NSC MNCLC505A-X High-speed, programmable-supply current, monolithic op amp Datasheet

MICROCIRCUIT DATA SHEET
Original Creation Date: 08/06/98
Last Update Date: 08/18/99
Last Major Revision Date: 08/06/98
MNCLC505A-X REV 0A0
HIGH-SPEED, PROGRAMMABLE-SUPPLY CURRENT, MONOLITHIC OP
AMP
General Description
The CLC505 is a monolithic, high-speed op amp with a unique combination of high
performance, low power consumption, and flexibility of operation. With a 10 to 1 range of
supply current programmability (not preset currents, but rather a continuous range
"programmed" with a single external resistor, (Rp), this amplifier can be used in a wide
variety of high-performance applications. Performance (typical) at any supply current is
exceptional.
Even at 10mW power consumption, the CLC505 provides performance far beyond other
monolithic op amps, many of which consume nearly 100 times as much power.
The CLC505's combination of high performance, low power consumption, and large signal
performance makes the CLC505 ideal for many demanding applications in which power
consumption must be minimized. Examples include a variety of remote site equipment such
as battery-powered test instrumentation and communications gear. Power is also critical
in applications requiring many channels, such as video switching matrices, ATE, and
phased-array radar systems.
Industry Part Number
NS Part Numbers
CLC505A
CLC505AJ-QML
Prime Die
VB1929B
Controlling Document
5962-9099301MPA
Processing
Subgrp Description
1
2
3
4
5
6
7
8A
8B
9
10
11
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
1
Static tests at
Static tests at
Static tests at
Dynamic tests at
Dynamic tests at
Dynamic tests at
Functional tests at
Functional tests at
Functional tests at
Switching tests at
Switching tests at
Switching tests at
Temp ( oC)
+25
+125
-55
+25
+125
-55
+25
+125
-55
+25
+125
-55
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Features
-
10mW power consumption with 50MHz BW
Single-resistor programming of supply current
3.4 mA Icc provides 100Mhz bandwidth and 14ns settling (0.05%)
Fast disable capability
0.04% differential gain at Icc = 3.4mA
0.06% differential phase at Icc = 3.4mA
Applications
-
Low-power/battery applications
Remote site instrumentation
Mobile communications gear
Video switching matrix
Phased-array radar
2
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (Vs)
+7V dc
Output Current (Iout)
70mA
Common Mode Input Voltage (Vcm)
+7V dc
Differential Input Voltage (Vid)
10V dc
Power Dissipation (Pd)
(Note 2)
1.2W
Junction Temperature
+175 C
Storage Temperature Range
-65 C to +150 C
Lead Temperature (soldering, 10 seconds)
+300 C
Thermal Resistance
Junction-to-ambient (ThetaJA)
Ceramic DIP
(Still Air)
(500 LFPM)
Junction-to-case (ThetaJC)
Ceramic DIP
Package Weight
(Typical)
CERAMIC DIP
ESD Tolerance
(Note 3)
TBD
TBD
TBD
TBD
2000V
Note 1:
Note 2:
Note 3:
Absolute Maximum Ratings are limits beyond which damage to the device may occur.
Operating Ratings are conditions for which the device is functional, but do not
guarantee specific performance limits. For guaranteed specifications and test
conditions see the Electrical Characteristics. The guaranteed specifications apply
only for the test conditions listed. Some performance characteristics may degrade
when the device is not operated under the listed test conditions.
The maximum power dissipation must be derated at elevated temperatures and is
dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to
ambient thermal resistance), and TA (ambient temperature). The maximum allowable
power dissipation at any temperature is Pdmax = (Tjmax - TA) /ThetaJA or the number
given in the Absolute Maximum Ratings, whichever is lower.
Human body model, 100pF discharged through 1.5k Ohms.
