MACOM 5-104068-3

TE Connectivity Catalog 82012 Revised 4-12
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
82012 LUG Printer ?M 04/2012
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
Ribbon Cable Interconnect Solutions
te.com
Ribbon Cable
Interconnect Solutions
Ribbon Cable Interconnect Solutions
Ribbon Cable Connector Selection Guide
.039" [1.00 mm]
Cable Pitch
Ribbon Cable Connector Selection Guide
.025" [0.64 mm]
Cable Pitch
Mates to .050" x .100"
2-Row Pin Header
Grid
Pages 10 and 11
Mates to .100" x .100"
2-Row Pin Header
Grid
Page 15
Mates to .078" [2 mm]
x .078" [2 mm]
2-Row Pin Header
Grid
Solders to
.075" x .100"
4-Row PCB Layout
See 5176264, 5178751 Series
and Part Number 1775109
(Not in this Catalog)
System 50
Receptacles
Pages 8-11
Ultra ATA Bus
Receptacles
Pages 13-15
System 50
Paddleboard
Page 12
2 mm
Receptacle
Connectors
Pages 16 and 17
.050" [1.27 mm]
Cable Pitch
Mates to .50" x .50"
Micro-MaTch
Female Top Entry,
215079 Series,
PCB Connector
Page 8
Mates to .050" x .050"
Micro-MaTch
Female Side Entry,
215460 Series,
PCB Connector
Page 9
Mates to .050" x .050"
Micro-MaTch
Female Top Entry
SMD, 188275 Series,
PCB Connector
Page 10
Solders directly to
2.54mm x 1.27mm
Staggered 2 row
PCB Footprint
Male-on-Wire
215083 Series,
Page 12
Male-on-Wire
215083 Series,
Page 12
Male-on-Wire
215083 Series,
Page 12
Paddle Board
Connector,
215570 Series,
Page 13
.050" [1.27 mm]
Cable Pitch
(Continued)
Mates to 50" x 50"
Right-Angle
Headers
Mates to 50" x 50"
Vertical Headers
50/50 Grid
Receptacle
Connector with or
without latch
50/50 Grid
Receptacle
Connectors
without latch
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
2
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Ribbon Cable Connector Selection Guide (Continued)
Ribbon Cable Connector Selection Guide
.050" [1.27 mm]
Cable Pitch
(Continued)
Mates to .100" x .100"
Novo Type Female
Socket Connector
Pages 48-51
Mates to .100" x .100"
3-Row Eurocard
Type C & R
See Catalog 82721
Universal I/O
Pin Connectors
Pages 45 and 46
EUROLATCH
Receptacles
Page 47
Mates to .100" x .100"
2-Row Universal or
Low-Profile Headers
Pages 75-96
622 and 636
Series Female
Socket Connectors
Pages 52 and 53
Novo
Connectors
Pages 48-51
609 Series
Female
Socket Connectors
Pages 54 and 55
.050" [1.27 mm]
Cable Pitch
(Continued)
Mates to
2-Row DIP Sockets
or Solders to PCB
.100" x .100"
Footprint
609 Series
DIP Plugs
Page 56
622 and
636 Series
DIP Plugs
Page 57
TE Connectivity
DIP Plugs
Page 58
Solders to
.050" x .100"
4-Row PCB Footprint
.100" x .300"
Footprint
.100" x .600"
Footprint
TE Connectivity
DIP Plugs
Page 59
TE Connectivity
DIP Plugs
Page 60
Solder
Transition
Connectors
Page 61
3
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Introduction
Disclaimer
While TE has made every reasonable
effort to ensure the accuracy of the
information in this catalog, TE does
not guarantee that it is error-free, nor
does TE make any other representation,
warranty or guarantee that the information is accurate, correct, reliable or
current. TE reserves the right to make
any adjustments to the information
contained herein at any time without
notice. TE expressly disclaims all implied
warranties regarding the information
contained herein, including, but not
limited to, any implied warranties of
merchantability or fitness for a particular
purpose. The dimensions in this catalog
are for reference purposes only and
are subject to change without notice.
Specifications are subject to change
without notice. Consult TE for the latest
dimensions and design specifications.
© 2012, 2009, 1999, 1998, 1996, 1995,
1993, 1992, 1989, 1988, 1986, 1985,
1983, 1982, 1977, 1976, 1974 and 1973
Tyco Electronics Corporation.
All Rights Reserved.
AMP, AMPLIMITE, AMPMODU, CHAMP,
EUROLATCH, TE Connectivity and the
TE connectivity (logo) are trademarks
of the TE Connectivity Ltd. family of
companies.
Other logos, product and Company
names mentioned herein may be
trademarks of their respective owners.
Restriction on the use of Hazardous Substances
(RoHS)
At TE Connectivity, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■ Cross-Reference from
Non-compliant to Compliant Products
■ Ability to browse RoHS
Compliant Products in our
on-line catalog
■ Downloadable Technical Data
Customer Information
Presentation
■ More detailed information
regarding the definitions
used above
■ So whatever your questions when it comes to RoHS, we
have the answers at www.te.com/leadfree
RoHS
Customer
Support
Center
4
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Introduction (Continued)
Mass termination capabilities of the ribbon cable
connectors have helped
make ribbon cable, and
particularly .050 [0.127]
centerline cable, popular
within the Electronics
Industry. The ability to terminate up to 64 conductors
simultaneously, without
stripping or otherwise preparing the cable, presents
obvious labor savings.
Ribbon Cable Connectors
are wire-to-board devices
used to make the transition
between cable and pc
board circuitry. They find
heavy use within equipment
to connect one board to
another or one subsystem
to another. The connectors
are also used in input/output applications, connecting
different pieces of equipment.
Ribbon Cable Solutions are
available on three separate
cable centerline spacings.
They include:
ductor and the .0152 [0.382]
posts on .050 x .100 [1.27 x
2.54] grid. Also available in
paddleboard configurations.
.025 [0.64] Centerlines
System 50 receptacles
■ System 50 paddleboards
■ Pin headers
2.0 mm [.079] ribbon
cable receptacles feature
contacts on a true 2.0 mm
[.079 in.] mating grid for
1.0 mm [.039 in.] pitch
ribbon cable. Select
configurations are available
between 8 and 50-positions.
Receptacles feature
insulation displacement
contacts (IDC).
■
.039 [1.00] Centerlines
■ 2.0 mm receptacles
■ Breakaway pin headers
.050 [1.27] Centerlines
50/50 Grid connectors
■ Micro-MaTch connectors
■ Novo Receptacle
connectors
■ DIP plugs
■ EUROLATCH receptacle
connectors per DIN
41612 and IEC 603-2
■ Pin Headers
■
System 50 ribbon cable
receptacles will terminate
cable on .025 [0.64] centerlines. They are available in
select sizes from 20 thru
100-positions, and accept
wire size range 30 AWG
[0.05 mm2] solid or
stranded wire and 32 AWG
[0.03 mm2] stranded pvc
insulated wire. Housing and
cover are made of high temperature tolerant thermoplastic material, black, UL
94V-0 rated. A single mating
beam, phosphor bronze
contact provides the interconnect between the con-
50/50 Grid connectors
Although AMPMODU 50/50
Grid Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications, Right-angle
board-to-board and cableto-board applications are
also possible since the
vertical receptacles also
mate with non-latching
right-angle headers and the
vertical headers also mate
with non-latching cable connectors.
Micro-Match connectors
Miniaturization and the trend
towards higher density of
electronic functions on a
substrate led to the introduction of Micro-MaTch. The
system offers a range of
board and wire connectors,
enabling a variety of wire-to-
board and board-to-board
interconnections. Its design
prevents the traditional
failure mode in tin-plated
connections, fretting corrosion. An additional positioning spring in the female part
absorbs relative movements
caused by vibrations and
thermal expansion between
male and female contacts.
By preventing movements
on the contact spot, a gas
tight connection can be
guaranteed under all
circumstances.
Novo receptacles feature
two rows of contacts on
.100 x .100 [2.54 x 2.54]
centers on selected sizes
of 10 thru 64-positions
and mate with .025 [0.64]
square or round posts. The
Novo tuning-fork contact
offers a military-approved
design, at an affordable
cost. Polarization options
include military, center and
military, or dual bar.
DIP (Dual In-Line Package)
plugs provide a permanent
connection of ribbon cable
to a pc board or mating
to DIP sockets. Using the
same centerline dimensions
as DIP integrated circuits,
DIP plugs offer space
efficiency and a low profile
of .253 [6.43].
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all TE products. They can
provide you with:
■ Technical Support
■ Catalogs
■ Technical Documents
■ Product Samples
■ TE Authorized Distributor
Locations
5
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Table of Contents
Ribbon Cable Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
Board-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Ultra ATA Bus Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
.039 [1.00] Centerline Ribbon Cable Connectors
2 mm [.079] Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17
AMPMODU 50/50 Grid Connector System
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Board-to-Board Vertical Receptacles and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . 21
Recommended PC Board Layouts for Vertical Connectors . . . . . . . . . . . . . . . . . . . . . 22
Board-to-Board Right-Angle Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27]
Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27]
Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Terminating Covers for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Application Tooling for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Technical Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Micro-MaTch Connector System
Miniature Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
System Overview/Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Applications (3 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Applications (2 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Female-on-Board Connector, Top Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Female-on-Board Connector, Side Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Female-on-Board Connector Surface Mount Device (SMD) . . . . . . . . . . . . . . . . . . . . . 36
Male-on-Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Male-on-Wire Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Paddle Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Crimp On Snap In (COSI) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43
Lead Assembly and Sample Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
.050 [1.27] Centerline Ribbon Cable Connectors
Universal I/O Pin Connectors without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Universal I/O Pin Connectors with Slotted Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . 46
EUROLATCH Receptacles 64-Position (Three-Row Housings, Two Rows Loaded) . . . . 47
Novo Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-51
Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Center and Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . 50
Dual Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series . . . 52, 53
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . 54, 55
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . . . . . . . . . . . . . . . . 56
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series . . . . . . . . . . . . . . . . . . . . . . . . 57
6
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Table of Contents (Continued)
.050 [1.27] Centerline Ribbon Cable Connectors (Continued)
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4-Row PCB Solder Transition Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1-Row Horizontal Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Accessories
Flexible Pull Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Universal I/O Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Military Polarizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Strain Relief for 622 Series DIP Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Pull Loops, Permanent (For Receptacles and Pin Connectors) . . . . . . . . . . . . . . . . . . . 66
Strain Relief for Universal I/O without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Strain Relief for 609 Series (Tulip Contact) Female Socket Connectors . . . . . . . . . . . . . 67
Strain Relief for Novo and Ultra ATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Strain Relief for 2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Strain Relief for 622 and 636 Series Female Socket Connectors . . . . . . . . . . . . . . . . . . 69
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74
Low Profile Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-83
Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]
Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77
Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]
Centerlines and “Kinked” Solder Tails for PCB Retention . . . . . . . . . . . . . . . . . . . 78, 79
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . 80, 81
IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100
[2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
Universal Ejection Style Pin Headers and Pinless Headers
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-86
Universal Ejection Style Pin Headers, ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . 87, 88
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines, Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . 89-91
Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93
Universal Ejection Style Pin Headers, with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) . . . . . . . . . . . . . . . . 94, 95
Latches for Ejection Style Universal Pin Headers and Pinless Headers . . . . . . . . . . . . . 96
Cable Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97, 98
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
7
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Cable-to-Board Connectors
Product Facts
■
Preassembled housing and
cover
■
One-step termination
■
End and daisy chain
termination
■
Positive end latching of
connector to universal
header
■
Terminates 30 AWG
[0.05 mm2] solid or
stranded and 32 AWG
[0.03 mm2] stranded
.025 [0.64] centerline
ribbon cable with PVC
insulation
■
Connectors are RoHS
compliant
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■
Certified by the
Canadian Standards
Association,
File No. LR 7189
R
R
The System 50 Ribbon
Cable connector is a
receptacle connector that
will terminate ribbon cable
on .025 [0.64] centerlines.
It is available in select sizes
from 10 to 100 positions
and will accommodate 30
AWG [0.05 mm2] solid or
stranded and 32 AWG
[0.03 mm2] stranded
conductors with PVC cable
insulation.
The housing and cover
are of a high temperature
tolerant thermoplastic
(black) with a UL 94V-0
rating. A phosphor bronze
single mating beam contact
provides the interconnect
between the conductor and
the .015 [0.38] square posts
on the .050 x .100
[1.27 x 2.54] grid. The
contacts are plated with
30 gold duplex plating. The
latching feature is located
on the receptacle, not the
header, and saves board
space and eliminates future
problems of “latch height
compatibility.”
8
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
System 50 Cable-to-Board Connectors,
.025 [0.64] Centerline Ribbon Cable (Continued)
Double Row Receptacle
.254 .228
[6.45] [5.79]
A
.054
[1.37]
.430
[10.92]
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Latches — Stainless steel
Contacts — Phosphor bronze, plated
30 microinch gold over nickel with tin
in termination area
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Cable-to-Board Connectors
.580
[14.73]
Before
Termination
Cover
B
Latch
C
.198
[5.03]
.228
[5.80]
.246
[6.25]
.100
[2.54]
Contact
.335
[8.51]
Housing
.102
[2.59]
E
Position #1
Indicator
F
.100
[2.54]
Related Product Data
Mateable Connectors —
See AMP Catalog 82178
See Part Numbers 104068 and 104069
Series on pages 10 and 11
Mates with Posts — .015 [0.38]
square, .125 [3.18] long, on
.050 x .100 [1.27 x 2.54] grid
No. of
Pos.
10
14
16
Technical Documents
Product Specification
108-1109
Application Specification
114-25029
.050 Typ.
[1.27]
D
20
24
26
30
34
40
44
50
60
64
68
72
80
100
A
.510
12.95
.610
15.49
.660
16.76
.760
19.30
.860
20.32
.910
23.11
1.010
25.65
1.110
28.19
1.260
32.00
1.360
34.54
1.510
38.35
1.760
44.70
1.860
47.24
1.960
49.78
2.060
52.32
2.260
57.40
2.760
70.10
B
.445
11.30
.545
13.84
.595
15.11
.695
17.65
.795
20.19
.845
21.46
.945
24.00
1.045
26.54
1.195
30.35
1.295
32.89
1.445
36.70
1.695
43.05
1.795
45.59
1.895
48.13
1.995
50.67
2.195
55.75
2.695
68.45
Dimensions
C
D
.225
.200
5.72
5.08
.325
.300
8.26
7.62
.375
.350
9.52
8.89
.475
.450
12.07
11.43
.575
.550
14.61
13.97
.625
.600
15.88
15.24
.725
.700
18.42
17.78
.825
.800
20.96
20.32
.975
.950
34.54
24.13
1.075
1.050
27.31
26.67
1.225
1.200
31.12
30.48
1.475
1.450
37.47
36.83
1.575
1.550
40.00
39.37
1.675
1.650
42.55
41.91
1.775
1.750
45.08
44.45
1.975
1.950
50.17
49.53
2.475
2.450
62.87
62.23
E
.096
2.44
.146
3.71
.171
4.34
.221
5.61
.271
6.88
.296
7.52
.346
8.79
.396
10.06
.471
11.96
.521
13.23
.596
15.14
.721
18.31
.771
19.58
.821
20.85
.871
22.12
.971
24.66
1.221
31.01
F
.294
7.47
.394
10.01
.444
11.28
.544
13.82
.644
16.36
.694
17.63
.794
20.17
.894
22.71
1.044
26.52
1.144
29.06
1.294
32.87
1.544
39.22
1.644
41.76
1.744
44.30
1.844
46.84
2.044
51.92
2.544
64.62
Part Number
2-111196-5
2-111196-6
2-111196-7
1-111196-8
2-111196-8
2-111196-9
1-111196-9
3-111196-0
2-111196-0
3-111196-1
2-111196-1
2-111196-2
3-111196-2
3-111196-4
2-111196-3
3-111196-3
2-111196-4
See Application Specification for termination tooling.
Note: All part numbers are RoHS compliant.
9
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
System 50 Board-to-Board Connectors, Through-Hole Headers
Shrouded,
Double Row
Vertical
.015
[0.38]
.390
[9.91]
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Board-to-Board Connectors
.055*
[1.40]
.060
[1.52]
2 Plc.
Circuit Identification
Feature**
A
.050
[1.27] Typ.
.092
[2.34]
.100
[2.54]
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Contacts — Copper alloy, plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127] nickel
.284
[7.21]
.344
[8.74]
.100
[2.54]
Related Product Data
Mateable Receptacles — page 9
Technical Documents
Product Specification
108-1093
Application Specification
114-25031
No. of
Positions
10
12
14
16
20
24
26
30
Dim.
A
.380
9.65
.430
10.92
.480
12.19
.530
13.46
.630
16.00
.730
18.54
.780
19.81
.880
22.35
Part
Number
No. of
Positions
5-104068-2
34
5-104068-8
40
5-104068-9
44
6-104068-0
50
5-104068-1
60
6-104068-1
68
6-104068-2
72
5-104068-3
80
**Point of measurement for gold thickness.
**Circuit identification feature omitted on 8, 10, 12 and 14
position headers.
Note: All part numbers are RoHS compliant.
100
Dim.
A
.980
24.89
1.130
28.70
1.230
31.24
1.380
35.05
1.630
41.40
1.830
46.48
1.930
49.02
2.130
54.10
2.630
66.80
Part
Number
6-104068-3
5-104068-4
6-104068-4
5-104068-5
5-104068-6
6-104068-8
6-104068-5
6-104068-6
6-104068-7
10
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
System 50 Board-to-Board Connectors, Through-Hole Headers (Continued)
Shrouded,
Double Row
Right-Angle
.100
[2.54]
at Post
Tips
.055*
[1.40]
.160 [4.06]
at Post Tips
.540
[13.72]
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Board-to-Board Connectors
.408
[10.36]
Hold down
post
.060
[1.52]
2 Plc.
Circuit Identification
Feature**
.100
[2.54]
A
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Contacts — Copper alloy, plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127] nickel
.050
Typ.
[1.27]
.290
[7.37]
Related Product Data
.350
[8.89]
Mateable Receptacles — page 9
.100
[2.54]
Technical Documents
Product Specification
108-1093
Application Specification
114-25031
Note 2
Note 1
No. of
Positions
8
10
20
24
26
30
34
Dim.
A
.330
8.38
.380
9.65
.630
16.00
.730
18.54
.780
19.81
.880
22.35
.980
24.89
Part
Number
No. of
Positions
5-104069-8
40
5-104069-4
50
5-104069-1
60
6-104069-2
68
6-104069-3
72
5-104069-5
80
6-104069-4
100
Dim.
A
1.130
28.70
1.380
35.05
1.630
41.40
1.830
46.80
1.930
49.02
2.130
54.10
2.630
66.80
Part
Number
5-104069-6
5-104069-2
5-104069-7
6-104069-8
6-104069-6
5-104069-3
6-104069-7
**Point of measurement for gold thickness.
**Circuit identification feature omitted on 8, 10, 12 and
14 position headers.
Notes: 1. Hold down posts located as shown for
16 through 100 position headers.
Notes: 2. Hold down posts located as shown for
8 through 14 and 60 through 100 position
headers.
Notes: 3. All part numbers are RoHS compliant.
11
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
Paddleboard
A
.273
[6.93]
(Terminated)
Material and Finish
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Cable-to-Board Connectors
Housing — LCP thermoplastic,
UL 94V-0 rated, black
Cover — Polyester, UL 94V-0 rated,
black
Contacts — Phosphor bronze, plated
.000100 [0.00245] min. tin over .000050
[0.00127] min. nickel underplating
Technical Documents
Product Specification
108-1109
Application Specification
114-25040
.050
[1.27]
Position 1
Indicator
.168
[4.27]
.024 Typ. .050 Typ.
[1.27]
[0.61]
B
.100
[2.54]
.020
[0.51]
.008
[0.20]
Typ.
.040
[1.02]
.050
Typ.
[1.27]
.075
Typ.
[1.91]
Printed Circuit Board Hole Layout #1
14
1
16
2
20
2
24
2
26
1
28
2
30
1
34
1
40
2
.031
Typ.
[0.79]
.304
[7.72]
.075
Typ.
[1.91]
1
.030
Standoffs
[0.76]
(Various Locations)
B
.031
Typ.
[0.79]
.304
[7.72]
10
.304
[7.72]
.118
[3.00]
B
PCB
Layout
.075 Typ.
[1.91]
.045
[1.19]
Ref.
.050
Typ.
[1.27]
No. of
Pos.
.340
[8.64]
(Unterminated)
Dimensions
A
B
.436
.200
11.07
5.08
.536
.300
13.61
7.62
.586
.350
14.88
8.89
.686
.450
17.42
11.43
.786
.550
19.96
13.97
.836
.600
21.23
15.24
.886
.650
22.50
16.51
.936
.700
23.77
17.78
1.036
.800
26.31
20.32
1.186
.950
30.12
24.13
Kinked
Legs
Printed Circuit Board Hole Layout #2
No. of
Pos.
PCB
Layout
5111595-1
44
2
5111595-2
46
1
5111595-3
50
1
5111595-4
60
2
5111595-5
64
2
5111595-6
68
2
2-5111595-0
72
2
5111595-7
80
2
5111595-8
100
2
5111595-9
Dimensions
A
B
1.286
1.050
32.66
26.67
1.336
1.100
33.93
27.94
1.436
1.200
36.47
30.48
1.686
1.450
42.82
36.83
1.786
1.550
45.36
39.37
1.886
1.650
47.90
41.91
1.986
1.750
50.44
44.45
2.186
1.950
55.52
40.53
2.686
2.450
68.22
62.23
Kinked
Legs
1-5111595-0
1-5111595-7
1-5111595-1
1-5111595-2
1-5111595-3
1-5111595-9
1-5111595-4
1-5111595-5
1-5111595-6
See Application Specification for termination tooling.
Note: All part numbers are RoHS compliant.
12
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable
Product Facts
IDC termination
■
Backward compatible with
current IDE Interfaces
■
Improved signal integrity:
1 to 1 signal to ground ratio
■
Improved crosstalk when
compared to existing IDE
Cable Assembly
■
Color coded connectors
for “System board,” and
“Master HDD” and
“Slave HDD”
■
Cable impedance 80 ohms
■
Up to 3 connectors per cable
assembly
■
15 microinches gold plating
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■
■
Certified by the
Canadian Standards
Association,
File No. LR 7189
.025 [0.64] Centerline Ribbon Cable Connectors
Ultra ATA Bus Connectors
■
R
R
Terminates 30 AWG solid or
stranded PVC insulated 80
conductor ribbon cable
Ultra ATA is the next generation IDE (Integrated Drive
Electronics) bus. The current
IDE bus has a maximum
data transfer rate of about
16.5 MB/second. As the bus
speeds and disk drive performances increase, the
cable assembly between
the motherboard and hard
drive becomes a limiting
factor in data transfer from
the drive.
