CHEMI-CON ERHA551LGC103MGL0M Large capacitance aluminum electrolytic capacitor Datasheet

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85℃
RHA
Series
RHA
・Realized higher voltage than RWF series (500 to 650Vdc)
・Endurance with ripple current : 5,000 hours at 85℃
・Suitable for high voltage inverter
・RoHS compliant
Higher voltage
RWF P302
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
-25 to +85℃
500 to 650Vdc
±20% (M)
I=0.02CV or 5mA, whichever is smaller.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
Insulation Resistance
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
0.25 max.
(at 20℃, 120Hz)
Capacitance change C(-25℃)/C(+20℃)≧0.6
(at 120Hz)
When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering
the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ.
When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp
on the insulating sleeve covering the case, there shall not be electrical damage.
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85℃.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
Insulation
Withstanding Voltage
Endurance
Shelf Life
◆DIMENSIONS (Screw-Mount) [mm]
● Mounting
Clamp Code : B
● Mounting
4.5
B±1
F±1
φD+1.8max.
Sleeve (Pb-free PVC : Black)
6
30°±5°
Vent
45°±5°
8
J
G±1
L+4max.
Plastic disk
φD
50
63.5
76.2
φ50 &φ63.5 : G=6
φ76.2 &φ89 : G=5
φ100 : G=10
<Screw specifications>
toφ89 Plus hexagon-headed screw :M5×0.8×10
Clamp Code : C
360°
3
A±1
W±1
F
W
B
A
78.0 64.0 68.0 22.4
90.0 76.0 80.0 28.0
104.5 90.0 93.5 31.5
φD
50
63.5
76.2
89
100
4.5
Code : LG
K±1
E±1
● Terminal
E
32.5
38.1
44.5
50.8
56.5
K
37.0
43.5
50.0
56.5
63.4
F
22.4
28.0
31.5
31.5
41.5
J
14.0
14.0
14.0
16.0
18.0
Cross-recessed head (phillips) screw : M8×1.25×16
Spring washer,Washer
Maximum screw tightening torque :6.31Nm
* The screw and the mounting clamp are separately supplied and not attached to the product.
Maximum screw tightening torque :3.23Nm
φ100
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E RH A AAA LG N AAA M AAA M
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6,800µ F:682, 12,000µ F:123)
Mounting clamp code (N, B, C)
Terminal code
Voltage code (ex. 500V:501, 650V:651)
Series code
Category
Please refer to "Product code guide (screw-mount terminal type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
314
CAT. No. E1001Q
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85℃
RHASeries
◆STANDARD RATINGS
WV
(Vdc)
500
550
Cap
(µF)
1,200
1,500
1,800
2,200
2,700
3,300
3,900
3,900
4,700
5,600
5,600
6,800
8,200
10,000
12,000
15,000
1,000
1,200
1,500
1,800
2,200
2,700
2,700
3,300
3,300
3,900
4,700
4,700
Rated ripple
current
Case size
tanδ
(Arms/
φD×L(mm)
85℃,120Hz)
50×95
50×115
50×130
50×150
63.5×120
63.5×140
63.5×170
76.2×130
76.2×150
76.2×170
89×130
89×150
89×190
89×210
100×210
100×250
50×95
50×110
50×130
63.5×105
63.5×120
63.5×150
76.2×105
63.5×170
76.2×130
76.2×140
76.2×170
89×130
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
5.90
7.20
8.30
9.80
11.2
13.3
15.7
15.4
18.1
20.8
17.1
20.0
24.4
28.2
32.9
39.8
5.40
6.30
7.60
8.60
10.1
12.4
11.7
14.5
14.2
15.9
19.1
15.6
WV
(Vdc)
Part No.
ERHA501LGC122MC95M
ERHA501LGC152MCB5M
ERHA501LGC182MCD0M
ERHA501LGC222MCF0M
ERHA501LGC272MDC0M
ERHA501LGC332MDE0M
ERHA501LGC392MDH0M
ERHA501LGC392MED0M
ERHA501LGC472MEF0M
ERHA501LGC562MEH0M
ERHA501LGC562MFD0M
ERHA501LGC682MFF0M
ERHA501LGC822MFK0M
ERHA501LGC103MFM0M
ERHA501LGC123MGM0M
ERHA501LGC153MGR0M
ERHA551LGC102MC95M
ERHA551LGC122MCB0M
ERHA551LGC152MCD0M
ERHA551LGC182MDA5M
ERHA551LGC222MDC0M
ERHA551LGC272MDF0M
ERHA551LGC272MEA5M
ERHA551LGC332MDH0M
ERHA551LGC332MED0M
ERHA551LGC392MEE0M
ERHA551LGC472MEH0M
ERHA551LGC472MFD0M
550
600
650
Cap
(µF)
5,600
6,800
8,200
10,000
1,200
1,500
1,800
1,800
2,200
2,200
2,700
2,700
3,300
3,900
3,900
4,700
4,700
5,600
1,000
1,200
1,500
1,800
2,200
2,700
3,300
3,900
4,700
Rated ripple
current
Case size
tanδ
(Arms/
φD×L(mm)
85℃,120Hz)
89×150
89×170
100×170
100×200
63.5×95
63.5×110
63.5×125
76.2×95
63.5×145
76.2×110
63.5×170
76.2×125
76.2×145
76.2×170
89×130
76.2×190
89×150
89×170
63.5×100
63.5×110
63.5×130
63.5×150
63.5×170
76.2×150
76.2×170
89×155
89×190
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
18.2
21.1
24.8
29.4
6.70
8.00
9.30
9.10
11.0
10.8
13.1
12.6
14.9
17.3
14.2
20.0
16.6
19.1
6.30
7.20
8.60
10.1
11.7
13.6
15.8
15.3
18.4
Part No.
ERHA551LGC562MFF0M
ERHA551LGC682MFH0M
ERHA551LGC822MGH0M
ERHA551LGC103MGL0M
ERHA601LGC122MD95M
ERHA601LGC152MDB0M
ERHA601LGC182MDC5M
ERHA601LGC182ME95M
ERHA601LGC222MDE5M
ERHA601LGC222MEB0M
ERHA601LGC272MDH0M
ERHA601LGC272MEC5M
ERHA601LGC332MEE5M
ERHA601LGC392MEH0M
ERHA601LGC392MFD0M
ERHA601LGC472MEK0M
ERHA601LGC472MFF0M
ERHA601LGC562MFH0M
ERHA651LGC102MDA0M
ERHA651LGC122MDB0M
ERHA651LGC152MDD0M
ERHA651LGC182MDF0M
ERHA651LGC222MDH0M
ERHA651LGC272MEF0M
ERHA651LGC332MEH0M
ERHA651LGC392MFF5M
ERHA651LGC472MFK0M
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency (Hz)
Coefficient
50
0.8
120
1.0
300
1.2
1k
1.3
3k
1.4
Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every
5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RHA series
capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative
of Nippon Chemi-Con.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
315
CAT. No. E1001Q
Similar pages