3
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Recommended Operating Conditions
Supply Voltage (Vs)
+5V dc
Gain Range (Av)
+2 to +21 and -1 to -20
Ambient Operating Temperature Range (Ta)
-55 C to +125 C
4
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
+Iin
PARAMETER
Input Bias
Current
(noninverting)
CONDITIONS
NOTES
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
-Iin
Input Bias
Current
(inverting)
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Vio
Input Offset
Voltage
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms,
Rs = 50Ohms
Icc = 3.4mA, Rp = 100kOhms,
500Ohms, Rs = 50Ohms
5
UNIT
SUBGROUPS
+18
uA
1, 2
1
-36
+36
uA
3
-6
+6
uA
1, 2
-12
+12
uA
3
1
-2.5
+2.5
uA
1
1
-3.0
+3.0
uA
2
1
-5
+5
uA
3
1
-38
+38
uA
1
1
-40
+40
uA
2
1
-60
+60
uA
3
-14
+14
uA
1
-15
+15
uA
2
-22
+22
uA
3
1
-7
+7
uA
1
1
-11
+11
uA
2
1
-10
+10
uA
3
1
-8.0
+8.0
mV
1
1
-14.0
+14.0
mV
2
1
-12.8
+12.8
mV
3
-7.0
+7.0
mV
1
-13.0
+13.0
mV
2
-11.8
+11.8
mV
3
1
-7.0
+7.0
mV
1
1
-14.5
+14.5
mV
2
1
-13.0
+13.0
mV
3
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms,
Rs = 50Ohms
MAX
-18
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
MIN
1
Icc = 3.4mA, Rp = 100kOhms,
Rl = 500Ohms
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
PINNAME
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
Tc (+Iin)
PARAMETER
Average +Input
Bias Current
Drift
CONDITIONS
NOTES
MAX
1
-100
+100
nA/C 2
1
-225
+225
nA/C 3
1
-50
+50
nA/C 2
1
-75
+75
nA/C 3
1
-30
+30
nA/C 2
1
-32
+32
nA/C 3
1
-125
+125
nA/C 2
1
-275
+275
nA/C 3
1
-60
+60
nA/C 2
1
-100
+100
nA/C 3
1
-35
+35
nA/C 2
1
-38
+38
nA/C 3
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
1
-50
+50
uV/C 2, 3
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
1
-60
+60
uV/C 2, 3
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
1
-75
+75
uV/C 2, 3
Rp = 33kOhms, no load
1
11
mA
1, 3
1
12
mA
2
3.8
mA
1, 3
4.2
mA
2
1
1.3
mA
1
1
1.4
mA
2, 3
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
Average -Input
Bias Current
Drift
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
Tc (Vio)
Icc
Average Offset
Voltage Drift
Supply Current
Rl =
Rp = 100kOhms, no load
Rp = 300kOhms, no load
PSRR
Power Supply
Rejection Ratio
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms,
-V=-4.5V to -5.0V, +V=+4.5V to +5.0V
UNIT
SUBGROUPS
MIN
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Tc (-Iin)
PINNAME
1
48
dB
1
1
45
dB
2, 3
Icc = 3.4mA, Rp = 100kOhms, Rl =
500Ohms, -V=-4.5V to -5.0V, +V=+4.5V
to +5.0V
2
48
dB
1
2
45
dB
2, 3
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms,
-V=-4.5V to -5.0V, +V=+4.5V to +5.0V
1
48
dB
1
1
45
dB
2, 3
6
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
CMRR
PARAMETER
Common Mode
Rejection Ratio
CONDITIONS
NOTES
Icc = 9mA, Vcm = +1V, Rp = 33kOhms, Rl
= 250Ohms
Icc = 3.4mA, Vcm = +1V, Rp = 100kOhms,
Rl = 500Ohms
Icc = 1mA, Vcm = +1V, Rp = 300kOhms,
Rl = 1kOhms
+Rin
Input Resistance
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
Rout
Output Impedance
at dc
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
MAX
UNIT
SUBGROUPS
1
48
dB
4
1
45
dB
5, 6
1
48
dB
4
1
45
dB
5, 6
1
48
dB
4
1
45
dB
5, 6
1
800
kOhms 1
1
1600
kOhms 2
1
400
kOhms 3
1
2
MOhms 1
1
4
MOhms 2
1
1
MOhms 3
1
5
MOhms 1
1
10
MOhms 2
1
2.5
MOhms 3
0.3
Ohms 1
1
0.2
Ohms 2
1
1.2
Ohms 3
1
0.5
Ohms 1
1
0.2
Ohms 2
1
1.6
Ohms 3
1
1.0
Ohms 1
1
0.5
Ohms 2
1
3.0
Ohms 3
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms,
Ta = +25 C
1
2
pF
4
Icc = 3.4mA, Rp = 100kOhms,
500Ohms, Ta = +25 C
1
2
pF
4
1
2
pF
4
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
Input Capacitance
MIN
1
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Cin
PINNAME
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms,
Ta = +25 C
7
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
Vout
PARAMETER
Output Voltage
Swing
CONDITIONS
NOTES
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
Iout
Output Current
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
CMIR
Common Mode Input
Voltage Range
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms
Icc = 3.4mA, Rp = 100kOhms,
500Ohms
Rl =
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms
8
PINNAME
MIN
MAX
UNIT
SUBGROUPS
1
2.7
V
4, 5
1
2.5
V
6
2
2.7
V
4, 5
2
2.5
V
6
1
2.5
V
4, 5
1
1.2
V
6
1
36
mA
1
1
36
mA
2
1
18
mA
3
1
18
mA
1
1
18
mA
2
1
9
mA
3
1
5
mA
1
1
5
mA
2
1
2.5
mA
3
1
-1.8
+1.8
V
1
1
-2.0
+2.0
V
2
1
-1.5
+1.5
V
3
1
-1.8
+1.8
V
1
1
-2.0
+2.0
V
2
1
-1.5
+1.5
V
3
1
-1.8
+1.8
V
1
1
-2.0
+2.0
V
2
1
-1.5
+1.5
V
3
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
SSBW
PARAMETER
Small Signal
Bandwidth
CONDITIONS
NOTES
-3dB bandwidth, Vout < 2Vpp, Icc =
9mA, Rp = 33kOhms, Rl = 250Ohms
LSBW
Large Signal
Bandwidth
-3dB bandwidth, Vout < 5Vpp, Icc =
9mA, Rp = 33kOhms, Rl = 250Ohms
-3dB bandwidth, Vout < 5Vpp, Icc =
3.4mA, Rp = 100kOhms, Rl = 500Ohms
-3dB bandwidth, Vout < 5Vpp, Icc =
1mA, Rp = 300kOhms, Rl = 1kOhms
GFPL
Gain Flatness
Peaking Low
0.1Mhz to 25MHz, Vout < 2Vpp, Icc =
9mA, Rp = 33kOhms, Rl = 250Ohms
GFPH
Gain Flatness
Peaking High
>25MHz, Vout < 2Vpp, Icc = 9mA, Rp =
33kOhms, Rl = 250Ohms
9
UNIT
SUBGROUPS
MHz
4
1
100
MHz
5
1
115
MHz
6
80
MHz
4
2
65
MHz
5
2
80
MHz
6
1
35
MHz
4
1
30
MHz
5, 6
1
95
MHz
4, 6
1
80
MHz
5
1
50
MHz
4, 6
1
40
MHz
5
1
20
MHz
4
1
18
MHz
5
1
0.3
dB
4
1
0.4
dB
5, 6
0.2
dB
4
2
0.3
dB
5, 6
1
0.1
dB
4
1
0.2
dB
5, 6
1
0.5
dB
4
1
0.6
dB
5, 6
0.4
dB
4
2
0.5
dB
5, 6
1
0.2
dB
4
1
0.3
dB
5, 6
>20MHz, Vout < 2Vpp, Icc = 3.4mA, Rp =
100kOhms, Rl = 500Ohms
>10MHz, Vout < 2Vpp, Icc = 1mA, Rp =
300kOhms, Rl = 1kOhms
MAX
115
0.1Mhz to 20MHz, Vout < 2Vpp, Icc =
3.4mA, Rp = 100kOhms, Rl = 500Ohms
0.1Mhz to 10MHz, Vout < 2Vpp, Icc =
1mA, Rp = 300kOhms, Rl = 1kOhms
MIN
1
-3dB bandwidth, Vout < 2Vpp, Icc =
3.4mA, Rp = 100kOhms, Rl = 500Ohms
-3dB bandwidth, Vout < 2Vpp, Icc =
1mA, Rp = 300kOhms, Rl = 1kOhms
PINNAME
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
GFR
PARAMETER
Gain Flatness
Rolloff
CONDITIONS
NOTES
0.1Mhz to 50MHz, Vout < 2Vpp, Icc =
9mA, Rp = 33kOhms, Rl = 250Ohms
PINNAME
MIN
LPD
Linear Phase
Deviation
< 50MHz, Vout = 2Vpp, Icc = 9mA, Rp =
33kOhms, Rl = 250Ohms
< 40MHz, Vout = 2Vpp, Icc = 3.4mA, Rp
= 100kOhms, Rl = 500Ohms
< 20MHz, Vout = 2Vpp, Icc = 1mA, Rp =
300kOhms, Rl = 1kOhms
HD2
2nd Harmonic
Distortion
2Vpp at 20MHz, Vout = 2Vpp, Icc = 9mA,
Rp = 33kOhms, Rl = 250Ohms
HD3
3rd Harmonic
Distortion
2Vpp at 20MHz, Vout = 2Vpp, Icc = 9mA,
Rp = 33kOhms, Rl = 250Ohms
dB
4, 6
1
1.3
dB
5
1.0
dB
4
2
1.3
dB
5
2
1.0
dB
6
1
1.0
dB
4, 6
1
1.3
dB
5
1
1.0
Deg
4, 6
1
1.2
Deg
5
1
1.0
Deg
4, 6
1
1.2
Deg
5
1
0.8
Deg
4, 6
1
1.0
Deg
5
1
-45
dBc
4, 5
1
-40
dBc
6
-45
dBc
4
2
-45
dBc
5
2
-40
dBc
6
1
-45
dBc
4, 5
1
-40
dBc
6
1
-55
dBc
4, 5,
6
-55
dBc
4
2
-55
dBc
5, 6
1
-55
dBc
4, 5,
6
2Vpp at 10MHz, Vout = 2Vpp, Icc =
3.4mA, Rp = 100kOhms, Rl = 500Ohms
2Vpp at 5MHz, Vout = 2Vpp, Icc = 1mA,
Rp = 300kOhms, Rl = 1kOhms
10
SUBGROUPS
1.0
2Vpp at 10MHz, Vout = 2Vpp, Icc =
3.4mA, Rp = 100kOhms, Rl = 500Ohms
2Vpp at 5MHz, Vout = 2Vpp, Icc = 1mA,
Rp = 300kOhms, Rl = 1kOhms
UNIT
1
0.1Mhz to 40MHz, Vout < 2Vpp, Icc =
3.4mA, Rp = 100kOhms, Rl = 500Ohms
0.1Mhz to 20MHz, Vout < 2Vpp, Icc =
1mA, Rp = 300kOhms, Rl = 1kOhms
MAX
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
NF
PARAMETER
Noise Floor
CONDITIONS
NOTES
> 1 MHz, Icc = 9mA, Rp = 33kOhms, Rl =
250Ohms
1, 4
PINNAME
MIN
UNIT
-154
dBm
4, 6
-153
1Hz
dBm
5
-153
1Hz
dBm
4, 6
-152
1Hz
dBm
5
-150
1Hz
dBm
4, 6
-149
1Hz
dBm
5
1, 4
65
1Hz
uV
4, 6
1, 4
70
uV
5
1, 4
70
uV
4, 6
1, 4
80
uV
5
1, 4
70
uV
4, 6
1, 4
80
uV
5
1, 4
> 1 MHz, Icc = 3.4mA, Rp = 100kOhms,
Rl = 500Ohms
1, 4
1, 4
> 1 MHz, Icc = 1mA, Rp = 300kOhms, Rl
= 1kOhms
1, 4
1, 4
INV
Noise Floor
1MHz to 200MHz, Icc = 9mA, Rp =
33kOhms, Rl = 250Ohms
1MHz to 200MHz, Icc = 3.4mA, Rp =
100kOhms, Rl =500Ohms
1MHz to 200MHz, Icc = 1mA, Rp =
300kOhms, Rl = 1kOhms
SR
Ts
Slew Rate
Settling Time
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms,
