ETC 3-1437064-5

IDC Systems
Headers
PRODUCT DESCRIPTION
PCB Male Headers provide reliability,
convenience and positive polarization
when mated with Female Socket
Transition Connectors in PC board
applications which require repeated
connection and disconnection.
Optional retainer-ejector latches
easily disengage the header and
female socket, eliminating stress in
the cable termination and solder joint
areas during disconnect.
HEADERS
DESIGN ADVANTAGES
• Industry standard polarization
mates with center bump as well as
dual slot polarized female socket
connectors.
• Available in .050 x .100, .100 x
.100, .100 x .200 and .100 x .300
center spacing.
• Available in standard, low profile,
vertical eject, compliant pin and
surface mount configurations.
• Available in
materials.
high
temperature
HEADER INDEX
.050" x .100" 2-Row Straight Tail ............................................18
.050" x .100" 2-Row Right Angle Tails ....................................20
.050" x .100" 4-Row Right Angle Tails ....................................22
.050" x .100" 2-Row Unshrouded Header, Straight ................24
.050" x .100" 2-Row Unshrouded Header, Right Angle ..........25
.100" x .100" Straight Standard Header..................................26
.100" x .100" Right Angle Standard Header............................27
.100" x .100" High Temp. Straight Standard Header ..............28
.100" x .100" High Temp. Right Angle Standard Header ........29
.100" x .100" Low Profile Straight w/ejectors ........................30
.100" x .100" Low Profile Right Angle w/ejectors ..................31
.100" x .100" Low Profile Straight ..........................................32
.100" x .100" Low Profile Right Angle ....................................33
.100" x .100" Low Profile Straight, High Temp. ......................34
.100" x .100" Low Profile Right Angle, High Temp. ................35
.100" x .100" Low Profile Straight w/latches ..........................36
.100" x .100" Low Profile Right Angle w/latches ..................37
.100" x .100" Flex-Fit™ with Retainer/Ejector ........................38
.100" x .100" Flex-Fit™ Low Profile ......................................39
.100" x .100" Surface Mount ..................................................40
Pin Strip Headers, Single Row Straight ................................41
Pin Strip Headers, Single Row Right Angle ..........................42
Pin Strip Headers, Dual Row Straight ....................................43
Pin Strip Headers, Dual Row Right Angle ............................44
Dip Socket Headers, 14 and 16 Positions ............................45
Accessories..............................................................................46
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
17
LR92984
E60980
IDC Systems
Headers
STRAIGHT
STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
ACCESSORIES
POLARIZING KEY: See page 46
609 - XX XX
# of Positions
Tail Style
R (PCB Retention)
E (Ejector)
ES Ejector for
Strain Relief
Ordering Information
PCB 1.57MM (.062)
D=2.9MM (.114)
STRAIGHT
CATALOG NUMBERS
PCB 3.18 MM(.125)
D=4.48MM (.176)
STRAIGHT
WIREWRAP
D=15.5MM (.610)
STRAIGHT
DIMENSIONS IN MM (INCHES)
609-0624
609-0634
609-1024
609-1034
609-1224
609-1424
NO.
OF
POS.
A
609-0654
6
609-1054
10
609-1234
609-1254
609-1434
609-1454
609-1624
609-1634
609-2024
609-2424
B
C
27.05 (1.07)
22.86 (.90)
16.76 (.66)
32.13 (1.26)
27.94 (1.10)
21.64 (.85)
12
34.64 (1.36)
30.48 (1.20)
24.38 (.96)
14
37.21 (1.46)
33.02 (1.30)
26.92 (1.06)
609-1654
16
39.75 (1.56)
35.56 (1.40)
29.46 (1.16)
609-2034
609-2054
20
44.83 (1.76)
40.64 (1.60)
34.54 (1.36)
609-2434
609-2454
24
49.88 (1.96)
45.72 (1.80)
39.62 (1.56)
609-2624
609-2634
609-2654
26
52.45 (2.06)
48.26 (1.90)
42.16 (1.66)
609-3024
609-3034
609-3054
30
57.50 (2.26)
53.34 (2.10)
47.26 (1.86)
609-3424
609-3434
609-3454
34
62.61 (2.46)
58.42 (2.30)
52.32 (2.06)
609 3624
609-3634
609-3654
36
65.12 (2.56)
60.96 (2.40)
54.86 (2.16)
609-4024
609-4034
609-4054
40
70.23 (2.76)
66.04 (2.60)
59.94 (2.36)
609-4424
609-4434
609-4454
44
75.31 (2.96)
71.12 (2.80)
65.02 (2.56)
609-5024
609-5034
609-5054
50
82.93 (3.26)
78.74 (3.10)
72.64 (2.86)
609-6024
609-6034
609-6054
60
95.63 (3.76)
91.44 (3.60)
85.35 (3.36)
609-6424
609-6434
609-6454
64
100.71 (3.96)
96.52 (3.80)
90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
26
IDC Systems
Headers
RIGHT ANGLE
STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
ACCESSORIES
POLARIZING KEY: See page 46
609 - XX XX
# of Positions
Tail Style
R (PCB Retention)
E (Ejector)
ES Ejector for
Strain Relief
Ordering Information
PCB 1.57MM (.062)
D=2.9MM (.114)
RIGHT ANGLE
CATALOG NUMBERS
PCB 3.18 MM(.125)
D=4.48MM (.176)
RIGHT ANGLE
WIREWRAP
D=15.5MM (.610)
RIGHT ANGLE
DIMENSIONS IN MM (INCHES)
609-0604
609-0614
609-1004
609-1014
609-1204
609-1404
NO.
OF
POS.
A
609-0644
6
609-1044
10
609-1214
609-1244
609-1414
609-1444
609-1604
609-1614
609-2004
609-2404
B
C
27.05 (1.07)
22.86 (.90)
16.76 (.66)
32.13 (1.26)
27.94 (1.10)
21.64 (.85)
12
34.64 (1.36)
30.48 (1.20)
24.38 (.96)
14
37.21 (1.46)
33.02 (1.30)
26.92 (1.06)
609-1644
16
39.75 (1.56)
35.56 (1.40)
29.46 (1.16)
609-2014
609-2044
20
44.83 (1.76)
40.64 (1.60)
34.54 (1.36)
609-2414
609-2444
24
49.88 (1.96)
45.72 (1.80)
39.62 (1.56)
609-2604
609-2614
609-2644
26
52.45 (2.06)
48.26 (1.90)
42.16 (1.66)
609-3004
609-3014
609-3044
30
57.50 (2.26)
53.34 (2.10)
47.26 (1.86)
609-3404
609-3414
609-3444
34
62.61 (2.46)
58.42 (2.30)
52.32 (2.06)
609-3604
609-3614
609-3644
36
65.12 (2.56)
60.96 (2.40)
54.86 (2.16)
609-4004
609-4014
609-4044
40
70.23 (2.76)
66.04 (2.60)
59.94 (2.36)
609-4404
609-4414
609-4444
44
75.31 (2.96)
71.12 (2.80)
65.02 (2.56)
609-5004
609-5014
609-5044
50
82.93 (3.26)
78.74 (3.10)
72.64 (2.86)
609-6004
609-6014
609-6044
60
95.63 (3.76)
91.44 (3.60)
85.35 (3.36)
609-6404
609-6414
609-6444
64
100.71 (3.96)
96.52 (3.80)
90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
27
IDC Systems
Headers
HIGH TEMPERATURE STRAIGHT
STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR LATCHES
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, Infrared and vapor phase
process compatible
COLOR: Black
CONTACT MATERIAL: Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
SOLDER REFLOW TEMPERATURE RATING: -109˚C To
245°C (275° for 30 sec., depending on reflow profile)
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
ACCESSORIES
POLARIZING KEY: See page 46
HT
609 - XX XX
High Temp
# of Positions
Tail Style
Ordering Information
R (PCB Retention)
E (Ejector)
ES Ejector for Strain Relief
PCB 1.57MM (.062)
D=2.9MM (.114)
STRAIGHT
CATALOG NUMBERS
PCB 3.18 MM(.125)
D=4.48MM (.176)
STRAIGHT
WIREWRAP
D=15.5MM (.610)
STRAIGHT
DIMENSIONS IN MM (INCHES)
609-0624**HT
609-0634**HT
609-1024**HT
609-1034**HT
609-1224**HT
609-1424**HT
NO.
