AD ADG918BCP-500RL7 Wideband 4 ghz, 43 db isolation at 1 ghz, cmos 1.65 v to 2.75 v, 2:1 mux/spdt Datasheet

Wideband 4 GHz, 43 dB Isolation at 1 GHz,
CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT
ADG918/ADG919
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Wideband switch: −3 dB @ 4 GHz
Absorptive/reflective switches
High off isolation (43 dB @ 1 GHz)
Low insertion loss (0.8 dB @1 GHz)
Single 1.65 V to 2.75 V power supply
CMOS/LVTTL control logic
8-lead MSOP and tiny 3 mm × 3 mm LFCSP packages
Low power consumption (<1 μA)
ADG918
RF1
RFC
50Ω
RF2
CTRL
50Ω
APPLICATIONS
ADG919
Wireless communications
General-purpose RF switching
Dual-band applications
High speed filter selection
Digital transceiver front end switch
IF switching
Tuner modules
Antenna diversity switching
RF1
RFC
RF2
03335-001
CTRL
Figure 1.
GENERAL DESCRIPTION
The ADG918/ADG919 are wideband switches using a CMOS
process to provide high isolation and low insertion loss to
1 GHz. The ADG918 is an absorptive (matched) switch having
50 Ω terminated shunt legs, whereas the ADG919 is a reflective
switch. These devices are designed such that the isolation is
high over the dc to 1 GHz frequency range. They have on-board
CMOS control logic, thus eliminating the need for external
controlling circuitry. The control inputs are both CMOS and
LVTTL compatible. The low power consumption of these
CMOS devices makes them ideally suited to wireless and
general-purpose high frequency switching applications.
PRODUCT HIGHLIGHTS
1.
–43 dB off isolation @ 1 GHz.
2.
0.8 dB insertion loss @ 1 GHz.
3.
Tiny 8-lead MSOP/LFCSP packages.
–0.4
0
–0.6
–0.8
–20
–1.0
INSERTION LOSS (dB)
ISOLATION (dB)
–30
–40
–50
S12
–60
–70
–1.4
–1.6
–1.8
–2.0
–2.2
–2.4
–2.6
–80
–2.8
S21
100k
1M
10M
100M
FREQUENCY (Hz)
–3.0
1G
10G
03335-003
–90
–100
10k
–1.2
–3.2
10k
VDD = 2.5V
TA = 25°C
100k
1M
10M
100M
FREQUENCY (Hz)
1G
10G
03335-004
–10
VDD = 2.5V
TA = 25°C
Figure 2. Off Isolation vs. Frequency
Figure 3. Insertion Loss vs. Frequency
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2003–2008 Analog Devices, Inc. All rights reserved.
Rev. C
ADG918/ADG919
TABLE OF CONTENTS
Features .............................................................................................. 1
Terminology .................................................................................... 10
Applications ....................................................................................... 1
Test Circuits ..................................................................................... 11
Functional Block Diagrams ............................................................. 1
Applications Information .............................................................. 13
General Description ......................................................................... 1
Absorptive vs. Reflective Switch ............................................... 13
Product Highlights ........................................................................... 1
Wireless Metering....................................................................... 13
Revision History ............................................................................... 2
Tuner Modules ............................................................................ 13
Specifications..................................................................................... 3
Filter Selection ............................................................................ 13
Absolute Maximum Ratings............................................................ 5
ADG9xx Evaluation Board ........................................................... 14
ESD Caution .................................................................................. 5
Outline Dimensions ....................................................................... 15
Pin Configuration and Function Descriptions ............................. 6
Ordering Guide .......................................................................... 16
Typical Performance Characteristics ............................................. 7
REVISION HISTORY
9/08—Rev. B to Rev. C
Changes to Ordering Guide .......................................................... 16
8/08—Rev. A to Rev. B
Changes to Table 1, AC Electrical Characteristics, Third Order
Intermodulation Intercept ............................................................... 3
Updated Outline Dimensions ....................................................... 15
Changes to Ordering Guide .......................................................... 16
9/04—Changed from Rev. 0 to Rev. A
Updated Format .................................................................. Universal
Change to Data Sheet Title ...............................................................1
Change to Features ............................................................................1
Change to Product Highlights .........................................................1
Changes to Specifications .................................................................3
Change to ADG9xx Evaluation Board section ........................... 13
Changes to Ordering Guide .......................................................... 14
8/03 Revision 0: Initial Version
Rev. C | Page 2 of 16
ADG918/ADG919
SPECIFICATIONS
VDD = 1.65 V to 2.75 V, GND = 0 V, input power = 0 dBm, all specifications TMIN to TMAX, unless otherwise noted. Temperature range for
B Version: −40°C to +85°C.