Av = +2, Vout = 3V, measured at +1V
SUBGROUPS
MAX
1
1200
V/us 9, 10
1
1000
V/us 11
Icc = 3.4mA, Rp = 100kOhms, Rl =
500Ohms, Av = +2, Vout = 3V, measured
at +1V
1
800
V/us 9, 10
1
700
V/us 11
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms,
Av = +2, Vout = 3V, measured at +1V
1
600
V/us 9, 10
1
500
V/us 11
Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms,
2V step at +0.1% of the fixed value
1
16
ns
9, 10,
11
Icc = 3.4mA, Rp = 100kOhms, Rl =
500Ohms, 2V step at +0.05% of the
fixed value
1
22
ns
9, 10,
11
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms,
2V step at +0.05% of the fixed value
1
60
ns
9, 10
1
70
ns
11
11
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms,
peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3)
SYMBOL
Tf
PARAMETER
Rise and Fall
Time
CONDITIONS
NOTES
Icc = 9mA, 2V step, Rp = 33kOhms, Rl =
250Ohms
Icc = 3.4mA, 2V step, Rp = 100kOhms,
Rl = 500Ohms
Icc = 1mA, 2V step, Rp = 300kOhms, Rl
= 1kOhms
Tr
Rise and Fall
Time
Icc = 9mA, 5V step, Rp = 33kOhms, Rl =
250Ohms
Icc = 3.4mA, 5V step, Rp = 100kOhms,
Rl = 500Ohms
Icc = 1mA, 5V step, Rp = 300kOhms, Rl
= 1kOhms
OS
Overshoot
Icc = 9mA, 2V step, Rp = 33kOhms, Rl =
250Ohms
Icc = 3.4mA, 2V step, Rp = 100kOhms,
Rl = 500Ohms
Icc = 1mA, 2V step, Rp = 300kOhms, Rl
= 1kOhms
Note 1:
Note 2:
Note 3:
Note 4:
PINNAME
MIN
MAX
UNIT
1
3.0
ns
9, 11
1
3.5
ns
10
1
4.4
ns
9, 11
1
5.4
ns
10
1
10
ns
9
1
12
ns
10, 11
1
3.7
ns
9, 11
1
4.4
ns
10
1
7.0
ns
9, 11
1
8.8
ns
10
1
18
ns
9
1
20
ns
10, 11
1
12
%
9
1
15
%
10, 11
1
10
%
9
1
12
%
10, 11
1
5
%
9
1
8
%
10, 11
If not tested, shall be guaranteed to the limits specified in table I herein.
Group A testing only.
The algebraic convention, whereby the most negative value is a minimum and the most
positive is a maximum, is used in this table. Negative current shall be defined as
conventional current flow out of a device terminal.
Noise tests are performed from 1MHz to 200MHz for Icc = 9mA, 1MHz to 200MHz for Icc =
3.4mA, and 1MHz to 100MHz for Icc = 1mA.
12
SUBGROUPS
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Graphics and Diagrams
GRAPHICS#
DESCRIPTION
07076HRA2
CERDIP (J), 8 LEAD (B/I CKT)
J08ARL
CERDIP (J), 8 LEAD (P/P DWG)
P000408A
CERDIP (J), 8 LEAD (PINOUT)
See attached graphics following this page.
13
N/C
1
8
Rp
VINV
2
7
+VCC
3
6
VOUT
4
5
N/C
VNON-INV
-VCC
CLC505J
8 - LEAD DIP
CONNECTION DIAGRAM
TOP VIEW
P000408A
N
MIL/AEROSPACE OPERATIONS
2900 SEMICONDUCTOR DRIVE
SANTA CLARA, CA 95050
MICROCIRCUIT DATA SHEET
MNCLC505A-X REV 0A0
Revision History
Rev
ECN #
0A0
M0003517 08/18/99
Rel Date
Originator
Changes
Shaw Mead
Initial MDS Release
14
Similar pages