OF
POS.
A
609-0654**HT
6
609-1054**HT
10
609-1234**HT
609-1254**HT
609-1434**HT
609-1454**HT
609-1624**HT
609-1634**HT
609-2024**HT
609-2424**HT
B
C
27.05 (1.07)
22.86 (.90)
16.76 (.66)
32.13 (1.26)
27.94 (1.10)
21.64 (.85)
12
34.64 (1.36)
30.48 (1.20)
24.38 (.96)
14
37.21 (1.46)
33.02 (1.30)
26.92 (1.06)
609-1654**HT
16
39.75 (1.56)
35.56 (1.40)
29.46 (1.16)
609-2034**HT
609-2054**HT
20
44.83 (1.76)
40.64 (1.60)
34.54 (1.36)
609-2434**HT
609-2454**HT
24
49.88 (1.96)
45.72 (1.80)
39.62 (1.56)
609-2624**HT
609-2634**HT
609-2654**HT
26
52.45 (2.06)
48.26 (1.90)
42.16 (1.66)
609-3024**HT
609-3034**HT
609-3054**HT
30
57.50 (2.26)
53.34 (2.10)
47.26 (1.86)
609-3424**HT
609-3434**HT
609-3454**HT
34
62.61 (2.46)
58.42 (2.30)
52.32 (2.06)
609 3624**HT
609-3634**HT
609-3654**HT
36
65.12 (2.56)
60.96 (2.40)
54.86 (2.16)
609-4024**HT
609-4034**HT
609-4054**HT
40
70.23 (2.76)
66.04 (2.60)
59.94 (2.36)
609-4424**HT
609-4434**HT
609-4454**HT
44
75.31 (2.96)
71.12 (2.80)
65.02 (2.56)
609-5024**HT
609-5034**HT
609-5054**HT
50
82.93 (3.26)
78.74 (3.10)
72.64 (2.86)
609-6024**HT
609-6034**HT
609-6054**HT
60
95.63 (3.76)
91.44 (3.60)
85.35 (3.36)
609-6424**HT
609-6434**HT
609-6454**HT
64
100.71 (3.96)
96.52 (3.80)
90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
28
IDC Systems
Headers
HIGH TEMPERATURE
RIGHT ANGLE STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR LATCHES
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, Infrared and vapor phase
process compatible
COLOR: Black
CONTACT MATERIAL: Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
ACCESSORIES
POLARIZING KEY: See page 46
HT
609 - XX XX
High Temp
# of Positions
Tail Style
Ordering Information
R (PCB Retention)
E (Ejector)
ES Ejector for Strain Relief
PCB 1.57MM (.062)
D=2.9MM (.114)
RIGHT ANGLE
CATALOG NUMBERS
PCB 3.18 MM(.125)
D=4.48MM (.176)
RIGHT ANGLE
WIREWRAP
D=15.5MM (.610)
RIGHT ANGLE
DIMENSIONS IN MM (INCHES)
609-0604**HT
609-0614**HT
609-1004**HT
609-1014**HT
609-1204**HT
609-1404**HT
NO.
OF
POS.
A
609-0644**HT
6
609-1044**HT
10
609-1214**HT
609-1244**HT
609-1414**HT
609-1444**HT
609-1604**HT
609-1614**HT
609-2004**HT
609-2404**HT
B
C
27.05 (1.07)
22.86 (.90)
16.76 (.66)
32.13 (1.26)
27.94 (1.10)
21.64 (.85)
12
34.64 (1.36)
30.48 (1.20)
24.38 (.96)
14
37.21 (1.46)
33.02 (1.30)
26.92 (1.06)
609-1644**HT
16
39.75 (1.56)
35.56 (1.40)
29.46 (1.16)
609-2014**HT
609-2044**HT
20
44.83 (1.76)
40.64 (1.60)
34.54 (1.36)
609-2414**HT
609-2444**HT
24
49.88 (1.96)
45.72 (1.80)
39.62 (1.56)
609-2604**HT
609-2614**HT
609-2644**HT
26
52.45 (2.06)
48.26 (1.90)
42.16 (1.66)
609-3004**HT
609-3014**HT
609-3044**HT
30
57.50 (2.26)
53.34 (2.10)
47.26 (1.86)
609-3404**HT
609-3414**HT
609-3444**HT
34
62.61 (2.46)
58.42 (2.30)
52.32 (2.06)
609-3604**HT
609-3614**HT
609-3644**HT
36
65.12 (2.56)
60.96 (2.40)
54.86 (2.16)
609-4004**HT
609-4014**HT
609-4044**HT
40
70.23 (2.76)
66.04 (2.60)
59.94 (2.36)
609-4404**HT
609-4414**HT
609-4444**HT
44
75.31 (2.96)
71.12 (2.80)
65.02 (2.56)
609-5004**HT
609-5014**HT
609-5044**HT
50
82.93 (3.26)
78.74 (3.10)
72.64 (2.86)
609-6004**HT
609-6014**HT
609-6044**HT
60
95.63 (3.76)
91.44 (3.60)
85.35 (3.36)
609-6404**HT
609-6414**HT
609-6444**HT
64
100.71 (3.96)
96.52 (3.80)
90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
29
IDC Systems
Headers
LOW PROFILE HEADERS
WITH VERTICAL
RETAINER/EJECTOR
LATCHES, STRAIGHT PINS
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel plating
.025 Sq. pin w/coined edges
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTOR
FEMALE SOCKETS: See pages 9-13
ACCESSORIES
POLARIZING KEY: See page 46
501 - XX XX
# of Positions
Tail Style
R (PCB Retention)
E (Ejector)
ES Ejector for Strain Relief
Ordering Information
CATALOG NUMBERS
DIMENSION “D” IN MM (INCHES)
2.59 (.102)
4.19 (.165)
FOR 1.57 (.062)
FOR 3.18 (.125)
P.C. BOARDS
P.C. BOARDS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
501-0627XX
501-0637XX
6
15.24 (.600)
7.11 (.280)
5.08 (.200)
501-1027XX
501-1037XX
10
20.32 (.800)
12.19 (.480)
10.16 (.400)
501-1227XX
501-1237XX
12
22.86 (.900)
14.73 (.580)
12.70 (.500)
501-1427XX
501-1437XX
14
25.40 (1.000)
17.27 (.680)
15.24 (.600)
501-1627XX
501-1637XX
16
27.94 (1.100)
19.81 (.780)
17.78 (.700)
501-2027XX
501-2037XX
20
33.02 (1.300)
24.89 (.980)
22.86 (.900)
501-2427XX
501-2437XX
24
38.10 (1.500)
29.97 (1.180)
27.94 (1.100)
501-2627XX
501-2637XX
26
40.64 (1.600)
32.51 (1.280)
30.48 (1.200)
501-3027XX
501-3037XX
30
45.72 (1.800)
37.59 (1.480)
35.56 (1.400)
501-3427XX
501-3437XX
34
50.80 (2.000)
42.67 (1.680)
40.64 (1.600)
501-3627XX
501-3637XX
36
53.34 (2.100)
45.21 (1.780)
43.18 (1.700)
501-4027XX
501-4037XX
40
58.42 (2.300)
50.29 (1.980)
48.26 (1.900)
501-4427XX
501-4437XX
44
63.50 (2.500)
55.37 (2.180)
53.34 (2.100)
501-5027XX
501-5037XX
50
71.12 (2.800)
62.99 (2.480)
60.96 (2.400)
501-6027XX
501-6037XX
60
83.82 (3.300)
75.69 (2.980)
73.66 (2.900)
501-6427XX
501-6437XX
64
88.90 (3.500)
80.77 (3.180)
78.74 (3.100)
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
30
IDC Systems
Headers
LOW PROFILE
HEADERS WITH VERTICAL
RETAINER/EJECTOR
LATCHES, RIGHT ANGLE PINS
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating
.025 Sq. pin w/coined edges
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
ACCESSORIES
POLARIZING KEY: See page 46
501 - XX XX
# of Positions
Tail Style
R (PCB Retention)
E (Ejector)
