ADPOW APT30S20SG High voltage schottky diode Datasheet

1
2
TO
-24
7
1 - Cathode
2 - Anode
Back of Case - Cathode
D3PAK
1
APT30S20B(G)
APT30S20S(G)
200V 45A
200V 45A
*G Denotes RoHS Compliant, Pb Free Terminal Finish.
2
2
1
HIGH VOLTAGE SCHOTTKY DIODE
PRODUCT APPLICATIONS
PRODUCT FEATURES
PRODUCT BENEFITS
• Parallel Diode
• Ultrafast Recovery Times
• Low Losses
• Soft Recovery Characteristics
• Low Noise Switching
• Popular TO-247 Package or
• Cooler Operation
•
•
•
•
•
-Switchmode Power Supply
-Inverters
Free Wheeling Diode
-Motor Controllers
-Converters
Snubber Diode
Uninterruptible Power Supply (UPS)
48 Volt Output Rectifiers
High Speed Rectifiers
Surface Mount D3PAK Package
• Low Forward Voltage
• Higher Reliability Systems
• High Blocking Voltage
• Increased System Power
• Low Leakage Current
All Ratings: TC = 25°C unless otherwise specified.
MAXIMUM RATINGS
Symbol
VR
APT30S20B_S(G)
Characteristic / Test Conditions
Maximum Peak Repetitive Reverse Voltage
VRWM
Maximum Working Peak Reverse Voltage
IF(AV)
Maximum Average Forward Current (TC = 125°C, Duty Cycle = 0.5)
IFSM
TJ,TSTG
TL
EVAL
UNIT
Maximum D.C. Reverse Voltage
VRRM
IF(RMS)
Density
200
Volts
45
RMS Forward Current (Square wave, 50% duty)
121
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
320
Amps
-55 to 150
Operating and StorageTemperature Range
°C
300
Lead Temperature Case for 10 Sec.
30
Avalanche Energy (2A, 15mH)
mJ
STATIC ELECTRICAL CHARACTERISTICS
Forward Voltage
IRM
Maximum Reverse Leakage Current
CT
Junction Capacitance, VR = 200V
TYP
MAX
IF = 30A
.80
.85
IF = 60A
.91
IF = 30A, TJ = 125°C
.67
Volts
VR = VR Rated
0.5
VR = VR Rated, TJ = 125°C
15
APT Website - http://www.advancedpower.com
UNIT
mA
150
pF
10-2003
VF
MIN
053-6031 Rev D
Symbol
APT30S20B_S(G)
DYNAMIC CHARACTERISTICS
Characteristic
Symbol
Test Conditions
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
MIN
TYP
-
55
ns
-
190
nC
-
6
-
100
ns
-
450
nC
-
9
-
70
ns
-
960
nC
-
24
Amps
MIN
TYP
IF = 30A, diF/dt = -200A/µs
VR = 133V, TC = 25°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 30A, diF/dt = -200A/µs
VR = 133V, TC = 125°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 30A, diF/dt = -700A/µs
VR = 133V, TC = 125°C
Maximum Reverse Recovery Current
MAX
-
-
UNIT
Amps
Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
Characteristic / Test Conditions
MAX
RθJC
Junction-to-Case Thermal Resistance
.58
RθJA
Junction-to-Ambient Thermal Resistance
40
WT
Torque
°C/W
0.22
oz
5.9
g
Package Weight
10
lb•in
1.1
N•m
Maximum Mounting Torque
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.9
0.5
0.7
0.4
0.3
0.5
0.2
0.3
Note:
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
0.6
Duty Factor D = t1/t2
0.1
10-5
Peak TJ = PDM x ZθJC + TC
SINGLE PULSE
0.05
10-4
10-3
10-2
10-1
1.0
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
RC MODEL
Junction
temp (°C)
10-2003
t1
t2
0.1
0
053-6031 Rev D
UNIT
0.250 °C/W
0.00518 J/°C
0.330 °C/W
0.139 J/°C
Power
(watts)
Case temperature (°C)
