Fairchild FQB55N06TM 60v n-channel mosfet Datasheet

QFET
TM
FQB55N06 / FQI55N06
60V N-Channel MOSFET
General Description
Features
These N-Channel enhancement mode power field effect
transistors are produced using Fairchild’s proprietary,
planar stripe, DMOS technology.
This advanced technology has been especially tailored to
minimize on-state resistance, provide superior switching
performance, and withstand high energy pulse in the
avalanche and commutation mode. These devices are well
suited for low voltage applications such as automotive, DC/
DC converters, and high efficiency switching for power
management in portable and battery operated products.
•
•
•
•
•
•
•
55A, 60V, RDS(on) = 0.020Ω @VGS = 10 V
Low gate charge ( typical 35 nC)
Low Crss ( typical 85 pF)
Fast switching
100% avalanche tested
Improved dv/dt capability
175°C maximum junction temperature rating
D
D
!
"
G
S
D2-PAK
G D S
FQB Series
Absolute Maximum Ratings
Symbol
VDSS
ID
! "
"
"
G!
I2-PAK
!
FQI Series
S
TC = 25°C unless otherwise noted
Parameter
Drain-Source Voltage
- Continuous (TC = 25°C)
Drain Current
FQB55N06 / FQI55N06
60
Units
V
55
A
- Continuous (TC = 100°C)
IDM
Drain Current
- Pulsed
(Note 1)
38.9
A
220
A
VGSS
Gate-Source Voltage
± 25
V
EAS
Single Pulsed Avalanche Energy
(Note 2)
545
mJ
IAR
Avalanche Current
(Note 1)
55
A
EAR
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt
Power Dissipation (TA = 25°C) *
(Note 1)
13.3
7.0
3.75
mJ
V/ns
W
133
0.89
-55 to +175
W
W/°C
°C
300
°C
dv/dt
PD
TJ, TSTG
TL
(Note 3)
Power Dissipation (TC = 25°C)
- Derate above 25°C
Operating and Storage Temperature Range
Maximum lead temperature for soldering purposes,
1/8" from case for 5 seconds
Thermal Characteristics
Symbol
RθJC
Parameter
Thermal Resistance, Junction-to-Case
Typ
--
Max
1.13
Units
°C/W
RθJA
Thermal Resistance, Junction-to-Ambient *
--
40
°C/W
RθJA
Thermal Resistance, Junction-to-Ambient
--
62.5
°C/W
* When mounted on the minimum pad size recommended (PCB Mount)
©2001 Fairchild Semiconductor Corporation
Rev. A1. May 2001
FQB55N06 / FQI55N06
May 2001
Symbol
TC = 25°C unless otherwise noted
Parameter
Test Conditions
Min
Typ
Max
Units
Off Characteristics
BVDSS
Drain-Source Breakdown Voltage
VGS = 0 V, ID = 250 µA
60
--
--
V
∆BVDSS
/ ∆TJ
Breakdown Voltage Temperature
Coefficient
ID = 250 µA, Referenced to 25°C
--
0.06
--
V/°C
IDSS
IGSSF
IGSSR
VDS = 60 V, VGS = 0 V
--
--
1
µA
VDS = 48 V, TC = 150°C
--
--
10
µA
Gate-Body Leakage Current, Forward
VGS = 25 V, VDS = 0 V
--
--
100
nA
Gate-Body Leakage Current, Reverse
VGS = -25 V, VDS = 0 V
--
--
-100
nA
2.0
--
4.0
V
--
0.015
0.020