ES Ejector for Strain Relief
Ordering Information
CATALOG NUMBERS
DIMENSION “D” IN MM (INCHES)
2.59 (.102)
4.19 (.165)
FOR 1.57 (.062)
FOR 3.18 (.125)
P.C. BOARDS
P.C. BOARDS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
501-0607XX
501-0617XX
6
15.24 (.600)
7.11 (.280)
5.08 (.200)
501-1007XX
501-1017XX
10
20.32 (.800)
12.19 (.480)
10.16 (.400)
501-1207XX
501-1217XX
12
22.86 (.900)
14.73 (.580)
12.70 (.500)
501-1407XX
501-1417XX
14
25.40 (1.000)
17.27 (.680)
15.24 (.600)
501-1607XX
501-1617XX
16
27.94 (1.100)
19.81 (.780)
17.78 (.700)
501-2007XX
501-2017XX
20
33.02 (1.300)
24.89 (.980)
22.86 (.900)
501-2407XX
501-2417XX
24
38.10 (1.500)
29.97 (1.180)
27.94 (1.100)
501-2607XX
501-2617XX
26
40.64 (1.600)
32.51 (1.280)
30.48 (1.200)
501-3007XX
501-3017XX
30
45.72 (1.800)
37.59 (1.480)
35.56 (1.400)
501-3407XX
501-3417XX
34
50.80 (2.000)
42.67 (1.680)
40.64 (1.600)
501-3607XX
501-3617XX
36
53.34 (2.100)
45.21 (1.780)
43.18 (1.700)
501-4007XX
501-4017XX
40
58.42 (2.300)
50.29 (1.980)
48.26 (1.900)
501-4407XX
501-4417XX
44
63.50 (2.500)
55.37 (2.180)
53.34 (2.100)
501-5007XX
501-5017XX
50
71.12 (2.800)
62.99 (2.480)
60.96 (2.400)
501-6007XX
501-6017XX
60
83.82 (3.300)
75.69 (2.980)
73.66 (2.900)
501-6407XX
501-6417XX
64
88.90 (3.500)
80.77 (3.180)
78.74 (3.100)
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
31
IDC Systems
Headers
LOW PROFILE BOX HEADERS
STRAIGHT PINS
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel
plating
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
HOLE DIA. ±.08 (±.003)
AFTER PLATING
TYPE OF CONTACT
.89 (.035)
PCB Solder Tails
1.14 (.045)
Wrap Post Tails
Ordering Information
CATALOG NUMBERS
DIMENSION “D” IN MM (INCHES)
2.59 (.102)
4.19 (.165)
15.49 (.610)
FOR 1.57 (.062) FOR 3.18 (.125)
WRAP POST
P.C. BOARDS
P.C. BOARDS
TAILS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
5.80 (.200)
609-0627
609-0637
609-0657
6
15.24 (600)
12.70 (.500)
609-0827
609-0837
609-0857
8
17.78 (.700)
15.24 (.600)
7.62 (.300)
609-1027
609-1037
609-1057
10
20.32 (.800)
17.78 (.700)
10.16 (.400)
609-1227
609-1237
609-1257
12
22.86 (.900)
20.32 (.800)
17.70 (.500)
609-1427
609-1437
609-1457
14
25.40 (1.000)
22.86 (.900)
15.24 (.600)
609-1627
609-1637
609-1657
16
27.94 (1.100)
25.40 (1.000)
17.75 (. 700)
609-2027
609-2037
609-2057
20
33.02 (1.300)
30.48 (1.200)
22.86 (.900)
609-2427
609-2437
609-2457
24
38.10 (1.500)
35.56 (1.400)
27.94 (1.100)
609-2627
609-2637
609-2657
26
40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
609-3027
609-3037
609-3057
30
45.72 (1.800)
43.18 (1.700)
35.56 (1.400)
609-3427
609-3437
609-3457
34
50.80 (2.000)
48.26 (1.900)
40.64 (1.600)
609-3627
609-3637
609-3657
36
53.34 (2.100)
50.80 (2.000)
43.18 (1.700)
609-4027
609-4037
609-4057
40
58.42 (2.300)
55.88 (2.200)
48.26 (1.900)
609-4427
609-4437
609-4457
44
63.50 (2.500)
60.96 (2.400)
53.34 (2.100)
609-5027
609-5037
609-5057
50
71.12 (2.800)
68.58 (2.700)
60.96 (2.400)
609-5627
609-5637
609-5657
56
78.74 (3.100)
76.20 (3.000)
68.58 (2.700)
609-6027
609-6037
609-6057
60
83.82 (3.300)
81.28 (3.200)
73.66 (2.900)
609-6427
609-6437
609-6457
64
88.90 (3.500)
86.36 (3.400)
78.74 (3.100)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
32
IDC Systems
Headers
LOW PROFILE BOX HEADERS
RIGHT ANGLE PINS
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel
plating
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C To 125°C
APPLICATION REFLOW TEMPERATURE RATING: -55˚C To
125°C
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
HOLE DIA. ±.08 (±.003)
AFTER PLATING
TYPE OF CONTACT
.89 (.035)
PCB Solder Tails
1.14 (.045)
Wrap Post Tails
Ordering Information
CATALOG NUMBERS
DIMENSION “D” IN MM (INCHES)
2.59 (.102)
4.19 (.165)
15.49 (.610)
FOR 1.57 (.062) FOR 3.18 (.125)
WRAP POST
P.C. BOARDS
P.C. BOARDS
TAILS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
6
15.24 (600)
12.70 (.500)
5.80 (.200)
609-0607
609-0617
609-0647
609-0807
609-0817
609-0847
8
17.78 (.700)
15.24 (.600)
7.62 (.300)
609-1007
609-1017
609-1047
10
20.32 (.800)
17.78 (.700)
10.16 (.400)
609-1207
609-1217
609-1247
12
22.86 (.900)
20.32 (.800)
17.70 (.500)
609-1407
609-1417
609-1447
14
25.40 (1.000)
22.86 (.900)
15.24 (.600)
609-1607
609-1617
609-1647
16
27.94 (1.100)
25.40 (1.000)
17.75 (. 700)
609-2007
609-2017
609-2047
20
33.02 (1.300)
30.48 (1.200)
22.86 (.900)
609-2407
609-2417
609-2447
24
38.10 (1.500)
35.56 (1.400)
27.94 (1.100)
609-2607
609-2617
609-2647
26
40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
609-3007
609-3017
609-3047
30
45.72 (1.800)
43.18 (1.700)
35.56 (1.400)
609-3407
609-3417
609-3447
34
50.80 (2.000)
48.26 (1.900)
40.64 (1.600)
609-3607
609-3617
609-3647
36
53.34 (2.100)
50.80 (2.000)
43.18 (1.700)
609-4007
609-4017
609-4047
40
58.42 (2.300)
55.88 (2.200)
48.26 (1.900)
609-4407
609-4417
609-4447
44
63.50 (2.500)
60.96 (2.400)
53.34 (2.100)
609-5007
609-5017
609-5047
50
71.12 (2.800)
68.58 (2.700)
60.96 (2.400)
609-5607
609-5617
609-5647
56
78.74 (3.100)
76.20 (3.000)
68.58 (2.700)
609-6007
609-6017
609-6047
60
83.82 (3.300)
81.28 (3.200)
73.66 (2.900)
609-6407
609-6417
609-6447
64
88.90 (3.500)
86.36 (3.400)
78.74 (3.100)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
33
IDC Systems
Headers
HIGH TEMPERATURE
LOW PROFILE HEADERS
STRAIGHT PINS
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, infrared & vapor phase process
compatible.
COLOR: Black
CONTACT MATERIAL: Brass with 15µ inches min.
gold over 50µ inches min. nickel plating
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C To 125°C
SOLDER REFLOW TEMPERATURE RATING: 190˚C To 245°C
(275° for 30 sec., depending on reflow profile)
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
.040±.003 After Plating
Ordering Information
CATALOG NUMBERS
DIMENSION “D” IN MM (INCHES)
2.90 (.114)
4.19 (.165)
FOR 1.57 (.062) FOR 3.18 (.125)
P.C. BOARDS
P.C. BOARDS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
10.16 (.400)
636-1027
636-1037
10
20.32 (.800)
17.78 (.700)
636-1427
636-1437
14
25.40 (1.000)
22.86 (.900)
15.24 (.600)
636-1627
636-1637
16
27.94 (1.100)
25.40 (1.000)
17.75 (. 700)
636-2027
636-2037
20
33.02 (1.300)
30.48 (1.200)
22.86 (.900)
636-2627
636-2637
26
40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
636-3427
636-3437
34
50.80 (2.000)
48.26 (1.900)
40.64 (1.600)
636-4027
636-4037
40
58.42 (2.300)
55.88 (2.200)
48.26 (1.900)
636-5027
636-5037
50
71.12 (2.800)
68.58 (2.700)
60.96 (2.400)
636-6027
636-6037
60
83.82 (3.300)
81.28 (3.200)
73.66 (2.900)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
34
IDC Systems
Headers
HIGH TEMPERATURE
LOW PROFILE HEADERS
RIGHT ANGLE PINS
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, infrared & vapor phase process
compatible.
COLOR: Black
CONTACT MATERIAL: Brass with 15µ inches min.
gold over 50µ inches min. nickel plating
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
SOLDER REFLOW TEMPERATURE RATING: 190˚C To 245°C
(275° for 30 sec., depending on reflow profile)
MATING CONNECTORS
FEMALE SOCKETS: See pages 9-13
.040±.003 After Plating
Ordering Information
CATALOG NUMBERS
DIMENSION “D” IN MM (INCHES)
2.90 (.114)
4.19 (.165)
FOR 1.57 (.062) FOR 3.18 (.125)
P.C. BOARDS
P.C. BOARDS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
636-1007
636-1017
10
20.32 (.800)
17.78 (.700)
10.16 (.400)
636-1407
636-1417
14
25.40 (1.000)
22.86 (.900)
15.24 (.600)
636-1607
636-1617
16
27.94 (1.100)
25.40 (1.000)
17.75 (. 700)
636-2007
636-2017
20
33.02 (1.300)
30.48 (1.200)
22.86 (.900)
636-2607
636-2617
26
40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
636-3407
636-3417
34
50.80 (2.000)
48.26 (1.900)
40.64 (1.600)
636-4007
636-4017
40
58.42 (2.300)
55.88 (2.200)
48.26 (1.900)
636-5007
636-5017
50
71.12 (2.800)
68.58 (2.700)
60.96 (2.400)
636-6007
636-6017
60
83.82 (3.300)
81.28 (3.200)
73.66 (2.900)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
35
IDC Systems
Headers
LOW PROFILE HEADERS
STRAIGHT PINS WITH
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE
SOCKETS :
See pages 9-13
609 - XX XX
# of Positions
Tail Style
HOLE DIA.
±.08 (±.003)
AFTER PLATING
TYPE OF CONTACT
.89 (.035)
PCB Solder Tails
1.14 (.045)
Wrap Post Tails
R (PCB Retention)
E (Ejector)
ES Ejector for Strain Relief
Ordering Information
CATALOG NUMBERS
DIMENSIONS “D” IN MM (INCHES)
2.59 (.102)
4.19 (.165)
15.49 (.610)
FOR 1.57 (.062) FOR 3.18 (.125)
WRAP POST
P.C. BOARDS
P.C. BOARDS
TAILS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
609-0827XX 609-0837XX
609-0857XX
8
29.21 (1.150)
15.24 (.600)
7.26 (.300)
609-1027XX 609-1037XX
609-1057XX
10
31.75 (1.250)
17.78 (.700)
10.16 (.400)
609-1227XX 609-1237XX
609-1257XX
12
34.29 (1.350)
20.32 (.800)
17.70 (.500)
609-1427XX 609-1437XX
609-1457XX
14
36.83 (1.450)
22.86 (.900)
15.24 (.600)
609-1627XX 609-1637XX
609-1657XX
16
39.37 (1.550)
25.40 (1.000)
17.78 (. 700)
609-2027XX 609-2037XX
609-2057XX
20
44.45 (1.750)
30.48 (1.200)
22.86 (.900)
609-2427XX 609-2437XX
609-2457XX
24
49.53 (1.950)
35.55 (1.400)
27.94 (1.100)
609-2627XX 609-2637XX
609-2657XX
26
52.07 (2.050) 38.10 (1.5001 30.48 (1.2001
609-3027XX 609-3037XX
609-3057XX
30
57.15 (2.250)
43.18 (1.700)
35.56 (1.400)
609-3427XX 609-3437XX
609-3457XX
34
62.23 (2.450)
48.26 (1.900)
40.64 (1.600)
609-3627XX 609-3637XX
609-3657XX
36
64.77 (2.550)
50.80 (2.000) 43.18 (1 .700)
609-4027XX 609-4037XX
609-4057XX
40
69.85 (2.750)
55.88 (2.200)
48.26 (1.900)
609-4427XX 609-4437XX
609-4457XX
44
74.93 (2.950)
60.96 (2.400)
53.34 (2.100)
609-5027XX 609-5037XX
609-5057XX
50
82.55 (3.250)
68.58 (2.700)
60.96 (2.400)
609-5627XX 609-5637XX
609-5657XX
56
90.17 (3.550)
76.20 (3.000)
68.58 (2.700)
609-6027XX 609-6037XX
609-6057XX
60
95.25 (3.750)
81.28 (3.200)
73.66 (2.900)
609-6427XX 609-6437XX
609-6457XX
64
100.33 (3.950) 86.36 (3.400)
78.74 (3.100)
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
36
IDC Systems
Headers
LOW PROFILE HEADERS
RIGHT ANGLE PINS WITH
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE
SOCKETS :
See pages 9-13
609 - XX XX
R (PCB Retention)
# of Positions
Tail Style E (Ejector)
ES Ejector for Strain Relief
Ordering Information
HOLE DIA.
±.08 (±.003)
AFTER PLATING
TYPE OF CONTACT
.89 (.035)
PCB Solder Tails
1.14 (.045)
Wrap Post Tails
CATALOG NUMBERS
DIMENSIONS “D” IN MM (INCHES)
2.59 (.102)
4.19 (.165)
15.49 (.610)
1.57 (.062)
3.18 (.125)
WRAP POST
P.C. BOARDS
P.C. BOARDS
TAILS
DIMENSIONS IN MM (INCHES)
NO.
OF
POS.
A
B
C
609-0807XX
609-0817XX
609-0847XX
8
29.21 (1.150)
15.24 (.600)
7.26 (.300)
609-1007XX
609-1017XX
609-1047XX
10
31.75 (1.250)
17.78 (.700)
10.16 (.400)
609-1207XX
609-1217XX
609-1247XX
12
34.29 (1.350)
20.32 (.800)
17.70 (.500)
609-1407XX
609-1417XX
609-1447XX
14
36.83 (1.450)
22.86 (.900)
15.24 (.600)
609-1607XX
609-1617XX
609-1647XX
16
39.37 (1.550)
25.40 (1.000)
17.78 (. 700)
609-2007XX
609-2017XX
609-2047XX
20
44.45 (1.750)
30.48 (1.200)
22.86 (.900)
609-2407XX
609-2417XX
609-2447XX
24
49.53 (1.950)
35.55 (1.400)
27.94 (1.100)
609-2607XX
609-2617XX
609-2647XX
26
52.07 (2.050)
38.10 (1.500)
30.48 (1.200)
609-3007XX
609-3017XX
609-3047XX
30
57.15 (2.250)
43.18 (1.700)
35.56 (1.400)
609-3407XX
609-3417XX
609-3447XX
34
62.23 (2.450)
48.26 (1.900)
40.64 (1.600)
609-3607XX
609-3617XX
609-3647XX
36
64.77 (2.550)
50.80 (2.000) 43.18 (1 .700)
609-4007XX
609-4017XX
609-4047XX
40
69.85 (2.750)
55.88 (2.200)
48.26 (1.900)
609-4407XX
609-4417XX
609-4447XX
44
74.93 (2.950)
60.96 (2.400)
53.34 (2.100)
609-5007XX
609-5017XX
609-5047XX
50
82.55 (3.250)
68.58 (2.700)
60.96 (2.400)
609-5607XX
609-5617XX
609-5647XX
56
90.17 (3.550)
76.20 (3.000)
68.58 (2.700)
609-6007XX
609-6017XX
609-6047XX
60
95.25 (3.750)
81.28 (3.200)
73.66 (2.900)
609-6407XX
609-6417XX
609-6447XX
64
100.33 (3.950) 86.36 (3.400)
78.74 (3.100)
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
37
IDC Systems
Headers
FLEX-FIT™ COMPLIANT
CONTACT HEADERS WITH
RETAINER/EJECTOR
OPTIONS
.100" x .100" CENTERS
LR92984
E60980
STYLE 1 CAT # 609-0004E
LATCH USED W/O STRAIN RELIEF
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
PCB THICKNESS ACCOMODATED: .062" - .125"
ELECTRICAL PROPERTIES
STYLE 2 CAT # 609-0004ES
LATCH USED WITH STRAIN RELIEF
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE
SOCKETS :
See pages 9-13
APPLICATION TOOLING
889-H7XX (XX = # positions)
HOLE DIA. ±.08 (±.003)
AFTER PLATING
TYPE OF CONTACT
1.02 (.040)
• Press fit with or without ejector latches in place.
• Ejector/latches can be post mounted.
Flex-Fit™
Ordering Information
STANDARD
W/O EJECTOR
WITH STYLE 1
EJECTOR
WITH STYLE 2
EJECTOR
NO.
OF POS.
A
B
609-10400-2
609-10410-2
609-10420-2
10
32.00 (1.260)
17.53 (.690)
10.16 (.400)
27.94 (1.100)
609-14400-2
609-14410-2
609-14420-2
14
37.08 (1.460)
22.61 (.890)
15.24 (.600)
33.02 (1.300)
609-16400-2
609-16410-2
609-16420-2
16
39.62 (1.560)
25.15 (.990)
17.78 (.700)
35.56 (1.440)
609-20400-2
609-20410-2
609-20420-2
20
44.70 (1.760)
30.23 (1.190)
22.86 (.900)
40.64 (1.600)
609-26400-2
609-26410-2
609-26420-2
26
52.32 (2.060)
37.85 (1.490)
30.48 (1.200)
48.26 (1.900)
609-34400-2
609-34410-2
609-34420-2
34
62.48 (2.460)
48.01 (1.890)
40.64 (1.600)
58.42 (2.300)
609-40400-2
609-40410-2
609-40420-2
40
70.10 (2.760)
55.63 (2.190)
48.26 (1.900)
66.04 (2.600)
609-50400-2
609-50410-2
609-50420-2
50
82.80 (3.260)
68.33 (2.690)
60.96 (2.400)
78.74 (3.100)
609-60400-2
609-60410-2
609-60420-2
60
95.50 (3.760)
81.03 (3.190)
73.66 (2.900)
91.44 (3.600)
609-64400-2 609-64410-2
609-64420-2
*Latching Ears can be ordered separately.
64
100.58 (3.960) 86.11 (3.390)
78.74 (3.100)
96.52 (3.800)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
DIMENSIONS IN MM (INCHES)
C
D
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
38
IDC Systems
Headers
LOW-PROFILE
FLEX-FIT™ COMPLIANT
CONTACT HEADERS
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Blue
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
PCB THICKNESS ACCOMODATED: .062" - .125"
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: >1000 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE
SOCKETS :
See pages 9-13
APPLICATION TOOLING
889-H7XX
(XX = # positions)
HOLE DIA. ±.08 (±.003)
AFTER PLATING
TYPE OF CONTACT
1.02 (.040)
Flex-Fit™
Ordering Information
STANDARD
W/O EJECTORS
WITH “E”
EJECTOR
WITH “ES”
EJECTOR
NO.
OF POS.
A
DIMENSIONS IN MM (INCHES)
A
W/EJECTOR
W/O EJECTOR
609-10700-2
609-10710-2
609-10720-2
10
20.32 (0.800)
609-14700-2
609-14710-2
609-14720-2
14
609-16700-2
609-16710-2
609-16720-2
609-20700-2
609-20710-2
609-20720-2
609-24700-2
609-24710-2
609-26700-2
609-26710-2
609-34700-2
B
C
31.75 (1.250)
17.78 (.700)
10.16 (0.400)
25.40 (1.000)
36.83 (1.450)
22.86 (0.900)
15.24 (0.600)
16
27.94 (1.100)
39.37 (1.550)
25.40 (1.000)
17.78 (0.700)
20
33.02 (1.300)
44.45 (1.750)
30.48 (1.200)
22.86 (0.900)
609-24720-2
24
38.10 (1.500)
49.53 (1.950)
35.56 (1.400)
27.94 (1.100)
609-26720-2
26
40.64 (1.600)
52.07 (2.050)
38.10 (1.500)
30.48 (1.200)
609-34710-2
609-34720-2
34
50.80 (2.000)
62.23 (2.450)
48.26 (1.900)
40.64 (1.600)
609-36700-2
609-36710-2
609-36720-2
36
53.34 (2.100)
64.77 (2.550)
50.80 (2.000)
46.18 (1.700)
609-40700-2
609-40710-2
609-40720-2
40
58.42 (2.300)
69.85 (2.750)
55.88 (2.200)
48.26 (1.900)
609-44700-2
609-44710-2
609-44720-2
44
63.50 (2.500)
74.93 (2.950)
60.95 (2.400)
53.34 (2.100)
609-50700-2
609-50710-2
609-50720-2
50
71.12 (2.800)
82.55 (3.250)
68.58 (2.700)
60.96 (2.400)
609-56700-2
609-56710-2
609-56720-2
56
78.74 (3.100)
90.17 (3.550)
76.20 (3.000)
68.58 (2.700)
609-60700-2
609-60710-2
609-60720-2
60
83.82 (3.300)
95.25 (3.750)
81.28 (3.200)
73.66 (2.900)
609-64700-2
609-64710-2
609-64720-2
64
88.90 (3.500)
100.33 (3.950)
86.36 (3.400)
78.74 (3.100)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
39
IDC Systems
Headers
SURFACE MOUNT LOW
PROFILE PCB HEADER
.100" x .100" CENTERS
LR92984
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, infrared & vapor phase process
compatible.
COLOR: Black
CONTACT MATERIAL: Phosphor bronze with 30µ
inches min. gold over nickel in termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC
DIELECTRIC STRENGTH: > 500 VRMS @ sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE
SOCKETS :
See pages 9-13
ACCESSORIES
POLARIZING KEY: See page 46
* Use xxxx xxx for mounting hole options.
Ordering Information
CATALOG NO.
NUMBERS* OF POS.
A
DIMENSIONS IN MM (INCHES)
B
C
D
SMH-06*
6
26.67 (1.050)
12.80 (.504)
5.08 (.200)
22.61 (.890)
SMH-08*
8
29.21 (1.150)
15.34 (.604)
7.62 (.300)
25.15 (.990)
SMH-10*
10
31.75 (1.250)
17.88 (.704)
10.16 (.400) 27.69 (1.090)
SMH-12*
12
34.29 (1.350)
20.42 (.804)
12.70 (.500) 30.23 (1.190)
SMH-14*
14
36.83 (1.450)
22.96 (.904)
15.24 (.600) 32.77 (1.290)
SMH-16*
16
39.37 (1.550) 25.50 (1.004)
17.78 (.700) 35.31 (1.390)
SMH-20*
20
44.45 (1.750) 30.58 (1.204)
22.86 (.900) 40.39 (1.590)
SMH-24*
24
49.53 (1.950) 35.66 (1.404) 27.94 (1.100) 45.47 (1.790)
SMH-26*
26
52.07 (2.050) 38.20 (1.504) 30.48 (1200) 48.00 (1.890)
SMH-30*
30
57.15 (2.250) 43.28 (1.704) 35.56 (1.400) 53.09 (2.090)
SMH-34*
34
62.23 (2.450) 48.36 (1.904) 40.64 (1.600) 58.17 (2.290)
SMH-40*
40
69.85 (2.750) 55.98 (2.204) 48.26 (1.900) 65.79 (2.590)
SMH-44*
44
74.93 (2.950) 61.06 (2.404) 53.34 (2.100) 70.87 (2.790)
SMH-50*
50
82.55 (3.250) 68.68 (2.704) 60.96 (2.400) 78.49 (3.090)
SMH-56*
56
90.17 (3.550) 76.30 (3.004) 68.58 (2.700) 86.11 (3.390)
SMH-60*
60
95.25 (3.750) 81.38 (3.204) 73.66 (2.900) 91.19 (3.590)
SMH-64*
64
100.33 (3.950) 86.46 (3.404) 78.74 (3.100) 96.27 (3.790)
SMH-XX Y 7 Z-2
SMH-T&B Series
Number of Positions
Mounted Style
2 – Mounting Hole
3 – Mounting Post
Plating Code
2 – 30 Microinches Gold
0 – No Ejector/Retainer
1 – Ejector/Retainer for use
without Strain Relief
2 – Ejector/Retainer for use
with Strain Relief
7-Low Profile
* See part number matrix for complete product number
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
40
IDC Systems
Headers
SINGLE ROW PIN STRIP
HEADERS (STRAIGHT)
.100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass reinforced thermoplastic,
rated 94V-0
COLOR: Black
OXYGEN INDEX: 32
CONTACT MATERIAL: Copper alloy, gold or tin/lead
plating over nickel
W
INTERFACE PLATING
ELECTRICAL PROPERTIES
G
10 µ" gold over nickel
CURRENT RATING: 3 Amps/pin
INSULATION RESISTANCE: >1 x 109 Ohms
DIELECTRIC STRENGTH: >1000 VAC
H
30µ" gold over nickel
T 100µ" tin/lead over nickel
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C to 125˚C
Ordering Information
NUMBER OF CATALOG NO.