The Ultra ATA connector
and cable assembly from
TE provide the customer
with improved electrical
performance by creating a
1:1 signal-to-ground ratio.
The connector design incorporates an IDC bus bar to
common the 40 additional
ground signals. The cable is
.025" centerline PVC ribbon
cable. The connector is fully
backward compatible with
existing 40-position headers
with pin 20 removed on
motherboards and disk
drives.
The new connectors are
color coded to identify:
1. system board connector
2. primary or master hard
drive connector
3. slave drive connector
Standard Issues
The Ultra ATA cable performance specification is
part of the Small Form
Factor Committee No. 8049.
Compaq Computer and
Western Digital are the
major sponsors of the
standard.
Contacts Available:
80 position IDC contact
terminations
■ 40 signal contacts
■ 40 ground terminations to
special IDC bus bar
■
13
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Related Product Data
.420
[10.67]
Strain Relief — Part Number 4992521
Mateable Headers — page 15
.492
Max.
[12.50]
Terminated View
2.186
[55.52]
Material & Finish
.240
[6.10]
Cover
Ground
Bus Bar
Housing
Pos. No. 1
Indicator
.610
Ref.
[15.49]
Odd Gnd
.025 [0.64] Centerline Ribbon Cable Connectors
Ultra ATA Bus Connectors
Housing and Cover —
Thermoplastic, UL 94 V-0 rated, color
per table
Contacts — Phosphor bronze, plated
gold per table on mating end, .000050
[0.00127]min. tin in wire termination
area, over .000050 [0.00127] min nickel
on entire contact.
Optional Center*
Polarizer Bar
Signal
Contacts
Contact
Technical Documents
Product Specification
108-1740
Application Specification
114-40056
See Application Specification for
termination tooling.
Accessories
Strain Relief — page 68
Keying Plug — page 64
Pull Loops — page 66
Pull Tabs — page 63
Connector Type
“System” Board
“Primary” or “Master”
“Slave”
.100
[2.54]
.100
[2.54]
Circuit 20
Molded Shut
1.90
[48.26]
Position 1
Color Coded
Conductor No. 1
Position 1
Position 1
Pin 34
Conductor Cut
per SFF-8049
Configuration A
“System” Board
Connector
“Master” or
“Primary”
Connector
“Slave”
Connector
Configuration B
“System” Board
Connector
“Slave”
Connector
“Master” or
“Primary”
Connector
*Center & Military Polarized
Housing
Color
1658619-2
Blue
1658619-1
Black
1658619-3
Gray
15µ" Gold
Cover
Color
Black
Black
Black
15µ" Gold
1658618-2
1658618-1
1658618-3
Military Polarized
Housing
Color
Blue
Black
Gray
Cover
Color
Black
Black
Black
Notes: 1. All connectors are “ODD GROUND” configuration, ie. all odd cable conductors are grounded. “EVEN GROUND” connectors are not available.
See Customer Drawings for detailed electrical connection descriptions.
2. All part numbers are RoHS compliant.
14
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Ultra ATA
Compatible Headers
Universal Headers — Pin 20 Omitted
Post
Type
Housing
Material
Latch
Type
Part
Number
Contact Finish
(Plating Code)
Vertical
Nylon or PBT
Long
5111824-9
D
Vertical
Nylon or PBT
Short
6489700-1
B
Contact Finish
(Plating Code)
Solder Tail
Length
.110
2.79
.123
3.12
Comments
PP
Legend: PP — Polarization Peg
.025 [0.64] Centerline Ribbon Cable Connectors
Ultra ATA Bus Connectors
Low Profile Headers — Pin 20 Omitted
Post
Type
Housing
Material
Latch
Type
Part
Number
Vertical
Nylon
None
1888188-1
A
Vertical
Nylon
None
1888188-2
B
Vertical
Nylon 6T
None
2-1734161-4
C
Vertical
Nylon 6T
None
2-1734161-5
C
Vertical
Nylon
None
1734162-2
C
Vertical
Nylon
None
1734162-4
C
Solder Tail
Length
.120
3.05
.120
3.05
.122
3.10
.122
3.10
.110
2.79
.110
2.79
Housing
Color
Black
Black
Black
Blue
Black
Blue
Plating Code A — Duplex plated, gold flash on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire
post underplated .000050 [0.00127] min. nickel.
Plating Code B — Duplex plated, gold flash over palladium-nickel, .000015 [0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015
[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated
.000050 [0.00127] min. nickel.
Plating Code C — Gold flash over nickel underplate on entire post.
Plating Code D — Duplex plated, gold flash over palladium-nickel, .000030 [0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015
[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated
.000050 [0.00127] min. nickel.
Note: All part numbers are RoHS compliant.
15
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Ribbon Cable Interconnect Solutions
Dimensions are
millimeters over inches
2.0 mm [.079] Receptacle Connectors
.039 [1.00] Centerline Ribbon Cable Connectors
.079 [2.00] Receptacle Connectors
Product Facts
■
True hard metric 2.0 x 2.0
[.079 x .079] mating grid for
1.0 [.039] pitch ribbon cable
■
Wide selection of
configurations, 8-50
positions
■
Insulation displacement
(IDC), beryllium copper
contacts, duplex plated
gold-over-nickel
■
Top/bottom single beam
contact orientation
■
UL 94V-0 rated thermoplastic components
■
Assemblies are furnished
preassembled with
termination covers
■
Optional polarization
■
Optional strain relief
available
■
Connector assemblies
packaged for ease of
handling and protection
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■
Certified by the
Canadian Standards
Association,
File No. LR 7189
Performance Data
Durability — 150 cycles
Termination Resistance —
25 milliohms max.
Mating Force —
1.67 N max. per contact
Unmating Force —
0.14 N min. per contact
Operating Temperature —
-65°C to +105°C
Technical Documents
Product Specification
108-1372
Application Specification
114-40038
R
R
The 2.0 [.079] receptacle
connector family features
contacts on a true 2.0 x 2.0
[.079 x .079] mating grid
for 1.0 [.039] pitch 28 AWG
ribbon cable. A variety of
configurations are available
from 8 through 50 positions.
This small, compact
connector is finding wide
acceptance throughout the
electronic industry, particularly in the smaller laptop
and notebook type computers with 63.5 [2.5] drives.
Other areas of application
include point-of-sale terminals, fax machines, photocopiers, printers, consumer
electronics, and other computer peripheral equipment.
These receptacles feature
insulation displacement
contacts (IDC) with a
top/bottom single-beam
contact orientation.
Contacts are beryllium
copper, duplex plated
0.00076 [.000030] gold
in the mating area and
0.00254 [.000100] min.
tin on termination end, all
over 0.00127 [.000050]
nickel underplating. Contact
mating area is 1.54 [.061]
from the face of the housing
and they accept 0.50mm
[.0197] round or square
posts.
Housings are made of
UL 94V-0 rated polyester
with optional center bar
polarization. Complete
assemblies are furnished
preassembled with termination covers. The complete
assembly presents a compact design only 5.2 [.203]
wide over the termination
cover by 4 [.157] deep by
4 [.157] wide mating end.
Terminated height is 8.48
[.334]. Optional strain relief
available. Assemblies are
packaged for ease of
handling and protection.
16
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
2.0 mm [.079] Receptacle Connectors,
Non-Polarized and Center Polarized Bar
Material and Finish
A
Housing and Termination Cover —
UL 94V-0 rated polyester, black
Contacts — Beryllium copper, duplex
plated 0.00076 [.000030] min. gold on
mating end, 0.00013 [.000005] min.
gold on termination end, all underplated
0.00127 [.000050] min. nickel
Note: Accepts 0.08-0.09mm2 [28 AWG]
ribbon cable, PVC insulated 1.00 [.039]
pitch. See Application Specification for
details.
5.16
[.203]
Optional Center Polarizer Bar
.039 [1.00] Centerline Ribbon Cable Connectors
.079 [2.00] Receptacle Connectors
1.54
[.061]
10.24
[.403]
Technical Documents
Product Specification
108-1372
Application Specification
114-40038
4.000
[.1575]
5.00
[.197]
Position Number
1 Indicator
B
Mateable Connectors — pages 9
and 12, or see Application Specification
for header requirements
Position Number 1
1.90 ± 0.05
[.075 ± .002]
2.00
[.079]
Typ.
Accessories
8.48
[.334]
Pull Loops — page 66
Keying Plugs — page 64
Strain Relief — page 68
2.00
[.079]
Typ.
Terminated View, Typical
No. of
Positions
8
10
12
14
16
20
22
24
26
30
34
40
44
50
Dimensions
A
B
13.18
8.41
.519
.331
15.16
10.41
.597
.410
17.15
12.40
.675
.488
19.18
14.40
.755
.567
21.18
16.41
.834
.646
25.17
20.40
.991
803
27.18
22.40
1.070
.882
29.18
24.41
1.149
.961
31.17
26.42
1.227
1.040
35.18
30.40
1.385
1.197
39.17
34.42
1.542
1.355
45.19
40.41
1.779
1.591
49.17
44.40
1.936
1.748
55.17
50.39
2.172
1.984
Center
Polarized
Non-Polarized
3-111623-0
2-111626-4
1-111623-8
1-111626-7
3-111623-1
—
1-111623-9
1-111626-8
2-111623-0
2-111626-5
2-111623-1
1-111626-9
2-111623-9
—
2-111623-7
2-111626-6
2-111623-2
2-111626-7
2-111623-3
—
2-111623-8
2-111626-0
2-111623-4
2-111626-1
2-111623-5
2-111626-2
2-111623-6
2-111626-3
Note: All part numbers are RoHS compliant.
17
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
AMPMODU 50/50 Grid Connector System
Right-Angle Headers,
Board-to-Board (Page 24)
Vertical Headers,
Board-to-Board
(Page 21)
Receptacles,
Cable-to-Board,
With Latch
(Page 26)
Board-to-Board Vertical
Receptacles and Headers
Vertical Receptacles,
Board-to-Board
(Page 20)
Receptacles,
Cable-to-Board
Without Latch
(Page 26)
Vertical Headers,
Board-to-Board
(Page 21)
Vertical Headers,
Board-to-Board
(Page 21):
.250 [6.35] Stack Height
.320 [8.13] Stack Height
.390 [9.91] Stack Height
Vertical Receptacles,
Board-to-Board
(Page 20)
Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
ISO900e1d
i
rtif
Ce
18
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Receptacles and Headers
Product Facts
■ Surface-mount
R
R
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications.
Right-angle board-to-board
and cable-to-board
applications are also
possible, since the vertical
receptacles also mate with
non-latching right-angle
headers (page 24) and the
vertical headers also mate
with non-latching cable
connectors.
Available are double row,
vertical shrouded headers
and receptacles in sizes
ranging from 10 through
100 positions (in 10 position
increments).
Parallel board-to-board
stack heights of .250 [6.35],
.320 [8.13] and .390 [9.91]
are achievable by selection
of the appropriate header.
The receptacle is the same
for all three stack height
headers.
PC boards and allow
surface mounting to both
sides of the board. In
addition to providing
retention during processing,
the holddowns are soldered
during reflow and therefore
provide
long-term strain relief for
the solder joints.
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
to be compatible with
standard surface-mount
processes; IR (infrared) and
VPR (vapor phase reflow).
The surface-mount
connectors have been
designed so that
dimensioning, tolerances,
referenced datums,
Board-to-Board Vertical
Receptacles and Headers
products for
parallel board-to-board
applications, as well as
right-angle board-to-board
and cable-to-board
applications
■ High density .050 x .050
[1.27x1.27] centerline grid
■ Three board-to-board stack
heights: .250 [6.35], .320
[8.13] and .390 [9.91]
■ Non-protrusive metallic
holddowns
■ Reliable dual beam
receptacle contacts for
redundant contact
■ Duplex plated receptacle
and post contacts; gold
plated on mating areas,
tin plated on tails
■ Compatible with standard
surface-mount processing
(VPR and IR)
■ Receptacle and header allow
for drainage of
processing fluids
■ Tape and reel packaging
available. Contact
TE for details
■ Polarized header and
receptacle assemblies
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by
Canadian Standards
Association
File No. LR7189
holddown characteristics
and packaging methods
result in a system that is
compatible with robotic
assembly.
The headers and receptacles
feature polarization to
prevent misalignment.
Three Board Stack Heights
.250±.006
[6.35±0.15]
.320±.006
[8.13±0.15]
Non-Protrusive
Metallic Holddowns
.390±.006
[9.91±0.15]
Non-protrusive metallic
holddowns are designed for
use in .062 [1.57] or thicker
19
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centerline
A
.120
[3.05]
.028
[0.71]
Material and Finish
.050
[1.27]
Vertical Receptacles, Double Row
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Polarizing Tab
(For Polarization to
Mating Header)
.187
[4.75]
.050
[1.27]
.050
[1.27]
Related Product Data
Mating Headers — pages 21 and 24
PC Board Layouts — page 22
Performance Specifications —
page 29
Technical Documents — page 29
Product Specification 108-1332
Application Specification
114-7010
Packaging — Tube or Tape and Reel
No. of
Pos.
Dimension
A
10
20
30
40
50
60
70
80
100
.266 [6.75]
.516 [13.11]
.766 [19.46]
1.016 [25.81]
1.266 [32.16]
1.516 [38.51]
1.766 [44.86]
2.016 [51.21]
2.516 [63.91]
Tube
5-104652-1
5-104652-2
5-104652-3
5-104652-4
5-104652-5
5-104652-6
5-104652-7
5-104652-8
6-104652-0
Receptacle
Part Numbers
Tape and Reel*
No Hold Down w/Vacuum Cover
5-147384-1
5-147413-1
5-147384-2
5-147413-3
5-147384-3
5-147413-4
5-147384-4
—
5-147384-5
5-147413-2
5-147384-6
—
5-147384-7
—
5-147384-8
—
5-147384-9
—
* Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 22.
Note: All part numbers are RoHS compliant.
20
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
.050
[1.27]
.225
[5.71]
.050
[1.27]
A
.2255
[5.728]
For .250 [6.35] Mated Height
.030
[0.76]
.050
[1.27]
A
For .320 [8.13] Mated Height
.2975
[7.557]
.050
[1.27]
.030
[0.76]
.050
[1.27]
Vertical Headers, Double Row
.030
[0.76]
A
.3675
[9.335]
For .390 [9.91] Mated Height
Material and Finish
Related Product Data
Technical Documents — page 29
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Mating Receptacles — pages 20 and
26 (without latch only)
PC Board Layouts — page 22
Performance Specifications — page
29
Product Specification 108-1332
Application Specification
114-7010
Packaging — Tube or Tape and Reel
No. of
Pos.
10
20
30
40
50
60
70
80
90
100
Dimension
A
.372 [9.44]
.622 [15.79]
.872 [22.14]
1.122 [28.49]
1.372 [34.84]
1.622 [41.19]
1.872 [47.54]
2.122 [53.89]
2.372 [60.24]
2.622 [66.59]
.250 [6.35] Mated Height
Tape & Reel*
Tubes
Hold Down No Hold Down
5-104655-1
5-147381-1
5-147121-1
5-104655-3
5-147381-2
5-147121-2
5-104655-4
5-147381-3
—
5-104655-5
5-147381-4
—
5-104655-6
5-147381-5
—
5-104655-7
5-147381-6
—
5-104655-8
5-147381-7
—
5-104655-9
5-147381-8
—
—
—
—
6-104655-1
5-147381-9
—
Header Part Numbers
.320 [8.13] Mated Height
Tubes
Tape & Reel*
5-104656-1
5-104656-2
5-104656-3
5-104656-4
5-104656-5
5-104656-6
5-104656-7
5-104656-8
5-104656-9
6-104656-0
5-147382-1
5-147382-2
5-147382-3
5-147382-4
5-147382-5
5-147382-6
5-147382-7
5-147382-8
—
5-147382-9
.390 [9.91] Mated Height
Tubes
Tape & Reel*
Hold Down No Hold Down
5-104693-1
—
5-147383-1
5-104693-2
—
5-147383-2
5-104693-3
—
5-147383-3
5-104693-4
—
5-147383-4
5-104693-5
—
5-147383-5
5-104693-6
—
5-147383-6
5-104693-7
—
5-147383-7
5-104693-8
—
5-147383-8
5-104693-9
—
—
6-104693-0
5-147503-1
5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 22.
Note: All part numbers are RoHS compliant.
21
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Recommended PC Board Layouts for Vertical Connectors
Headers
.029
[0.74]
.050
[1.27]
B Spaces at .050 [1.27] = C
.162
[4.11]
.010
[0.25]
4 Plc.
C
L of Pattern
Detail A
.182
[4.62]
.091
[2.31]
.047
[1.19]
2 Plc.
.061
[1.54]
Detail A
D
Receptacles
.029
[0.74]
.050
[1.27]
.110
[2.79]
Recommended PC Board Layouts
B Spaces at .050 [1.27] = C
C
L of Pattern
.130
[3.30]
.065
[1.65]
Detail A
.060
[1.52]
D
No. of
Pos.
B
10
20
30
40
50
60
70
80
90
100
4
9
14
19
24
29
34
39
44
49
Receptacle Dimensions
C
D
.200 [5.08]
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
.320 [8.12]
.570 [14.48]
.820 [20.83]
1.070 [27.19]
1.320 [33.53]
1.570 [39.88]
1.820 [46.23]
2.070 [52.58]
2.320 [58.93]
2.570 [65.28]
B
4
9
14
19
24
29
34
39
44
49
Header Dimensions
C
.200 [5.08]
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
D
.322 [8.17]
.572 [14.52]
.822 [20.87]
1.072 [27.22]
1.322 [33.57]
1.572 [39.92]
1.822 [46.27]
2.072 [52.62]
2.322 [58.97]
2.572 [65.32]
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
22
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Right-Angle Headers
Product Facts
■ Surface-mount
R
R
AMPMODU 50/50 Grid
Right-Angle Headers will
accommodate a variety of
high density packaging
applications; right-angle
board-to-board applications
when mated with vertical
receptacles (page 20) and
right-angle cable-to-board
applications when mated
with cable connectors
(page 26). The small
.050 x .050 [1.27 x 1.27]
centerline contact spacing
allows efficient use of the
PC board area.
Mechanical support of the
headers to the PC board is
provided by non-protrusive
metallic holddowns
designed for .062 [1.57] or
thicker PC boards. These
holddowns are of the same
design as those used in the
vertical headers (page 21)
and receptacles (page 20).
There are also metallic tabs
that are soldered to the surfaces of the PC board pads
for added support.
Board-to-Board Right-Angle Headers
products for
right-angle board-to-board
and cable-to-board
applications
■ Double-row, right-angle
shrouded headers
■ High density .050 x .050
[1.27 x 1.27] centerline grid
■ Latching and non-latching
versions available
■ Non-protrusive metallic
holddowns
■ Metallic tabs, when
soldered to PC board pad,
provide added mechanical
support
■ Duplex plated post contacts;
gold plated on mating area,
tin plated on tails
■ Compatible with standard
surface-mount processing
(VPR and IR)
■ Standoffs on header
housings allow for drainage
of processing fluids
■ All headers are polarized
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by Canadian
Standards
Association
File No. LR7189
AMPMODU 50/50 Grid
Right-Angle Headers are
available in double-row, in
either latching or nonlatching versions, and in
sizes ranging from 10
through 100 positions (in 10
position increments). The
latching version provides
positive retention when
mated with the latching
cable connector (page 26).
All headers feature polarization to help prevent misalignment during mating.
23
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Right-Angle Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Non-Latching Header
A
.050
[1.27]
Typ.
.050
[1.27]
.213
[5.41]
Latching Header
.352
[8.94]
.050
[1.27]
.430
[10.92]
.029
[0.74]
Typ
Material and Finish
.065
[1.65]
Typ.
Right-Angle Headers, Double Row,
Latching and Non-Latching
Housing — Liquid crystal polymer,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.000381] tin on
solder tail, with entire contact underplated .000050 [0.00127] nickel
Holddown — Copper alloy; plated
.0000150 [0.00381] tin over .000050
[0.00127] nickel
.047 Dia
[1.19]
Plated-Thru Hole
(2 Plc)
B Spaces at
.025 C
=
[0.64]
.140
[3.56]
.085
[2.16]
.340
[8.64]
.305
[7.75]
.175
[4.45]
.100
[2.54]
Min
Related Product Data
Mating Receptacles — pages 20
and 26
Performance Specifications —
page 29
.063
[1.57]
(2 Plc)
D
.190
[4.83]
(2 Plc)
.136
[3.45]
(2 Plc)
Recommended PC Board Layout
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
Technical Documents — page 29
Product Specification 108-1443
Application Specification
114-7010
Packaging — Tube
No. of
Pos.
A
B
10
20
30
40
50
60
70
80
100
.630 [16.00]
.880 [22.35]
1.130 [28.70]
1.380 [35.05]
1.630 [41.40]
1.880 [47.75]
2.130 [54.10]
2.380 [60.45]
2.880 [73.15]
9
19
29
39
49
59
69
79
99
Dimensions
C
.225 [5.72]
.475 [12.07]
.725 [18.42]
.975 [24.77]
1.225 [31.12]
1.475 [37.47]
1.725 [43.82]
1.975 [50.17]
2.475 [62.87]
D
.550 [13.97]
.800 [20.32]
1.050 [26.67]
1.300 [33.02]
1.550 [39.37]
1.800 [45.72]
2.050 [52.07]
2.300 [58.42]
2.800 [71.12]
Header
Part Numbers
Latching
Non-Latching
5-104895-1
5-104894-1
5-104895-2
5-104894-2
5-104895-3
5-104894-3
5-104895-4
5-104894-4
5-104895-5
5-104894-5
5-104895-6
5-104894-6
5-104895-7
5-104894-7
5-104895-8
5-104894-8
6-104895-0
6-104894-0
Note: All part numbers are RoHS compliant.
