL 248 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 14NOV2012 CHK 14NOV2012 APVD 14NOV2012 L.ZHANG L.ZHANG S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151773 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV B 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 6 5 4 3 2 20 SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. PART NUMBER REVISION DESCRIPTION FEED TYPE 2- 2151773 -2 B FINE CRIMP HEIGHT ADJUST PNEUMATIC 2- 2151773 -5 B 2- 2151773 -7 FINE CRIMP HEIGHT ADJUST B 7- 2151773 -7 FINE CRIMP HEIGHT ADJUST B CRIMP TOOLING KIT SERVO LATCH PLATE NONE - APPLICATOR STYLE CONVERSION CHART CONVERT TO SERVO LATCH PLATE SMART APPLICATOR 4 PNEUMATIC FEED - - 2119951-1 - 2161326-1 2119950-1 - 8- 2151773 -5 - 8- 2151773 -4 1338685-1 5-18022-5 - - - - - 1901094-3 - 2119641-2 - - - 2168400-6 2119799-1 - (QUANTITY 2) - - 6 2063440-2 - - 1 - F O 2.80 mm [.110] APPLICATOR INSTRUCTIONS 408-10389 TE TERMINAL TERMINAL DATA: TAB 5.8X0.8 ASSY TERMINAL NAME: WIRE STRIP LENGTH 4.20-4.80 mm [.165-.189 IN] C TERMINAL APPLICATION SPECIFICATION 1-963734-1 n 114-18052 - TERMINALS APPLIED TE TERMINAL TE CRIMP SPECIFICATION 1-963734-2 C1__DWG_PN_1_1 - - - - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 C1__DWG_PN_3_0 2-963734-1 C1__DWG_PN_3_1 TE TERMINAL 2-963734-2 WIRE SIZE 1.00mm2 0.75mm2 0.50mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 1.56+/-0.05 [.061+/-.002] 1.47+/-0.05 [.058+/-.002] 1.38+/-0.05 [.054+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 8.7 9.6 10.5 9 W1__FA_SETTING_1 6 W1__FA_SETTING_2 1 B 2 6 *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. RECOMMENDED SPARE PARTS GREASE BEARING SURFACES LIGHTLY 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2151773 -4 2151773 -5 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 10 11 A 1 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 50, 62. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEMS 242. GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 1 & 152. 1 MAGNET MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. 1 - 1 1 1 1 1 1 1 1 -77 -27 -25 -22 2119782-1 2119640-1 2079988-1 1-22279-3 PART NO FINE ADJUST HEAD ASM, PACIFIC STYLE PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI SPRING, COMPRESSION DESCRIPTION 1 2119782 1 2119640-1 1 2079988_GATD 1 1-22279-3_SIMP 251 250 249 246 1 1 AMP 4805 REV 31MAR2000 - 1 - 1 1 1 1 1 1 1 - 1 - 1 - 1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: mm & 2 of 4) - LTR DESCRIPTION DATE SEE SHEET 1 DWN APVD - - MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 SHCS, LOW HEAD, RoHS, M5 X 16 AIR FEED MODULE TAG,IDENTIFICATION SPACER, FEEDER PIN, SLOTTED SPRING 3.0 X 20.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER O-RING, .801 ID, .070 DIA. MAT. FEED CAM, AIR FEED DETENT PIN SCR, BHSC, RoHS (M4 X 16) SHCS, LOW HEAD, RoHS, M4 X 20 APPLICATOR BASIC ASSEMBLY, SF RAM, ASIAN STYLE, SIDE FEED BOLT, ADJUSTMENT PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM WASHER, FLAT, REG M4 FEED FINGER ASSEMBLY,SF SPACER, CRIMPER SCR, BHSC, RoHS (M4 X 8) EXTENSION PLATE DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED NUT, HEX, REG, RoHS, M3.5 HOLDDOWN, TERMINAL STANDOFF,HOLD-DOWN SCR, SKT HD CAP M4 X 6.0 SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) HEX HEAD, FLANGED, M5 x 8mm LONG SPACER, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O CRIMPER, WIRE PREMIUM PART NO -77 -27 -25 -22 ITEM NO PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 1 - - 1 1 1 - - 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 - 1 - 1 1 - - 1 1 1 - 1 1 1 - 1 - 1 - 3 - - - 1 3 - - 2 1 3 - 1 2 1 - 1 - 2 - 1 1 1 - 1 1 1 - W1__FA_SETTING_3 1 1 1 - 2 1 1 - 1 2 1 - - 1 2 - 1 REF 1 - - 1 - - - 1 1 - 1 REF - - C1__DWG_PN_4_1 1 - - - C1__DWG_PN_4_0 1 - - - 1 1 - - 1 1 1 - 4 1 1 - 1 4 1 - 10 TE TERMINAL C1__DWG_PN_1_0 1.40-2.10 mm [.055-.083 IN] 1 1 4 - 1 1 1 - 1 - 1 - 1 1 - - INSULATION DIAMETER RANGE - 1 - 1 REF REF - - 2 1 REF - 1 - 1 - 1 1 - - 1 1 1 - 1 1 1 - - 1 1 - - 1 1 - TYPE 1 1 - - - - - - 1 2 - - 1 1 - - 2.05 mm [.081] P 2119082-8 2079764-1 2119083-1 7-18023-7 2168400-6 2063440-2 2119740-2 1901094-3 993111-1 8-22280-7 1752353-2 1901680-2 21045-3 994969-1 994970-2 240638-1 8-21084-1 2119641-2 2119798-2 2079383-8 2168400-5 1-2119656-0 2119650-1 2119092-2 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 1-18028-2 2119944-1 455888-5 2079383-4 1633470-2 2119956-1 2119791-5 2119943-1 2119740-1 2168078-1 2119793-1 992763-5 5-18022-5 1338685-1 1-5018030-0 1901681-2 1-1752354-1 18023-9 2079383-7 2119645-1 2119957-1 2119644-2 1-1752356-2 2079383-5 2161328-1 1320908-5 2119959-2 1-455888-5 1320928-4 2168083-2 1-18028-2 2119533-1 2119806-3 3-22280-3 1-356885-4 2119805-8 2-454276-0 2-1633927-8 2119757-4 238011-2 3-1633966-8 1-456405-6 1 1 1 - WIRE INSUL 66 1 1 1 - - 1 1 - SIZE A - PART NUMBERS REQUIRED D CRIMP REVISIONS DIST - - APPLICATOR DATA LOC 1 DWN 14NOV2012 CHK 14NOV2012 APVD 14NOV2012 L.ZHANG L.ZHANG S.XI NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 7-18023-7 2 2168400-6 1 2063440-2 1 2119740-2 .. 1 1901094-3 1 993111-1 1 8-22280-7_SIMP 1 1752353-2 1 1901680-2 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 8-21084-1_GATD 1 2119641-2 1 2119798-2 1 2079383-8 4 2168400-5 1 1-2119656-0 1 2119650 1 2119092-2 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 1-18028-2 1 2119944-1 1 455888-5 2 2079383-4 1 1633470-2 1 2119956-1 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 1 5-18022-5 1 1338685-1 1 1-5018030-0 1 1901681-2 1 1-1752354-1 1 18023-9 1 2079383-7 1 2119645 1 2119957-1 1 2119644-2 1 1-1752356-2 2 2079383-5 1 2161328 1 1320908-5 1 2119959-2 1 1-455888-5 1 1320928-4 1 2168083-2 1 1-18028-2 1 2119533 1 2119806-3 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-8 1 2-454276-0 1 2-1633927-8 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-4 1 238011-2 1 3-1633966-8 .. 1 ITEM_2 1 1-456405-6 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119083 244 243 242 241 240 238 213 198 177 176 175 174 172 166 164 163 152 151 145 144 143 141 140 139 137 136 135 133 119 117 82 79 78 71 70 69 67 66 63 62 59 56 52 51 50 49 41 40 39 38 34 33 32 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2079764 DESCRIPTION PRODUCT SPEC - 1 2119082-8 Ocean Side Feed Applicator - DRAWING NO 2151773 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV B D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - 251 62 6 40 145 38 D 246 39 FEED TYPE 7 140 152 2 D 2 2 244 7 139 243 PNEUMATIC 250 2 8 249 166 242 63 2 3.00 0.50 [ 0.118 0.019 ] 6 238 A 34 59 177 82 1 137 C 1 TERMINAL SUPPORT LOCATION 69 70 172 3 56 2 SERVO LATCH PLATE 2 176 C 1 4 28 5 174 41 52 240 133 4 135 2 6 A 140 164 175 10 19.81 [ 0.780 ] 66 50 11 67 2 33 24 213 A 50 19 REF HOLDDOWN SET-UP 20 79 117 REF REF 51 198 SERVO FEEDER NOT INCLUDED REF 163 136 B REF 8 B 21 30 9 1 12 78 241 29 13 1 ITEM 30 LOCATED AT FRONT HOLES 11 30 CAM POSITION REF REF 29 30mm STROKE 141 151 32 34 143 8 1 144 143 10 1 119 11 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 PACIFIC VERSION AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 14NOV2012 CHK 14NOV2012 APVD 14NOV2012 L.ZHANG L.ZHANG S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151773 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV B