Email: [email protected] Website: www.olitech-elec.com MB2S THRU MB10S Single Phase 0.8 AMPS. Silicon Bridge Rectifiers Voltage Range 200to 1000Volts MBS F eatures .014(0.35) .006(0.15) • Ideal for printed circuit board • Reliable low cost construction technique .083(2.12) .043(1.10) - results in inexpensive product • High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension + .008(0.20) MAX .157(4.00) .276(7.0) .142(3.60) MAX ~ ~ 。 5 .102(2.60) .087(2.20) .193(4.90) .177(4.50) Mechanical Data .208(5.30) .205(5.20) .043(1.10) .028(0.70) • Case: Molded plastic • Lead: solder plated • Polarity: As marked .053(1.53) .037(0.95) .062(1.60) .054(1.40) .053(1.53) .037(0.95) .106(2.70) .090(2.30) .118(3.0) MAX .033(0.84) .022(0.56) Dimensions in inches and (millimeters) Weight:0.115 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current On glass-epoxy P.C.B. On aluminum substrate Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 0.5A Maximum DC Reverse Current @ TA=25℃ rated DC blocking voltage per leg TA = 125℃ Typical junction capacitance per leg at 4.0V.1MHz Typical Thermal Resistance (Note1) (Note2) Operating Temperature Range Storage Temperature Range VRRM VRMS VDC MB2S MB4S MB6S MB8S MB10S UNITS 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V I(AV) 0.5 0.8 A IFSM 30 A VF 1.0 V IR 5.0 500 μA 13 pF RθJA RθJL 70 20 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ CJ NOTE：1.On aluminum suvstrate P.C.B. with an area of 0.8×0.8”(20×20mm) mounted on 0.05×0.05”(1.3×1.3mm) solder pad. 2.On glass epoxy P.C.B. mouted on 0.05×0.05”(1.3×1.3mm) pads. OLITECH ELECTRONICS CO. LTD. Page:P2-P1 Email: [email protected] Website: www.olitech-elec.com RATING AND CHARACTERISTIC CURVES MB2S THRU MB10S PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - MAXIMUM NON-REPETITIVE SURGE CURRENT 40 30 20 10 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz OLITECH ELECTRONICS CO. LTD. Page:P2-P2