24
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable-to-Board Connectors
Product Facts
■ Double-row
R
R
These double-row cable
connectors, with a .050 x
.050 [1.27 x 1.27] centerline
contact spacing, provide
cable-to-board connection
capabilities for the
AMPMODU 50/50 Grid
Connector System. Cable
connectors without a latch
will mate with the vertical
headers (page 21), while
cable connectors with or
without a latch can be used
to mate with the right-angle
headers (page 24).
The cable connectors
feature reliable singlebeam IDC (insulation
displacement crimp)
contacts which are duplex
plated with .000030
[0.00076] gold. These
contacts can be mass
terminated to either solid or
stranded round conductor
ribbon cable with conductor
sizes of 28 AWG [0.08-0.09
mm2] and 30 AWG [0.05
mm2] and a maximum
insulation diameter of .036
[0.91]. During termination,
the terminating covers,
which must be purchased
separately, assist in guiding
the wire into the IDC
contacts, then provide
strain relief when fully
seated. Actual termination
is accomplished with the TE
manual tooling shown on
page 28.
mounted right-angle header.
The cable connector without
a metal latch features
polarization to help prevent
mismating. All connectors
are available in sizes
ranging from 10 through
100 positions (in 10 position
increments).
Cable-to-Board Connectors
receptacle
connectors provide cableto-board connection
capabilities for vertical
headers (non-latching) and
right-angle headers
(latching and non-latching)
■ IDC (Insulation
Displacement Crimp) mass
termination of solid or
stranded round conductor
.050 [1.27] centerline
ribbon cable with PVC or
polyethylene insulation
■ Accommodates ribbon cable
conductor sizes of 28 AWG
[0.08-0.09 mm2] and 30
AWG [0.05 mm2] and
insulation diameters up to
.036 [0.91] maximum
■ Reliable single beam
receptacle contact design
■ Duplex plated receptacle
contacts; gold plated in
mating area, tin in
termination area
■ Terminating covers (sold
separately) provide both
strain relief and protection
to the termination area
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Connectors available with or
without metal latch
■ Connectors without latches
are polarized to help
prevent mismating
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by Canadian
Standards
Association
File No. LR7189
The latching version of
the cable connector is
equipped with a metal latch
which provides positive
retention of the receptacle
cable connector when
mated with a surface-
25
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050
[1.27 x 1.27] Centerline
A
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Latch — Stainless steel
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] minimum
gold in mating area, .000150 [0.00381]
minimum tin on solder tail, with entire
contact underplated .000050 [0.00127]
minimum nickel
.280
[7.11]
.627
[15.94]
.690
[17.56]
Related Product Data
Mating Headers — pages 21 and 24
(latching)
Terminating Covers (Must be
Purchased Separately, 2 Required
per Connector) — page 27
Termination Tooling — page 28
Performance Specifications —
page 29
D
.120
[3.05]
.050
[1.27]
Typ
B Spaces at
.050 [1.27] = C
Technical Documents — page 29
Receptacle Connectors, Double Row,
With and Without Latch
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging — Tube
.284 .327
[7.21] [8.31]
.050
[1.27]
No. of
Pos.
A
B
10
20
30
40
50
60
70
80
100
.578 [14.68]
.828 [21.03]
1.078 [27.38]
1.328 [33.73]
1.578 [40.08]
1.828 [46.43]
2.078 [52.78]
2.328 [59.13]
2.828 [71.83]
4
9
14
19
24
29
34
39
49
Dimensions
C
.200 [5.08]
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.450 [62.23]
D
.266 [6.76]
.516 [13.11]
.766 [19.46]
1.016 [25.81]
1.266 [32.16]
1.516 [38.51]
1.766 [44.86]
2.016 [51.21]
2.516 [63.91]
Receptacle
Part Numbers
With Latch
Without Latch
5-104892-1
5-104893-1
5-104892-2
5-104893-2
5-104892-3
5-104893-3
5-104892-4
5-104893-4
5-104892-5
5-104893-5
5-104892-6
5-104893-6
5-104892-7
5-104893-7
5-104892-8
5-104893-8
6-104892-0
6-104893-0
Note: All part numbers are RoHS compliant.
26
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Terminating Covers for Cable Connectors
Material
Glass-filled thermoplastic,
black, 94V-0 rated
A
.191
[4.85]
Related Product Data
Connectors used with Covers —
page 26
Termination Tooling — page 28
Technical Documents — page 29
.277
[7.04]
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging — Plastic bag
Cable Conncetor Terminating Cover,
Double Row
No. of
Dimension
Terminator Cover
Pos.
A
Part Numbers
10
.565 [14.35]
104891-1
20
.815 [20.70]
104891-2
30
1.065 [27.05]
104891-3
40
1.315 [33.82]
104891-4
50
1.565 [39.75]
104891-5
60
1.815 [46.10]
104891-6
70
2.065 [52.45]
104891-7
80
2.315 [58.80]
104891-8
100
2.815 [71.50]
1-104891-0
Note: Terminating covers must be purchased separately, two are required for
each cable connector.
Note: All part numbers are RoHS compliant.
27
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling for Cable Connectors
The Manual Miniature
Application Frame
Assembly 91295-1,
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termination of ribbon cable to the
cable connectors shown on
page 26.
Prior to termination, the
covers must be partially
assembled onto a connector housing, the cable
inserted between the covers and contacts and the
covers preclosed by hand,
clamping the cable in
place.
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete the
mass termination and provide strain relief for the
completed connection.
Manual Miniature Application Frame Assembly 91295-1
with Cover Closing Kit 543518-1
For tooling information, call
Technical Support Center
1-800-522-6752.
IDC (Insulation Displacement Crimp) Tooling
Note: Refer to TE Instruction
Sheets 408-9817 (Frame Assembly
91295-1) and 408-9909 (Cover
Closing Kit 543518-1) for complete
termination/tooling information.
Note: All part numbers are RoHS compliant.
28
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Performance Specifications
Board-to-Board Connectors, Vertical and Right-Angle
Mating Force — 6.4 oz (1.78 N] max. per contact
Unmating Force — 1.0 oz [0.28 N] min. per contact
Durability — Tested to 200 cycles min.
Current Rating — (30°C T rise): .5 ampere per contact
Operating Temperature Range — -65°C to +105°C
Termination Resistance — 16 milliohms max. (initial)
Insulation Resistance — 5000 megohms min. (initial)
Dielectric Withstanding Voltage — 300 VAC
Cable-to-Board Connectors
Mating Force — 6.4 oz (1.78 N] max. per contact
Unmating Force Without Latch — .5 oz [0.14 N] min. per contact
Durability — Tested to 200 cycles min.
Current Rating — (10°C T rise); .5 ampere per contact
Operating Temperature Range — -65°C to +105°C
Termination Resistance — 25 milliohms max. (initial and final)
Insulation Resistance — 5000 megohms min. (initial)
Dielectric Withstanding Voltage — 300 VAC
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-1332
AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
108-1443
AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable
Connectors
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-7010
AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
Manual Miniature Application Frame Assembly 91295-1
408-9909
Cover Closing Kit 543518-1
Performance Specifications/
Technical Documents
408-9817
Note: All part numbers are RoHS compliant.
29
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System
Micro-MaTch Miniature Connector System
Features/ Benefits
■
Available in 2 to
20 positions
■
Applicable Wire:
20~28 AWG
■
Wire connectors supplied
on-tape and suitable for
mass termination of
28 AWG [0.08 mm2 to
0.09 mm2] ribbon cable
■
Tin plated contact design
■
Guaranteed minimum
contact force of 2.0 N
■
Fretting corrosion proof
thanks to additional
positioning spring
member
■
Full range of application
tooling from hand tool to
fully automated equipment
1
2
3
1. Contact Pin
2. Contact Spring
3. Positioning
Miniaturization and the
trend towards higher density of electronic functions
on a substrate led to the
introduction of smaller
interconnection systems.
The Micro-MaTch connector
family, with it’s contact
spacing of 1.27 mm, fully
complies with the electronic
packaging requirements of
today and the future. The
system offers a range of
board and wire connectors,
enabling a variety of wire-toboard and board-to-board
interconnections.
The Micro-MaTch contact
concept shown on this page
is essentially different from
other systems available.
By its design the traditional
failure mode in tin plated
connections, fretting corrosion, is prevented. Due to
an additional positioning
spring in the female part,
relative movements caused
by vibrations/thermal
expansion between male
and female contacts are
absorbed. By preventing
movements on the contact
spot, a gas tight connection
can be guaranteed under
all circumstances.
The contact spring is
located in the board connector and not in the cable
connector, which is usually
the case. The counter part,
incorporated in the cable
connector, is a simple pin,
either with an insulation displacement section, suitable
for the mass-termination of
cable or with a kinked solder leg to be soldered onto
a PC Board. The separation
of these two basic functions
of the contact system —
contact force generation
and wire termination —
enables the independent
optimization of both functions and also leads to
relatively simple contact
shapes.
Because of their shapes
contacts can be postplated, leaving no bare
edges in the contact and
wire slot area. The contact
spring system features an
additional spring member —
the positioning spring —
which compensates positional tolerances. In this way
the contact spring can be
fully optimized for its basic
function, so that the relatively high contact force,
required for tin plated
contact systems, can be
guaranteed under all
circumstances.
The Micro-MaTch contact
spring system is absolutely
fretting corrosion proof by
its design.
30
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Overview Technical Data
Technical Data
1.27 mm (staggered)
4, 6, 8, 10, 12, 14, 16, 18, 20, and some 24 positions
Phosphor bronze
Tin over Nickel
Thermoplastic polyester, red, glass-filled
For surface mount versions polyamide 4.6
Flammability rating:
per UL 94 V-0
UL-recognized:
File E28476 Vol. 23 Section 4
Contact Resistance:
10 MΩ max.
Insulation Resistance:
1.000 MΩ min.
Nominal Voltage:
230 V
Current Rating:
1.5 A max.
Temperature Range:
-40° C to +105° C (operating)
Mating Force:
5N max. per contact
Unmating Force:
1N min. per contact
Minimum Contact Force:
2N min.
Product Specification:
108-19052
Application Specification:
114-19016, 114-19051
RoHS Compliance Code:
Always RoHS compliant (directive 2002/95/EC) for all types
Lead-free Process Capable: Wave solder capable to 265° C for through hole versions
reflow solder capable to 260° C for SMD versions
Micro-MaTch Miniature Connector System
Overview Technical Data
Centerline:
Number of Positions:
Contact Material:
Contact Finish:
Housing Material:
PC Board Connectors
PC Board Thickness:
PC Board Hole Diameter:
1.6 mm nominal
0.8 mm for solder connectors
Ribbon Connectors
Cable Type:
Conductor Spacing:
Conductor Diameter:
Insulation Type:
Insulation Diameter:
Ribbon cable, UL Style 2651
1.27 mm (.050")
Solid 0.30 mm diameter Stranded 0.08 mm2
7 x 0.12 - 0.13 mm (other diameters and/or configurations
on request)
semi-rigid PVC
0.9 ± 0.1 mm
Discrete Wire (COSI) Connectors
Cable Type :
AWG 28-24 and 24-20
31
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (3 Dimensions)
Micro-MaTch Miniature Connector System
Applications (3 Dimensions)
Male Connectors
Female Connectors
Male-on-Wire
Part Number 215083
Male-on-Board
Part Number 215464
COSI
Part Number 338095
Part Number 338096
Part Number 338097
1
2
3
4
5/6
7
8
9
10
Paddle Board
Part Number 215570
Female Top Entry
Part Number 215079
Female Side Entry
Part Number 215460
SMD Top Entry
Part Number 188275
Image
1
2
3
4
5
6
7
8
9
10
Description (see also page 33)
Wire-to-Board through hole
Board-to-Board through hole
Wire-to-Board (discrete wire), through hole
Wire-to-Board right angle, through hole
Board-to-Board right angle, through hole
Board-to-Board right angle, through hole
Wire-to-Board right angle (discrete wire), through hole
Wire-to-Board surface mount
Board-to-Board surface mount, through hole
Wire-to-Board (discrete wire), surface mount
32
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (2 Dimensions)
Male Connectors
Male-on-Board
Part Number 215464
Male-on-Wire
Part Number 215083
Female Connectors
2
3
A
C
A
A
B
B
B
Female Top Entry
Part Number 215079
C
C
C
6
4
A
7
5
A C
B
C
B
G
E
D
Female Side Entry
Part Number 215460
E
A
B
AB
C
F
C
Paddle Board
Part Number 215570
Micro-MaTch Miniature Connector System
Applications (2 Dimensions)
1
COSI
Part Number 338095
Part Number 338096
Part Number 338097
D
C
C
D
8
9
A
A
10
A
C
B
B
B
SMD Top Entry
Part Number 188275
Image
1
2
3
4
5
6
7
8
9
10
A (max)
5.2
5.2
5.2
8.4
5.2
5.2
5.2
5.2
5.2
5.2
D
D
B (max)
7.5
6.2
9.7
5.9
5.9
5.9
5.9
8.5
7.1
10.7
C
2.54
2.54
2.54
2.54
2.54
2.54
2.54
—
2.54
—
D
Dimensions (mm)
D (max)
—
—
—
1.5
1.5
1.5
1.5
7.1
7.1
7.1
E (max)
—
—
—
—
7.0
—
10.6
—
—
—
F(max)
—
—
—
—
1.6
—
—
—
—
—
G (max)
—
—
—
—
—
2.8
—
—
—
—
33
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Top Entry
1.5
[.059]
5.1
Max.
[.200]
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Top Entry
This connector version
incorporates the patented
Micro-MaTch contact spring
system and is designed to
be soldered onto PC
Boards with a nominal thickness of 1.6 mm.
The solder legs are
indented, providing firm
retention of the connector
before and during the
soldering operations.
4.0
[.157]
1.9
[.074]
3.1
[.122]
1.27
[.050]
A
B Max.
As polarization is accomplished directly between the
Micro-MaTch male connectors and the PC Board, this
top entry female connector
does not have any polarizing features. Therefore, the
orientation of the connector
on the PC Board is irrelevant.
1.40
[.055]
2.54
[.100]
1.27
[.050]
0.80
[.031]
1.80
[.071]
1.50 Hole for
[.059] Polarization Pin
2.54
[.100]
Typical Hole Pattern
Not Solder Side Shown
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 connectors on
a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
No. of Positions
4
6
8
10
12
14
16
18
20
Dimensions (mm)
A
B
3.81
7.1
6.35
9.7
8.89
12.2
11.43
14.7
13.97
17.3
16.51
19.8
19.05
22.4
21.59
24.9
24.13
27.4
Part Numbers
2500 Connectors/Reel
250 Connectors/Box
215079-4
7-215079-4
215079-6
7-215079-6
215079-8
7-215079-8
1-215079-0
8-215079-0
1-215079-2
8-215079-2
1-215079-4
8-215079-4
1-215079-6
8-215079-6
1-215079-8
8-215079-8
2-215079-0
9-215079-0
34
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Side Entry
B
Max.
3.1
[0.12]
5.8
[0.23]
This connector version is
identical to the top entry
version with two exceptions:
The solder legs are
parallel to the mating
face of the connector
instead of perpendicular.
■
It's housing is polarized,
so that polarization is
accomplished directly
between the two mating
connectors. Proper
orientation of the
connectors on the PC
Board is relevant here.
3.85
[0.15]
2.54
[0.09]
5.3 Max.
[0.21]
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Side Entry
■
0.90
[.039]
1.27
[.050]
2.54
[.100]
A
2.54
[0.09]
1.27
[0.05]
2.54
[0.09]
0.80
Nom.
[0.03]
(N-1)x1.27
Recommended PCB Hole Layout
Not Solder Side Shown
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 connectors on
a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
No. of Positions
4
6
8
10
12
14
16
18
20
Dimensions (mm)
A
B
3.81
7.1
6.35
9.7
8.89
12.2
11.43
14.7
13.97
17.3
16.51
19.8
19.05
22.4
21.59
24.9
24.13
27.4
Part Numbers
2500 Connectors/Reel
250 Connectors/Box
(1500) 215460-4 (1500)
7-215460-4
215460-6
7-215460-6
215460-8
7-215460-8
1-215460-0
8-215460-0
1-215460-2
8-215460-2
1-215460-4
8-215460-4
1-215460-6
8-215460-6
1-215460-8
8-215460-8
2-215460-0
9-215460-0
35
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector Surface Mount Device (SMD)
Tape for Vacuum P&P
Micro-MaTch Miniature Connector System —
Female-on-Board Connector Surface Mount Device (SMD)
1.90
[.075]
1.27
[.050]
This SMD connector version
is designed for standard
reflow and infrared solder
processes (“FULL SMD”).
Polarization is accomplished by the housing,
therefor no polarization
holes in the PC Board are
required.
A=(N-1)*1.27
0.5B-2.5
5.0
[.197]
5.0
[.197]
The contact is designed with
an additional spring to compensate for differences in
thermal expansion between
housing and PCB. Due to
this feature, tension on
solder joints is prevented.
7.0
[.276]
B
A
2.54
[.100]
5.0
[.197]
1.50
[.059]
3.00 Minimum
[.118] Solder Path Length
1.50
[.059]
Recommended
PCB Layout
Top View
Notes:
1. To enable automatic Pick & Placement, connectors are always packed in embossed
tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum Pick & Placement.
4. For this connector no additional solder hold down is required.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
No. of Positions
4
6
8
10
12
14
16
18
20
Dimensions (mm)
A
B
3.81
7.1
6.35
9.7
8.89
12.2
11.43
14.7
13.97
17.3
16.51
19.8
19.05
22.4
21.59
24.9
24.13
27.4
Part Numbers
2500 Connectors/Reel
250 Connectors/Box
188275-4
7-188275-4
188275-6
7-188275-6
188275-8
7-188275-8
1-188275-0
8-188275-0
1-188275-2
8-188275-2
1-188275-4
8-188275-4
1-188275-6
8-188275-6
1-188275-8
8-188275-8
2-188275-0
9-188275-0
36
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector
PageHead_12_HelvCdBd
(Continued) System —
Male-on-Board Connector
A
5.00
[.197]
A
This male connector version
is designed to be soldered
onto PC Boards with a nominal thickness of 1.6 mm.
A
2.54
[.100]
The solder legs are
indented for firm retention of
the connector in the
PC Board.
B
1.27
[.050]
6.75
[.266]
The connector housing
features a polarizing pin
on one end for proper
orientation of this connector
version.
7.10
[.280]
Micro-MaTch Miniature Connector System —
Male-on-Board Connector
Section A-A
0.80
[.031]
2.54
[.100]
1.27
[.050]
2.54
[.100]
Typical Hole Pattern
Not Solder Side Shown
Notes:
1. To enable automatic Pick & Placement, connectors are always packed in
embossed tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum Pick & Placement.
4. For this connector no additional solder hold down is required.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
No. of Positions
4
6
8
10
12
14
16
18
20
Dimensions (mm)
A
B
3.81
8.2
6.35
10.7
8.89
13.3
11.43
15.8
13.97
18.3
16.51
20.8
19.05
23.4
21.59
25.9
24.13
28.4
Part Numbers
2500 Connectors/Reel
250 Connectors/Box
215464-4
7-215464-4
215464-6
7-215464-6
215464-8
7-215464-8
1-215464-0
8-215464-0
1-215464-2
8-215464-2
1-215464-4
8-215464-4
1-215464-6
8-215464-6
1-215464-8
8-215464-8
2-215464-0
9-215464-0
37
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Male-on-Wire Connector
A
A
For the wire connection, a
well-known type blade with
a single slot is used. The
insides of the slots are tin
plated for stable and
reliable connections.
A Max.
B Max.
5.10
Max.
[.201]
Micro-MaTch Miniature Connector System —
Male-on-Wire Connector
6.8
The connector is supplied
with a pre-assembled cover,
providing excellent positioning of the ribbon cable
before and during
the insulation displacement
process.
C
10.20
[.402]
After termination the cover
is held in place by each
individual contact in addition to two plastic latches at
both ends of the connector.
Section A-A
Remark:
The Micro-MaTch Male-on-Wire connector is specifically designed to be disengaged from
its counterpart by pulling the cable in the appropriate direction.
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 diameter of 250 mm,
packed in a dedicated dispenser box.
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-215079-X
X-338068-X
X-338069-X
X-338070-X
X-100411-X
X-188431-X
No. of Positions
4
6
8
10
12
14
16
18
20
24
Dimensions (mm)
A
B
C
8.6
5.4
3.81
11.1
8.0
6.35
3.6
10.5
8.89
16.2
13.0
11.43
18.7
15.6
13.97
21.3
18.1
16.51
23.8
20.7
19.05
26.3
23.2
21.59
28.9
25.7
24.13
34.0
30.8
29.21
Part Numbers
2500 Connectors/Reel
250 Connectors/Box
215083-4
7-215083-4
215083-6
7-215083-6
215083-8
7-215083-8
1-215083-0
8-215083-0
1-215083-2
8-215083-2
1-215083-4
8-215083-4
1-215083-6
8-215083-6
1-215083-8
8-215083-8
2-215083-0
9-215083-0
2-215083-4
9-215083-4
38
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Paddle Board Connector
A
5.00
[.197]
A
Direct soldering of a ribbon
cable onto a PC Board is
a very difficult job with the
smaller sizes of ribbon
cable. If such a permanent
cable connection is
required, the application
can be facilitated by using
this connector type.
A
2.54
[.100]
B
1.27
[.050]
6.75
[.266]
The Paddle Board connector is applied to the ribbon
cable with the same application tooling, available
for the termination of the
Male-on-Wire connector.
7.10
[.280]
Section A-A
The solder legs are
indented and provide
mechanical retention of the
connector/cable assembly
in the PC Board before and
during soldering.
This Paddle Board connector version is designed to
be soldered onto PC
Boards with a nominal thickness of 1.6 mm.
2.54
[.100]
Micro-MaTch Miniature Connector System —
Paddle Board Connector
0.80
[.031]
1.27
[.050]
2.54
[.100]
Typical Hole Pattern
Not Solder Side Shown
Notes:
1. To enable automatic Pick & Placement, connectors are always packed
in embossed tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum
Pick & Placement.