Table 1.
Parameter
AC ELECTRICAL CHARACTERISTICS
Operating Frequency 2
3 dB Frequency 3
Input Power3
Symbol
tON
tOFF
tRISE
tFALL
P–1 dB
IP3
0 V dc bias
0.5 V dc bias
DC to 100 MHz; VDD = 2.5 V ± 10%
500 MHz; VDD = 2.5 V ± 10%
1000 MHz; VDD = 2.5 V ± 10%
100 MHz
500 MHz
1000 MHz
100 MHz
500 MHz
1000 MHz
100 MHz
500 MHz
1000 MHz
100 MHz
500 MHz
1000 MHz
DC to 100 MHz
500 MHz
1000 MHz
DC to 100 MHz
500 MHz
1000 MHz
50% CTRL to 90% RF
50% CTRL to 10% RF
10% to 90% RF
90% to 10% RF
1000 MHz
900 MHz/901 MHz, 4 dBm
VINH
VINH
VINL
VINL
II
VDD = 2.25 V to 2.75 V
VDD = 1.65 V to 1.95 V
VDD = 2.25 V to 2.75 V
VDD = 1.65 V to 1.95 V
0 V ≤ VIN ≤ 2.75 V
S21, S12
Isolation—RFC to RF1/RF2
(CP Package)
S21, S12
Isolation—RFC to RF1/RF2
(RM Package)
S21, S12
Isolation—RF1 to RF2 (Crosstalk)
(CP Package)
S21, S12
Isolation—RF1 to RF2 (Crosstalk)
(RM Package)
S21, S12
Return Loss (On Channel)3
S11, S22
Return Loss (Off Channel)3
ADG918
S11, S22
Input Low Voltage
Input Leakage Current
Min
B Version
Typ 1
dc
Insertion Loss
On Switching Time3
Off Switching Time3
Rise Time3
Fall Time3
1 dB Compression3
Third Order Intermodulation Intercept
Video Feedthrough 4
DC ELECTRICAL CHARACTERISTICS
Input High Voltage
Conditions
Rev. C | Page 3 of 16
57
46
36
55
43
34
55
41
31
54
39
31
21
22
22
18
17
16
28.5
0.4
0.5
0.8
60
49
43
60
47
37
58
44
37
57
42
33
27
27
26
23
21
20
6.6
6.5
6.1
6.1
17
36
2.5
Max
Unit
2
4
7
16
0.7
0.8
1.25
GHz
GHz
dBm
dBm
dB
dB
dB
dB
dB
dB
dB
dB
dB
10
9.5
9
9
1.7
0.65 VCC
± 0.1
0.7
0.35 VCC
±1
dB
dB
dB
dB
dB
dB
ns
ns
ns
ns
dBm
dBm
mV p-p
V
V
V
V
μA
ADG918/ADG919
Parameter
CAPACITANCE3
RF On Capacitance
CTRL Input Capacitance
POWER REQUIREMENTS
VDD
Quiescent Power Supply Current
Symbol
Conditions
CRF ON
CCTRL
f = 1 MHz
f = 1 MHz
IDD
Digital inputs = 0 V or VDD
Min
B Version
Typ 1
1.6
2
1.65
1
Max
0.1
Unit
pF
pF
2.75
1
V
μA
Typical values are at VDD = 2.5 V and 25°C, unless otherwise stated.
Point at which insertion loss degrades by 1 dB.
3
Guaranteed by design, not subject to production test.
4
The dc transience at the output of any port of the switch when the control voltage is switched from high to low or low to high in a 50 Ω test setup, measured with 1 ns
rise time pulses and 500 MHz bandwidth.
2
Rev. C | Page 4 of 16
ADG918/ADG919
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter
VDD to GND
Inputs to GND
Continuous Current
Input Power
Operating Temperature Range
Industrial (B Version)
Storage Temperature Range
Junction Temperature
MSOP Package
θJA Thermal Impedance
LFCSP Package
θJA Thermal Impedance (2-layer board)
θJA Thermal Impedance (4-layer board)
Lead Temperature, Soldering (10 sec)
IR Reflow, Peak Temperature (<20 sec)
ESD
Rating
–0.5 V to +4 V
–0.5 V to VDD + 0.3 V1
30 mA
18 dBm
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
–40°C to +85°C
–65°C to +150°C
150°C
206°C/W
84°C/W
48°C/W
300°C
235°C
1 kV
1
RF1 and RF2 off port inputs to ground: −0.5 V to VDD – 0.5 V.
