SL Power MENB1150A1551F01 Medical switch-mode power supply Datasheet

MENB1150
Universal Input 150 Watt Series
Medical Switch-Mode Power Supply
3 Year Warranty
•90-264VAC Universal Input
•Meets Efficiency Level V, EU (EC) No 278/2009 Phase II
rd
•Meets UL/EN/IEC60601-1, 3
Edition, 2xMOPP
•Desktop Style
•12V to 24V Single Output Models, up to 150W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No Load Power Consumption <0.5W
International Safety Agency Approvals
RoHS
All Specifications are typical at nominal input, full load at 25C unless otherwise stated.
Specifications
AC Input
100-240Vac, +/-10%, 47-63 Hz, 1
Input Current
Inrush Current
Input Fuse
Hold-up Time
60A peak @ 264Vac, cold start
Turn-on Time
3.15A, 250V Internal Primary Current Fuse provided
Efficiency
MTBF
100 Vac: 2.5 A
Meets Efficiency Level V, ErPII
100,000 hours calculated
18 mS min @ 110Vac, 21mS min @ 240 Vac
2 sec max @110/240Vac
Output Rise Time
200mS max @ 11//240Vac
Overload Protection
Hiccup Mode
Output Voltage
See chart
Short Circuit Protection
Hiccup Mode
Output Power
See chart
Topology
Ripple and Noise
1% pk-pk max., 20MHz BW
Line/Load Regulation
Excluding Cord: Line: +/- 1%, Load: +/-5%
500μs max., 50% load step, typical
Transient Response
Minimum Load
Not required
Case Material
Case Dimensions
Black 94V0 Polycarbonate
212mm x 67mm x 48mm, see mechanical drawing
Weight
700g
Safety and EMC Approvals
Dielectric Withstand
Switching – Fixed Frequency Flyback
EN/IEC/CSA/UL60601-1, 3rd Edition
EMC: See chart
Input-Output: 2 x MOPP
Input-GND:1 x MOPP, Output-GND: 500Vdc
Operating Temperature
0 to 40C, no derating
Storage Temperature
Relative Humidity
-30 to +85C
5% to 95%, non-condensing
Altitude
0 to 10,000 ft
Output Connections
Cable: 18AWG UL2464, 1200mm, 4 conductor
Connector: Ault #51, 6-pin Molex, other options available
EMI/EMC Compliance
Conducted Emissions
EN55011/22, Class B
Radiated Emissions
EN55011/22, Class B
Line Frequency Harmonics
EN61000-3-2
Voltage Fluctuations
EN61000-3-3, Line Flicker
Static Discharge Immunity
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge, Criteria A
Radiated RF Immunity
EN61000-4-3, 3V/m, Criteria A
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz, Criteria A
Line Surge Immunity
EN61000-4-5, 1kV diff., 2kV common-mode, Criteria A
Conducted RF Immunity
EN61000-4-6, 3Vrms, Criteria A
Power Frequency Magnetic Field Immunity
EN61000-4-8, 3A/m, Criteria A
Voltage Dip Immunity
EN61000-4-11, 100% dip, 10mS, Crit. A; 60% dip, 100mS, Crit. A; 30%
dip, 500mS, Crit. C; 100%, 5000mS, Crit. C.
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp  6050 King Drive Ventura, CA 93003  Phone 805.486.4565  Fax 858.712.2040  Email: [email protected]  www.slpower.com
MENB1150
Universal Input 150 Watt Series
Medical Switch-Mode Power Supply
Model Number
3 Year Warranty
Volts (V)
Output Current (max)
Max Watts
Ripple (Vp-p max)
MENB1150A1251F01
12 V
12.5 A
150 W
120mV
MENB1150A1551F01
15 V
10.0 A
150 W
150mV
MENB1150A1851F01
18 V
8.3 A
150 W
180mV
MENB1150A2451F01
24V
6.25 A
150 W
240mV
Model Number Key
MENB 1 150 A 12 51 F 01
Model
Input Connector:
Output Connector:
Output Voltage:
Model
Output Pow er:
# of Outputs
Product Fam ily:
"01" = Standard. "02" and higher indicates a m odified model.
"F" = IEC320 C14 grounded. Other options available, see below .
"51" = Molex 39-01-2060. Other options available.
"12" = 12Vdc, "15" = 15Vdc, etc.
A = Original Configuration
"150" = 150 Watts
"1" = Single Output
"M" = Medical, "E" = External, "NB" = Model Series Designator
Connector Information
Input Connector Options
Class I (grounded) Inlet:
“F” = IEC60320 C14
Class II (ungrounded) Inlets:
“N” = IEC60320 C8
“Q” = IEC60320 C18
DC Output Connector
Output Connector Options
Pinout
“51” = 6 pin, Molex 39-01-2060 or equiv. Pins 1,4: +Vout
Pins 3,6: -Vout
Pins 2,4: NC
Mating Connector
Molex 39-01-3063
or equiv.
Outline Drawing
“F” Inlet shown.
Other options
available, see above.
Data Sheet © 2013 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 11-18-13
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp  6050 King Drive Ventura, CA 93003  Phone 805.486.4565  Fax 858.712.2040  Email: [email protected]  www.slpower.com
Similar pages