4. For this connector no additional solder hold down is required.
No mate — direct soldering
of ribbon cable onto the
PC Board
No. of Positions
4
6
8
10
12
14
16
18
20
24
Dimensions (mm)
A
B
C
8.6
5.4
3.81
11.1
8.0
6.35
3.6
10.5
8.89
16.2
13.0
11.43
18.7
15.6
13.97
21.3
18.1
16.51
23.8
20.7
19.05
26.3
23.2
21.59
28.9
25.7
24.13
34.0
30.8
29.21
Part Numbers
2500 Connectors/Reel
250 Connectors/Box
215570-4
7-215570-4
215570-6
7-215570-6
215570-8
7-215570-8
1-215570-0
8-215570-0
1-215570-2
8-215570-2
1-215570-4
8-215570-4
1-215570-6
8-215570-6
1-215570-8
8-215570-8
2-215570-0
9-215570-0
2-215570-4
—
39
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Crimp On Snap In (COSI) Connector
C
2.54
[.100]
1.27
[.050]
2.65
[.104]
Basic Part Number 338095
and Contacts Part Numbers
338096 and 338097
B Max.
5.10
Max.
[.201]
This crimp version for discrete Wire-to-Board applications is fully compatible with
all female connectors of the
Micro-MaTch family.
Micro-MaTch Miniature Connector System —
Crimp On Snap In (COSI) Connector
Insulation and wire crimp
barrel are copies of the
well proven AMPLIMITE
contacts. After mating with
a Micro-MaTch female
connector the contacts are
fully protected by isolating
plastics. Contacts are made
of a pre-tinned phosphor
bronze.
A Max.
9.10
Max.
[.358]
0.82
[.032]
12.40
Max.
[.488]
0.70
[.027]
6.00
Ref.
[.236]
Contacts are supplied in a
range for 24-20 AWG and
28-24 AWG. For repair operations an extraction tool is
available; Part Number
734873-1.
0.40
[.016]
0.20
[.008]
0.25 Cut Off
[.010] Max.
8.65
Max.
[.341]
Notes:
1. Contacts can be crimped using a G-terminator or mini stripper crimper based applicator.
2. For the contacts on strip the standard packaging quantity is 15.000 pcs on a reel
with a diameter of 600 mm.
3. For repair/service contacts are packaged 750 pcs. Per reel, to be used with handtools.
4. The housings are bulk packed in a box with a packaging quantity varying from 200 to
900 pcs per box.
Mates with:
X-338095-X
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-215079-X
X-338068-X
X-338069-X
X-338670-X
X-100411-X
X-188431-X
Wire Size Range
(mm2)
(AWG)
0.08-0.20
28-24
0.20-0.50
24-20
No. of Positions
4
6
8
10
12
14
16
18
20
Insulation Diameter
(mm)
0.76-1.00
1.27-1.52
Dimensions (mm)
A
B
C
7.2
8.4
3.81
9.8
10.9
6.35
12.3
13.5
8.89
14.9
16.0
11.43
17.4
18.5
13.97
19.9
21.1
16.51
22.5
23.6
19.05
25.0
26.2
21.59
27.6
28.7
24.13
Part Number
Large reel, 15.000
Small reel, 750
338096-1
1-338096-1
338097-1
1-338097-1
Part Numbers
2500 Connectors/Reel
250 Connectors/Box
338095-4
900
338095-6
700
338095-8
500
1-338095-0
450
1-338095-2
400
1-338095-4
350
1-338095-6
300
1-338095-8
250
2-338095-0
200
40
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System — Specials
SMC Connector Part Number 100411
This connector type enables a solderless application to the
printed circuit board. Contact is made on the surface of the
PCB, enabling the use of paperphenol and epoxy boards
with both drilled and punched holes. This connector is suitable for both Wire-to-Board as Board-to-Board connections.
Because this connector is mounted on the solder side, the
components of both PCB’s in a parallel Board-to-Board
application, will be in the same direction. By this, the stacking of two or more PCB’s is possible. Application tooling
available on request.
Mates with:
X-215464-X
X-338095-X
X-215083-X
Locking Latch Part Numbers 338068/338069/338070
For Wire-to-Board applications this feature provides an
audible click during mating. This feature is available for the
standard Micro-MaTch female connectors. Cross reference
is made by base part number x-338068-x instead of
x-215079-x, x-338069-x instead of x-188275-x and
x-338070-x instead of x-215460-x (standard large reel
packaging only).
Mates with:
X-338095-X
X-215464-X
X-338728-X
X-215083-X
Micro-MaTch Miniature Connector System —
Specials
In-board SMD Part Number 188431
This connector is only tooled in 20 position (9-188431-0)
and packaged in embossed tape according to EIA481
standards. The connectors are equipped with a feature for
vacuum Pick & Placement. It enables the mounting of a
PCB with the solder side direct behind e.g. a display. It is
also possible to obtain a parallel BTB application with an
extreme low PCB distance of 4.2 mm.
Mates with:
X-338095-X
X-215464-X
X-338728-X
X-215083-X
Male SMD Part Number 338728
This connector enables the possibility to have a full SMD
to SMD Board-to-Board application. It mates with all
Micro-MaTch female connectors, and will be packaged
according EIA 481 standard. Consult TE for more information.
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-338069-X
X-338070-X
X-188431-X
X-338068-X
41
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System
Application Tooling
Micro-MaTch Miniature Connector System Application Tooling
Pistol Handgrip Tooling. This is a
handtool for terminating Micro-MaTch
Male-on-Wire and Paddle Board connectors. Meant for small quantities or
repair services. Pistol handgrip and
adapter must be ordered separately.
Standard Pistol Handgrip Part
Number 734155-1. This basic tool can
be used for Micro-MaTch and other
applications.
Pistol Handgrip Adapter Set Part
Number 734024-1. This adapter can
be used for Micro-MaTch terminations,
together with the pistol handgrip.
Bench Press Tooling Part Number
733280-3. This complete tool includes
a Micro-MaTch dedicated tool set
mounted on the bench press 654173-2.
Bench Press Part Number 91085-2.
This basic press is a hand operated
version. This press can also be
obtained in a pneumatically operated
version; Part Number 91112-3.
Bench Press Tool Set Part Number
733278-2. This tool set is designed
especially for Micro-MaTch. It fits both
pneumatically and hand operated press.
COSI Hand Tooling Part Number
734870-1 for 24-20 AWG, and Part
Number 734870-2 for 28-24 AWG.
These dedicated tools can be obtained
for services/repair applications.
G-terminator Part Number 677-499-1.
Applicators for G-terminator.
Part Number 677894-1 for AWG 2824 (Part Number 338096-1) and
Part Number 677895-1 for AWG 2420 (Part Number 338097-1).
42
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Application Tooling (Continued)
Semiautomatic Tooling Part Number 677410-1.
This tool can be used for Micro-MaTch lead end and for
daisy chain assembly applications.
Semiautomatic Tooling Part Number 677412-5 for
Micro-MaTch only and Part Number 1-677412-0 for both
Micro-MaTch and other ribbon cables. This machine can be
used for lead end assemblies.
Micro-MaTch Miniature Connector System
Application Tooling
Connector Dispenser Part Number 677463-1.
The dispenser accepts the Micro-MaTch standard reels
(2500 pcs/reel). It automatically removes the pre-set
connector quantity from the reel and drops it in a separate
box. Quantity can easily be programmed by the user.
43
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Lead Assembly
It is possible to deliver
custom made Micro-MaTch
lead assemblies, both cable
end assemblies and daisychain assemblies,
in all positions between
4 and 20 in all required
cable lengths. All leads are
100% electrically tested on
shortcut and connection
before shipment. A flexible
7 stranded cable is used for
easy assembly. Special
cable on request. For order
information contact TE.
Micro-MaTch Miniature Connector System Sample Box
Sample Box
Part Number 1377074-1
Micro-MaTch Miniature Connector System
Lead Assembly and Sample Box
This box includes samples
of all connector types within
the Micro-MaTch family,
examples of leads, printed
circuit boards and a
CD-ROM. The CD-ROM
includes an electronic
version of this catalogue, an
animation of the contact
principle and CAD files of
all connector types.
This sample box is an aid
in visualizing the variety
of applications where
Micro-MaTch can be
implemented.
44
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
PageHead_12_HelvCdBd
Universal
I/O Pin Connectors
(Continued)
without Mounting Ears
Material and Finish
Housing and Cover — Flame retardant
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, .000100
[0.00254] min. tin on termination end,
.000030 [0.00762] min. gold on mating
end, both over .000050 [0.00127] min.
nickel
Without Latches
With Latches
Technical Documents
Product Specification
108-1336
Application Specification
114-7011
Instruction Sheets
408-9720
408-6939
■
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
B
0.754 ±.015
[19.15 ±0.36]
R
Certified by the
Canadian Standards
Association,
File No. LR 7189
A
Pin Length
.240
[6.10]
R
.330
[8.38]
Accessories
Strain Relief — page 67
Ejector Latch — page 63
Military Polarizer — page 63
Terminates 26 and 28 AWG solid or
stranded ribbon cable. See Application
Specification for cable requirements.
Position No.1
Indicator
No. of
Positions
103,4
Related Product Data
Mateable Receptacles Novo —
pages 48-51
Female Socket Connectors —
pages 52-55
16
20
24
26
30
34
40
44
50
60
64
Part Numbers of Connectors with:
No Latches
Short Latches1
Long Latches2
1-111446-4
1-111492-5
1-111504-4
1-111446-5
1-111492-6
1-111504-5
1-111446-6
1-111492-7
1-111504-6
1-111446-8
—
1-111504-7
1-111446-9
1-111492-9
1-111504-8
2-111446-0
2-111492-0
—
2-111446-1
2-111492-1
2-111504-0
2-111446-2
2-111492-2
—
2-111446-3
2-111492-3
—
2-111446-4
2-111492-4
2-111504-3
1-111446-7
2-111492-5
—
2-111446-5
2-111492-6
—
2-111446-6
—
2-111504-6
.050 [1.27] Centerline Ribbon Cable Connectors
Universal I/O Pin Connectors without Mounting Ears
14
3,4
Dimensions
A
B
.992
1.072
25.20
27.23
1.192
1.272
30.28
32.31
1.292
1.372
32.82
34.85
1.492
1.572
37.90
39.93
1.692
1.772
42.98
45.01
1.792
1.872
45.52
47.55
1.992
2.072
50.60
52.63
2.192
2.272
55.68
57.71
2.492
2.572
63.30
65.33
2.692
2.772
68.38
70.41
2.992
3.072
76.00
78.03
3.492
3.572
88.70
90.73
3.692
3.772
93.78
95.81
Pins On Centerlines
.100
[2.54]
Use short latch versions when mating connectors without strain reliefs are used.
Use long latch versions when mating connectors with strain reliefs are used.
No slot on end with position No. 1 indicator for 10 and 14-position connectors.
4 No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors.
1
2
Note: All part numbers are RoHS
compliant.
3
45
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal I/O Pin Connectors with Slotted Mounting Ears
Material and Finish
Housing and Cover — Flame retardant
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, .000100
[0.00254] min. tin on termination end,
.000030 [0.00762] min. gold on mating
end, both over .000050 [0.00127] min.
nickel
Without Latches
With Latches
Technical Documents
Product Specification
108-1336
Application Specification
114-7011
Instruction Sheets
408-9720
408-6939
■
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
B
.754 ± .015
[19.15 ± 0.36]
R
Certified by the
Canadian Standards
Association,
File No. LR 7189
A
Pin Length
.240
[6.10]
R
.330
[8.38]
Accessories
Ejector Latch — page 63
Military Polarizer — page 63
Terminates 26 and 28 AWG solid or
stranded ribbon cable. See Application
Specification for cable requirements.
Position No.1
Indicator
No. of
Positions
103,4
Related Product Data
.050 [1.27] Centerline Ribbon Cable Connectors
Universal I/O Pin Connectors with Slotted Mounting Ears
Mateable Receptacles Novo —
pages 48-51
Female Socket Connectors —
pages 52-55
14
3,4
16
20
24
26
30
34
40
44
50
60
64
Dimensions
A
B
.992
1.476
25.20
37.49
1.192
1.676
30.28
42.57
1.292
1.776
32.82
45.11
1.492
1.976
37.90
50.19
1.692
2.176
42.98
55.27
1.792
2.276
45.52
57.81
1.992
2.476
50.60
62.89
2.192
2.676
55.68
67.97
2.492
2.976
63.30
75.59
2.692
3.176
68.38
80.67
2.992
3.476
76.00
88.29
3.492
3.976
88.70
100.99
3.692
4.176
93.78
106.07
Pins On Centerlines
.100 [2.54]
Part Numbers of Connectors with:
No Latches
Short Latches1
Long Latches2
5111448-1
1-111494-5
1-111506-6
—
—
—
5111448-3
—
1-111506-8
5111448-4
1-111494-8
—
5111448-5
1-111494-9
2-111506-0
—
—
2-111506-1
5111448-7
2-111494-0
—
5111448-8
2-111494-1
—
5111448-9
2-111494-2
2-111506-4
—
2-111494-3
2-111506-5
—
2-111494-4
1-111506-4
—
2-111494-5
—
1-5111448-3
2-111494-6
—
Use short latch versions when mating connectors without strain reliefs are used.
Use long latch versions when mating connectors with strain reliefs are used.
No slot on end with position No. 1 indicator for 10 and 14-position connectors.
4 No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors.
1
2
Note: All part numbers are RoHS
compliant.
3
46
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
EUROLATCH Receptacles, 64-Position
(Three-Row Housings, Two Rows Loaded)
Housing Assembly with
Cover (Preassembled)
78.74
[3.100]
3.48
[.137]
Row A
10.49 8.46
[.413] [.333]
8.46
[.333]
Row B
84.89
[3.342]
Row C
89.92
[3.54]
94.74
[3.730]
Housing
Assembly
Cover
Material and Finish
Housing and Cover — UL 94V-0
rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated 0.00076 [.000030] gold on
post/pin mating end, 0.00254-0.00508
[.000100-.000200] tin on termination
end, with entire contact underplated
0.00127 [.000050] nickel.
6.35
[.250]
10.95
[.431]
Related Product Data
14.43
[.568]
18.57
[.731]
Mateable Pin Connectors —
Eurocard Type C and Type R—
Selection Guide 82650,
See Catalog 82721
Ribbon Cable —
Part Number 2-57040-2 or
Part Number 2-57034-5 (64 conductor)
Application Tooling — pages 70-74
Terminated
84.66
[3.333]
Technical Documents
Product Specifications
108-46003 EUROLATCH Receptacles
DIN 41612
IEC 603-2
Instruction Sheet
408-9156
■
Certified by the
Canadian Standards
Association,
File No. LR 7189
1.27
[.050]
2.79 Dia.
[.110] Dia.
(2 Holes)
R
R
Contact
Rows
Loaded
A and C
Receptacle
Kit No.
(Preassembled)
746603-4
Note: All part numbers are RoHS compliant.
47
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
.050 [1.27] Centerline Ribbon Cable Connectors
EUROLATCH Receptacles 64-Position
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
2.54
[.100]
Ribbon Cable Interconnect Solutions
Novo Connectors
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Product Facts
■
.100 x .100 [2.54 x 2.54]
mating grid for .050 [1.27]
pitch ribbon cable
■
Tuning fork contact offers a
military approved design, at
an economical cost
■
Polarization options include
military, center and military,
and dual bar
■
Choice of duplex gold plating
on contact mating area
■
Insulation displacement
contacts for fast, economical
mass terminations
■
Contact design provides
uniform latching of contacts
and housing with connector
cover
■
Housing, cover and strain
relief made of UL 94V-0
rated thermoplastic material
■
Selected 10 thru 64-position
configurations available
■
Accepts wire size range
28-26 AWG [0.08-0.15 mm2],
solid or stranded
■
Snap-on strain relief and
choice of pull loops
available
■
One-step termination with
Novo tooling
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■
Certified by the
Canadian Standards
Association,
File No. LR 7189
Novo receptacles offer a
dual contact interface with
all normal force created by
metal-to-metal contact. This
provides a higher degree of
contact reliability.
Novo receptacles feature
two rows of contacts on
.100 x .100 [2.54 x 2.54]
centerlines in select sizes
from 10 to 64 positions.
Contacts mate with .0252
[0.642] or round posts with
.245 [6.22] max. and .175
[4.45] min. lengths. The
Novo tuning fork contact
offers a military-approved
design, and at a lower cost.
R
R
Housings are made of
UL 94V-0 thermoplastic
material and feature military,
military and center, and
dual bar polarization.
Optional accessories
include a snap-on strain
relief and pull loops.
Novo receptacles can be
terminated to .050 [1.27]
pitch ribbon cable by a
wide variety of one-step
application tooling.
Assemblies are packaged
in tubes for ease of handling,
protection and termination.
Contacts are made of
phosphor bronze and
are available in a choice
of duplex .000015 [0.00038]
or .000030 [0.00076] gold
in the mating area, and
.000100 [0.00254] tin in the
termination area, with the
entire contact underplated
with .000050 [0.00127]
nickel.
48
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Novo Receptacles, Military Polarized* .100 x .100 [2.54 x 2.54] Centers
.460
[11.68]
C
.100
[2.54]
.135
[3.43]
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Housing Assembly with
Cover (Preassembled) and
Strain Relief (Optional)
.240
[6.10]
.100
[2.54]
•
.329
[8.36]
Contacts mate with .025 [0.64] sq.
or round pins with .245 [6.22] max.
and .175 [4.45] min. lengths.
.093
[2.36]
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated (See chart below)
Cover
Housing
Assembly
Position No. 1
Index Slot
.464
.422
[10.72] [11.79]
Ref.
Ref.
.629
[15.98]
Ref.
.570
[14.48]
Ref. .650
[16.51]
Ref.
Terminated
with Cover
B
.106
[2.69]
Terminated
with Cover
and Strain Relief
A
Related Product Data
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
.100
[2.54]
receptacles.
Housing Assembly and Cover
A
Dimensions
B
C
10
.450
11.43
.680
17.27
.400
10.16
14
.650
16.51
.880
22.35
.600
15.24
16
.750
19.05
.980
24.89
.700
17.78
20
.950
24.13
1.180
29.97
.900
22.86
24
1.150
29.21
1.380
35.05
1.100
27.94
26
1.250
31.75
1.480
37.59
1.200
30.48
30
1.450
36.83
1.680
42.67
1.400
35.56
34
1.650
41.91
1.880
47.75
1.600
40.64
40
1.950
49.53
2.180
55.37
1.900
48.26
50
2.450
62.23
2.680
68.07
2.400
60.96
60
2.950
74.93
3.180
80.77
2.900
73.66
64
3.150
80.01
3.380
85.85
3.100
78.74
No. of
Pos.
Accessories
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief Dimensional
Information — page 68
Application Tooling — pages 70-74
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Ribbon Cable Connectors
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers
listed below for the applicable documents.
is no polarization slot on
• There
this end of 10- and 14-position
Contact
Plating
Strain Relief
Part No.
Receptacle
(Preassembled)
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
499252-5
499252-5
499252-9
499252-9
499252-8
499252-8
499252-2
499252-2
1-499252-0
1-499252-0
499252-3
499252-3
1-499252-2
1-499252-2
499252-6
499252-6
499252-1
499252-1
499252-4
499252-4
499252-7
499252-7
1-499252-3
1-499252-3
1658620-1
1658623-1
1658620-2
1658623-2
1658620-3
1658623-3
1658620-4
1658623-4
1658620-5
1658623-5
1658620-6
1658623-6
1658620-7
1658623-7
1658620-8
1658623-8
1658620-9
1658623-9
1-1658620-0
1-1658623-0
—
—
1-1658620-2
—
.000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
.000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased separately using the component part nos. listed above.
All part numbers are RoHS compliant.
1
2
*These receptacles can be used in
applications requiring non-polarization, as well as military polarization.
49
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Novo Receptacles, Center and Military Polarized*
.100 x .100 [2.54 x 2.54] Centers
.140
[3.56]
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Housing Assembly with
Cover (Preassembled) and
Strain Relief (Optional)
C
.460
[11.68]
.100
[2.54]
.135
[3.43]
.240
[6.10]
D
.130
[3.30]
Polarization
Bar
D
•
.100
[2.54]
Housing
Assembly
Position No. 1
Index Slot
.329
[8.36]
Contacts mate with .025 [0.64] sq.
or round pins with .245 [6.22] max.
and .175 [4.45] min. lengths.
.093
[2.36]
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated (See chart below)
Cover
.422
.464
[10.72] [11.79]
Ref.
Ref.
.629
[15.98]
Ref.
.570
[14.48]
Ref.
.650
[16.51]
Ref.
Terminated
with Cover
B
.100
[2.54]
Related Product Data
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
Terminated
with Cover
and Strain Relief
A
.106
[2.69]
is no polarization slot on
• There
this end of 10- and 14-position
receptacles.
Housing Assembly and Cover
No. of
Pos.
Accessories
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief — page 68
Application Tooling — pages 70-74
Dimensions
B
C
D
10
.450
11.43
.680
17.27
.400
10.16
.275
6.99
14
.650
16.51
.880
22.35
.600
15.24
.375
9.53
16
.750
19.05
.980
24.89
.700
17.78
.425
10.80
20
.950
24.13
1.180
29.97
.900
22.86
.525
13.34
24
1.150
29.21
1.380
35.05
1.100
27.94
.625
15.88
26
1.250
31.75
1.480
37.59
1.200
30.48
.675
17.15
30
1.450
36.83
1.680
42.67
1.400
35.56
.775
19.69
34
1.650
41.91
1.880
47.75
1.600
40.64
.875
22.23
40
1.950
49.53
2.180
55.37
1.900
48.26
1.025
26.04
50
2.450
62.23
2.680
68.07
2.400
60.96
1.275
32.39
60
2.950
74.93
3.180
80.77
2.900
73.66
1.525
38.74
64
3.150
80.01
3.380
85.85
3.100
78.74
1.625
41.28
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Novo Receptacles
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers
listed below for the applicable documents.
A
Contact
Plating
Strain Relief
Part No.
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
499252-5
499252-5
499252-9
499252-9
499252-8
499252-8
499252-2
499252-2
1-499252-0
1-499252-0
499252-3
499252-3
1-499252-2
1-499252-2
499252-6
499252-6
499252-1
499252-1
499252-4
499252-4
499252-7
499252-7
1-499252-3
1-499252-3
Receptacle
(Preassembled)
1658621-1
1658622-1
1658621-2
1658622-2
1658621-3
1658622-3
1658621-4
1658622-4
1658621-5
1658622-5
1658621-6
1658622-6
1658621-7
1658622-7
1658621-8
1658622-8
1658621-9
1658622-9
1-1658621-0
1-1658622-0
1-1658621-1
1-1658622-1
1-1658621-2
1-1658622-2
.000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
2.000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased separately using the component part nos. listed above.