Ω
--
30
--
S
--
1300
1690
pF
--
490
640
pF
--
85
110
pF
Zero Gate Voltage Drain Current
On Characteristics
VGS(th)
Gate Threshold Voltage
VDS = VGS, ID = 250 µA
RDS(on)
Static Drain-Source
On-Resistance
VGS = 10 V, ID = 27.5 A
gFS
Forward Transconductance
VDS = 25 V, ID = 27.5 A
(Note 4)
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
VDS = 25 V, VGS = 0 V,
f = 1.0 MHz
Switching Characteristics
td(on)
Turn-On Delay Time
tr
Turn-On Rise Time
td(off)
Turn-Off Delay Time
tf
Turn-Off Fall Time
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
VDD = 30 V, ID = 27.5 A,
RG = 25 Ω
(Note 4, 5)
VDS = 48 V, ID = 55 A,
VGS = 10 V
(Note 4, 5)
--
15
40
ns
--
130
270
ns
--
60
130
ns
--
75
160
ns
--
35
46
nC
--
9.5
--
nC
--
15.5
--
nC
Drain-Source Diode Characteristics and Maximum Ratings
IS
Maximum Continuous Drain-Source Diode Forward Current
--
--
55
A
ISM
--
--
220
A
VSD
Maximum Pulsed Drain-Source Diode Forward Current
VGS = 0 V, IS = 55 A
Drain-Source Diode Forward Voltage
--
--
1.5
V
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
VGS = 0 V, IS = 55 A,
dIF / dt = 100 A/µs
(Note 4)
--
55
--
ns
--
80
--
nC
Notes:
1. Repetitive Rating : Pulse width limited by maximum junction temperature
2. L = 210µH, IAS = 55A, VDD = 25V, RG = 25 Ω, Starting TJ = 25°C
3. ISD ≤ 55A, di/dt ≤ 300A/µs, VDD ≤ BVDSS, Starting TJ = 25°C
4. Pulse Test : Pulse width ≤ 300µs, Duty cycle ≤ 2%
5. Essentially independent of operating temperature
©2001 Fairchild Semiconductor Corporation
Rev. A1. May 2001
FQB55N06 / FQI55N06
Electrical Characteristics
FQB55N06 / FQI55N06
Typical Characteristics
VGS
15.0 V
10.0 V
8.0 V
7.0 V
6.0 V
5.5 V
5.0 V
Bottom : 4.5 V
Top :
ID, Drain Current [A]
2
10
ID, Drain Current [A]
2
10
1
10
1
10
175℃
25℃
※ Notes :
1. 250μ s Pulse Test
2. TC = 25℃
0
10
※ Notes :
1. VDS = 25V
2. 250μ s Pulse Test
-55℃
0
-1
0
10
10
1
10
2
10
4
6
8
10
VGS, Gate-Source Voltage [V]
VDS, Drain-Source Voltage [V]
Figure 1. On-Region Characteristics
Figure 2. Transfer Characteristics
50
2
10
VGS = 10V
IDR, Reverse Drain Current [A]
R DS(ON) [mΩ ],
Drain-Source On-Resistance
40
30
VGS = 20V
20
1
10
10
※ Note : TJ = 25℃
175℃
※ Notes :
1. VGS = 0V
2. 250μ s Pulse Test
25℃
0
0
50
100
150
200
0
10
ID, Drain Current [A]
0.2
0.6
0.8
Coss
※ Notes :
1. VGS = 0 V
2. f = 1 MHz
Ciss
Crss
V GS , Gate-Source Voltage [V]
Capacitance [pF]
1.4
1.6
12
10
1000
1.2
Figure 4. Body Diode Forward Voltage
Variation vs. Source Current
and Temperature
Ciss = Cgs + Cgd (Cds = shorted)
Coss = Cds + Cgd
Crss = Cgd
3000
2000
1.0
VSD, Source-Drain voltage [V]
Figure 3. On-Resistance Variation vs.