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
TYPICAL PERFORMANCE CURVES
trr, REVERSE RECOVERY TIME
(ns)
IF, FORWARD CURRENT
(A)
80
70
TJ = 150°C
60
50
40
TJ = 125°C
30
20
10
0.2
0.4
0.6
0.8
1
1.2
VF, ANODE-TO-CATHODE VOLTAGE (V)
Figure 2. Forward Current vs. Forward Voltage
30A
80
15A
60
40
20
0
200
400
600
800
-diF /dt, CURRENT RATE OF CHANGE(A/µs)
Figure 3. Reverse Recovery Time vs. Current Rate of Change
35
TJ = 125°C
VR = 133V
1600
1400
60A
1200
1000
800
30A
600
15A
400
200
0
200
400
600
800
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change
IRRM, REVERSE RECOVERY CURRENT
(A)
Qrr, REVERSE RECOVERY CHARGE
(nC)
100
0
0
0
TJ = 125°C
VR = 133V
30
60A
25
20
15
10
30A
15A
5
0
0
200
400
600
800
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 5. Reverse Recovery Current vs. Current Rate of Change
140
1.4
1.2
trr
120
Qrr
1.0
100
IRRM
0.8
IF(AV) (A)
Kf, DYNAMIC PARAMETERS
(Normalized to 700A/µs)
60A
TJ = -55°C
1800
trr
0.6
Qrr
0.4
0.2
0.0
TJ = 125°C
VR = 133V
TJ = 25°C
90
0
APT30S20B_S(G)
120
100
80
60
40
20
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature
0
Duty cycle = 0.5
TJ = 150°C
25
50
75
100
125
150
Case Temperature (°C)
Figure 7. Maximum Average Forward Current vs. CaseTemperature
2000
1500
10-2003
1000
500
0
.3
1
10
100 200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
053-6031 Rev D
CJ, JUNCTION CAPACITANCE
(pF)
2500
APT30S20B_S(G)
Vr
diF /dt Adjust
+18V
APT20M36BLL
0V
D.U.T.
30µH
trr/Qrr
Waveform
PEARSON 2878
CURRENT
TRANSFORMER
Figure 9. Diode Test Circuit
1
IF - Forward Conduction Current
2
diF /dt - Rate of Diode Current Change Through Zero Crossing.
3
IRRM - Maximum Reverse Recovery Current.
4
trr - Reverse Recovery Time, measured from zero crossing where diode
current goes from positive to negative, to the point at which the straight
line through IRRM and 0.25 IRRM passes through zero.
5
1
4
Zero
5
0.25 IRRM
3
2
Qrr - Area Under the Curve Defined by IRRM and trr.
Figure 10, Diode Reverse Recovery Waveform and Definitions
3
TO-247 Package Outline
e1 SAC: Tin,
Silver, Copper
D PAK Package Outline
e3 100% Sn Plated
15.49 (.610)
16.26 (.640)
6.15 (.242) BSC
5.38 (.212)
6.20 (.244)
Cathode
10-2003
4.90 (.193)
5.10 (.201)
1.45 (.057)
1.60 (.063)
15.85 (.624)
16.05 (.632)
1.00 (.039)
1.15 (.045)
20.80 (.819)
21.46 (.845)
0.40 (.016)
0.65 (.026)
0.40 (.016)
0.79 (.031)
1.65 (.065)
2.13 (.084)
19.81 (.780)
20.32 (.800)
1.01 (.040)
1.40 (.055)
0.020 (.001)
0.250 (.010)
2.70 (.106)
2.90 (.114)
1.15 (.045)
1.45 (.057)
1.20 (.047)
1.90 (.075) 1.40 (.055)
2.10 (.083)
5.45 (.215) BSC
(2 Plcs.)
Anode
2.21 (.087)
2.59 (.102)
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
13.30 (.524)
13.60 (.535)
12.40 (.488)
12.70 (.500)
18.70 (.736)
19.10 (.752)
3.50 (.138)
3.81 (.150)
4.50 (.177) Max.
053-6031 Rev D
Cathode
(Heat Sink)
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
Anode
Cathode
Dimensions in Millimeters (Inches)
2.40 (.094)
2.70 (.106)
(Base of Lead)
Heat Sink (Cathode)
and Leads
are Plated
Similar pages