All part numbers are RoHS compliant.
1
*These receptacles can be used
in applications requiring center
polarization.
50
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Novo Receptacles, Dual Polarized, .100 x .100 [2.54 x 2.54] Centers
.140
[3.56]
C
.460
[11.68]
.100
[2.54]
.135
[3.43]
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Housing Assembly with
Recessed Cover
(Preassembled) and Strain
Relief (Optional)
.240
[6.10]
.100
[2.54]
.140
[3.56]
.190
[4.83]
Housing
Assembly
Material and Finish
Cover
Position No. 1
Index Slot
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated .000030 [0.00076] gold or gold
flash over palladium-nickel .000030
[0.00076] min. total on post/pin mating
end, .000100-.000200 [0.002540.00508] tin on termination end, with
entire contact underplated .000050
[0.00127] nickel.
.329
[8.36]
.093
[2.36]
.422
.464
[10.72] [11.79]
Ref.
Ref.
.629
[15.98]
Ref.
.570
[14.48]
Ref.
.650
[16.51]
Ref.
Terminated
with Cover
Related Product Data
B
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
Terminated
with Cover
and Strain Relief
A
.106
[2.69]
.100
[2.54]
Accessories
Housing Assembly and Cover
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief — page 68
Application Tooling — pages 70-74
No. of
Pos.
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Novo Receptacles
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers listed
below for the applicable documents.
10
14
16
20
24
26
30
34
40
50
64
A
.450
11.43
.650
16.51
.750
19.05
.950
24.13
1.150
29.21
1.250
31.75
1.450
36.83
1.650
41.91
1.950
49.53
2.450
62.23
3.150
80.01
Dimensions
B
C
.680
.400
17.27
10.16
.880
.600
22.35
15.24
.980
.700
24.89
17.78
1.180
.900
29.97
22.86
1.380
1.100
35.05
27.94
1.480
1.200
37.59
30.48
1.680
1.400
42.67
35.56
1.880
1.600
47.75
40.64
2.180
1.900
55.37
48.26
2.680
2.400
68.07
60.96
3.380
3.100
85.85
78.74
Strain Relief
Part No.
Receptacle
(Preassembled)
499252-5
1658624-1
499252-9
1658624-2
499252-8
1658624-3
499252-2
1658624-4
1-499252-0
1658624-5
499252-3
1658624-6
1-499252-2
1658624-7
499252-6
1658624-8
499252-1
1658624-9
499252-4
1-1658624-0
1-499252-3
1-1658624-2
Note: All part numbers are RoHS compliant.
51
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
622 and 636 Series
Technical Data
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series
Color — 622 Series, Blue;
636 Series, Black
Contact Material —
622 Series, Beryllium copper;
636 Series, Phosphor bronze
Contact Plating — 622 Series,
.000030 [0.00076] min. gold on mating
end, .000100-.000200 [0.002540.00508] tin on termination end, both
over .000050 [0.00127] nickel underplate; 636 Series, .000015 [0.00038]
min. gold on mating end, .000100.000200 [0.00254-0.00508] tin on
termination end, both over .000050
[0.00127] nickel underplate.
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 26-28 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
Universal and Low Profile Pin
Headers — pages 76-95
Universal I/O Ribbon Cable
Connectors — pages 45 and 46
Polarization — Military and center
polarized only
■
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E60980
Certified by the
Canadian Standards
Association,
File No. LR 92984
R
R
Application Tooling
Die — 1437000-9 [T&B# 779-2151 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-4 [T&B# 779-3151 ref.]
Accessories
Strain Relief — page 69
Pull Loops — page 66
Keying Plug — page 64
52
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
622 and 636 Series (Continued)
622 Series
Part Numbers
A
Dimensions
B
C
TE Connectivity
6
10
12
14
16
20
24
26
30
34
40
50
64
.477
12.12
.677
17.20
.777
19.74
.877
22.28
.977
24.82
1.177
29.90
1.377
34.98
1.477
37.52
1.677
42.60
1.877
47.68
2.177
55.30
2.677
68.00
3.377
85.78
.200
5.08
.400
10.16
.500
12.70
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.96
3.100
78.74
.075
1.91
.126
3.20
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
T&B
(Reference Only)
Connector
w/ Strain Relief
T&B
TE Connectivity (Reference
Only)
1658527-2
622-0630LF
1-1658527-9
622-0641LF
1658527-3
622-1030LF
1658527-4
622-1041LF
2-1658527-0
622-1230LF
—
—
1658527-5
622-1430LF
2-1658527-2
622-1441LF
1658527-6
622-1630LF
1658527-7
622-1641LF
2-1658527-3
622-2030LF
1658527-8
622-2041LF
—
—
2-1658527-5
622-2441LF
622-2630LF
1-1658527-0
622-2641LF
—
—
2-1658527-7
622-3041LF
—
—
2-1658527-8
622-3441LF
1-1658527-2
622-4030LF
1-1658527-3
622-4041LF
1-1658527-4
622-5030LF
1-1658527-5
622-5041LF
—
—
3-1658527-2
622-6441LF
1658527-9
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series
No.of
Pos.
Connector
Only
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
636 Series
Part Numbers
No.of
Pos.
6
10
14
16
20
24
26
34
40
50
64
Note: All part numbers are RoHS
compliant.
A
.477
12.12
.677
17.20
.877
22.28
.977
24.82
1.177
29.90
1.377
34.98
1.477
37.52
1.877
47.68
2.177
55.30
2.677
68.00
3.377
85.78
Connector
Only
Dimensions
B
C
.200
5.08
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.600
40.64
1.900
48.26
2.400
60.96
3.100
78.74
.075
1.91
.126
3.20
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
.150
3.81
Connector
w/ Strain Relief
T&B
TE Connectivity (Reference
Only)
TE Connectivity
T&B
(Reference Only)
1-1658528-0
636-0630LF
1-1658528-1
636-1030LF
1-1658528-2
636-1430LF
1-1658528-4
636-1630LF
1658528-5
636-1641LF
1-1658528-5
636-2030LF
1658528-4
636-2041LF
1-1658528-6
636-2430LF
—
—
1-1658528-7
636-2630LF
—
—
—
—
1658528-6
636-3441LF
—
—
1-1658528-9
636-4041LF
2-1658528-0
636-5030LF
1658528-8
636-5041LF
—
—
2-1658528-3
636-6441LF
—
1658528-2
—
—
636-1041LF
—
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
53
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
METRIC
Dimensions are millimeters over inches
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
609 Series
Technical Data
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000030 [0.00076]
min. gold on mating end, .000100.000200 [0.00254-0.00508] tin on
termination end, both over .000050
[0.00127] nickel underplate.
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
Universal and Low Profile Pin
Headers — pages 76-95
Universal I/O Ribbon Cable
Connectors — pages 45 and 46
Polarization — Military only or
military and center polarized
■
■
Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E60980
Certified by the
Canadian Standards
Association,
File No. LR 92984
Dual Slot IDC Design
Optional Center
Polarization
3.30
[.130]
R
R
Application Tooling
Die — 1437000-9 [T&B# 779-2151 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-4 [T&B# 779-3151 ref.]
Standard Socket Connector
Without Strain Relief
Accessories
Strain Relief — page 67
Pull Loops — page 66
Keying Plug — page 64
Note: All part numbers are RoHS compliant.
54
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
609 Series (Continued)
609 Series, Military Polarized
Part Numbers
No.of
Pos.
10
16
20
26
40
50
.476
12.09
.676
17.17
.976
24.79
1.176
29.87
1.476
37.49
2.176
55.27
2.676
67.97
Dimensions
B
C
.200
5.08
.400
10.16
.700
17.78
.900
22.86
1.200
30.48
1.900
48.26
2.400
60.96
.392
9.96
.592
15.04
.892
22.66
1.092
27.74
1.392
35.36
2.092
53.14
2.592
65.84
Connector
w/ Strain Relief
T&B
TE Connectivity (Reference
Only)
TE Connectivity
T&B
(Reference Only)
2-1658526-5
609-0600MLF
—
—
1658526-3
609-1000MLF
—
—
—
—
1-1658526-0
609-1601MLF
3-1658526-0
609-2000MLF
—
—
3-1658526-5
609-2600MLF
—
—
4-1658526-1
609-4000MLF
—
—
4-1658526-3
609-5000MLF
2-1658526-2
609-5001MLF
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series
6
A
Connector
Only
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
609 Series, Military and Center Polarized
Part Numbers
No.of
Pos.
A
Connector
Only
Dimensions
B
C
TE Connectivity
6
10
14
16
20
24
26
34
36
40
50
64
.476
12.09
.676
17.17
.876
22.25
.976
24.79
1.176
29.87
1.376
34.95
1.476
37.49
1.876
47.65
1.976
50.19
2.176
55.27
2.676
67.97
3.376
85.75
.200
5.08
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.600
40.64
1.700
43.18
1.900
48.26
2.400
60.96
3.100
78.74
.392
9.96
.592
15.04
.792
20.12
.892
22.66
1.092
27.74
1.292
32.82
1.392
35.36
1.792
45.52
1.892
48.06
2.092
53.14
2.592
65.84
3.292
83.62
T&B
(Reference Only)
Connector
w/ Strain Relief
T&B
TE Connectivity (Reference
Only)
1658526-1
609-0630LF
1658526-2
609-0641LF
1658526-4
609-1030LF
1658526-5
609-1041LF
1658526-8
609-1430LF
1658526-9
609-1441LF
2-1658526-9
609-1630LF
1-1658526-1
609-1641LF
1-1658526-2
609-2030LF
1-1658526-3
609-2041LF
1-1658526-4
609-2430LF
—
—
1-1658526-5
609-2630LF
1-1658526-6
609-2641LF
1-1658526-8
609-3430LF
1-1658526-9
609-3441LF
3-1658526-8
609-3630LF
4-1658526-0
609-3641LF
2-1658526-0
609-4030LF
2-1658526-1
609-4041LF
2-1658526-3
609-5030LF
2-1658526-4
609-5041LF
4-1658526-4
609-6430LF
4-1658526-5
609-6441LF
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
Note: All part numbers are RoHS compliant.
55
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series
Technical Data
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Dual slot, barrel
shaped (“tulip”) IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
.100 x .100 DIP sockets
.280
[7.1]
A
.100
[2.54]
.319 Before
[8.1] Crimping
.008 x .024
[0.2 x 0.6]
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref.]
.100
[2.54]
.100
[2.54]
No.of
Pos.
6
10
14
16
20
26
34
Dimensions
A
B
.512
13.00
.713
18.11
.913
23.19
1.010
25.65
1.213
30.81
1.512
38.40
1.913
48.59
.200
5.08
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.200
30.48
1.600
40.64
B
Part Numbers
TE Connectivity
T&B
(Reference Only)
1437006-4
609-0653
1437006-7
609-1053
1-1437006-0
609-1453
1-1437006-3
609-1653
1-1437006-6
609-2053
2-1437006-1
609-2653
2-1437006-4
609-3453
Note: Order by TE Part Number only. All part numbers listed above are found
on TE customer drawing 1437006-4.
Note: All part numbers are RoHS compliant.
56
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series
7.57
(.298)
Technical Data
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Single slot, flat,
tuning fork style IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 26-28 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
.100 x .100 DIP sockets
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
6-1437000-1 [T&B# 779-3133 ref.]
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref.]
No.of
Pos.
6
Accessories
Strain Relief — page 65
8
10
14
16
20
24
26
34
36
40
50
60
64
Dimensions
A
B
.506
12.85
.606
15.39
.706
17.93
.906
23.01
1.006
25.55
1.206
30.63
1.406
35.71
1.506
38.25
1.906
48.41
2.006
50.95
2.206
56.03
2.706
68.73
3.206
81.43
3.406
86.51
.200
5.08
.300
7.62
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.600
40.64
1.700
43.18
1.900
48.26
2.400
60.96
2.900
73.66
3.100
78.74
Part Numbers
TE Connectivity
T&B
(Reference Only)
1658525-4
622-0653LF
1658525-5
622-0853LF
1658525-6
622-1053LF
1658525-7
622-1453LF
1658525-8
622-1653LF
1658525-9
622-2053LF
1-1658525-0
622-2453LF
1658525-1
622-2653LF
1658525-2
622-3453LF
1-1658525-2
622-3653LF
1-1658525-3
622-4053LF
1658525-3
622-5053LF
1-1658525-5
622-6053LF
1-1658525-6
622-6453LF
Notes: Order by TE Part Number only.
All part numbers are RoHS compliant.
57
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers
Housing Assembly with
Cover (Preassembled)
B
C
.050
[1.27]
.278
[7.06]
.100
[2.54]
A
.050
[1.27]
A
.050
[1.27]
Material and Finish
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers
Housing and Cover — Black
thermoplastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000005 [0.000127] min. gold in termination area, .000100 [0.00254] min. tin
on solder tails, both over .000050
[0.00127] nickel on entire contact
Contact Design — Flat, tuning fork
style IDC
.396*
[10.06]
.113
[2.87]
.156
[3.96]
.100
[2.54]
Related Product Data
Application Tooling — pages 70-74
Product Specification
108-1538 DIP Plug
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers listed
below for the applicable documents.
Mateable Connectors —
For Connectors without Retention
Legs — .100 x .100 DIP Sockets
No. of
Pos.
10
14
16
20
24
26
30
C
.100
[2.54]
34
40
44
.100
[2.54]
50
60
PCB Layout
.013
[0.33]
*Height of connector after
termination is .253 [6.43] ref.
.100
[2.54]
Technical Documents
.035 Dia.
[0.89]
(After Plating)
.019
[0.48]
C
64
A
.450
11.43
.650
16.51
.750
19.05
.950
24.13
1.150
29.21
1.250
31.75
1.450
36.83
1.650
41.91
1.950
49.53
2.150
54.61
2.450
62.23
2.950
74.93
3.150
80.01
Dimensions
B
.680
17.27
.880
22.35
.980
24.89
1.180
29.97
1.380
35.05
1.480
37.59
1.680
42.67
1.880
47.75
2.180
55.37
2.380
60.45
2.680
68.07
3.180
80.77
3.380
85.85
C
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.100
53.34
2.400
60.96
2.900
73.66
3.100
78.74
DIP Plugs
(Preassembled)
With Retention
Legs
2-746610-1
1-111382-4
2-746610-2
—
1-746610-4
1-111382-6
1-746610-5
1-111382-7
2-746610-3
—
1-746610-6
1-111382-8
1-746610-7
—
1-746610-8
1-111382-9
1-746610-9
—
2-746610-6
—
2-746610-0
2-111382-0
2-746610-4
—
2-746610-5
—
Notes: All plug kits include a housing assembly and cover (preassembled).
All part numbers are RoHS compliant.
58
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers
Housing Assembly with
Cover (Preassembled)
Material and Finish
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers
Housing and Cover — Black thermoplastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000050 [0.00127] nickel underplate on
entire contact, .000005 [0.000127] min.
gold on termination (IDC) end. See table
for leg finish.
Contact Design — Flat, tuning fork
style IDC
Related Product Data
Application Tooling — pages 70-74
Technical Documents
Product Specification
108-1538 DIP Plug
Ribbon Cable Requirements —
28 AWG stranded or 26, 28 and 30 AWG
solid wire
.300
[7.62]
Recommended Mounting
Hole Pattern
(for .094-.125 [2.39-3.18]
thick pc boards)
Dimensions
B
C
No. of
Pos.
A
8
.350
8.89
.488
12.40
.300
7.62
14
.650
16.51
.788
20.02
.600
15.24
16
.750
19.05
.888
22.56
.700
17.78
18
.850
21.59
.988
25.10
.800
20.32
20
.950
24.13
1.088
27.64
.900
22.86
Contact
Plating
DIP Plugs
(Preassembled)
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
746611-7
—
5746613-1
746611-8
5746612-2
5746613-2
746611-6
5746612-3
5746613-3
746611-9
—
—
1-746611-0
—
—
.000030 [0.00076] gold on leg
.000015 [0.00038] gold on leg
3 .000100 [0.00254] tin on leg
Note: All part numbers are RoHS compliant.
1
2
59
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers
Housing Assembly with
Cover (Preassembled)
Material and Finish
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers
Housing and Cover — Black thermoplastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000050 [0.00127] nickel underplate on
entire contact, .000005 [0.000127] min.
gold on termination (IDC) end. See table
for leg finish.
Contact Design — Flat, tuning fork
style IDC
Related Product Data
Application Tooling — pages 70-74
Technical Documents
Product Specification
108-1538 DIP Plug
Ribbon Cable Requirements —
28 AWG stranded or 26, 28 and 30 AWG
solid wire
No. of
Pos.
24
28
40
1
A
1.150
29.21
1.350
34.29
1.950
49.53
Dimensions
B
C
1.288
1.100
32.72
27.94
1.488
1.300
37.80
33.02
2.088
1.900
53.04
48.26
Contact
Plating
DIP Plugs
(Preassembled)
Duplex1
5746615-1
Duplex1
5746615-2
Duplex1
5746615-3
.000015 [0.00038] gold on leg
Recommended Mounting
Hole Pattern
(for .094-.125 [2.39-3.18]
thick pc boards)
Note: All part numbers are RoHS compliant.
60
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
4-Row PCB Solder Transition Connectors
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Dual slot, barrel
shaped (“tulip”) IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
.050 [1.27] Centerline Ribbon Cable Connectors
4-Row PCB Solder Transition Connectors
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref]
Handtool —
1437000-6 [T&B# 779-2100 ref]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref]
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref]
609 Series, Military Polarized
No.of
Pos.
10
14
16
20
26
34
44
50
Dimensions
A
B
.710
18.03
.910
23.11
1.010
25.65
1.210
30.73
1.510
38.35
1.910
48.51
2.410
61.21
2.710
68.83
.450
11.43
.650
16.51
.750
19.05
.950
24.13
1.250
31.75
1.650
41.91
2.150
54.61
2.450
62.23
Part Numbers
.100 Tail Length
.156 Tail Length
TE Connectivity
T&B
TE Connectivity
T&B
(Reference Only)
(Reference Only)
6437006-5
609-1003LF
—
6437006-8
609-1403LF
1-6437006-1
609-1603LF
—
—
—
—
1-6437006-5
609-2043LF
1-6437006-8
609-2603LF
2-6437006-0
609-2643LF
2-6437006-2
609-3403LF
2-6437006-3
609-3443LF
2-6437006-9
609-4403LF
—
—
—
—
3-6437006-2
609-5043LF
6437006-9
—
609-1443LF
Notes: Order by TE Part Number only.
All part numbers listed above are found on TE Customer Drawing 6437006-5.
Note: All part numbers are RoHS compliant.
61
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
1-Row Horizontal Receptacles
A
B
1.25
Pitch
[.049]
1.35
[.053]
1.40
[.055]
2.80 3.00
[.110] [.118]
Optional
Mounting Boss
3.40
[.134] 4.20
[.165]
Material and Finish
Housing — Black PPS, UL 94V-0 rated
Contacts — Phosphor bronze,
post tin plated over nickel underplate
0.70 Min.
[.028]
3.40
[.134]
.050 [1.27] Centerline Ribbon Cable Connectors
1-Row Horizontal Receptacles
0.05
[.002]
0.50
[.020]
C
0.80
[.031]
1.30
[.051]
0.70
Min.
[.028]
Ø 0.80
[.031] 1.35
[.053]
0.50
[.020]
A
PCB Mounting Layout
1.25 Fine Pitch (FP) - 1-Row Horizontal Receptacles
No. of
Pos.
4
5
6
2.35
Slot Key
7
8
10
17
20
A
Dimensions
B
C
6.45
.254
7.70
.303
8.95
.352
10.20
.402
11.45
.451
13.95
.549
22.70
.894
26.45
1.041
3.75
.148
5.00
.197
6.25
.246
7.50
.295
8.75
.345
11.25
.443
20.00
.787
23.75
.935
5.45
.215
6.70
.264
7.95
.313
9.20
.362
10.45
.411
12.95
.510
21.70
.854
25.45
1.002
Part Numbers
With Mounting Bosses
Tape
Bag
Without Mounting Bosses
Tape
Bag
3-175637-4
3-174638-4
3-175629-4
3-174903-4
3-175637-5
3-174638-5
3-175629-5
3-174903-5
3-175637-6
3-174638-6
3-175629-6
3-174903-6
3-175637-7
3-174638-7
3-175629-7
3-174903-7
3-175637-8
3-174638-8
3-175629-8
3-174903-8
4-175637-0
4-174638-0
4-175629-0
4-174903-0
—
4-174638-7
4-175629-7
4-174903-7
—
5-174638-0
—
5-174903-0
Note: All part numbers are RoHS compliant.
62
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Flexible Pull Tabs
Approximate Installed Height of
Part Number 120623-1 Above Connector
Material and Finish
Dimensions
C
H
.680
1.806
17.27
45.87
1.749
.880
44.42
22.35
1.721
.980
43.71
24.89
1.180
1.664
29.97
42.27
1.380
1.607
35.05
40.82
1.578
1.480
40.08
37.59
1.680
1.521
42.67
38.63
1.880
1.464
47.75
37.19
1.436
1.980
36.47
50.29
1.379
2.180
35.03
55.37
2.380
1.322
60.45
33.58
2.680
1.236
68.07
31.39
3.180
1.094
80.77
27.79
3.380
1.037
85.85
26.34
No. of
Positions
Nylon, black
10
Part Number 120623-1
14
Related Product Data
16
Novo Connectors — pages 48-51
Ultra ATA Bus Connectors —
pages 13-15
20
24
26
30
34
36
40
H
44
50
60
64
C
Note: Cannot be used together with a strain relief.
Accessories
Universal I/O Latches
Material and Finish
.236
[5.99]
Polyester, black
.108±.002
[2.74±0.05]
Mates to
Receptacles
Related Product Data
Without Strain Relief
Universal I/O Pin Connectors —
pages 45 and 46
Latch Removal Tool
Part Number 91269-1
F
With Strain Relief
Dimensions
F
G
.416
.768
10.57
19.51
.576
.928
14.63
23.57
Part
Number
111451-1
111451-3
G
Military Polarizers
.335
[8.51]
.134
[3.40]
Material and Finish
Thermoplastic, black
Break Line
Related Product Data
Throw-Away
Tab
Universal I/O Pin Connectors —
pages 45 and 46
Break Line
.335
[8.51]
.134
[3.40]
Part Numbers:
499991-2 (packaged, 50 per bag)
499991-3 (packaged, 1000 per box)
The snap-in polarizer
provides military polarization.
