Murata LQM2MPZ4R7MG0B Inductance Datasheet

LQM2MPZ4R7MG0#
“#” indicates a package specification code.
< List of part numbers with package codes >
LQM2MPZ4R7MG0L , LQM2MPZ4R7MG0B
Shape
Notes
In operating temperature exceeding +85℃, derating of current is necessary for
LQM2MPN̲G0 series.
Please apply the derating curve shown in chart according to the operating
temperature.
Please confirm the below "Notice (Rating)".
When applied Rated current to the Products, temperature rise caused by
self-generated heat shall be limited to 40 ℃ max.
References
Packaging
code
L size
2.0 ±0.15mm
W size
1.6 ±0.15mm
T size
0.9 ±0.1mm
Size code in inch (mm)
0806 (2016)
Specifications
Minimum quantity
φ180mm Embossed taping
3000
Packing in bulk
1000
Mass (Typ.)
1 piece
0.012g
Specifications
Inductance
4.7µH ±20%
Inductance test frequency
1MHz
Rated current (Itemp) (Based on Temperature
rise)
1.1A(Ambient temperature 85℃)
0.8A(Ambient temperature
125℃)
Max. of DC resistance
0.175Ω
Avg. of DC resistance
0.14Ω(typ.)
Self resonance frequency (min.)
20MHz
Operating temperature range
-55〜125℃
Class of magnetic shield
Magnetic shield of ferrite
1 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, itʼs specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
URL : http://www.murata.com/
Last updated: 2016/04/21
Chart of characteristic data (The charts below may show another part number which shares its characteristics.)
Inductance-Frequency characteristics (Typ.)
Inductance-Current characteristics (Typ.)
Temperature rise characteristics (Typ.)
Notice (Rating)
2 of 2
This PDF data has only typical specifications because there is no space
for detailed specifications.
Therefore, please reviewour product specifications or consult the
approval sheet for product specifications before ordering.
Last updated: 2016/04/21
Similar pages