Drain Current and Gate Voltage
4000
0.4
VDS = 30V
VDS = 48V
8
6
4
2
※ Note : ID = 55A
0
0
0
-1
10
0
10
VDS, Drain-Source Voltage [V]
Figure 5. Capacitance Characteristics
©2001 Fairchild Semiconductor Corporation
5
10
15
20
25
30
35
40
1
10
QG, Total Gate Charge [nC]
Figure 6. Gate Charge Characteristics
Rev. A1. May 2001
(Continued)
1.2
2.5
2.0
1.1
RDS(ON) , (Normalized)
Drain-Source On-Resistance
BV DSS , (Normalized)
Drain-Source Breakdown Voltage
FQB55N06 / FQI55N06
Typical Characteristics
1.5
1.0
1.0
※ Notes :
1. VGS = 0 V
2. ID = 250 μ A
0.9
0.8
-100
-50
0
50
100
※ Notes :
1. VGS = 10 V
2. ID = 27.5 A
0.5
150
200
0.0
-100
-50
10
Figure 8. On-Resistance Variation
vs. Temperature
3
50
100 µ s
2
DC
1
※ Notes :
40
30
20
10
o
1. TC = 25 C
o
2. TJ = 175 C
3. Single Pulse
0
10
200
60
ID , Drain Current [A]
ID , Drain Current [A]
150
Figure 7. Breakdown Voltage Variation
vs. Temperature
1 ms
10
100
TJ, Junction Temperature [ C]
10 ms
10
50
TJ, Junction Temperature [ C]
Operation in This Area
is Limited by R DS(on)
10
0
o
o
-1
10
0
1
10
10
2
0
25
50
Figure 9. Maximum Safe Operating Area
75
100
125
150
175
TC, Case Temperature [℃]
VDS, Drain-Source Voltage [V]
Figure 10. Maximum Drain Current
vs. Case Temperature
PDM
t1
t2
Figure 11. Transient Thermal Response Curve
©2001 Fairchild Semiconductor Corporation
Rev. A1. May 2001
FQB55N06 / FQI55N06
Gate Charge Test Circuit & Waveform
VGS
Same Type
as DUT
50KΩ
Qg
200nF
12V
10V
300nF
VDS
VGS
Qgs
Qgd
DUT
3mA
Charge
Resistive Switching Test Circuit & Waveforms
VDS
RL
VDS
90%
VDD
VGS
RG
VGS
DUT
10V
10%
tr
td(on)
td(off)
t on
tf
t off
Unclamped Inductive Switching Test Circuit & Waveforms
BVDSS
1
EAS = ---- L IAS2 -------------------2
BVDSS - VDD
L
VDS
BVDSS
IAS
ID
RG
VDD
DUT
10V
tp
©2001 Fairchild Semiconductor Corporation
ID (t)
VDS (t)
VDD
tp
Time
Rev. A1. May 2001
FQB55N06 / FQI55N06
Peak Diode Recovery dv/dt Test Circuit & Waveforms
DUT
+
VDS
_
I SD
L
Driver
RG
VGS
VGS
( Driver )
Same Type
as DUT
VDD
• dv/dt controlled by RG
• ISD controlled by pulse period
Gate Pulse Width
D = -------------------------Gate Pulse Period
10V
IFM , Body Diode Forward Current
I SD
( DUT )
di/dt
IRM
Body Diode Reverse Current
VDS
( DUT )
Body Diode Recovery dv/dt
VSD
VDD
Body Diode
Forward Voltage Drop
©2001 Fairchild Semiconductor Corporation
Rev. A1. May 2001
FQB55N06 / FQI55N06
Package Dimensions
4.50 ±0.20
9.90 ±0.20
+0.10
2.00 ±0.10
2.54 TYP
(0.75)
°
~3
0°
0.80 ±0.10
1.27 ±0.10
2.54 ±0.30
15.30 ±0.30
0.10 ±0.15
2.40 ±0.20
4.90 ±0.20
1.40 ±0.20
9.20 ±0.20
1.30 –0.05
1.20 ±0.20
(0.40)
D2PAK
+0.10
0.50 –0.05
2.54 TYP
9.20 ±0.20
(2XR0.45)
4.90 ±0.20
15.30 ±0.30
10.00 ±0.20
(7.20)
(1.75)
10.00 ±0.20
(8.00)
(4.40)
0.80 ±0.10
©2001 Fairchild Semiconductor Corporation
Rev. A1. May 2001
(Continued)
I2PAK
4.50 ±0.20
(0.40)
9.90 ±0.20
+0.10
MAX13.40
9.20 ±0.20
(1.46)
1.20 ±0.20
1.30 –0.05
0.80 ±0.10
2.54 TYP
2.54 TYP
10.08 ±0.20
1.47 ±0.10
MAX 3.00
(0.94)
13.08 ±0.20
)
5°
(4
1.27 ±0.10
+0.10
0.50 –0.05
2.40 ±0.20
10.00 ±0.20
©2001 Fairchild Semiconductor Corporation
Rev. A1. May 2001
FQB55N06 / FQI55N06
Package Dimensions
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DenseTrench™
DOME™
EcoSPARK™
E2CMOS™
EnSigna™
FACT™
FACT Quiet Series™
FAST®
FASTr™
FRFET™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
LittleFET™
MicroFET™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
PowerTrench®
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SLIENT SWITCHER®
SMART START™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
UHC™
UltraFET®
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
©2001 Fairchild Semiconductor Corporation
Rev. H2
Similar pages