Note: All part numbers are RoHS compliant.
63
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Keying Plugs
Material and Finish
Thermoplastic, see table for color
Keying Plug
Plug (Installed
in Contact)
Typical Application
Key Plug 111620-1
Accessories
There are ten key plugs on a comb
.500
[12.70]
.245
[6.22]
.029
[0.58]
.185
[4.70]
Polarizing Key
1-1437023-2
Receptacle
Connector Series
2 mm
Rcpt. Connectors
Catalog
Pages
609 Series Female
Socket Connectors
54, 55
622 Series Female
Socket Connectors
52, 53
636 Series Female
Socket Connectors
52, 53
16, 17
Keying Plug
Part Number
Style
Color
111620-1
Comb
Black
Single
Blue
Single
Blue
Single
Blue
1-1437023-2
T&B 609-0000 (Ref.)
1-1437023-2
T&B 609-0000 (Ref.)
1-1437023-2
T&B 609-0000 (Ref.)
Order by TE Part Number only.
Note: All part numbers are RoHS compliant.
64
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Keying Plugs (Continued)
Material and Finish
Thermoplastic, see table for color
Receptacle
Connector Series
Part Number 499712-1
Catalog
Pages
Novo
Connectors
48-51
Ultra ATA Bus
Connectors
13-15
Keying Plug
Part Number
499712-1
104072-1
499712-1
104072-1
Style
Single
Comb
Single
Comb
Color
Black
Black
Order by TE Part Number only.
Key Plug
(Plugs into Contact)
Alternate Configuration
Keying Plug Part No. 104072-1
(10 Keying Plugs per Comb)
Accessories
Note: All part numbers are RoHS compliant.
65
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Pull Loops, Permanent
(for Receptacles and
Pin Connectors)
Material and Finish
Natural color PVC, 94-VTM-1 rating
(thin material)
Related Product Data
Use with:
Female Socket Connectors — pages
52-55
Ultra ATA Bus Connectors —
pages 13-15
2 mm Receptacle Connectors —
pages 16 and 17
Novo Connectors — pages 48-51
Accessories
Note: This pull loop is installed manually between the cover and strain relief,
and cannot be used without strain relief.
Female Socket
Conns.
No. of Positions
Ultra ATA
2 mm
Bus Conns.
Rcpt. Conns.
Novo
Conns.
10
—
12, 14, 16
10
14
—
20
14
16
—
22
16
20
—
24, 26
20
24
—
—
24
26
—
30, 34, 40
26
30
—
—
30
34
—
44
34
40
40
50
40
50
—
—
50
60
—
—
60
Dimension
A
.44
11.18
.64
16.26
.74
18.80
.88
22.35
1.08
27.43
1.18
29.97
1.38
35.05
1.58
40.13
1.82
46.23
2.32
58.93
2.80
71.12
Pull Loop
Part No.
5088450-2
5088450-3
5088450-4
5088450-5
5088450-6
5088450-7
1-5088450-2
5088450-8
5088450-9
1-5088450-0
1-5088450-1
Note: All part numbers are RoHS compliant.
66
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Strain Relief for Universal
I/O Pin Connectors Without
Mounting Ears
Glass-filled polyester, black
No. of
Pos.
10
A
.330
[8.38]
Typ.
Material and Finish
.313±.004
[7.95±0.10]
Typ.
C
14
.098±.002
[2.49±0.05]
2 Plc.
16
20
Related Product Data
B
Universal I/O Pin Connectors —
page 45
24
26
30
34
40
44
50
60
64
A
.520
13.21
.720
18.29
.820
20.83
1.020
25.91
1.220
30.99
1.320
33.53
1.520
38.61
1.720
43.69
2.020
51.31
2.220
56.39
2.520
64.01
3.020
76.71
3.220
81.79
Dimensions
B
C
.766
.940
19.46
23.88
.966
1.140
24.54
28.96
1.066
1.240
27.08
31.50
1.266
1.440
32.16
36.58
1.466
1.640
37.24
41.66
1.566
1.740
39.78
44.20
1.766
1.940
44.86
49.28
1.966
2.140
49.94
54.36
2.266
2.440
57.56
61.98
2.466
2.640
62.64
67.06
2.766
2.940
70.26
74.68
3.266
3.440
82.96
87.38
3.466
3.640
88.04
92.56
Part
Number
111547-1
111547-2
111547-3
111547-4
111547-5
111547-6
111547-7
111547-8
111547-9
1-111547-0
1-111547-1
1-111547-2
1-111547-3
Accessories
Strain Relief for 609 Series
(Tulip Contact) Female
Socket Connectors
Material and Finish
Glass-filled polyester, blue
Related Product Data
Female Socket Connectors —
page 54 and 55
.240
[6.10]
A
.565
[14.35]
Standard Version
.240
[6.10]
Part Number
No. of
Pos.
Dimension
A
Type
6
.472
11.99
Standard
2-1437020-1
609-0631
10
.672
17.07
14
.872
22.15
16
.972
24.69
20
1.172
29.77
Heavy Duty
Standard
Heavy Duty
Standard
Heavy Duty
Standard
Heavy Duty
Standard
3-1437020-7
3-1437020-5
5-1437020-1
4-1437020-9
6-1437020-6
6-1437020-4
8-1437020-6
8-1437020-4
609-1031HD
609-1031
609-1431HD
609-1431
609-1631HD
609-1631
609-2031HD
609-2031
24
1.372
34.85
Standard
9-1437020-4
609-2431
26
1.472
37.39
34
1.872
47.55
40
2.172
55.17
50
2.672
67.87
Heavy Duty
Standard
Heavy Duty
Standard
Heavy Duty
Standard
Heavy Duty
Standard
1-1437021-2
1-1437021-0
3-1437021-2
3-1437021-0
5-1437021-5
5-1437021-3
8-1437021-1
7-1437021-9
609-2631HD
609-2631
609-3431HD
609-3431
609-4031HD
609-4031
609-5031HD
609-5031
64
3.372
85.65
Heavy Duty
1-1437022-3
609-6431HD
A
TE Connectivity
T&B
(Ref. Only)
Note: Heavy duty part numbers are listed on TE customer drawing
3-1437020-7. Standard part numbers are listed on TE customer
drawing 2-1437020-1.
All part numbers are RoHS compliant.
.570
[14.46]
Heavy Duty Version
67
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Strain Relief for Novo and
Ultra ATA Bus Connectors
A
No. of
Pos.
10
Material and Finish
14
Glass-filled polyester, black
.240
[6.10]
B
Related Product Data
Novo Connectors — pages 48-51
Ultra ATA Bus Connectors —
pages 13-15
.186
[4.72]
.106
[2.69]
Ref.
16
20
24
.581
[14.76]
Ref.
26
30
34
40
44
50
60
64
Dimensions
A
B
.534
.690
13.56
17.53
.890
.734
22.61
18.64
.990
.834
25.15
21.18
1.034
1.190
26.26
30.23
1.390
1.234
31.34
35.31
1.490
1.334
37.85
33.88
1.534
1.690
38.96
42.93
1.734
1.890
44.04
48.01
2.190
2.034
55.63
51.66
2.390
2.234
60.71
56.74
2.534
2.690
64.36
68.33
3.034
3.190
77.06
81.03
3.390
3.234
86.11
82.14
Part
Number
499252-5
499252-9
499252-8
499252-2
1-499252-0
499252-3
1-499252-2
499252-6
499252-1*
1-499252-1
499252-4
499252-7
1-499252-3
Accessories
*Ultra ATA Strain Relief is 499252-1 only.
Strain Relief for 2 mm
Receptacle Connectors
No. of
Pos.
8
Material and Finish
.015 Rad. Typ.
[0.38]
Glass-filled polyester, black
B
Typ.
Related Product Data
A
2 mm Receptacle Connectors —
pages 16 and 17
.130
[3.30]
10
12
.132
[3.35]
Typ.
.201
Typ.
[5.11]
14
16
.276
[7.01]
Typ.
.056
Typ.
[1.42]
20
.030
Typ.
[0.76]
.020
Typ.
[0.51]
.082
Typ.
[2.08]
.161
Typ.
[4.09]
22
.139
Typ.
[3.53]
24
.040
Typ.
[1.02]
26
30
34
40
44
50
Dimensions
A
B
.440
.314
11.18
7.98
.518
.392
13.16
9.96
.596
.470
15.14
11.94
.676
.550
17.17
13.97
.755
.629
19.18
15.98
.912
.786
23.16
19.96
.991
.865
25.17
21.97
1.070
.944
27.18
23.98
1.148
1.022
29.16
25.96
1.306
1.180
33.17
29.97
1.463
1.337
37.16
33.96
1.700
1.574
43.18
39.98
1.857
1.731
47.17
43.97
2.093
1.967
53.16
49.96
Part
Number
1-111614-6
111614-1
1-111614-7
111614-2
111614-3
111614-4
1-111614-5
111614-5
111614-6
111614-7
111614-8
111614-9
1-111614-0
1-111614-1
Note: All part numbers are RoHS compliant.
68
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Strain Relief for 622 and
636 Series Female Socket
Connectors
A
Material and Finish
Glass-filled PBT, see table for color
.236
[6.00]
Related Product Data
Female Socket Connectors —
pages 52 and 53
.555
[14.10]
Part Number
No. of
Pos.
Dimension
C
Color
6
.477
12.12
10
.677
17.20
14
.877
22.28
16
.977
24.82
20
1.177
29.90
24
1.377
34.98
26
1.477
37.52
30
1.677
42.60
34
1.877
47.68
40
2.177
55.30
50
2.677
68.00
Blue
Black
Blue
Black
Blue
Black
Blue
Black
Blue
Black
Blue
Black
Blue
Black
Blue
Black
Blue
Black
Blue
Black
Blue
Black
60
3.177
80.70
Black
9-1437028-5
636-6031
3.377
85.78
Blue
Black
4-1437025-0
1437029-2
622-6431
636-6431
2-1437023-9
1-1437026-9
4-1437023-7
3-1437026-9
7-1437023-1
6-1437026-6
8-1437023-9
8-1437026-5
1437024-5
1437027-7
1-1437024-6
5-1437011-3
2-1437024-8
3-1437027-4
4-1437024-0
6-1437011-6
5-1437024-3
8-1437027-0
8-1437024-3
3-1437028-4
1-1437025-2
6-1437028-8
T&B
(Ref. Only)
622-0631
636-0631
622-1031
636-1031
622-1431
636-1431
622-1631
636-1631
622-2031
636-2031
622-2431
636-2431
622-2631
636-2631
622-3031
636-3031
622-3431
636-3431
622-4031
636-4031
622-5031
636-5031
Accessories
64
TE Connectivity
Note: These part numbers are listed on TE customer drawing 1-1437026-9.
Note: All part numbers are RoHS compliant.
69
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Ribbon Cable Assembly Machines (R-CAM)
Application Tooling
Product Facts
■
Terminates 28 AWG
[0.08 mm2] .050 [1.27]
centerline and 30 AWG
[0.05 mm2] .025 [0.64]
centerline cable to a variety
of connectors
■
Automatic in-process
electrical testing — tests all
circuits for opens, shorts
and high-voltage breakdown
(up to 1,000 volts for
receptacles, 800 volts for
card edge connectors and
300 volts for .025 [0.64]
centerline connectors);
rejects cable assemblies
failing any of these tests
■
Operated by a user-friendly,
interactive touchscreen —
or a keyboard on the
R-CAM 4
■
Self-diagnostics shut
down the machine when a
malfunction occurs, pinpoint
the malfunction, and
identify it on the screen
■
Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
ISO900e1d
i
rtif
Ce
The R-CAM 4, pictured
above, is the newest fully
automatic Ribbon Cable
Assembly Machine for
producing and testing
daisy-chained ribbon cable
assemblies. Enhancements
of this model include the
capability to process premanufactured slit-and-twist
cable and the ability to
produce assemblies with up
to 10 connectors.
The R-CAM 2A, 3A, and
4 terminate 28 AWG
[0.08 mm ], .050 [1.27]
centerline cable to a variety
of connectors. The R-CAM 4
will also terminate 30 AWG
[0.05 mm ] .025 [0.64] centerline cable.
2
2
All of the R-CAM models
automatically perform an
in-process electrical test of
all circuits for opens and
shorts. In addition, all models automatically test the
assembly for high-voltage
breakdown up to 1,000
volts, depending on the
machine and connector
style. The purpose of this
test is to detect gaps that
may have been created during assembly that could
eventually short out when
in use. If an assembly fails
any of these tests, the
machine will shear the
cable off at that point and
automatically discard it into
an alternate bin.
50 or 60 Hz. Model 4 operates at 120 or 220 VAC, 5060 Hz, single phase, 15A.
These machines are programmed and operated
with an interactive touchscreen that allows operators
to access manual, set-up,
run, and edit modes
through easy-to-follow
menu-driven prompts.
Need more information?
For more information,
specifically about tooling,
call TE at the numbers listed
below.
The R-CAM 2A and 3A
require a minimum air supply of 80 psi [5.52 bar] at
8 scfm [0.0038m /s]. The
R-CAM 4 requires 80 psi
[5.52 bar] at 12 scfm
[0.0057 m /s].
3
3
Self-diagnostics shut
down the machine if a
malfunction — such as
misloaded connectors or
incorrectly fed cable —
is detected, pinpoint the
malfunction, and identify it
on the touchscreen.
Models 2A and 3A are available in 120 or 220 VAC, 8 A,
70
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Comparison of R-CAM 2A, R-CAM 3A and R-CAM 4
Machine Model
R-CAM 2A
R-CAM 3A
R-CAM 4
Part Number*
760700-❑
761900-❑
318800-❑
Cable Size
Cable Assembly
Configurations
(Refer to page 73)
28 AWG [0.08 mm2],
.050 [1.27] centerline
28 AWG [0.08 mm2],
.050 [1.27] centerline
28 AWG [0.08 mm2],
.050 [1.27] centerline and
30 AWG [0.05 mm2],
.025 [0.64] centerline
Maximum cable length of 48 [1 220]
Maximum cable length of 105 [2 665]
Maximum cable length of 100 [2 540]
Produces one- to four-connector assemblies with unterminated tail lengths up to
12 [305]
Produces one- or two-connector assemblies with unterminated tail lengths up to
24 [610]
Produces one- to 10-connector assemblies with unterminated tail lengths up to
24 [610]
Trailing connectors can be oriented up or
down
Trailing connectors can be oriented up or
down
Trailing connectors can be oriented up or
down
Production Rates
(Refer to page 72)
Size
Programmable
Testing
Changeover
—
Automatically processes and tests
assemblies produced with premanufactured slit-and-twist cable
Depending on cable lengths, can apply
and test up to 1 670 connectors per hour
Depending on cable lengths, can apply
and test up to 2 000 connectors per hour
Depending on cable lengths, can apply
and test up to 1 050 connectors per hour
108 [2 745] W x 54 [1 370] D x
60 [1 525] H; 750 lb [340 kg]
48 [1 220] W x 48 [1 220] D x
62 [1 575] H; 630 lb [286 kg]
68 [1 730] W x 58 [1 475] D x
72 [1 830] H; 1 300 lb [590 kg]
Operated and programmed by a
touchscreen
Operated and programmed by a
touchscreen
Operated and programmed by a
touchscreen or a keyboard
Parameters for up to 130 cable assemblies can be retained in memory
Parameters for up to 150 cable assemblies can be retained in memory
Parameters for up to 1 000 cable assemblies can be retained in memory
Another menu displays production totals
or a log of the machine events
Another menu displays production totals
or a log of the machine events
Automatically stops after each or three
consecutive assemblies are rejected, as
programmed by the operator
Automatically stops when either a consecutive number of assemblies or a
percentage of the batch run are rejected,
as programmed by the operator
Automatically stops each time a
malfunction is detected
Requires an average of 25 minutes,
depending on assembly size
Requires an average of 15 minutes,
depending on assembly size
Requires an average of 20 minutes to
1 hour, depending on assembly size
and type
Application Tooling
—
—
*Note: Machine may require accessories. Before ordering, contact TE at the numbers listed below.
71
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Typical Production Rates (Assemblies/Hour)
Machine
Model
Connectors
Per Assembly
4 [100]
Length
24 [160]
8 [205]
1
665
620
—
570
500
405
2
R-CAM 2A
475
460
375
3
4
—
420
360
R-CAM 3A
2
1 075
950
780
—
275
265
4
—
205
200
5
R-CAM 4
6
—
170
165
10
—
—
—
Note: Actual production rates may vary depending on the cable assembly configuration.
Available Tooling
48 [1 220]
100 [2 540]
—
300
280
255
660
255
190
160
115
—
—
—
—
500
—
—
—
105
Note: Call TE at the numbers listed below for part numbers or availability.
Tooling for
Connectors
R-CAM 2A
—
—
Ultra Novo Receptacles
AMPLIMITE .050 Series Connectors
Plugs
AMPLIMITE HDF-20 D-Sub.
15, 25, 37
Receptacles
.100 x .100 DIP Plugs
One End Only, 20–64
Number of Positions
R-CAM 3A
—
—
9, 15, 25, 37
One End Only, 10–64
Card Edge Connectors*
20–64
10–64
Novo Receptacles*
2 mm Receptacles
Universal I/O Pin Connectors
20–64
—
One End Only, 20–64
10–64
12–50
—
R-CAM 4 40
68
68 and 80 (Lead and Trail Modules)
68 and 80 (Lead Module Only)
Available in future
20–50
(10–64 Available in future)
10-64
—
Trail Module Only
* Supplied with the R-CAM 2A and R-CAM 3A only.
Reel fed version.
Order Connector Specific Tooling Packages / Feed Shear Tooling separately.
Application Tooling
Products Applied
AMPLIMITE HDF-20 D-Sub. Plugs
AMPLIMITE HDF-20 D-Sub. Receptacles
.100 x .100 DIP Plugs
Card Edge Connectors
Novo Receptacles
2 mm Receptacles
Universal I/O Pin Connectors
Pre-manufactured Slit-and-Twist Cable
(R-CAM 4 only)
Note: For more product information, call TE at the numbers listed below.
72
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable Assembly Configurations
R-CAM 2A
2.70 to 8
[70 to 205]
end-to-end
2.70 to 48
[70 to 1 220]
end-to-end
0 to 8
[0 to 205]
1.50 Min.
[35 Min.]
center-to-center
R-CAM 3A
1.74 to 105
[45 to 2 665]
end-to-end
0 to 24
[0 to 610]
Application Tooling
0 to 24
[0 to 610]
1.74 to 105
[45 to 2 665]
end-to-end
1.74 to 105
[45 to 2 665]
end-to-end
R-CAM 4
1.60 to 100
[40 to 2 540]
center-to-end
1.60 to 100
[40 to 2 540]
center-to-center
0 to 24
[0 to 610]
1.60 Min.
[40 Min.]
center-to-center
1.25 Min.
[30 Min.]
center-to-center
3 Min.
[75 Min.]
center-to-center
73
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling
Manual Arbor Frame
Assembly,
Part No. 91085-2
Hand Tool Kit—Part No. 768340-1
Terminating kit for .050 [1.27] centerline ribbon cable with
28 or 26 AWG [0.08 or 0.15 mm ] stranded or solid, or
30 AWG [0.05 mm ] solid conductors. Includes commercial
grade hand tool with ratchet control for complete termination
cycle, base assembly, bench-mount, tooling sets for standard and Novo receptacles, card edge connectors and DSub HDF low-profile connectors, and a carrying case.
2
Bench frame for applying a
variety of IDC connectors,
including AMPMODU MT
and CHAMP. Features
adjustable ram and handle,
and a slide base. Tooling is
mounted to the ram and into
the tracks of the base plate.
2
Application Tooling
Tooling Instruction Sheets
408-7777—Manual Arbor Frame
Assembly
408-6732—Pneumatic Auto-Cycle
Assembly
408-9828—Hand Tool Kit 768340-1
for Connector-Specific Kits
Pneumatic Auto-Cycle
Unit, Part No. 91112-3
Pneumatic Foot Pedal Unit
Part No. 91112-2
Basically an air-powered
version of Manual Arbor
Frame Assembly 91085-2.
Features adjustable ram
and cycle time, and automatic cycling when the
lower assembly is slid into
the frame to the rear of the
base plate. Includes a
guard around the frame
opening.
Foot pedal indicates cycle—
features adjustable ram and
cycle time.
74
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Low Profile Headers
Product Facts
■
Available in selected
positions 10 thru 60
■
Flame retardant,
thermoplastic housings,
94V-0 rated
■
Vertical and right-angle
versions available in double
row configurations
■
Available in .025 [0.64]
square drawn wire posts
■
Wash out clearance for flux
removal
■
Mates with Ribbon Cable
Connectors
■
Available with and without
eject latches
■
Available with and without
“kinked” soldertails for PCB
retention
■
Headers are recognized
under the Component
Program of Underwriters
Laboratories Inc.
File No. E28476
Performance
Characteristics
Electrical
R
■
■
Headers are certified by
Canadian Standards
Association,
File No. LR 7189
R
Product Specifications
108-40018
Insulation Resistance —
5,000 megohms minimum initial
Dielectric Withstanding Voltage —
1,000 V rms at sea level
Current — 1 ampere maximum
per contact
Operating Voltage — 250 VAC
Low Profile Headers
Low profile IDC headers are
recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E60980, Vol. 5
Technical Documents
Environmental
Operating Temperature —
-65°C to +105°C
R
75
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines
+.000
Low Profile Headers
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
A -.010
[+0.00
-0.25]
.045
[1.14]
B
Pin 1
.130
[3.30]
.165
[4.19]
.015
.010
0.38
0.25
[ ]
.360
[9.14]
.025 ± .001
[0.64 ± 0.03]
Typ.
Material and Finish
Housing — Glass-filled nylon,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating A — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Plating B — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Pin 2
.025 ± .001
[0.64 ± 0.03]
.041
[1.04]
.388
[9.86]
.120 ± .015
[3.05 ± 0.38]
.240
[6.10]
.185 ± .010
[4.70 ± 0.25]
.100
[2.54]
.185
[4.70] Typ.