POSITIONS
SPECIFY W, X
A
B
1
PS-01SS-WXA
—
2.54 (.100)
2
PS-02SS-WXA
2.54 (.100)
5.01 (.200)
3
PS-03SS-WXA
5.08 (.200)
7.62 (.300)
4
PS-04SS-WXA
7.62 (.300)
10.16 (.400)
5
PS-05SS-WXA
10.16 (.400)
12.70 (.500)
6
PS-06SS-WXA
12.70 (.500)
15.24 (.600)
X
MATING LENGTH
A
8.1 (.318)
7
PS-07SS-WXA
15.24 (.600)
17.78 (.700)
B
5.8 (.230)
8
PS-08SS-WXA
17.78 (.700)
20.32 (.800)
9
PS-09SS-WXA
20.32 (.800)
22.86 (.900)
10
PS-10SS-WXA
22.86 (.900)
25.40 (1.000)
11
PS-11SS-WXA 25.40 (1.000) 27.94 (1.100)
12
PS-12SS-WXA 27.94 (1.100) 30.48 (1.200)
13
PS-13SS-WXA 30.48 (1.200) 33.02 (1.300)
14
PS-14SS-WXA
15
PS-15SS-WXA 35.56 (1.400) 38.10 (1.500)
16
PS-16SS-WXA 38.10 (1.500) 40.64 (1.600)
17
PS-17SS-WXA 40.64 (1.600) 43.18 (1.700)
18
PS-18SS-WXA 43.18 (1.700) 45.72 (1.800)
19
PS-19SS-WXA 45.72 (1.800) 48.26 (1.900)
20
PS-20SS-WXA 48.26 (1.900) 50.80 (2.000)
21
PS-21SS-WXA 50.80 (2.000) 53.34 (2.100)
22
PS-22SS-WXA 53.34 (2.100) 55.88 (2.200)
23
PS-23SS-WXA 55.88 (2.200) 58.42 (2.300)
24
PS-24SS-WXA 58.4212.300) 60.96 (2.400)
25
PS-25SS-WXA 60.96 (2.400) 63.50 i2.500)
26
PS-26SS-WXA 63;50 (2.500) 66.04 (2.600)
27
PS-27SS-WXA 66.04 (2.600) 68.58 (2.700)
28
PS-28SS-WXA 68.58 (2.700) 71.12 (2.800)
29
PS-29SS-WXA 71.12 (2.800) 73.66 (2.900)
30
PS-30SS-WXA 73.66 (2.900) 76.20 (3.000)
31
PS-31SS-WXA 76.20 (3.000) 78.74 (3.100)
32
PS-32SS-WXA 78.74 (3.100) 81.28 (3.200)
33
PS-33SS-WXA 81.28 (3.2001 83.82 (3.300)
34
PS-34SS-WXA 83.82 (3.300) 86.36 (3.400)
35
PS-35SS-WXA 86.36 (3.400) 88.90 (3.500)
36
PS-36SS-WXA 88.90 (3.500) 91.44 (3.600)
37
PS-37SS-WXA 91.44 (3.600) 93.98 (3.700)
38
PS-38SS-WXA 93.98 (3.700) 96.52 (3.800)
39
PS-39SS-WXA 96.52 (3.800) 99.06 (3.900)
40
PS-40SS-WXA 99.06 (3.900) 101.6 (4.000)
33.02 (1300) 35.56 (1.400)
eg. PS-40SS-TBA
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
41
IDC Systems
Headers
SINGLE ROW PIN STRIP
HEADERS (RIGHT ANGLE)
.100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass reinforced thermoplastic,
rated 94V-0
COLOR: Black
OXYGEN INDEX: 32
CONTACT MATERIAL: Copper alloy, gold or tin/lead
plating over nickel
ELECTRICAL PROPERTIES
CURRENT RATING: 3 Amps/pin
Insulation Resistance >1 x 109 Ohms
Dielectric Strength >1000 VAC
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C to 125˚C
W
INTERFACE PLATING
G
10 µ" gold over nickel
H
30µ" gold over nickel
T 100µ" tin/lead over nickel
X
MATING LENGTH
A
8.1 (.318)
B
5.8 (.230)
2.9
(.114)
Ordering Information
NUMBER OF
CATALOG NO.
POSITIONS
SPECIFY W, X
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
PS-01SR-WXA
PS-02SR-WXA
PS-03SR-WXA
PS-04SR-WXA
PS-0SSR-WXA
PS-06SR-WXA
PS-07SR-WXA
PS-08SR-WXA
PS-09SR-WXA
PS-10SR-WXA
PS-11SR-WXA
PS-12SR-WXA
PS-13SR-WXA
PS-14SR-WXA
PS-15SR-WXA
PS-16SR-WXA
PS-17SR-WXA
PS-18SR-WXA
PS-19SR-WXA
PS-20SR-WXA
PS-21SR-WXA
PS-22SR-WXA
PS-23SR-WXA
PS-24SR-WXA
PS-25SR-WXA
PS-26SR-WXA
PS-27SR-WXA
PS-28SR-WXA
PS-29SR-WXA
PS-30SR-WXA
PS-31SR-WXA
PS-32SR-WXA
PS-33SR-WXA
PS-34SR-WXA
PS-35SR-WXA
PS-36SR-WXA
PS-37SR-WXA
PS-38SR-WXA
PS-39SR-WXA
PS-40SR-WXA
A
B
—
2.54 (.100)
5.08 (.200)
7.62 (.300)
10.16 (.400)
12.70 (.500)
15.24 (.600)
17.78 (.700)
20.32 (.800)
22.86 (.900)
25.40 (1.000)
27.94 (1.100)
30.48 (1.200)
33.02 (1300)
35.56 (1.400)
38.10 (1.500)
40.64 (1.600)
43.18 (1.700)
45.72 (1.800)
48.26 (1.900)
50.80 (2.000)
53.34 (2.100)
55.88 (2.200)
58.4212.300)
60.96 (2.400)
63;50 (2.500)
66.04 (2.600)
68.58 (2.700)
71.12 (2.800)
73.66 (2.900)
76.20 (3.000)
78.74 (3.100)
81.28 (3.2001
83.82 (3.300)
86.36 (3.400)
88.90 (3.500)
91.44 (3.600)
93.98 (3.700)
96.52 (3.800)
99.06 (3.900)
2.54 (.100)
5.01 (.200)
7.62 (.300)
10.16 (.400)
12.70 (.500)
15.24 (.600)
17.78 (.700)
20.32 (.800)
22.86 (.900)
25.40 (1.000)
27.94 (1.100)
30.48 (1.200)
33.02 (1.300)
35.56 (1.400)
38.10 (1.500)
40.64 (1.600)
43.18 (1.700)
45.72 (1.800)
48.26 (1.900)
50.80 (2.000)
53.34 (2.100)
55.88 (2.200)
58.42 (2.300)
60.96 (2.400)
63.50 i2.500)
66.04 (2.600)
68.58 (2.700)
71.12 (2.800)
73.66 (2.900)
76.20 (3.000)
78.74 (3.100)
81.28 (3.200)
83.82 (3.300)
86.36 (3.400)
88.90 (3.500)
91.44 (3.600)
93.98 (3.700)
96.52 (3.800)
99.06 (3.900)
101.6 (4.000)
eg. PS-40SR-TBA
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
42
IDC Systems
Headers
DUAL ROW
PIN STRIP HEADERS
STRAIGHT
.100" x .100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass reinforced thermoplastic, rated 94V-0
COLOR: Black
OXYGEN INDEX: 32
CONTACT MATERIAL: Copper alloy, gold or tin/lead
plating over nickel
ELECTRICAL PROPERTIES
CURRENT RATING: 3 Amps/pin
INSULATION RESISTANCE:> 1 x 109 Ohms
DIELECTRIC STRENGTH:> 1000 VAC
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C to 125˚C
Ordering Information
W
INTERFACE PLATING
G
10 µ" gold over nickel
H
30µ" gold over nickel
T 100µ" tin/lead over nickel
NUMBER OF CATALOG NO.
POSITIONS SPECIFY W, & X
A
B
2
PS-02DS-WXA
2.54 (1.00)
5.08 (.200)
4
PS-04DS-WXA
7.62 (.300)
10.16 (.400)
6
PS-06DS-WXA
12.70 (.500)
15.24 (600)
8
PS-08DS-WXA
17.78 (.700)
20.32 (.800)
MATING LENGTH
10
PS-10DS-WXA
22.86 (.900)
25.40 (1.000)
A
8.1 (.318)
12
PS-12DS-WXA
27.94 (1.100)
30.48 (1.200)
B
5.8 (.230)
X
14
PS-14DS-WXA
33.02 (1.300)
35.56 (1.400)
16
PS-16DS-WXA
38.10 (1.500)
40.64 (1.600)
18
PS-18DS-WXA
43.18 (1.700)
45.72 (1.800)
20
PS-20DS-WXA
48.26 (1.900)
50.80 (2.000)
22
PS-22DS-WXA
53.34 (2.100)
55.88 (2.200)
24
PS-24DS-WXA
58.42 (2.300)
60.96 (2.400)
26
PS-26DS-WXA
63.50 (2.500)
66.04 (2.600)
28
PS-28DS-WXA
68.58 (2.700)
71.12 (2.800)
30
PS-30DS-WXA
73.66 (2.900)
76.20 i3.000)
32
PS-32DS-WXA
78.74 (3.100)
81.28 (3.200)
34
PS-34DS-WXA
83.82 (3.300)
86.36 (3.400)
36
PS-36DS-WXA
88.90 (3.500)
91.44 (3.600)
38
PS-38DS-WXA
93.98 (3.700)
96.52 (3.800)
40
PS-40DS-WXA
99.06 (3.900)
101.60 (4.000)
42
PS-42DS-WXA
104.14 (4.100) 106.68 (4.200)
44
PS-44DS-WXA
109.22 (4.300) 111.76 (4.400)
46
PS-46DS-WXA
114.30 (4.500) 116.84 (4.600)
48
PS-48DS-WXA
119.38 (4.700) 121.92 (4.800)
50
PS-50DS-WXA
124.46 (4.900) 127.00 (5.000)
52
PS-52DS-WXA
129.54 (5.100) 132.08 (5.200)
54
PS-54DS-WXA
134.62 (5.300) 137.16 (5.400)
56
PS-56DS-WXA
139.70 (5.500) 142.24 (5.600)
58
PS-58DS-WXA
144.78 (5.700) 147.32 (5.800)
60
PS-60DS-WXA
149.86 (5.900) 152.40 (6.000)
62
PS-62DS-WXA
154.94 (6.100) 157.48 (6.200)
64
PS-64DS-WXA
160.02 (6.300) 162.56 (6.400)
66
PS-66DS-WXA
165.10 (6.500) 167.64 (6.600)
68
PS-68DS-WXA
170.18 (6.700) 172.72 (6.800)
70
PS-70DS-WXA
175.26 (6.900) 177.80 (7.000)
72
PS-72DS-WXA
180.34 (7.100) 182.88 (7.200)
74
PS-74DS-WXA
185.42 (7.300) 187.96 (7.400)
76
PS-76DS-WXA
190 50 (7.500) 193.04 (7.600)
78
PS-78DS-WXA
195.58 (7.700) 198.12 (7.800)
80
PS-80DS-WXA
200.66 (7.900) 203.20 (8.000)
eg. PS-80DS-TBA
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
43
IDC Systems
Headers
DUAL ROW
PIN STRIP HEADERS
RIGHT ANGLE
.100" x .100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass reinforced thermoplastic, rated 94V-0
COLOR: Black
OXYGEN INDEX: 32
CONTACT MATERIAL: Copper alloy, gold or tin/lead
plating over nickel
ELECTRICAL PROPERTIES
CURRENT RATING: 3 Amps/pin
INSULATION RESISTANCE:> 1 x 109 Ohms
DIELECTRIC STRENGTH:> 1000 VAC
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: –55˚C to 125˚C
Ordering Information
W
INTERFACE PLATING
G
10 µ" gold over nickel
H
30µ" gold over nickel
NUMBER OF CATALOG NO.
POSITIONS SPECIFY W, & X
T 100µ" tin/lead over nickel
X
MATING LENGTH
A
8.1 (.318)
B
5.8 (.230)
A
B
2
PS-02DR-WXA
2.54 (1.00)
5.08 (.200)
4
PS-04DR-WXA
7.62 (.300)
10.16 (.400)
6
PS-06DR-WXA
12.70 (.500)
15.24 (600)
8
PS-08DR-WXA
17.78 (.700)
20.32 (.800)
10
PS-10DR-WXA
22.86 (.900)
25.40 (1.000)
12
PS-12DR-WXA
27.94 (1.100)
30.48 (1.200)
14
PS-14DR-WXA
33.02 (1.300)
35.56 (1.400)
16
PS-16DR-WXA
38.10 (1.500)
40.64 (1.600)
18
PS-18DR-WXA
43.18 (1.700)
45.72 (1.800)
20
PS-20DR-WXA
48.26 (1.900)
50.80 (2.000)
22
PS-22DR-WXA
53.34 (2.100)
55.88 (2.200)
24
PS-24DR-WXA
58.42 (2.300)
60.96 (2.400)
26
PS-26DR-WXA
63.50 (2.500)
66.04 (2.600)
28
PS-28DR-WXA
68.58 (2.700)
71.12 (2.800)
30
PS-30DR-WXA
73.66 (2.900)
76.20 i3.000)
32
PS-32DR-WXA
78.74 (3.100)
81.28 (3.200)
34
PS-34DR-WXA
83.82 (3.300)
86.36 (3.400)
36
PS-36DR-WXA
88.90 (3.500)
91.44 (3.600)
38
PS-38DR-WXA
93.98 (3.700)
96.52 (3.800)
40
PS-40DR-WXA
99.06 (3.900)
101.60 (4.000)
42
PS-42DR-WXA
104.14 (4.100) 106.68 (4.200)
44
PS-44DR-WXA
109.22 (4.300) 111.76 (4.400)
46
PS-46DR-WXA
114.30 (4.500) 116.84 (4.600)
48
PS-48DR-WXA
119.38 (4.700) 121.92 (4.800)
50
PS-50DR-WXA
124.46 (4.900) 127.00 (5.000)
52
PS-52DR-WXA
129.54 (5.100) 132.08 (5.200)
54
PS-54DR-WXA
134.62 (5.300) 137.16 (5.400)
56
PS-56DR-WXA
139.70 (5.500) 142.24 (5.600)
58
PS-58DR-WXA
144.78 (5.700) 147.32 (5.800)
60
PS-60DR-WXA
149.86 (5.900) 152.40 (6.000)
62
PS-62DR-WXA
154.94 (6.100) 157.48 (6.200)
64
PS-64DR-WXA
160.02 (6.300) 162.56 (6.400)
66
PS-66DR-WXA
165.10 (6.500) 167.64 (6.600)
68
PS-68DR-WXA
170.18 (6.700) 172.72 (6.800)
70
PS-70DR-WXA
175.26 (6.900) 177.80 (7.000)
72
PS-72DR-WXA
180.34 (7.100) 182.88 (7.200)
74
PS-74DR-WXA
185.42 (7.300) 187.96 (7.400)
76
PS-76DR-WXA
190 50 (7.500) 193.04 (7.600)
78
PS-78DR-WXA
195.58 (7.700) 198.12 (7.800)
80
PS-80DR-WXA
200.66 (7.900) 203.20 (8.000)
eg. PS-80DR-TBA
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
44