ETC AZ852PN-3DE Microminiature polarized relay Datasheet

AZ852
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Conforms to IEC60950/UL60950/EN60950
spacing and high breakdown voltage
Supplementary insulation
mains voltage 250 Vrms (SMT); 200 Vrms (THT)
Pollution Degree 2 (external); 1 (internal)
• Monostable and bistable (latching) coil versions available
• High dielectric and surge voltage:
2.5 KV surge (per Bellcore TA–NWT–001089)
2.5 KV surge (per FCC Part 68)
1,000 Vrms, open contacts
• Stable contact resistance for low level signal switching
• Epoxy sealed
• UL, CUR pending
CONTACTS
GENERAL DATA
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
1 x 105 at 0.5 A, 125 VAC, Res.
1 x 105 at 2.0 A, 30 VDC, Res.
Operate Time
(typical)
1 ms at nominal coil voltage
Release Time (typical)
1 ms at nominal coil voltage
(with no coil suppression)
Bounce (typical)
At 10 mA contact current
1 ms at operate or release
0.5 A at 125 VAC
2.0 A at 30 VDC
0.24 A at 220 VDC
Capacitance
< 2 pF at 10 KHz - coil to contacts
< 1 pF at 10 KHz - between open contacts
< 2 pF at 10 KHz - between contact sets
Material
Palladium Ruthenium; gold clad
< 50 milliohms initially at 20 mV, 10 mA
Dielectric Strength
(at sea level)
See table
Resistance
Dropout
Greater than 10% of nominal coil voltage
Insulation Resistance
109 ohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
Operational, 20 g, 10–1,000 Hz
Shock
Operational, 50 g min., 11 ms
Non-destructive, 500 g min., 0.5 ms
Enclosure
P.B.T. polyester, UL 94 V-0
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
10 seconds
Weight
0.8 grams
Packing unit in pcs
50 per plastic tube, 1000 per carton box
1000 per reel, 1000 or 5000 per carton box
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage: 220 VDC* or 250 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL/CUR
COIL (Polarized)
Power
At Pickup Voltage
(typical)
79 mW (3–12 VDC)
98 mW (24 VDC)
Max. Continuous
Dissipation
0.73 W at 20°C (68°F)
Temperature Rise
At nominal coil voltage
21°C (38°F) (3–12 VDC)
30°C (54°F) (24 VDC)
Temperature
Max. 115°C (239°F)
NOTES
1.
2.
3.
4.
5.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
Specifications subject to change without notice.
Ultrasonic cleaning is not recommended.
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2005-03-11
EU
AZ852
RELAY ORDERING DATA
NON-LATCHING VERSION
Max. Continuous
VDC
3.4
Coil Resistance
Ohm ± 10%
16
ORDER NUMBER
Gull Wing*
Nominal Coil
VDC
1.5
Must Operate
VDC
1.13
3
2.10
6.8
64
AZ852N–3DE
AZ852G–3DE
AZ852J–3DE
4.5
3.15
10.3
145
AZ852N–4.5DE
AZ852G–4.5DE
AZ852J–4.5DE
5
3.50
11.4
178
AZ852N–5DE
AZ852G–5DE
AZ852J–5DE
6
4.20
13.7
257
AZ852N–6DE
AZ852G–6DE
AZ852J–6DE
9
6.30
20.4
574
AZ852N–9DE
AZ852G–9DE
AZ852J–9DE
12
8.40
27.3
1,028
AZ852N–12DE
AZ852G–12DE
AZ852J–12DE
24
16.80
45.6
2,880
AZ852N–24DE
AZ852G–24DE
AZ852J–24DE
THT
AZ852N–1.5DE
AZ852G–1.5DE
J-Leg*
AZ852J–1.5DE
LATCHING VERSION
Max. Continuous
VDC
4.1
Coil Resistance
Ohm ± 10%
23
ORDER NUMBER
Gull Wing*
Nominal Coil
VDC
1.5
Must Operate
VDC
1.13
3
2.25
8.1
90
AZ852PN–3DE
AZ852PG–3DE
AZ852PJ–3DE
4.5
3.38
12.1
203
AZ852PN–4.5DE
AZ852PG–4.5DE
AZ852PJ–4.5DE
5
3.75
13.5
250
AZ852PN–5DE
AZ852PG–5DE
AZ852PJ–5DE
6
4.50
16.2
360
AZ852PN–6DE
AZ852PG–6DE
AZ852PJ–6DE
THT
AZ852PN–1.5DE
AZ852PG–1.5DE
J-Leg*
AZ852PJ–1.5DE
9
6.75
24.2
810
AZ852PN–9DE
AZ852PG–9DE
AZ852PJ–9DE
12
9.00
32.3
1,440
AZ852PN–12DE
AZ852PG–12DE
AZ852PJ–12DE
24
18.00
41.9
2,880
AZ852PN–24DE
AZ852PG–24DE
AZ852PJ–24DE
* Available only in Tape and Reel available (1K pcs/reel minimum)
INITIAL DIELECTRIC STRENGTH (minimum)
VRMS, 1 min.
SURGE
Peak (V)
Rise Time (µs)
Decay Time* (µs) (1/2 peak)
Between open contacts
1,000
1,500
2 (10)
10 (160)
Between contact sets
1,000
1,500
2 (10)
10 (160)
Between coil and contacts
1,800
2,500
2 (10)
10 (160)
* Decay time measured from beginning of surge.
Temperature Profile
Recommended Soldering Profile according CECC 00802
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2005-03-11
EU
AZ852
MECHANICAL DATA
PC BOARD LAYOUT
WIRING DIAGRAM
Narrow Version
Narrow Version
Non-latching type
not energized condition
ø min 0.75
TOP VIEW
Gull Wings
Gull Wings
Latching type, 1 coil
RESET condition
J Legs
J Legs
TOP VIEW
VIEWED TOWARD TERMINALS
DIMENSIONS
NARROW
L
W
H
T
T1
T2
D1
D2
Tw
S
mm
10 ±0.08
5.7 ±0.3
5.85 -0.15
3.2
N/A
3.2 ±0.1
3.2 ±0.15
2.2 ±0.15
0.4
0.3 ±0.05
ZETTLER
inch
0.393 ±0.003
0.224 ±0.012
0.230 -0.006
0.125
N/A
0.126 ±0.006
0.126 ±0.006
0.087 ±0.006
0.015
0.011 ±0.002
GULL WINGS
mm
10 ±0.08
6 ±0.08
5.65 -0.2
N/A
7.5 ±0.3
5.08 ±0.1
3.2 ±0.15
2.2 ±0.15
0.4
N/A
inch
0.393 ±0.003
0.236 ±0.003
0.222 -0.008
N/A
0.295 ±0.011
0.200 ±0.004
0.126 ±0.006
0.087 ±0.006
0.015
N/A
J-LEGS
mm
10 ±0.08
6 ±0.08
5.65 -0.2
N/A
2.8 ±0.2
5.08 ±0.1
3.2 ±0.15
2.2 ±0.15
0.4
N/A
inch
0.393 ±0.003
0.236 ±0.003
0.222 -0.008
N/A
0.110 ±0.007
0.200 ±0.004
0.126 ±0.006
0.087 ±0.006
0.015
N/A
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2005-03-11
EU
AZ852
Packaging Specifications
Tape and reel for SMT version - 1000 relays per reel, 1000 or 5000 relays per box
Reel dimension
Tube for THT version - 50 relays per tube, 1000 relays per box
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2005-03-11
EU
Similar pages