.100
Typ.
[2.54]
.100
[2.54]
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
AMPMODU Board Mount
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series —
pages 48-55
.100
[2.54]
.035 ± .003
[0.89 ± 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
No. of
Pos.
10
14
16
20
24
26
34
40
50
60
Dimensions
A
B
.800 [20.32]
.400 [10.16]
1.000 [25.40]
.600 [15.24]
1.100 [27.94]
.700 [17.78]
1.300 [33.02]
.900 [22.86]
1.500 [38.10]
1.100 [27.94]
1.600 [40.64]
1.200 [30.48]
2.000 [50.80]
1.600 [40.64]
2.300 [58.42]
1.900 [48.26]
2.800 [71.12]
2.400 [60.96]
3.300 [83.82]
2.900 [73.66]
Post Plating/Part Nos.
Plating A
Plating B
5103309-1
5103308-1
5103309-2
5103308-2
5103309-3
5103308-3
5103309-5
5103308-5
—
1-5103308-3
5103309-6
5103308-6
5103309-7
5103308-7
5103309-8
5103308-8
1-5103309-0
1-5103308-0
—
1-5103308-2
Note: All part numbers are RoHS compliant.
76
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines (Continued)
Low Profile Headers
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
Position No.1
Indicator
•
.388
[9.86]
.165
[4.19]
.025 ± .001
[0.64 ± 0.03] Typ.
Material and Finish
+.000
Housing — Glass-filled nylon,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating A — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Plating B — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
-.010
A +0.00
[-0.25]
Pin 1
B
.240
[6.09]
.100
.130
Typ. [2.54]
[3.31]
.360
[9.14]
.025 ± .001
[.635 ± 0.03]
Typ.
+.020
.135-.010
+0.51
3.42-0.25
[
.185 ± .010
[4.69 ± 0.25]
Typ.
.185
Typ.
[4.69]
.015
.010
0.38
0.25
[
Pin 2
]
.123
[3.12]
]
.100
[2.54]
.100
Typ.
[2.54]
.100
[2.54]
.035 ± .003
[0.89 ± 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
No. of
Pos.
10
14
16
20
26
34
40
50
60
Dimensions
A
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
B
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
Post Plating/Part Nos.
Plating A
Plating B
5103311-1
5103310-1
5103311-2
5103310-2
5103311-3
5103310-3
5103311-5
5103310-5
5103311-6
5103310-6
5103311-7
5103310-7
5103311-8
5103310-8
1-5103311-0
1-5103310-0
1-5103311-2
—
Note: All part numbers are RoHS compliant.
77
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Low Profile Headers
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for
PCB Retention
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End) with Board
Retention Feature
+.005
-.010
A +0.13
[-0.25]
.045
[1.14]
B
Pin 1
.130
[3.30]
.025
.020
0.64
0.51
.165
[4.19]
[ ]
.360
[9.14]
Material and Finish
Housing — Glass-filled PPA,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.100
[2.54]
.025±.001
[0.64±0.03]
Typ.
Pin 2
.025 ± .001
[0.64 ± 0.03]
.041
[1.04]
.120 ± .015
[3.05 ± 0.38]
.388
[9.86]
.240
[6.10]
.100
[2.54]
.185
[4.69]
2 Plcs.
.185
2 Plcs.
[4.69]
Related Product Data
.100
Typ.
[2.54]
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
AMPMODU Board Mount
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
.100
[2.54]
.040 ± .003
[1.02 ± 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
No. of
Pos.
10
14
16
20
24
26
34
40
50
60
Dimensions
A
B
.800 [20.32]
.400 [10.16]
1.000 [25.40]
.600 [15.24]
1.100 [27.94]
.700 [17.78]
1.300 [33.02]
.900 [22.86]
1.500 [38.10]
1.100 [27.94]
1.600 [40.64]
1.200 [30.48]
2.000 [50.80]
1.600 [40.64]
2.300 [58.42]
1.900 [48.26]
2.800 [71.12]
2.400 [60.96]
3.300 [83.82]
2.900 [73.66]
Post Plating
Part Nos.
5104338-1
5104338-2
5104338-3
5104338-4
5104338-5
5104338-6
5104338-7
5104338-8
5104338-9
1-5104338-0
Note: All part numbers are RoHS compliant.
78
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for
PCB Retention (Continued)
Low Profile Headers
Position No.1
Indicator
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End) with Board
Retention Feature
•
.388
[9.86]
.165
[4.19]
.025±.001
[0.64±0.03] Typ.
+.005
-.010
A +0.13
Pin 1
[-0.25]
.045
2 Plcs.
[1.14]
.130
Typ.
[3.30]
.100
[2.54]
B
Material and Finish
Housing — Glass-filled PPA,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.360
[9.14]
.240
[6.09]
.025±.001
[.635±0.03]
Typ.
+.020
.125
-.010
+0.51
3.18
-0.25
[
.185
[4.69]
2 Plcs.
.025
.020
0.64
0.51
]
[ ]
.185 2 Plcs.
[4.69]
Pin 2
.123
[3.12]
.100
[2.54]
.100
[2.54] Typ.
Related Product Data
.100
[2.54]
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
.040±.003
[1.02±0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
No. of
Pos.
10
14
16
20
24
34
40
50
Dimensions
A
B
.800 [20.32]
.400 [10.16]
1.000 [25.40]
.600 [15.24]
1.100 [27.94]
.700 [17.78]
1.300 [33.02]
.900 [22.86]
1.500 [38.10]
1.100 [27.94]
2.000 [50.80]
1.600 [40.64]
2.300 [58.42]
1.900 [48.26]
2.800 [71.12]
2.400 [60.96]
Post Plating
Part Nos.
5104340-1
5104340-2
5104340-3
5104340-4
5104340-5
5104340-7
5104340-8
5104340-9
Note: All part numbers are RoHS compliant.
79
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines
IDC Low Profile Headers
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
B
Pin 2
.362
[9.19]
.254 ± .006
[6.45 ± 0.15]
.100
[2.54]
Pin 1
Position #1 Indicator
Material and Finish
Housing — Glass-filled PBT,
UL 94V-0 rated, black
Posts — Brass or phosphor bronze,
plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.025 ± .001
[0.64 ± 0.03]
.025 ± .001
[0.64 ± 0.03]
.888 ± .012
[22.56 ± 0.30]
For Long
Eject Latch
.728 ± .012
[18.49 ± 0.30]
For Short
Eject Latch
Latching
Height
.575
Long
[14.61]
.427
Short
[10.85]
Latch
Housing
.404 ± .006
[10.26 ± 0.15]
.237 ± .007
[6.02 ± 0.18]
Post
A
Ø .031
Max.
[0.79]
.102 ± .015
[2.59 ± 0.38]
.100
[2.54]
Related Product Data
Ø .035 ± .003
[0.89 ± 0.08]
Electrical Characteristics —
page 75
.100
[2.54]
Recommended PC Board Layout
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
No. of
Pos.
10
14
16
20
24
26
30
34
40
50
60
Dimensions
A
B
.800
20.32
1.000
25.40
1.100
27.94
1.300
33.02
1.500
38.10
1.600
40.64
1.800
45.72
2.000
50.80
2.300
58.42
2.800
71.12
3.300
83.82
Part Numbers
Pin Header with Short Latches
Pin Header with Long Latches
(Mates with Receptacles
(Mates with Receptacles
without Strain Relief)
with Strain Relief)
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.96
2.900
73.66
1761608-3
1761606-3
1761608-5
1761606-5
1761608-6
1761606-6
1761608-7
1761606-7
1761608-8
1761606-8
1761608-9
1761606-9
—
1-1761606-0
1-1761608-1
1-1761606-1
1-1761608-3
1-1761606-3
1-1761608-5
1-1761606-5
1-1761608-6
1-1761606-6
Note: All part numbers are RoHS compliant.
80
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
B
Pin 2
.362
[9.19]
.254 ± .006
[6.45 ± 0.15]
.100
[2.54]
Pin 1
Latching
Height
.575 Long
[14.61]
.427
Short
[10.85]
.025 ± .001
[0.64 ± 0.03]
Position #1 Indicator
Material and Finish
Housing — Glass-filled PBT,
UL 94V-0 rated, black
Posts — Brass or phosphor bronze,
plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
IDC Low Profile Headers
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
.025 ± .001
[0.64 ± 0.03]
.888 ± .012
[22.56 ± 0.30]
For Long
Eject Latch
Latch
U
.728 ± .012
[18.49 ± 0.30]
.404 ± .006
For Short
[10.26 ± 0.15]
Eject Latch
Housing
Post
U
A
.237 ± .007
[6.02 ± 0.18]
.100
[2.54]
.102 ± .010
[2.59 ± 0.25]
Section U-U
.030
[0.76]
Ø .031
Max.
[0.79]
.100
[2.54]
Related Product Data
Electrical Characteristics —
page 75
Ø .035 ± .003
[0.89 ± 0.08]
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
.100
[2.54]
Recommended PC Board Layout
No. of
Pos.
10
14
16
20
26
34
40
50
60
Dimensions
A
B
.800
20.32
1.000
25.40
1.100
27.94
1.300
33.02
1.600
40.64
2.000
50.80
2.300
58.42
2.800
71.12
3.300
83.82
Part Numbers
Pin Header with Short Latches
Pin Header with Long Latches
(Mates with Receptacles
(Mates with Receptacles
without Strain Relief)
with Strain Relief)
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.200
30.48
1.600
40.64
1.900
48.26
2.400
60.96
2.900
73.66
1761609-3
1761607-3
1761609-5
1761607-5
1761609-6
1761607-6
1761609-7
1761607-7
1761609-9
1761607-9
1-1761609-1
1-1761607-1
1-1761609-3
1-1761607-3
1-1761609-5
1-1761607-5
1-1761609-6
1-1761607-6
Note: All part numbers are RoHS compliant.
81
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers, Center Polarized,
.100 x .100 [2.54 x 2.54] Centerlines
.013
[0.33]
IDC Low Profile Headers
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
B
Pin 2
.010
.252 +– .004
.005
.350 +– .010
+ 0.25
+ 0.13
[6.40 – 0.10 ]
[8.89 – 0.25 ]
.100
[2.54]
Pin 1
A
Material and Finish
Housing and Eject Latches —
PBT, UL 94V-0 rated, blue
Posts — Phosphor bronze, plated as
follows:
Plating — Duplex plated, .000030
[0.00076] min. gold on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
.350
[8.89]
U
.826 ± .020 Long
[20.98 ± 0.51]
.665 ± .020
Short
[16.89 ± 0.51]
.240 ± .010
[6.10 ± 0.25]
.013
[0.33]
Position #1 Indicator
.576 ± .006 Long
[14.62 ± 0.15]
.419 ± .006
Short
[10.64 ± 0.15]
U
With Latches
.025 ± .001
[0.63 ± 0.03]
.350
[8.89]
Related Product Data
.025 ± .001
[0.63 ± 0.03]
.025 ± .001
[0.63 ± 0.03]
Eject Latches
Not Shown in
Top and Side
View for Clarity
Ø .031
[0.79]
Max.
± .015
C ± 0.38
[
]
Section U-U
A
U
.013
[0.33]
Electrical Characteristics —
page 75
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Position #1 Indicator
U
Without Latches
.100
[2.54]
Ø .035 ± .003
[0.89 ± 0.08]
.100
[2.54]
Recommended PC Board Layout
Dim. C
(Soldertail
Length)
.102
2.59
.165
4.19
Dimensions
No. of
Pos.
A
B
10
14
16
20
24
26
30
34
40
50
60
10
14
16
20
24
26
34
40
50
1.250 [31.75]
1.450 [36.83]
1.550 [39.37]
1.750 [44.45]
1.950[49.53]
2.050 [52.07]
2.250 [57.15]
2.450 [62.23]
2.750 [69.85]
3.250 [82.55]
3.750 [95.25]
1.250 [31.75]
1.450 [36.83]
1.550 [39.37]
1.750 [44.45]
1.950[49.53]
2.050 [52.07]
2.450 [62.23]
2.750 [69.85]
3.250 [82.55]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
Pin Header
without
Latches
1761693-3
—
—
—
1761693-8
—
—
1-1761693-1
—
—
1-1761693-6
1761694-3
—
—
—
—
1761694-9
—
—
—
Part Numbers
Pin Header with Short Latches
Pin Header with Long Latches
(Mates with Receptacles
(Mates with Receptacles
without Strain Relief)
with Strain Relief)
1761685-3
1761686-3
—
1761686-5
1761685-6
1761686-6
1761685-7
1761686-7
1761685-8
1761686-8
1761685-9
1761686-9
1-1761685-0
—
1-1761685-1
1-1761686-1
1-1761685-3
1-1761686-3
1-1761685-5
1-1761686-5
1-1761685-6
—
1761687-3
—
—
—
—
—
1761687-7
1761688-7
—
1761688-8
1761687-9
1761688-9
1-1761687-1
1-1761688-1
1-1761687-3
—
—
1-1761688-5
Note: All part numbers are RoHS compliant.
82
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers, Center Polarized,
.100 x .100 [2.54 x 2.54] Centerlines (Continued)
IDC Low Profile Headers
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
B
.013
[0.33]
Pin 2
.010
.252 +– .004
0.25
[6.40 +– 0.10 ]
.005
.350 +– .010
+ 0.13
[8.89 – 0.25 ]
.100
[2.54]
Pin 1
A
.025 ± .001
[0.63 ± 0.03]
Eject Latches
Not Shown in
Top and Side
View for Clarity
Material and Finish
Housing and Eject Latches —
PBT, UL 94V-0 rated, blue
Posts — Phosphor bronze, plated as
follows:
Plating — Duplex plated, .000030
[0.00076] min. gold on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
.350
[8.89]
.025 ± .001
[0.63 ± 0.03]
.826 ± .020
[20.98 ± 0.51]
Long
U
.665 ± .020
[16.89 ± 0.51]
Short
.013
[0.33]
± .015
C ± 0.38
[
]
Section U-U
A
.025 ± .001
[0.63 ± 0.03]
.100
[2.54]
.576 ± .006 Long .240 ± .010
[6.10 ± 0.25]
[14.62 ± 0.15]
.419 ± .006
Short
[10.64 ± 0.15]
U
With Latches
Position #1 Indicator
.030
[0.76]
Ø .031
[0.79]
Max.
U
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
.350
[8.89]
.013
[0.33]
U
Without Latches
Position #1 Indicator
.100
[2.54]
.100
[2.54]
Ø .035 ± .003
[0.89 ± 0.08]
Recommended PC Board Layout
Dim. C
(Soldertail
Length)
.102
2.59
.165
4.19
Dimensions
No. of
Pos.
A
B
16
24
26
30
60
10
34
40
1.550 [39.37]
1.950[49.53]
2.050 [52.07]
2.250 [57.15]
3.750 [95.25]
1.250 [31.75]
2.450 [62.23]
2.750 [69.85]
.700 [17.78]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
2.900 [73.66]
.400 [10.16]
1.600 [40.64]
1.900 [48.26]
Part Numbers
Pin Header with Long Latches
(Mates with Receptacles
with Strain Relief)
1761690-6
1761690-8
1761690-9
1-1761690-0
1-1761690-6
1761692-3
1-1761692-1
1-1761692-3
Note: All part numbers are RoHS compliant.
83
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
.100
[2.54]
Pin 2
.150
[3.81]
.165
[4.19]
.253
[6.43]
.190
[4.83]
.100
[2.54]
.336 .315
[8.53] [8.00]
.150
[3.81]
A
.050
[1.27]
.107
[2.72]
.025
[0.64]
B
Pin Header
with Latches
Ø .025
[0.64]
.240
[6.10]
Pin 1
.289
[7.34]
C
.110
or
[2.79]
.155
[3.94]
Solder Tail
Position No.1
Indicator
.096
[2.44] Dia.
2 Plc.
.025
[0.64]
•
Pin Header
without Latches
.106
[2.74]
.549
[13.94]
Material and Finish
D
Housing & Latches—Black PBT or
nylon, UL 94V-0 rated
Contacts — Brass; duplex plated (See
chart, page 85)
.195
[4.95]
Military, Center and Dual Polarized, Vertical Mount
Universal Ejection Style Pin Headers
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
No. of
Positions
10
14
Technical Documents
16
Product Specifications
108-40018 Pin Headers
20
24
26
30
34
40
50
60
64
A
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.700
43.18
1.900
48.26
2.200
55.88
2.700
68.58
3.200
81.28
3.400
86.36
B
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
Dimensions
C
D
1.260
.860
32.00
21.84
1.460
1.060
37.08
26.92
1.560
1.180
39.62
29.46
1.760
1.360
44.70
34.54
1.960
1.560
49.78
39.62
2.060
1.660
52.32
42.16
2.260
1.860
57.40
47.24
2.460
2.060
62.48
52.32
2.760
2.360
70.10
59.94
3.260
2.860
82.80
72.64
3.760
3.360
95.50
85.34
3.960
3.560
100.58
90.42
E
1.100
27.94
1.300
33.02
1.400
35.56
1.800
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
F
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.98
2.900
73.66
3.100
78.74
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot
for snap-in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual
polarization, located as shown.
Notes: 3. For information regarding latch/pin header applications and
for ordering latches separately, refer to page 96.
84
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End) (Continued)
Soldertail
Length
No. of
Positions
10
14
16
20
24
26
.110
2.79
30
34
40
50
60
64
10
14
16
24
26
.155
3.94
30
34
40
50
60
64
Pin Header
without
Latches
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
5102153-1
5102154-1
5102153-2
5102154-2
5102153-3
5102154-3
5102153-4
5102154-4
5102153-5
5102154-5
5102153-6
5102154-6
5102153-7
5102154-7
5102153-8
5102154-8
5102153-9
5102154-9
1-5102153-0
1-5102154-0
—
1-5102154-1
1-5102153-2
1-5102154-2
5102155-1
5102156-1
—
5102156-2
5102155-3
5102156-3
—
5102156-4
—
5102156-5
5102155-6
5102156-6
—
5102156-7
5102155-8
5102156-8
5102155-9
5102156-9
1-5102155-0
1-5102156-0
—
1-5102156-1
1-5102155-2
1-5102156-2
Pin Header w/
Short Latches
(Mates with AMP-LATCH
Receptacles without
Strain Relief)
5499910-1
5499160-1
5499910-2
5499160-2
5499910-3
5499160-3
5499910-4
5499160-4
5499910-5
—
5499910-6
5499160-6
5499910-7
—
5499910-8
5499160-8
5499910-9
5499160-9
1-5499910-0
1-5499160-0
—
—
—
1-5499160-2
—
5499374-1
—
5499374-2
—
—
—
5499374-4
—
5499374-5
—
5499374-6
—
—
5499911-8
5499374-8
5499911-9
5499374-9
—
1-5499374-0
—
—
—
—
Pin Header w/
Long Latches
(Mates with AMP-LATCH
Receptacles with
Strain Relief)
5499922-1
5499206-1
5499922-2
5499206-2
5499922-3
5499206-3
5499922-4
5499206-4
5499922-5
5499206-5
5499922-6
5499206-6
5499922-7
5499206-7
5499922-8
5499206-8
5499922-9
5499206-9
1-5499922-0
1-5499206-0
1-5499922-1
1-5499206-1
1-5499922-2
1-5499206-2
5499923-1
5102321-1
—
5102321-2
5499923-3
5102321-3
5499923-4
5102321-4
5499923-5
5102321-5
5499923-6
5102321-6
5499923-7
5102321-7
5499923-8
5102321-8
5499923-9
5102321-9
1-5499923-0
1-5102321-0
1-5499923-1
1-5102321-1
1-5499923-2
1-5102321-2
Military, Center and Dual Polarized, Vertical Mount
Universal Ejection Style Pin Headers
20
Contact
Finish
(Plating
Code)
Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Note: All part numbers are RoHS compliant.
85
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical applications and part nos. for
ordering this hardware are
presented below.
E
.106
[2.88] Dia.
(For Nut & Bolt
hardware)
F
.100
[2.54]
.100
[2.54]
.116
[2.95] Dia.
(For Self-Tapping
Screw hardware)
.060
[1.52]
.350
[8.89]
Position No. 1
.035
[0.89] Dia.
Recommended Mounting Hole Pattern
For Vertical PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.125 [3.18] for .155 [3.94] long posts.
Latch
(See Note
at left.)
2-56
Bolt & Nut
(2 Each Req‘d.)
.256
[6.50]
4-24
Self-Tapping
Screw
(2 Req‘d.)
Military, Center and Dual Polarized, Vertical Mount
Universal Ejection Style Pin Headers
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
Note: All part numbers are RoHS compliant.
86
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
.100
[2.54]
.150
[3.81]
.253
[6.43]
.165
[4.19]
.190
[4.83]
Pin 2
.336 .315
[8.53] [8.00]
.050
.150
[3.81] [1.27]
A
B
C
Pin 1
.240
[6.10]
.030
[0.76]
Pin Header
without Latches
.025
[0.64]
Material and Finish
Housing — Black PBT or nylon,
UL 94V-0 rated
Contacts—Copper alloy; duplex plated
(See chart, page 88)
.107
[2.72]
.174
.610
Tail
or
[4.42]
[15.49] Length
.289
[7.34]
.025
[0.64]
Position No. 1
Indicator
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
.549
[13.9]
Technical Documents
.025
[0.64]
No. of
Positions
10
14
16
20
24
26
30
34
40
50
60
64
A
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.700
43.18
1.900
48.26
2.200
55.88
2.700
68.58
3.200
81.28
3.400
86.36
B
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
Dimensions
C
1.260
32.00
1.460
37.08
1.560
39.62
1.760
44.70
1.960
49.78
2.060
52.32
2.260
57.40
2.460
62.48
2.760
70.10
3.260
82.80
3.760
95.50
3.960
100.58
D
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
E
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.96
2.900
73.66
3.100
78.74
Military, Center and Dual Polarized
Universal Ejection Style Pin Headers with ACTION PIN Contacts
Product Specifications
108-40019 Pin Headers with
ACTION PIN Contacts
Application Specification
114-40020 AMP-LATCH Universal
Headers with ACTION PIN Contacts
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snapin polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization,
located as shown.
Notes: 3. For information regarding latch/pin header applications and for
ordering latches separately, refer to page 96.
