Crydom H16WD6050-10 H16wd sery Datasheet

Panel Mount
Datasheet
H16WD Series
• Ratings from 25A to 90A @ 48-690 VAC
• 1600 Volts Blocking
• SCR output for heavy industrial loads
• Zero voltage or instantaneous turn-on outputs
• UL/CSA/VDE Approved, CE Compliant to EN60950-1
• Improved SEMS screw and washer
• Redesigned housing with anti-rotation barriers
• DC control
• Direct Bond Copper substrate
• EMC Compliant to Level 3
• Direct Power Lead Frame
• Epoxy Free Design
For Generation 3 datasheet click here
PRODUCT SELECTION
Control Voltage
25A
4-32 Vdc
50A
H16WD6025
H16WD6050
75A
90A
H16WD6075
H16WD6090
AVAILABLE OPTIONS
Series
H1
Transient Overvoltage
6WD: 1600 Vpk
6WD
60
Rated Load Current
25: 25 Amps
50: 50 Amps
75: 75 Amps
90: 90 Amps
25
Operating Voltage
60: 48-690 VAC
Required for valid part number
For options only and not required for valid part number
* Not all part number combinations are available.
Contact Crydom Technical Support for informacion on
the availability of a specific part number.
K
Input Status LED
Blank: Not Included
G: Included
G
H
Termination
Blank: Screw
F: Quick Connect (1)
(Up to 50 Amps models)
K: Hex standoffs (2)
Switching Type
Blank: Zero Voltage Turn-On
-10: Instantaneous Turn-On (3)
-10
Thermal Pad
Blank: Not Included
H: Included
OUTPUT SPECIFICATIONS (4)
Description
Operating Voltage (47-440Hz) [Vrms]
Transient Overvoltage [Vpk]
Rated Load Current [Arms] (5)(2)
Rated Load Current {UL508 Motor Controller} [Arms] (5)
Minimum Load Current [mArms]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]
Maximum 1 Cycle Surge Current (50/60Hz) [Apk]
Maximum I²t for Fusing (50/60Hz) [A² sec]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum On-State Voltage Drop @ Rated Current [Vrms]
HP rating UL 508/IEC60947[HP (KW)]: 240 VAC
HP rating UL 508/IEC60947[HP (KW)]: 380 VAC
HP rating UL 508/IEC60947[HP (KW)]: 480 VAC
HP rating UL 508/IEC60947[HP (KW)]: 600 VAC
Minimum Power Factor (at Maximum Load)
25A
50A
75A
90A
48-690
1600
25
10
150
1.0
500
239/250
285/259
0.8
1.3
1.5 (1.1)
2 (1.5)
3 (2.2)
3 (2.2)
0.5
48-690
1600
50
20
150
1.0
500
597/625
1779/1621
0.45
1.3
3 (2.2)
5 (3.7)
5 (3.7)
10 (7.4)
0.5
48-690
1600
75
30
150
1.0
500
954/1000
4555/4150
0.3
1.2
5 (3.7)
7.5 (5.6)
10 (7.4)
15 (11.2)
0.5
48-690
1600
90
45
150
1.0
500
1145/1200
6560/5976
0.27
1.2
7.5 (5.6)
15 (11.2)
20 (14.9)
25 (18.6)
0.5
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
Panel Mount
Datasheet
INPUT SPECIFICATIONS (4)
Description
DC Control
Control Voltage Range
Minimum Turn-On Voltage (6)
Must Turn-Off Voltage
Maximum Reverse Voltage
Minimum Input Current @ Minimum Voltage (for on-state)
Maximum Input Current @ Maximum Voltage
Nominal Input Impedance
Maximum Turn-On Time [msec] (7)
Maximum Turn-Off Time [msec]
4-32 VDC
4.0 VDC
1.0 VDC
-32 VDC
7mA
12mA
Current Regulated
1/2 Cycle
1/2 Cycle
GENERAL SPECIFICATIONS (4)
Description
Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
4000 Vrms
109 Ohm
8 pF
-30 to 80 °C
-40 to 125 °C
2.6 oz (74.9 g)
UL 94 V-0
18-20 (2-2.2)
Aluminum
13-15 /1.5-1.7
18-20 (2-2.2)
18-20 / 2.0-2.2
w/”K” option 8-10 / 0.9-1.13
#6-32 UNC / #8-32 UNC
93% non-condensing
w/”G” option (green)
11,641,553 hours (1,328 years)
7,210,376 hours (823 years)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Housing Material
SSR Mounting Torque Range [in lbs/Nm]
Baseplate Material
Input Terminal Screw Torque Range [in-lb/Nm]
Output Terminal Screw Torque Range [in lb/Nm]
SSR Mounting Screw Torque Range [in-lb/Nm]
Input/Load Terminal Screw Torque Range [in-lb/Nm] (2)