Rev. C | Page 5 of 16
ADG918/ADG919
VDD 1
CTRL 2
GND 3
ADG918/
ADG919
8
RF1
7
GND
6
GND
TOP VIEW
RFC 4 (Not to Scale) 5 RF2
03335-002
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 4. 8-Lead MSOP (RM-8) and
8-Lead 3 mm x 3 mm LFCSP (CP-8);
Exposed Pad Tied to Substrate, GND
Table 3. Pin Function Descriptions
Pin No.
1
2
3, 6, 7
4
5
8
Mnemonic
VDD
CTRL
GND
RFC
RF2
RF1
Function
Power Supply Input. These parts can be operated from 1.65 V to 2.75 V, and VDD should be decoupled to GND.
Logic Control Input. See Table 4.
Ground Reference Point for All Circuitry on the Part.
COMMON RF Port for Switch.
RF2 Port.
RF1 Port.
Table 4. Truth Table
CTRL
0
1
Signal Path
RF2 to RFC
RF1 to RFC
Rev. C | Page 6 of 16
ADG918/ADG919
TYPICAL PERFORMANCE CHARACTERISTICS
–0.2
–0.2
–0.4
–0.4
–0.6
–0.6
VDD = 2.5V
–0.8 +25°C
VDD = 2.75V
INSERTION LOSS (dB)
–1.4
–1.6
–1.8
–2.0
–2.2
–2.4
–2.6
–2.8
–1.2
–1.4
–1.6
–1.8
–2.0
–2.2
–2.4
–2.6
–2.8
TA = 25°C
100k
1M
10M
100M
FREQUENCY (Hz)
1G
10G
–3.2
10k
Figure 5. Insertion Loss vs. Frequency over Supplies
(RF1/RF2, S12, and S21)
–10
–0.40
10M
100M
FREQUENCY (Hz)
1G
10G
VDD = 1.65V TO 2.75V
TA = 25°C
–20
–0.45
VDD = 2.5V
–0.50
–30
ISOLATION (dB)
INSERTION LOSS (dB)
1M
0
VDD = 2.75V
–0.35
VDD = 2.25V
–0.55
–0.60
–0.65
–40
S12
–50
–60
–70
–0.70
–0.75
–80
TA = 25°C
100k
1M
10M
100M
FREQUENCY (Hz)
1G
10G
–90
10k
03335-019
–0.80
10k
S21
100k
1M
10M
100M
1G
10G
FREQUENCY (Hz)
Figure 9. Isolation vs. Frequency over Supplies (RF1/RF2, ADG918)
Figure 6. Insertion Loss vs. Frequency over Supplies (RF1/RF2,
S12, and S21) (Zoomed Figure 5 Plot)
0
–0.2
–0.4
–10
–0.6
VDD = 1.8V
–1.0
VDD = 1.65V
VDD = 1.95V
VDD = 1.65V TO 2.75V
TA = 25°C
–20
–30
–1.2
ISOLATION (dB)
–1.4
–1.6
–1.8
–2.0
–2.2
–40
–50
S12
–60
–70
–2.4
–80
–2.8
–3.0
–3.2
10k
100k
S21
–90
TA = 25°C
1M
10M
100M
FREQUENCY (Hz)
1G
10G
–100
10k
100k
1M
10M
100M
1G
10G
FREQUENCY (Hz)
Figure 10. Isolation vs. Frequency over Supplies (RF1/RF2, ADG919)
Figure 7. Insertion Loss vs. Frequency over Supplies
(RF1/RF2, S12, and S21)
Rev. C | Page 7 of 16
03335-022
–2.6
03335-021
INSERTION LOSS (dB)
100k
Figure 8. Insertion Loss vs. Frequency over Temperature
(RF1/RF2, S12, and S21)
–0.30
–0.8
VDD = 2.5V
–3.0
03335-017
–3.2
10k
03335-020
INSERTION LOSS (dB)
–1.2
–3.0
+85°C
–1.0
03335-018
–0.8 V = 2.25V
DD
–1.0
–40°C
ADG918/ADG919
–10
VDD = 2.5V
–20
CH1
–30
S12 (+85°C)
–50
–60
CH2/3
S12 (+25°C)
–70
S12 (–40°C)
–80
–90
–100
10k
100k
1M
10M
100M
1G
10G
FREQUENCY (Hz)
CH1 = CTRL = 1V/DIV
TRISE = 6.1ns
CH2 = RF1 = 100mV/DIV
TFALL = 6.1ns
03335-024
S21
(–40°C, +25°C, +85°C)
03335-023
ISOLATION (dB)
–40
CH3 = RF2 = 100mV/DIV
Figure 14. Switch Timing
Figure 11. Isolation vs. Frequency over Temperature (RF1/RF2, ADG919)
0
TA = 25°C
VDD = 2.5V
–5
RETURN LOSS (dB)
–10
–15
OFF SWITCH (ADG918)
CTRL
–20
–25
RFC
–30
ON SWITCH
–35
1M
10M
100M
1G
10G
FREQUENCY (Hz)
CH2 p-p
2.002mV
CH1 500mV
CH2 1mVΩ
03335-027
100k
03335-026
–40
10k
m 10.0ns
Figure 15. Video Feedthrough
Figure 12. Return Loss vs. Frequency (RF1/RF2, S11)
40
–10
TA = 25°C
VDD = 2.5V
–15
–20
35
–25
30
25
IP3 (dBm)
–35
–40
–45
–50
–55
–60
20
15
10
5
–70
–75
–80
10k
100k
1M
10M
100M
FREQUENCY (Hz)
1G
10G
Figure 13. Crosstalk vs. Frequency (RF1/RF2, S12, S21)
0
250
VDD = 2.5V
TA = 25°C
350
450
550
650
FREQUENCY (MHz)
Figure 16. IP3 vs. Frequency
Rev. C | Page 8 of 16
750
850
03335-029
–65
03335-028
CROSSTALK (dB)
–30
ADG918/ADG919
20
18
16
12
10
8
6
4
VDD = 2.5V
TA = 25°C
2
0
0
250
500
750
1000
FREQUENCY (MHz)
1250
1500
03335-025
P–1dB (dBm)
14
Figure 17. P-1 dB vs. Frequency
Rev. C | Page 9 of 16
ADG918/ADG919
TERMINOLOGY
tFALL
Fall time; time for the RF signal to fall from 90% to 10% of the
on level.
VDD
Most positive power supply potential.
IDD
Positive supply current.
Off Isolation
The attenuation between the input and output ports of the
switch when the switch control voltage is in the off condition.
GND
Ground (0 V) reference.
Insertion Loss
The attenuation between the input and output ports of the
switch when the switch control voltage is in the on condition.
CTRL
Logic control input.
VINL
Maximum input voltage for Logic 0.
P–1 dB
1 dB compression point. The RF input power level at which the
switch insertion loss increases by 1 dB over its low level value. It
is a measure of how much power the on switch can handle
before the insertion loss increases by 1 dB.
VINH
Minimum input voltage for Logic 1.
IINL (IINH)
Input current of the digital input.
CIN
Digital input capacitance.
tON
Delay between applying the digital control input and the output
switching on.
tOFF
Delay between applying the digital control input and the output
switching off.
tRISE
Rise time; time for the RF signal to rise from 10% to 90% of the
on level.
IP3
Third order intermodulation intercept. This is a measure of the
power in false tones that occur when closely spaced tones are
passed through a switch, whereby the nonlinearity of the switch
causes these false tones to be generated.
Return Loss
The amount of reflected power relative to the incident power at
a port. Large return loss indicates good matching. By measuring
return loss, the VSWR (voltage standing wave ratio) can be
calculated from conversion charts. VSWR indicates the degree
of matching present at a switch RF port.
Video Feedthrough
Spurious signals present at the RF ports of the switch when the
control voltage is switched from high to low or low to high
without an RF signal present.
Rev. C | Page 10 of 16
ADG918/ADG919
TEST CIRCUITS
Setups for the ADG918 are similar.