87
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Tail
Length
.174
[4.42]
.610
[15.49]
Pin Header
(without
Latches)
1658694-6
1658694-7
1658694-8
1658694-1
1658694-9
1658694-2
1-1658694-0
1-1658694-1
1658694-3
1658694-4
1658694-5
1658695-2
1658695-3
1658695-4
1658695-5
1658695-6
1658695-1
1658695-7
1658695-8
1658695-9
Contact
Finish
(Plating Code)
No. of
Positions
10
14
16
20
24
26
30
34
40
50
64
10
14
16
20
26
34
40
50
60
B
B
Military, Center and Dual Polarized
Universal Ejection Style Pin Headers with ACTION PIN Contacts
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076]
min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the tails,
over .000050 [0.00127] min nickel underplate or .000030 [0.00076] min. gold
on the mating surfaces, .000100 [0.00254] min. tin plate on the tails, over
.000050 [0.00127] min. nickel underplate.
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical applications and part nos. for
ordering this hardware are
presented on page 86.
D
E
.106
[2.69]Dia.
.100
[2.54]
.100
[2.54]
.060
[1.52]
Position No. 1
.350
[8.89]
*
Recommended Mounting Hole Pattern
For Vertical PCB Mount Header
With ACTION PIN Contacts
*For .080 [2.03] min. thick PCB refer to
Application Specification 114-40020 for hole
size and finish recommendations.
Note: All part numbers are RoHS compliant.
88
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Right-Angle PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
.100
[2.54]
Pin 2
.150
[3.81]
.253
[6.43]
.165
[4.19]
.190
[4.83]
.336 .315
[8.53] [8.00]
.050
[1.27]
.150
[3.81]
A
B
C
Pin 1
.025
[0.64]
Pos. No. 1 Indicator
.096
[2.44]
Pin Header
with Latches
.549
[13.94]
.108
[2.74]
.195
[4.95]
D
.025
[0.64] Dia.
.100
[2.54]
Pin Header
without Latches
.100
[2.54]
.240
[6.10]
.038
[0.97]
.110
.155
[2.79] or [3.94]
Typ.
Typ.
Solder Tail
Material and Finish
Housing & Latches — Black PBT or
nylon, UL 94V-0 rated
Contacts — Brass; duplex plated
(See chart, page 90)
Related Product Data
No. of
Positions
10
14
16
Technical Documents
20
Product Specifications
108-40018 Pin Headers
24
26
30
34
40
50
60
64
A
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.700
43.18
1.900
48.26
2.200
55.88
2.700
68.58
3.200
81.28
3.400
86.36
B
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
.289
[7.34]
Dimensions
C
D
1.260
.860
32.00
21.84
1.460
1.060
37.08
26.92
1.560
1.180
39.62
29.46
1.760
1.380
44.70
34.54
1.960
1.560
49.78
39.62
2.060
1.660
52.32
42.16
2.260
1.860
57.40
47.24
2.460
2.060
62.48
52.32
2.760
2.360
70.10
59.94
3.260
2.860
82.80
72.64
3.760
3.360
95.50
85.34
3.960
3.560
100.58
90.42
E
.860
21.84
1.060
26.92
1.180
29.46
1.380
34.54
1.560
39.62
1.660
42.16
1.860
47.24
2.060
52.32
2.360
59.94
2.860
72.64
3.360
85.34
3.560
90.42
F
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.98
2.900
73.66
3.100
78.74
Military, Center and Dual Polarized, Right-Angle
Universal Ejection Style Pin Headers
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
.025 .107
[0.64] [2.72]
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for
snap-in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization,
located as shown.
89
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Right-Angle PCB Mount
.025 [0.64] Sq. Posts
(Mating End) (Continued)
Soldertail
Length
No. of
Positions
10
14
16
20
24
26
.110
2.79
30
34
40
50
60
64
10
14
16
20
24
Military, Center and Dual Polarized, Right-Angle
Universal Ejection Style Pin Headers
26
.155
3.94
30
34
40
50
60
64
Contact
Finish
(Plating
Code)
Pin Header
without
Latches
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
5102159-1
5102160-1
5102159-2
—
5102159-3
5102160-3
5102159-4
5102160-4
—
5102160-5
5102159-6
5102160-6
5102159-7
—
5102159-8
5102160-8
5102159-9
5102160-9
1-5102159-0
1-5102160-0
1-5102159-1
1-5102160-1
1-5102159-2
1-5102160-2
—
5102162-1
5102161-2
5102162-2
—
—
5102161-4
—
5102161-5
5102162-5
—
—
5102161-7
5102162-7
5102161-8
5102162-8
—
—
—
1-5102162-0
—
1-5102162-1
—
1-5102162-2
Pin Header w/
Short Latches
(Mates with
Receptacles without
Strain Relief)
5499913-1
5499345-1
5499913-2
5499345-2
5499913-3
—
5499913-4
—
5499913-5
5499345-5
5499913-6
—
5499913-7
—
5499913-8
—
5499913-9
5499345-9
1-5499913-0
1-5499345-0
1-5499913-1
—
—
—
—
—
—
—
—
—
5499914-4
—
—
—
—
—
—
—
5499914-8
—
—
5499376-9
—
—
—
—
—
—
Pin Header w/
Long Latches
(Mates with
Receptacles with
Strain Relief)
5499786-1
5499141-1
5499786-2
5499141-2
—
5499141-3
5499786-4
5499141-4
5499786-5
—
5499786-6
5499141-6
—
5499141-7
5499786-8
5499141-8
5499786-9
5499141-9
1-5499786-0
1-5499141-0
1-5499786-1
1-5499141-1
1-5499786-2
1-5499141-2
—
5102322-1
5499925-2
5102322-2
—
5102322-3
—
5102322-4
5499925-5
5102322-5
—
5102322-6
—
—
—
5102322-8
—
—
1-5499925-0
—
—
—
—
—
Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Note: All part numbers are RoHS compliant.
90
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
No mounting hardware
is supplied by TE.
E
.106
Dia.
[2.69]
F
.100
[2.54]
.100
[2.54]
.029
[0.74]
.230
[5.84]
.035
Dia. Typ.
[0.89]
Position No.1
Recommended Mounting Hole Pattern
For Right-Angle PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.125 [3.18] for .155 [3.94] long posts.
Military, Center and Dual Polarized, Right-Angle
Universal Ejection Style Pin Headers
91
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pinless Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Sq. Posts
(without latches)
Pin 2
.100
[2.54] Dia.
2 Holes
E
.100
[2.54]
.150
[3.81]
.050
[1.27]
C
Pin 1
Position No.1 Indicator
Pinless Header
Material and Finish
•
Housing — Black PBT or nylon,
UL 94V-0 rated
.549
[13.9]
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
.315
[8.00]
B
A
.096
[2.44] Dia.
2 Holes
Technical Documents
Product Specifications
108-40018 Pin Headers
No. of
Pos.
10
14
16
20
24
Military, Center and Dual Polarized
Universal Ejection Style Pinless Headers
26
34
40
50
60
64
A
1.260
32.00
1.460
37.08
1.560
39.62
1.760
44.70
1.960
49.78
2.060
52.32
2.460
62.48
2.760
70.10
3.260
82.80
3.760
95.50
3.960
100.58
Dimensions
B
C
.860
21.84
1.060
26.92
1.160
29.46
1.360
34.54
1.560
39.62
1.660
42.16
2.060
52.32
2.360
59.94
2.860
72.64
3.360
85.34
3.560
90.42
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
E
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.600
40.64
1.900
48.26
2.400
60.96
2.900
73.66
3.100
78.74
Pinless Header Part Nos.
Press-Fit
Clearance-Fit
499726-1
102142-6
—
102142-8
—
102142-9
—
102142-1
—
1-102142-0
—
102142-2
499726-8
102142-3
499726-9
102142-4
1-499726-0
102142-5
1-499726-1
102142-7
1-499726-2
1-102142-3
Notes: 1. 10- and 14-position pinless headers have only one slot for snap-in polarizer (military polarization).
2. 10-position pinless headers have only one slot for dual polarization.
3. For information regarding latch/pin header applications and for ordering latches separately,
refer to page 96.
All part numbers are RoHS compliant.
Note: All part numbers are RoHS compliant.
92
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pinless Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Installation of Press-Fit
Pinless Headers
Insertion Instructions:
1. Place pinless header
over preinstalled posts
so that post tips start into
header cavities.
2. With bottom of pc board
supported, place steel
block over header. Steel
block must be wider and
longer than header so
that it covers all four sides
of the header. However,
for headers with latches
pre-assembled, the steel
block must not interfere
with the latches.
3. Apply an even, centered
force on steel block until
header bottoms on pc
board. If posts are longer
than .545 [13.84], they
may be forced against
the steel block before the
header is fully seated. In
this situation, extreme
caution must be taken so
that posts are not damaged or pushed out of
the pc board.
FORCE
FORCE
Steel Block
(Centered over
Header)
Pinless Header
.025 Sq. Posts
[0.64]
Preinstalled in
PC Board
.529
[13.44]
PC Board
Insertion Force: 60 lb. [267 N] max.
Retention Force: 20 lb. [89 N] min.
TE recommends the use of a typical manual frame assembly for insertion of
pinless headers. The frame assembly and steel block are not supplied by TE.
Military, Center and Dual Polarized
Universal Ejection Style Pinless Headers
93
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End)
.100 x .100 [2.54 x 2.54], .025 [0.64] Sq. Posts (Mating End)
Universal Ejection Style Pin Headers with PCT Housing
C
.195
[4.95]
.200
[5.08]
.549
[13.94]
.110
[2.79]
•
.025
[0.64]
Vertical PCB Mount
.040
[1.02]
Position No.1
Indicator
A
B
Pin 1
D
.250
[6.35]
.289
[7.34]
.150
[3.81]
.050
[1.27]
.100
[2.54]
.100
[2.54]
.150
[3.81]
Material and Finish
Housing — Red PCT, UL 94V-0 rated
Contacts — Brass; Gold flash over palladium-nickel plate, .000030 [0.00076]
min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the
soldertails, over .000050 [0.00127] min.
nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces,
.000100 [0.00254] min. tin plate on
the soldertails, over .000050 [0.00127]
min. nickel underplate
.165
[4.19]
.100
[2.54]
Ø .025
[0.64]
.129
[3.28]
Pin 2
.350
[8.89]
E
Vertical
C
.200
[5.08]
.040
[1.02]
.195
[4.95]
.549
[13.94]
.110 Dia.
[2.79] 2 Plc.
.096
[2.44]
•
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
.110
[2.79]
.315 .340
[8.00] [8.64]
Right-Angle PCB Mount
Related Product Data
.240
[6.10]
.100
[2.54]
.025
[0.64]
Position No.1
Indicator
Technical Documents
A
Product Specifications
108-40018 Pin Headers
Pin 1
B
.250
[6.35]
D
.150
[3.81]
.050
[1.27]
.100
[2.54]
.240
[6.10]
.110
[2.79]
.315 .340
[8.00] [8.64]
.100
[2.54]
.350
[8.89]
.100
[2.54]
.150
[3.81]
.165
[4.19]
E
.129
[3.28]
Pin 2
.289
[7.34]
.151
[3.84]
.100
[2.54]
Ø .025
[0.64]
Right-Angle
94
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) (Continued)
B
10
1.260
32.00
1.460
37.08
1.560
39.62
1.760
44.70
1.960
49.78
2.060
52.32
2.260
57.40
2.460
62.48
2.760
70.10
3.260
82.80
3.760
95.50
3.960
100.58
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
40.64
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
.860
21.84
1.060
26.92
1.160
29.46
1.360
34.54
1.560
39.62
1.660
42.16
1.860
47.24
2.060
52.32
2.360
59.94
2.860
72.64
3.360
85.34
3.560
90.42
14
16
20
24
26
30
34
40
50
60
64
D
E
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.700
43.18
1.900
48.26
2.200
55.88
2.700
68.58
3.200
81.28
3.400
86.36
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.98
2.900
73.66
3.100
78.74
Part Numbers
Vertical
Right-Angle
Pin Header
Pin Header
(without
(without
Latches)
Latches)
—
5111105-2
—
5111105-3
—
5111105-4
5111105-6
—
5111008-7
5111105-7
5111008-8
5111105-8
5111008-9
5111105-9
1-5111008-0
1-5111105-0
1-5111008-1
1-5111105-1
1-5111008-2
1-5111105-2
.106 Dia.
[2.69] Dia.
Typ.
.070
[1.78] Typ.
.060
[1.52]
CL of Holes
5111105-5
5111008-5
B
.100
[2.54]
Typ.
—
5111008-1
Position No. 1
.100
[2.54]
CL of Holes
.100 x .100 [2.54 x 2.54], .025 [0.64] Sq. Posts (Mating End)
Universal Ejection Style Pin Headers with PCT Housing
A
Dimensions
C
No. of
Pos.
.090
[2.29]
.110
[2.79]
of Stencil Pattern
.035
[0.89]
After Plating
Recommended PC Board Mounting Pattern for Vertical Header
Position No. 1
C
.100
[2.54]
CL of Holes
.100
[2.54]
Typ.
.029
[.736]
CL of Holes
.106 Dia.
[2.69] Dia.
Typ.
.070
[1.78] Typ.
.475 Max.*
[12.07]
.090
[2.29]
.035
[0.89]
After Plating
.110
[2.79]
of Stencil Pattern
Board Edge
Recommended Pc Board Mounting Pattern for Right-Angle Header
*Max. distance from edge of PC board for daisy chain applications
Note: All part numbers are RoHS compliant.
95
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Latches for Ejection Style Universal Pin Headers and Pinless Headers
Latches for Ejection Style Pin Headers and Pinless Headers
Latches
for use with Novo
Receptacles and Female
Socket Connectors, 609,
622 & 636 Series
Latch/Pin Header Applications
1.092
1.075
[27.72]
[27.31]
Material
Red PCT, UL 94V-0 Rated
.265
[6.73]
.576
[14.63]
Figure 1 — Use Long Latch for
AMP-LATCH Novo Receptacles with Strain Relief &
Female Socket Connectors with Strain Relief
Long Latch Part No. 111338-1
(See Figure 1)
.895
[22.73]
.416
[10.57]
.175
[4.45]
Short Latch Part No. 111293-1
(See Figure 2)
Figure 2 — Use Short Latch for
AMP-LATCH Novo Receptacles without Strain Relief &
Female Socket Connectors without Strain Relief
Material
Material
Black thermoplastic, UL 94V-0 Rated
Black thermoplastic, UL 94V-0 Rated
.576
[14.63]
.561
[14.25]
.475
[12.07]
.185
Ref.
[4.70]
.691
Ref.
[17.55]
Long Latch Part No. 102320-1
(See Figure 1)
.416
[10.57]
.140 ± .008
[3.56 ± 0.20]
Special Long Latch Part No. 1825851-1 for
AMPMODU Mod IV Housing with Center Polarization Key
Short Latch Part No. 102312-1
(See Figure 2)
Note: All part numbers are RoHS compliant.
96
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable Solutions
.100 [2.54] Centerline,
IDC Ribbon Cable,
PVC Insulation
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
B
A
Cable Solutions
.050
Typ.
[1.27]
C
Edge Mark
Dimensions
A
B
24 AWG 7/32 Tinned Copper
2
.100 [2.54]
.200 [5.08]
5
.400 [10.16]
.500 [12.70]
10
.900 [22.86] 1.000 [25.40]
15
1.400 [35.56] 1.500 [38.10]
20
1.900 [48.26] 2.000 [50.80]
25
2.400 [60.96] 2.500 [63.50]
28
2.700 [68.58] 2.800 [71.12]
26 AWG 7/34 Tinned Copper
2
.100 [2.54]
.200 [5.08]
5
.400 [10.16]
.500 [12.70]
10
.900 [22.86] 1.000 [25.40]
15
1.400 [35.56] 1.500 [38.10]
20
1.900 [48.26] 2.000 [50.80]
25
2.400 [60.96] 2.500 [63.50]
28
2.700 [68.58] 2.800 [71.12]
26 AWG 7/34 Overcoated Tinned Copper
2
.100 [2.54]
.200 [5.08]
5
.400 [10.16]
.500 [12.70]
10
.900 [22.86] 1.000 [25.40]
15
1.400 [35.56] 1.500 [38.10]
20
1.900 [48.26] 2.000 [50.80]
25
2.400 [60.96] 2.500 [63.50]
28
2.700 [68.58] 2.800 [71.12]
No. of
Conductors
.010
[0.25]
.100
[2.54]
Typ.
C
Part
Number
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
57746-2
57746-5
1-57746-0
1-57746-5
2-57746-0
2-57746-5
2-57746-8
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
57744-2
57744-5
1-57744-0
1-57744-5
2-57744-0
2-57744-5
2-57744-8
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
.039 [0.99]
57745-2
57745-5
1-57745-0
1-57745-5
2-57745-0
2-57745-5
2-57745-8
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Dimensions
A
B
24 AWG 7/32 Overcoated Tinned Copper
2
.100 [2.54]
.200 [5.08]
5
.400 [10.16]
.500 [12.70]
10
.900 [22.86] 1.000 [25.40]
15
1.400 [35.56] 1.500 [38.10]
20
1.900 [48.26] 2.000 [50.80]
25
2.400 [60.96] 2.500 [63.50]
28
2.700 [68.58] 2.800 [71.12]
22 AWG 7/30 Tinned Copper
2
.100 [2.54]
.200 [5.08]
5
.400 [10.16]
.500 [12.70]
10
.900 [22.86] 1.000 [25.40]
15
1.400 [35.56] 1.500 [38.10]
20
1.900 [48.26] 2.000 [50.80]
25
2.400 [60.96] 2.500 [63.50]
28
2.700 [68.58] 2.800 [71.12]
No. of
Conductors
C
Part
Number
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
.044 [1.12]
57747-2
57747-5
1-57747-0
1-57747-5
2-57747-0
2-57747-5
2-57747-8
.051 [1.30]
.051 [1.30]
.051 [1.30]
.051 [1.30]
.051 [1.30]
.051 [1.30]
.051 [1.30]
57748-2
57748-5
1-57748-0
1-57748-5
2-57748-0
2-57748-5
2-57748-8
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineering questions or for order placement of this cable.
97
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable Solutions (Continued)
.156 [3.96] Centerline,
Flat Ribbon Cable,
PVC Insulation
Product Specifications
Cable Solutions
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
B
A
.078
Typ.
[1.98]
C
Edge Mark
No. of
Conductors
A
22 AWG 7/30 Tinned Copper
2
.156 [3.96]
5
.624 [15.85]
10
1.404 [35.66]
15
2.184 [55.47]
20
2.964 [75.29]
24
3.588 [91.14]
18 AWG 7/26 Tinned Copper
2
.156 [3.96]
5
.624 [15.85]
10
1.404 [35.66]
15
2.184 [55.47]
20
2.964 [75.29]
24
3.588 [91.14]
.010
[0.25]
.156
[3.96]
Typ.
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Dimensions
B
C
Part
Number
.312 [7.92]
.780 [19.81]
1.560 [39.62]
2.340 [59.44]
3.120 [79.25]
3.744 [95.10]
.051 [1.30]
.051 [1.30]
.051 [1.30]
.051 [1.30]
.051 [1.30]
.051 [1.30]
57750-2
57750-5
1-57750-0
1-57750-5
2-57750-0
2-57750-4
.312 [7.92]
.780 [19.81]
1.560 [39.62]
2.340 [59.44]
3.120 [79.25]
3.744 [95.10]
.068 [1.73]
.068 [1.73]
.068 [1.73]
.068 [1.73]
.068 [1.73]
.068 [1.73]
57752-2
57752-5
1-57752-0
1-57752-5
2-57752-0
2-57752-4
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineering questions or for order placement of this cable.
98
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
19156
57034
57040
57744
57745
57746
57747
57748
57750
57752
100411
102142
102198
102312
102320
104068
104069
104069
104072
104652
104655
104656
104693
104891
104892
104893
104894
104895
111196
111293
111338
111382
111446
111451
111492
111494
111504
111506
111547
111614
111620
111623
111626
120623
147121
147381
147382
147383
147384
147413
147503
174638
174903
175629
175637
Page
86
47
47
97
97
97
97
97
98
98
41
92
86
96
96
9, 10
9, 11
11
65
20
21
21
21
27
26
26
24
24
9
96
96
58
45
63
45
46
45
46
67
68
64
17
17
63
21
21
21
21
20
20
21
62
62
62
62
Part No.
188275
188431
215079
215083
215083
215460
215460
215464
215570
338068
338069
338070
338095
338096
338097
338728
499252
499712
499726
499991
746383
746603
746610
746611
1377074
1437006
1437011
1437020
1437021
1437022
1437023
1437024
1437025
1437026
1437027
1437028
1437029
1499252
1658525
1658526
1658527
1658528
1658618
1658619
1658620
1658621
1658622
1658623
1658624
1658694
1658695
1734161
1734162
1761606
1761607
Page
36
41
32, 33, 34
38
32, 33, 38
35
32, 33, 35
32, 33, 37
32, 33, 39
41
41
41
32, 33, 40
32, 33, 40
32, 33, 40
41
14, 49, 50, 51, 68
65
92
63
86
47
58
59
44
56
69
67
67
67
64, 69
69
69
69
69
69
69
68
57
55
53
53
14
14
49
50
50
49
51
88
88
15
15
80
81
Part No.
1761608
1761609
1761685
1761686
1761687
1761688
1761690
1761692
1761693
1761694
1825851
1888188
5088450
5102153
5102154
5102155
5102156
5102159
5102160
5102161
5102162
5102321
5102322
5103308
5103309
5103310
5103311
5104338
5104340
5111008
5111105
5111448
5111595
5111824
5499141
5499160
5499206
5499345
5499374
5499376
5499786
5499910
5499911
5499913
5499914
5499922
5499923
5499925
5746612
5746613
5746615
6437006
6489700
Page
80
81
82
82
82
82
83
83
82
82
96
15
66
85
85
85
85
90
90
90
90
85
90
76
76
77
77
78
79
95
95
46
12
15
90
85
85
90
85
90
90
85
85
90
90
85
85
90
59
59
60
61
15
99
Catalog 82012
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity Catalog 82012 Revised 4-12
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
82012 LUG PDF 04/2012
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
Ribbon Cable Interconnect Solutions
te.com
Ribbon Cable
Interconnect Solutions