Input/Output Terminal Screw Thread Size
Humidity per IEC60068-2-78
LED Input Status Indicator
MTBF (Mean Time Between Failures) at 40°C ambient temperature (8)
MTBF (Mean Time Between Failures) at 60°C ambient temperature (8)
WIRING DIAGRAM
AC
2 ( )
Wire Size
(Solid / Stranded)
Terminals
Input
24 AWG (0.2 mm2) / 0.2 [minimum]
10 [44.5]
2 x 12 AWG (3.3 mm2) / 3.3 [maximum]
90 [400]
20 AWG (0.5
1
2
OUTPUT
Output
4
INPUT
4 (–)
mm2)
/ 0.518 [minimum]
30 [133]
2 x 10 AWG (5.3 mm2) / 5.3
2 x 8 AWG (8.4
S O L I D S TAT E R E L AY
Wire Pull-Out
Strength (lb)[N]
mm2)
110 [490]
/ 8.4 [maximum]
90 [400]
25
Input Current (mA)
Load (9)
1 ( )
Input Current vs Input Voltage
Standard Regulated DC Input
Recommended Wire Sizes
V
20
15
10
5
0
0
3
5
10
15
20
DC Input Voltage
3 (+)
EQUIVALENT CIRCUIT BLOCK DIAGRAM
-DC 4
1 AC
(10)
+DC 3
Trigger
Circuit
Current
Limiter
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
2 AC
25
30
Panel Mount
Datasheet
MECHANICAL SPECIFICATIONS (4)
Tolerances: ±0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]
Screw Termination
1.1
[27.9]
0.49
[12.4]
1
1.88
[47.6]
OUTPUT
INPUT
1.1
[27.9]
0.49
[12.4]
0.89
[22.6]
Mounting
Hole/Slot
0.19 [4.9]
DIA.
1
2
2.25
[57.3]
1.7
[43.2]
S O L I D S TAT E R E L AY
4
Hex Standoff Termination (“K” Option) (2)
1.88
[47.6]
OUTPUT
INPUT
1.58
[40.2]
0.49
[12.4]
1
1.88
[47.6]
OUTPUT
Faston Terminal(11)
0.25 x 0.032
INPUT
1.40
[35.6]
1.75
[44.5]
(4 places)
1.0
[25.4]
Quick Connect Termination (“F” Option) - Up to 50 Amp (1)
1.31
[33.4]
2
1.88
[47.6]
3
(2 places)
1.25
[31.8]
GENERAL NOTES
1.31
[33.4]
0.45
[11.4]
OUTPUT
2
INPUT
0.49
[12.4]
1.40
[35.6]
1.75
[44.5]
2.25
[57.3]
1.7
[43.2]
S O L I D S TAT E R E L AY
4
Faston Terminal(11)
0.187 x 0.020
(4 places)
(2 places)
1
2.25
[57.3]
1.7
[43.2]
Faston Terminal(11)
0.25 x 0.032
1.58
[40.2]
0.63
[16.0]
Mounting
Hole/Slot
0.19 [4.9]
DIA.
(2 places)
S O L I D S TAT E R E L AY
4
0.93
[23.6]
(2 places)
Quick Connect Termination (“F” Option) - Up to 25 Amp (1)
Mounting
Hole/Slot
0.19 [4.9]
DIA.
3
1.75
[44.5]
1.75
[44.5]
2.25
[57.3]
1.70
[43.2]
1.0
[25.4]
1.0
[25.4]
1.04
[26.4]
2
S O L I D S TAT E R E L AY
4
3
Mounting
Hole/Slot
0.19 [4.9]
DIA.
3
Faston Terminal(11)
0.187 x 0.020
(2 places)
1.25
[31.8]
(1) Single pair (up to 25A) Double pair* (50A model only). *Caution: User must connect to both pairs.
(2) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50 Amps.
For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support.
(3) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.
(4) All parameters at 25°C unless otherwise specified.
(5) Heat sinking required, see derating curves.
(6) Increase minimum voltage by 1V for operations from -20 to -30°C.
(7) Turn-on time for Instantaneous turn-on versions is 0.02 msec.
(8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report)
(9) Load can be wired to either SSR output terminal 1 or 2.
(10) Elective Input Status LED, “G” option.
(11) Mechanical dimensions vary from G3 models.
For additional information or specific questions, contact Crydom Technical Support.
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
Panel Mount
Datasheet
SURGE CURRENT INFORMATION
50 A
600
200
500
Surge Current (Amp)
Surge Current (Amp)
25 A
250
150
100
50
0
0.01
0.1
1
Surge Duration (Secs)
400
300
200
100
10
0
0.01
10
1200
1050
900
750
600
450
300
150
0
0.01
0.1
Surge Current (Amp)
Surge Current (Amp)
10
90 A
75 A
900
800
700
600
500
400
300
200
100
0
0.01
1
Surge Duration (Secs)
0.1
1
Surge Duration (Secs)
0.1
1
Surge Duration (Secs)
10
Non repetitive peak surge current at Tj initial 40ºC.
THERMAL DERATE INFORMATION
25 A
1.5ºC/W
50 A
2ºC/W
3ºC/W
0.7ºC/W
20
15
10
5
0
20
30
40
50
60
70
Ambient Temperature (ºC)
40
30
20
10
0
80
20
30
40
50
60
70
Ambient Temperature (ºC)
75 A
0.5ºC/W
0.7ºC/W
0.5ºC/W
1.5ºC/W
Load Current (Amps)
Load Current (Amps)
60
45
30
15
20
30
80
90 A
1ºC/W
75
0
2ºC/W
1.5ºC/W
50
Load Current (Amps)
Load Current (Amps)
25
1ºC/W
40
50
60
70
Ambient Temperature (ºC)
80
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
90
80
70
60
50
40
30
20
10
0
20
30
0.7ºC/W
1ºC/W
1.5ºC/W
40
50
60
70
Ambient Temperature (ºC)
80
Panel Mount
Datasheet
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
IEC 61000-4-2 : Electrostatic Discharge – Level 3
IEC 61000-4-4 : Electrically Fast Transients – Level 3
IEC 61000-4-5 : Electrical Surges – Level 3
IEC 600068-2-6: Vibration 0.33mm and 0.75mm Amplitude over 10-55 Hz
IEC 600068-2-27: Shock Resistance 15g/11ms
E116949
ACCESORIES
Recommended Accessories
New Accessories!
Protective Cover & Hardware Kits
Protective Cover
Part number: KS101
Clear plastic cover compatible with all new
S1 designs. Safety covers provide added
protection from electric shock when
installing or checking equipment.
Cover
Hardware
Kit
KS101
HK1
HS501DR
5.0
TRM1
HSP-1
HK4
HS301 / HS301DR
3.0
TRM6
HSP-2
HS251
2.5
HS202 / HS202DR
2.0
HS201 / HS201DR
2.0
HS172
1.7
HS151 / HS151DR
1.5
HS122 / HS122DR
1.2
HS103 / HS103DR
1.0
HS101
1.0
HS073
0.7
HS072
0.7
Hardware Kit
Part number: HK4
Bag with 2 square brass accessories and 2
screw 8-32 x 5/8 for output. Used to mount
TMR1 lug terminals.
Heat Sink
Part No.
Thermal Resistance Lug Terminal Thermal Pad
[ºC/W]
HS053
0.5
HS033
0.36
HS023
0.25
Rev. 040616
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
Panel Mount
Datasheet
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
• Disconnect all
power before
installing or
working with
this equipment.
• Verify all
connections
and replace all
covers before
turning on
power.
Failure to follow
these
instructions will
result in death
or serious injury.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
• Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
con este equipo.
• Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
el equipo.
El
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
RISQUE DE
DESCHARGE
ELECTRIQUE
OU EXPLOSION
• Eteindre
toutes les
sources
d'énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
• Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
• Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
Gerät Arbeiten
durchführen
• Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
Abdeckungen
ersetzen.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
Verletzungen
führen.
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSIONE.
• Spenga tutta
l'alimentazione
che fornisce
questa
apparecchiatura
prima di lavorare
a questa
apparecchiatura
存在电击、
爆炸或电弧
闪烁危险
•
在操作此设
备之前请先
关闭电源。
若不遵守这些说明,
可能会导致严重的
人身伤害甚至死亡。
• Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima
dell’accensione
L'omissione di
queste istruzioni
provocherà la
morte o
lesioni serie
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
• The product's side panels may be hot, allow
the product to cool before touching.
• Follow proper mounting instructions including
torque values.
• Do not allow liquids or foreign objects to enter
this product.
• Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
• Respecter les consignes de montage, et
notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
• Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder
Fremdkörper in das Produkt ein.
Le non-respect de cette directive peut entraîner,
Failure to follow these instructions can result in des lésions corporelles graves ou des
serious injury, or equipment damage.
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
CALDO
材料损坏和高温外壳的危险性
• Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en
particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos
extraños en el producto.
• I pannelli laterali dell'apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo
apparecchio.
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
La mancata osservanza di questa precauzione può
causare gravi rischi per l'incolumità personale o
danni alle apparecchiature.
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
• 产品的一侧面板可能很热,在其冷却前请
不要触碰。
• 遵照正确的安装说明,包括扭矩值。
• 请勿让液体及其他异物进入本产品。
如不能正确执行这些操作说明,
极有可能造成严重人体伤害或者设备的损坏。
Panel Mount
Datasheet
ANNEX - ENVIROMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr (VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 - 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,
电子信息产品污染控制标识要求。
部件
名称
铅
汞
镉
有毒有害物质或元素
六价铬
多溴联苯
(Pb)
(Hg)
(Cd)
(Cr (VI))
半导体芯片
焊接点
50
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
(PBB)
多溴二苯醚
(PBDE)
Similar pages