VDD
0.1µF
VDD
VDD
RF1
VDD
VS
CTRL
50%
VCTRL
RL
50Ω
NETWORK
ANALYZER
50Ω
RFC
VOUT
RFx
RFC
50%
RF2
CTRL
90%
VOUT
VOUT
RL
50Ω
ADG919
50Ω
VS
10%
VCTRL
tON
GND
03335-009
GND
tOFF
03335-012
0.1µF
VOUT
INSERTION LOSS = 20log
VS
Figure 21. Insertion Loss
Figure 18. Switch Timing: tON, tOFF
VDD
0.1µF
VDD
VDD
VDD
VOUT
50Ω
RF2
RL
50Ω
RL
50Ω
CTRL
50%
50%
VCTRL
VOUT
CTRL
90%
10%
90%
10%
VCTRL
GND
tRISE
tFALL
VOUT
GND
CROSSTALK = 20log
Figure 19. Switch
VOUT
VS
Figure 22. Crosstalk
VDD
VDD
0.1µF
0.1µF
50Ω
ADG919
RF1
RL
50Ω
RFC
VS
VDD
RF1
RF2
NETWORK
ANALYZER
50Ω
NC
RFC
OSCILLOSCOPE
RF2
CTRL
NC
VCTRL
GND
OFF ISOLATION = 20log
VOUT
VS
03335-011
CTRL
ADG919
VOUT
GND
Figure 23. Video Feedthrough
Figure 20. Off Isolation
Rev. C | Page 11 of 16
03335-014
VDD
VCTRL
VS
50Ω
03335-010
VS
RF1
RFC
RFx
RFC
NETWORK
ANALYZER
ADG919
03335-013
0.1µF
ADG918/ADG919
VDD
VDD
0.1µF
0.1µF
VDD
ADG919
RF1
RFC
RF2
CTRL
VCTRL
RF1
RF
SOURCE
SPECTRUM
ANALYZER
COMBINER
RF
SOURCE
GND
RF2
VCTRL
Rev. C | Page 12 of 16
RF
SOURCE
VS
GND
Figure 25. P-1 dB
Figure 24. IP3
50Ω
RFC
CTRL
03335-015
SPECTRUM
ANALYZER
50Ω
ADG919
03335-016
VDD
ADG918/ADG919
APPLICATIONS INFORMATION
a utility metering transceiver application, providing the
required isolation between the transmit and receive signals.
The SPDT configuration isolates the high frequency receive
signal from the high frequency transmit.
LNA
ANTENNA
ADG918
Other applications include switching between high frequency
filters, an ASK generator, an FSK generator, and an antenna
diversity switch in many tuner modules.
TX/RX SWITCH
03335-005
The ADG918/ADG919 are ideal solutions for low power, high
frequency applications. The low insertion loss, high isolation
between ports, low distortion, and low current consumption of
these parts make them excellent solutions for many high
frequency switching applications. The most obvious application
is in a transmit/receive block, as shown in the wireless metering
block diagram in Figure 26.
PA
Figure 26. Wireless Metering
ABSORPTIVE VS. REFLECTIVE SWITCH
The ADG919 reflective switch is suitable for applications where
high off port VSWR does not matter and the switch has some
other desired performance feature. It can be used in many
applications, including high speed filter selection. In most cases,
an absorptive switch can be used instead of a reflective switch,
but not vice versa.
TUNER MODULES
The ADG918 can be used in a tuner module to switch between
the cable TV input and the off-air antenna. This part is also
ideal for use as an antenna diversity switch, switching different
antenna to the tuner.
ANTENNA
ADG918/
ADG919
CABLE
TUNER
03335-006
VGA
Figure 27. Tuner Modules
FILTER SELECTION
The ADG919 can be used as a 2:1 demultiplex to switch high
frequency signals between different filters and also to multiplex
the signal to the output.
RFIN
WIRELESS METERING
The ADG918 can be used in wireless metering applications. It
can be used in conjunction with the ADF7020 transceiver IC for
Rev. C | Page 13 of 16
RFC
ADG919
RF1
RF2
RF1
RF2
ADG919
Figure 28. Filter Selection
RFOUT
RFC
03335-007
The ADG918 is an absorptive (matched) switch with 50 Ω
terminated shunt legs, and the ADG919 is a reflective switch
with 0 Ω terminated shunts to ground. The ADG918 absorptive
switch has a good VSWR on each port, regardless of the switch
mode. An absorptive switch should be used when there is a need
for a good VSWR that is looking into the port but not passing
the through signal to the common port. The ADG918 is therefore ideal for applications that require minimum reflections
back to the RF source. It also ensures that the maximum power
is transferred to the load.
ADG918/ADG919
ADG9xx EVALUATION BOARD
The ADG9xx evaluation board allows designers to evaluate the
high performance wideband switches with a minimum of effort.
The RFC port (see Figure 29) is connected through a 50 Ω
transmission line to the top left SMA connector J1. RF1 and
RF2 are connected through 50 Ω transmission lines to the top
two SMA connectors, J2 and J3 respectively. A through transmission line connects J4 and J5 and is used to estimate the loss
of the PCB over the environmental conditions being evaluated.
The board is constructed of a 4-layer, FR4 material with a
dielectric constant of 4.3 and an overall thickness of 0.062
inches. Two ground layers with grounded planes provide
ground for the RF transmission lines. The transmission lines
were designed using a coplanar waveguide with ground plane
model using a trace width of 0.052 inches, a clearance to ground
plane of 0.030 inches, a dielectric thickness of 0.029 inches, and
a metal thickness of 0.014 inches.
Rev. C | Page 14 of 16
03335-008
In addition to the evaluation board, the user requires only a
power supply and a network analyzer. An application note is
available with the evaluation board and gives complete
information about operating the evaluation board.
Figure 29. ADG9xx Evaluation Board Top View
ADG918/ADG919
OUTLINE DIMENSIONS
3.20
3.00
2.80
8
3.20
3.00
2.80
5
1
5.15
4.90
4.65
4
PIN 1
0.65 BSC
0.95
0.85
0.75
1.10 MAX
0.15
0.00
0.38
0.22
COPLANARITY
0.10
0.80
0.60
0.40
8°
0°
0.23
0.08
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 30. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
0.60 MAX
5
PIN 1
INDICATOR
TOP
VIEW
2.95
2.75 SQ
2.55
8
(BOTTOM VIEW)
0.90 MAX
0.85 NOM
SEATING
PLANE
0.50
0.40
0.30
0.70 MAX
0.65 TYP
0.05 MAX
0.01 NOM
0.30
0.23
0.18
0.20 REF
1.60
1.45
1.30
EXPOSED
PAD
4
12° MAX
0.50
BSC
0.60 MAX
1
1.89
1.74
1.59
PIN 1
INDICATOR
EXPOSED PAD IS CONNECTED INTERNAL LY.
FOR INCREASED RELIABILIT Y OF THE SOLDER
JOINTS AND MAXIMUM THERMAL CAPABILITY IT
IS RECOMMENDED THAT THE PAD BE SOLDERED
TO THE GROUND PLANE.
Figure 31. 8-Lead Lead Frame Chip Scale Package [LFCSP_VD]
3 mm x 3 mm Body, Very Thin, Dual Lead
(CP-8-2)
Dimensions shown in millimeters
Rev. C | Page 15 of 16
061507-B
3.25
3.00 SQ
2.75
ADG918/ADG919
ORDERING GUIDE
Model
ADG918BRM
ADG918BRM-500RL7
ADG918BRM-REEL
ADG918BRM-REEL7
ADG918BRMZ 1
ADG918BRMZ-500RL71
ADG918BRMZ-REEL1
ADG918BRMZ-REEL71
ADG918BCP-500RL7
ADG918BCP-REEL7
ADG918BCPZ-500RL71
ADG918BCPZ-REEL71
ADG919BRM
ADG919BRM-500RL7
ADG919BRM-REEL
ADG919BRM-REEL7
ADG919BRMZ1
ADG919BRMZ-REEL1
ADG919BRMZ-REEL71
ADG919BCP-500RL7
ADG919BCP-REEL7
ADG919BCPZ-REEL71
EVAL-ADG918EBZ1
EVAL-ADG919EBZ1
1
Temperature
Range
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Package Description
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Lead Frame Chip Scale Package (LFCSP_VD)
8-Lead Lead Frame Chip Scale Package (LFCSP_VD)
8-Lead Lead Frame Chip Scale Package (LFCSP_VD)
8-Lead Lead Frame Chip Scale Package (LFCSP_VD)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Mini Small Outline Package (MSOP)
8-Lead Lead Frame Chip Scale Package (LFCSP_VD)
8-Lead Lead Frame Chip Scale Package (LFCSP_VD)
8-Lead Lead Frame Chip Scale Package (LFCSP_VD)
Evaluation Board
Evaluation Board
Z = RoHS Compliant Part, # denotes RoHS compliant product, may be top or bottom marked.
©2003–2008 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D03335-0-9/08(C)
Rev. C | Page 16 of 16
Package Option
RM-8
RM-8
RM-8
RM-8
RM-8
RM-8
RM-8
RM-8
CP-8-2
CP-8-2
CP-8-2
CP-8-2
RM-8
RM-8
RM-8
RM-8
RM-8
RM-8
RM-8
CP-8-2
CP-8-2
CP-8-2
Branding
W4B
W4B
W4B
W4B
W4B#
W4B#
W4B#
W4B#
W4B
W4B
W4B#
W4B#
W5B
W5B
W5B
W5B
S1X
S1X
S1X
W5B
W5B
S1X
Similar pages